Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet
Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet
Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet If the magnet it out of place, the coffee machine may shut off randomly. You will need to realign the magnet.
Written By: Alexander Vo
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet
INTRODUCTION The magnet is located in the water reservoir of the brewer and functions as a water level sensor that detects when the coffee maker needs to be refilled with water.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet
Step 1 — Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet
Before starting the repair, make sure that the device is unplugged and the water reservoir is empty.
Detach the water reservoir from the brewer by lifting the reservoir vertically from the device.
Step 2
The magnet is located in the bottom of the reservoir.
Remove the grey lid from the top of the reservoir.
Insert your hand and manually realign the magnet to where it slides freely in its enclosed area.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-22 09:59:48 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet If the magnet it out of place, the coffee machine may shut off randomly. You will need to realign the magnet.
Written By: Alexander Vo
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet
INTRODUCTION The magnet is located in the water reservoir of the brewer and functions as a water level sensor that detects when the coffee maker needs to be refilled with water.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet
Step 1 — Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet
Before starting the repair, make sure that the device is unplugged and the water reservoir is empty.
Detach the water reservoir from the brewer by lifting the reservoir vertically from the device.
Step 2
The magnet is located in the bottom of the reservoir.
Remove the grey lid from the top of the reservoir.
Insert your hand and manually realign the magnet to where it slides freely in its enclosed area.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Adjusting Keurig K75 Platinum Brewing System Reservoir Magnet
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-22 09:59:48 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
