Affordable Laser Solutions for All Materials - Plasquip
Affordable Laser Solutions for All Materials
Powered by Golden Laser
www.plasquip.com.au plasquip.com.au
Whatever the volume or scope of your manufacturing operations, talk to PLASQUIP SALES today about a Laser Cutting & Engraving Machine solution that will not only meet but also exceed your requirements. Tell us what you are looking for, and we can provide personal consultation through our vast experience with this technology to provide a comprehensive and tailored solution to your specific applications. PLASQUIP entered the world of Laser Cutting & Engraving Machines through it’s long association with the Plastics, Display, and Signage Industries here in Australia and New Zealand with the CO2 Laser Systems – this has since progressed rapidly so that we can now provide a total solutions package in YAG Laser and Fibre Laser Machines for a broad spectrum of different industries. As you browse through this brochure, you will see our range of standard Laser Cutting & Engraving Machines, but don’t think you need to limit yourself to this – we can provide bespoke solutions to your specific requirements including accessories such as Auto-Feed/Unload Systems and Roll-Feed Systems for Flexible Materials. To make it easier to identify the correct models for you, we have colour-coded a Quick Reference Guide as follows: GREEN Cutting Non-Metallic Materials RED Cutting Metallic Materials BLUE Engraving Non-Metallic Materials GOLD Engraving Metallic Materials When you have identified which Laser Cutting & Engraving Machines will process the materials in your application, then consider the following: • Do I want to be able to load a full sheet onto the machine, and do I have the room for a Flat-Bed Laser System? • Maybe a Fully Enclosed System would be best for me as it will occupy a smaller footprint and will be closed off from the surrounding work environment?
Australia-Wide Laser Technician Support PLASQUIP has a network of qualified Laser Technicians who can handle the initial Installation/Commissioning/Operator Training, and in most cases, the same technician will look after any ongoing warranty and servicing requirements in order to provide efficient personal service. As an integral part of your manufacturing processes, you need local support, and we can provide it, backed up by networking between our Laser Technicians, excellent FactoryBased Technical Support, and a large local Spare Parts inventory. We look forward to providing consultation to provide the best Laser Cutting & Engraving Machine solution for your specific requirements.
All products featured in this brochure are subject to PLASQUIP Terms & Conditions (copy available on request). E & O.E.
Laser Cutting & Engraving Machines JG-7040 Specifications • Laser power: 50W CO2 glass laser tube • Working area: 700 x 400 (mm)
• Working platform: Up and down working table • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
Advantages • Compact design, easy to move and ideal for smaller workshops. Also suitable for demo room or exhibitions. • Save space and money. • Very precise engraving effects at high speed.
The compact Laser Engraving Machine solution
• Closed design, professional exhaust system, ensuring safety and clean processing.
JG-10060 Specifications
Compact CompactDesign Designfor for Efficient EfficientCutting Cutting&& Engraving Engraving
• Laser safety: Class I laser safety • Laser type: Sealed CO2 Glass Laser Tube • Laser power: 65W / 80W • Working area: 1000*600 (mm) • Working platform: honeycomb working table or strip working table • Cutting (no-load) speed: 0—24000mm/min • Moving system: Offline stepping moving system, synchro belt moving • Repeating location: ±0.1mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc • Connection port: USB port, Internet port, U Disk. • Standard Accessories: Chiller Unit, Mini Air Pump, 550W Exhaust Fan
Features Includes a ‘pass-through’ feature for processing larger sheets then the Working Area. It is suitable for Engraving and Cutting on all kinds on non-metal material for a broad scope of applications, offering excellent quality with a low-budget investment.
FREEPHONE 1300 722 868
www.plasquip.com.au plasquip.com.au
Laser Cutting & Engraving Machines MJG-13090 SG Specifications • Laser type: Hermetic detached Co2 laser tube • Laser power: 80W/130W • Cutting area: 1300 X 900mm • Cutting speed: 0-24000mm/min • Engraving speed: 0-30000mm/min • Working platform: Knife strip working table with auto up and down function • Repeating location: ±0.1mm • Moving system: offline moving control system
Latest LatestRelease Release Cutting Cutting & Machine & Engraving Engraving Machine
• Laser power adjustment: following laser power adjustment • Power supply: 220V±5% 50/60HZ • Format support: AI, BMP, PLT, DXF, DST and etc • Standard Accessories: Chiller Unit, Mini Air Pump, 550W Exhaust Fan • Optional Accessories: 80W/130W glass laser tube
Features • The ‘Mars’ Series Laser Machines incorporate streamline mass-production technology in the laser industry and offer an ergonomic appearance, excellent performance, and easy maintenance. • Precision engrave and cut non-metallic materials such as acrylic, double-colour badges, wood, and marble.
JG-13090 Specifications • Laser type: Sealed CO2 laser tube or CO2 RF metal laser tube • Laser power: 65W, 80W, 130W glass tube or 100W, 150W, 200W RF metal tube. • Working area: 1300 x 900 (mm) • Working platform: honeycomb working table or knife strip working table • Cutting speed: up to 24m/min depending onload • Moving system: Offline stepping moving system, synchro belt moving Laser power adjustment: 0-100% Auto following control • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc • Standard Accessories: Chiller Unit, Upper & Lower Exhaust Fans, Mini Air Pump
Our most Popular Industrial Workhorse for Acrylic
• Optional Accessories: constant temperature water chiller
Features • Girder construction, stable working table ensuring high precision laser cutting. Strong flexibility, suitable for all kinds of laser cutting technical requirements.
www.plasquip.com.au plasquip.com.au
Laser Cutting & Engraving Machines JGSH-13090 SG Specifications • Laser type: Hermetic and detached CO2 laser tube. • Laser power: 50W and 80W or 130W, please select it if you need it for cutting and engraving separately, 80W or 130W laser tube for cutting, 50W laser tube for engraving, the two laser heads working can freely switch to the other, the engraving and cutting systems can automatically make the two laser heads working according to the pattern, the double system insures high-speed and precise engraving, the cutting is powerful, steady, smooth. • Working size: 1300x900mm. • Working table: Honeycomb or strip working table be selected • Cutting speed: 0-24000mm/min. • Automatic up and down working table, suitable for process different thickness materials cutting and engraving, the automatic up and down distance: 150mm. • Moving system: Offline stepping motor system, multi machine joint-online operate. • Power supply: AC220V/50HZ.
Dual-Power for Dual-Power System System for the theBEST BESTof ofboth bothWorlds Worlds
• Format support: AI, BMP, PLT, DXF, DST, etc • Standard Accessories: Chiller Unit & Protection System, 180W Exhaust Fan, Mini Air Pump
PJG-13090 SG Specifications • Laser power: 80W CO2 Glass laser tube, 65W/130W OPTIONAL • Laser type: DC Glass laser tube • Motor type: Step motor motion system • Working area: 1300mm x 900mm • Working platform: Aluminium strip knife table, OPTIONAL • Honeycomb table • Positioning accuracy: +/- 0.1mm • Power supply: AC 220V +/- 5% / 50HZ • Software formats supported: AI, BMP, PLT, DXF, DST etc.
Advantages • Extremely operator-friendly with the processing area and core area strictly separated, ensuring independent processing and stable performance of the core components. • Integrated aluminium pipe support and guide rail structure, offering a high stability operation which in turn produces better performance and cutting quality. • Moulded exterior panels and modular assembly for a very streamline appearance. • User-friendly electrical height-adjustable table for automatic positioning for different thickness materials, creating the best focus height and processing effects.
FREEPHONE 1300 722 868
NEW RELEASE Cutting and Engraving Machine
Laser Cutting & Engraving Machines JGSD-13090 DT Specifications • Laser type: Sealed CO2 Laser Tube • Laser power: 150W glass tube • Working area: 1300*900 (mm) • Working platform: knife strip working table • Cutting (no-load) speed: 0-24000mm/min • Moving system: Offline servo motor moving system, belt transmission • Laser power adjustment: 0-100% Auto following control • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc • Connection port: USB port, Internet port, U Disk. • Cooling system: Constant temperature water chiller • Standard Accessories: 550W Lower Exhaust Fans, Mini Air Pump
Features This Laser Cutting Machine is equipped with a 150W CO2 Glass Laser Tube and incorporates an Auto-Focus Cutting Head which allows it to cut thin stainless steel. The Cutting Head can automatically select the best focal length, ensuring the best focusing effects and cutting results for the uneven metal surface, yet still offering an excellent cutting performance for other non-metallic materials such as acrylic, wood etc.
Cut Acrylic AND Stainless Steel on the ONE Machine
www.plasquip.com.au plasquip.com.au
Large-Format Laser Cutting Machines
Australia’s best value - for Australia’s best value-forlarge - format moneymoney large-format Laser Laser Machinesolution solution Machine
CJG-130250 DT
Our most popular FLAT-BED CO2 Laser System
Specifications • Laser power: 130W CO2 RECI R6 glass laser tube • Motor type: Servo motor
• Working area: 2500 x 1300 (mm) • Working platform: Zinc-iron honeycomb table or strip panel working table • Cutting speed ~20 metre / minute depending on load • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
Features • The large format laser cutting bed suits outdoor signage, with its large working area and high-speed laser optics. • High cutting speeds are achieved with minimal laser optic loss. The machines demonstrate running stability and endurance. The open design is especially suited to large-format use. • The laser is professionally chilled to a constant temperature, enabling predictable usage regardless of ambient temperatures. • Strip panel working table reduces reflection when cutting transparent materials.
CJG-200300 DT
Applications:
Specifications
Large acrylic sheet, PMMA, LED board, MDF, balsa wood, laminated board, HPL, plastic, floorboard, dashboard, signage, banners, flags, furniture
BIG Brother to the CJG-130250DT • Laser power: 130W CO2 RECI R6 glass laser tube • Motor type: Servo motor
• Working area: 3000 x 2000 (mm) • Working platform: Strip panel working table • Cutting speed ~20 metre / minute depending on load • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
Our most popular FLAT-BED CO2 Laser System
FREEPHONE 1300 722 868
Large-Format Laser Cutting Machines JMSCJG-130250 Specifications • Working area: 1300mm x 2500mm • Working table: Strip working table • Laser type: CO2 RF metal laser tube or Chinese glass laser tube • Laser power: 100W, 150W, 275W, 500W metal tube
High Speed and High Capacity Flat-Bed System
• Cutting (no-load) speed: 0-24000mm/min • Repeating location: ±0.1mm • Cooling mode: Constant temperature water cooling chiller • Controlling system: 5 inches LCD display digital system • Moving system: Servo motor moving system, high precision ball screw moving technology • Focus lens: The lens and mirror are all from American company II-VI • Air blow: normal air blow with air pressure can be adjust from the cutting head • Top Exhaust: attached to the lens mount • Bottom Exhaust: following exhaust system The bottom exhaust is fixed under the laser head and move together with the laser head • Electricity Requirement: AC 220V or 380V, 50HZ • Format support: AI, PLT, DXF, etc • Standard Accessories: Constant-Temperature Water Chiller, Travelling Top & Bottom Exhaust System, Medium Pressing Exhaust Device, 550W Exhaust Fans, Mini Air Pump
Advantages Incorporates a high-precision ball-screw transmission system and ultra-strong steel welded frame structure, which is coupled with a medium-power laser generator. This model offers a large-format, high-speed and high-precision cutting result, and is especially suitable for acrylic, wood, MDF, plywood and other non-metallic materials.
CJG-160300 LD Specifications • Laser type: CO2 glass laser tube • Laser power: 80W, 130W • Cutting area: 1.6m*3m-width and length • Cutting(no-load) speed: 0-30000mm/min
Large-Formatfor for Large-Format Efficient Textile Efficient Textile Processing Processing
• Moving system: Servo system, safety alarm system, offline control • Power supply: AC220V+-5%, 50/60HZ • Format support: AI, BMP, PLT, DXF, DST etc • Standard Accessories: Constant -Temperature Water Chiller, Upper Exhaust Fan, Mini Air Pump • Optional Accessories: Shape or Roller-Wheel Feeder, Copy System (if equipped with feeder to the machine)
Advantages Incorporates a moving conveyor working table, optionally equipped with an autofeeder to ensure continuous working. Provided with intelligent layout software, this machine offers fast processing, material saving features, and ability to easily typeset and modify the design. It has high-efficiency and high-quality cutting for different kinds of textiles, non-woven materials, industrial materials, cardboard, and precise leather cutting.
www.plasquip.com.au plasquip.com.au
High Precision Metal Laser Cutting & Engraving Machines
ZJ(3D)-9045 TB Specifications • Laser type: RF metal CO2 laser tube • Laser power: 100W, 150W, 275W, 500W for choice • Working size: 400mm*900mm • Galvanometer engraving or cutting area at one time: 150mm x 150mm to 400mm x 400mm • Working speed: 0--5000mm/s • Repeating location: +- 0.01mm • Exhaust system: 550W top exhaust fans, 1100W bottom exhaust fans • Laser power adjustment: Following laser power adjustment • Cooling system: Water chiller • Moving system: 3-Dimension Dynamic offline moving control system, Z axis up and down size, red-crossing positioning system, servo motor • Format supporting: AI, BMP, PLT, DXF, DST etc. • Working voltage: 220V, 50HZ
Features • This model adopts the 3D dynamic Galvanometer controlling system, with the Z axis able to automatically adjust up and down for engraving or cutting different pattern sizes ranging from 150mm x 150mm to 400mm x 400mm at one time. • It can be fitted with a CO2 RF Metal Laser Tube with 100W, 150W, and 500W – the higher the laser power the faster the cutting speed. • The Galvo Head is MADE IN GERMANY and ensures the optimum high-precision and cutting speeds. • The biggest working size for the Galvo Head cutting and engraving at one time is 400mm x 400mm, and in conjunction with the working table moving automatically from left to right, it can process up to 900mm x 400mm. In this way, it is convenient for engraving and cutting a big pattern at the one time with good quality which avoids the chance of error by engraving or cutting a big pattern several times. On the other hand, when you are processing small pieces, you can prepare them first on the table while working to improve the production efficiency. • The Servo System ensures the whole machine is working with very high stability and continuing to work smoothly after a long working life. • Accessories: Constant-Temperature Water Chiller, 550W Exhaust Fan, Red Dot Light Location System
Small Format METAL Cutting and Engraving
FREEPHONE 1300 722 868
YAG Laser Cutting Machines GJMSJG-130250 DT
Our MOST Popular And Cost Effective Metal Laser Cutting Machine
Specifications • Laser Power: 650W / 800W • Moving system: Servo driver ball screw • Working area: 1300 x 2500 (mm) • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
Advantages Incorporates a high-precision ball-screw transmission system and ultra-strong steel welded frame structure, which is coupled with a medium-power laser generator. This model offers a large-format, high-speed and high-precision cutting result, and is especially suitable for acrylic, wood, MDF, plywood and other non-metallic materials.
GJMSJG-150300 DT BIG Brother to the GJMSJG-130250DT
Specifications • Laser Power: 650W / 800W • Moving system: Servo driver ball screw • Working area: 1500 x 3000 (mm) • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
GJMSJG-13090 DT Specifications • Laser power: 500W/650W • Moving system: Servo driver ball screw • Working area: 1300 x 900 (mm) • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
Features FULLY Enclosed Metal Cutting System
• YAG Lamp Pump solid laser generator • Low investment • YASKAWA servo system • High precision ball screw transmitting system • Professional water chiller for laser system • Offline control system • Auto following focus system • Nesting software
www.plasquip.com.au plasquip.com.au
Fibre Laser Cutting Machines XJG-150300 DT Specifications • • • • • • • • • • • • • • •
Laser types: Fiber laser generator Cutting area: 1500 × 3000 (mm) Control system: PMAC full-closed loop servo control Y axis driving mode: Double ball screw driving Cooling system: High precision constant temperature water chiller Laser head standard/optional: Golden Laser Power supply standard/optional: 380V/220V Laser power standard/optional: 1000/300-2000W Working table structure standard/optional: Fixed working table Positioning accuracy: 0.05mm Idle and processing speed: 0-700mm/s for idle or 0-350mm/s for processing Protection system: standard/optional: Open/with cover Format supported: PLT, DXF, AI, etc Total power: 7.5/6-20kW Other Standard Accessories: Metal Nesting Software, dual-pressure gas route of 3 different gas sources, dynamic focus and remote controller etc.
High Speed and Efficient Metal Cutting
High Speed and Efficient Metal Cutting
Advantages Fibre laser cutting is among the largest application for lasers in material processing. Fibre Laser Technology allows for small-beam diameter, thereby decreasing the kerf width, decreasing heat penetration, and increasing throughput. Also, the power consumption of Fibre Laser is very low, with virtually no ongoing maintenance, and ideal for mass-production. These machines will meet high demands for cutting quality and cutting speed. Compared with YAG or CO2 Laser, Fibre Laser offers the advantages below: a) Low-maintenance as it is transmitted by Fibre cable, with no need of reflecting mirrors, and no need to adjust the light route. b) Low power consumption: both energy saving and very environmentally friendly, the Fibre Lasers have the lowest power consumption and offer the highest photoelectric conversion factors. The power consumption is only 20% - 30% of other laser cutting systems. c) Low gas consumption: no need for mixing the gases for cutting, and highpressure air can also cut steel.
XJG-150300 JH Specifications • • • • • • • • • • • • • • •
Laser Type: Fiber laser generator Cutting Area: 1500mm×3000mm Laser Power (standard/optional): 500W ~ 2000W Working Table Structure: Pallet changer working table Control System: PMAC full-closed loop servo control Y axis driving mode: Double gear rack driving Cooling System: Dual temperature dual control chiller Laser Head : Precitec / Golden Laser / Laser Mech Power Supply (standard / optional): 380V / 220V Floor Space: 8.5m×4.2m Positioning Accuracy: 0.05mm Protection System: Enclosure protection Format Supported: PLT, DXF, AI, etc. Total Power: 16KW / 7KW ~ 20KW Other Standard Accessories: Metal Nesting Software, dual-pressure gas route of 3 different gas sources, dynamic focus etc.
FREEPHONE 1300 722 868
FULLY Enclosed EnclosedMetal Metal FULLY Cutting System WITH Cutting WITH Shuttle Table Shuttle Table
100 Wharf Road Melrose Park NSW 2114 FREEPHONE 1300 722 868 EMAIL [email protected]
plasquip.com.au
www.plasquip.com.au
Powered by Golden Laser
www.plasquip.com.au plasquip.com.au
Whatever the volume or scope of your manufacturing operations, talk to PLASQUIP SALES today about a Laser Cutting & Engraving Machine solution that will not only meet but also exceed your requirements. Tell us what you are looking for, and we can provide personal consultation through our vast experience with this technology to provide a comprehensive and tailored solution to your specific applications. PLASQUIP entered the world of Laser Cutting & Engraving Machines through it’s long association with the Plastics, Display, and Signage Industries here in Australia and New Zealand with the CO2 Laser Systems – this has since progressed rapidly so that we can now provide a total solutions package in YAG Laser and Fibre Laser Machines for a broad spectrum of different industries. As you browse through this brochure, you will see our range of standard Laser Cutting & Engraving Machines, but don’t think you need to limit yourself to this – we can provide bespoke solutions to your specific requirements including accessories such as Auto-Feed/Unload Systems and Roll-Feed Systems for Flexible Materials. To make it easier to identify the correct models for you, we have colour-coded a Quick Reference Guide as follows: GREEN Cutting Non-Metallic Materials RED Cutting Metallic Materials BLUE Engraving Non-Metallic Materials GOLD Engraving Metallic Materials When you have identified which Laser Cutting & Engraving Machines will process the materials in your application, then consider the following: • Do I want to be able to load a full sheet onto the machine, and do I have the room for a Flat-Bed Laser System? • Maybe a Fully Enclosed System would be best for me as it will occupy a smaller footprint and will be closed off from the surrounding work environment?
Australia-Wide Laser Technician Support PLASQUIP has a network of qualified Laser Technicians who can handle the initial Installation/Commissioning/Operator Training, and in most cases, the same technician will look after any ongoing warranty and servicing requirements in order to provide efficient personal service. As an integral part of your manufacturing processes, you need local support, and we can provide it, backed up by networking between our Laser Technicians, excellent FactoryBased Technical Support, and a large local Spare Parts inventory. We look forward to providing consultation to provide the best Laser Cutting & Engraving Machine solution for your specific requirements.
All products featured in this brochure are subject to PLASQUIP Terms & Conditions (copy available on request). E & O.E.
Laser Cutting & Engraving Machines JG-7040 Specifications • Laser power: 50W CO2 glass laser tube • Working area: 700 x 400 (mm)
• Working platform: Up and down working table • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
Advantages • Compact design, easy to move and ideal for smaller workshops. Also suitable for demo room or exhibitions. • Save space and money. • Very precise engraving effects at high speed.
The compact Laser Engraving Machine solution
• Closed design, professional exhaust system, ensuring safety and clean processing.
JG-10060 Specifications
Compact CompactDesign Designfor for Efficient EfficientCutting Cutting&& Engraving Engraving
• Laser safety: Class I laser safety • Laser type: Sealed CO2 Glass Laser Tube • Laser power: 65W / 80W • Working area: 1000*600 (mm) • Working platform: honeycomb working table or strip working table • Cutting (no-load) speed: 0—24000mm/min • Moving system: Offline stepping moving system, synchro belt moving • Repeating location: ±0.1mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc • Connection port: USB port, Internet port, U Disk. • Standard Accessories: Chiller Unit, Mini Air Pump, 550W Exhaust Fan
Features Includes a ‘pass-through’ feature for processing larger sheets then the Working Area. It is suitable for Engraving and Cutting on all kinds on non-metal material for a broad scope of applications, offering excellent quality with a low-budget investment.
FREEPHONE 1300 722 868
www.plasquip.com.au plasquip.com.au
Laser Cutting & Engraving Machines MJG-13090 SG Specifications • Laser type: Hermetic detached Co2 laser tube • Laser power: 80W/130W • Cutting area: 1300 X 900mm • Cutting speed: 0-24000mm/min • Engraving speed: 0-30000mm/min • Working platform: Knife strip working table with auto up and down function • Repeating location: ±0.1mm • Moving system: offline moving control system
Latest LatestRelease Release Cutting Cutting & Machine & Engraving Engraving Machine
• Laser power adjustment: following laser power adjustment • Power supply: 220V±5% 50/60HZ • Format support: AI, BMP, PLT, DXF, DST and etc • Standard Accessories: Chiller Unit, Mini Air Pump, 550W Exhaust Fan • Optional Accessories: 80W/130W glass laser tube
Features • The ‘Mars’ Series Laser Machines incorporate streamline mass-production technology in the laser industry and offer an ergonomic appearance, excellent performance, and easy maintenance. • Precision engrave and cut non-metallic materials such as acrylic, double-colour badges, wood, and marble.
JG-13090 Specifications • Laser type: Sealed CO2 laser tube or CO2 RF metal laser tube • Laser power: 65W, 80W, 130W glass tube or 100W, 150W, 200W RF metal tube. • Working area: 1300 x 900 (mm) • Working platform: honeycomb working table or knife strip working table • Cutting speed: up to 24m/min depending onload • Moving system: Offline stepping moving system, synchro belt moving Laser power adjustment: 0-100% Auto following control • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc • Standard Accessories: Chiller Unit, Upper & Lower Exhaust Fans, Mini Air Pump
Our most Popular Industrial Workhorse for Acrylic
• Optional Accessories: constant temperature water chiller
Features • Girder construction, stable working table ensuring high precision laser cutting. Strong flexibility, suitable for all kinds of laser cutting technical requirements.
www.plasquip.com.au plasquip.com.au
Laser Cutting & Engraving Machines JGSH-13090 SG Specifications • Laser type: Hermetic and detached CO2 laser tube. • Laser power: 50W and 80W or 130W, please select it if you need it for cutting and engraving separately, 80W or 130W laser tube for cutting, 50W laser tube for engraving, the two laser heads working can freely switch to the other, the engraving and cutting systems can automatically make the two laser heads working according to the pattern, the double system insures high-speed and precise engraving, the cutting is powerful, steady, smooth. • Working size: 1300x900mm. • Working table: Honeycomb or strip working table be selected • Cutting speed: 0-24000mm/min. • Automatic up and down working table, suitable for process different thickness materials cutting and engraving, the automatic up and down distance: 150mm. • Moving system: Offline stepping motor system, multi machine joint-online operate. • Power supply: AC220V/50HZ.
Dual-Power for Dual-Power System System for the theBEST BESTof ofboth bothWorlds Worlds
• Format support: AI, BMP, PLT, DXF, DST, etc • Standard Accessories: Chiller Unit & Protection System, 180W Exhaust Fan, Mini Air Pump
PJG-13090 SG Specifications • Laser power: 80W CO2 Glass laser tube, 65W/130W OPTIONAL • Laser type: DC Glass laser tube • Motor type: Step motor motion system • Working area: 1300mm x 900mm • Working platform: Aluminium strip knife table, OPTIONAL • Honeycomb table • Positioning accuracy: +/- 0.1mm • Power supply: AC 220V +/- 5% / 50HZ • Software formats supported: AI, BMP, PLT, DXF, DST etc.
Advantages • Extremely operator-friendly with the processing area and core area strictly separated, ensuring independent processing and stable performance of the core components. • Integrated aluminium pipe support and guide rail structure, offering a high stability operation which in turn produces better performance and cutting quality. • Moulded exterior panels and modular assembly for a very streamline appearance. • User-friendly electrical height-adjustable table for automatic positioning for different thickness materials, creating the best focus height and processing effects.
FREEPHONE 1300 722 868
NEW RELEASE Cutting and Engraving Machine
Laser Cutting & Engraving Machines JGSD-13090 DT Specifications • Laser type: Sealed CO2 Laser Tube • Laser power: 150W glass tube • Working area: 1300*900 (mm) • Working platform: knife strip working table • Cutting (no-load) speed: 0-24000mm/min • Moving system: Offline servo motor moving system, belt transmission • Laser power adjustment: 0-100% Auto following control • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc • Connection port: USB port, Internet port, U Disk. • Cooling system: Constant temperature water chiller • Standard Accessories: 550W Lower Exhaust Fans, Mini Air Pump
Features This Laser Cutting Machine is equipped with a 150W CO2 Glass Laser Tube and incorporates an Auto-Focus Cutting Head which allows it to cut thin stainless steel. The Cutting Head can automatically select the best focal length, ensuring the best focusing effects and cutting results for the uneven metal surface, yet still offering an excellent cutting performance for other non-metallic materials such as acrylic, wood etc.
Cut Acrylic AND Stainless Steel on the ONE Machine
www.plasquip.com.au plasquip.com.au
Large-Format Laser Cutting Machines
Australia’s best value - for Australia’s best value-forlarge - format moneymoney large-format Laser Laser Machinesolution solution Machine
CJG-130250 DT
Our most popular FLAT-BED CO2 Laser System
Specifications • Laser power: 130W CO2 RECI R6 glass laser tube • Motor type: Servo motor
• Working area: 2500 x 1300 (mm) • Working platform: Zinc-iron honeycomb table or strip panel working table • Cutting speed ~20 metre / minute depending on load • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
Features • The large format laser cutting bed suits outdoor signage, with its large working area and high-speed laser optics. • High cutting speeds are achieved with minimal laser optic loss. The machines demonstrate running stability and endurance. The open design is especially suited to large-format use. • The laser is professionally chilled to a constant temperature, enabling predictable usage regardless of ambient temperatures. • Strip panel working table reduces reflection when cutting transparent materials.
CJG-200300 DT
Applications:
Specifications
Large acrylic sheet, PMMA, LED board, MDF, balsa wood, laminated board, HPL, plastic, floorboard, dashboard, signage, banners, flags, furniture
BIG Brother to the CJG-130250DT • Laser power: 130W CO2 RECI R6 glass laser tube • Motor type: Servo motor
• Working area: 3000 x 2000 (mm) • Working platform: Strip panel working table • Cutting speed ~20 metre / minute depending on load • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
Our most popular FLAT-BED CO2 Laser System
FREEPHONE 1300 722 868
Large-Format Laser Cutting Machines JMSCJG-130250 Specifications • Working area: 1300mm x 2500mm • Working table: Strip working table • Laser type: CO2 RF metal laser tube or Chinese glass laser tube • Laser power: 100W, 150W, 275W, 500W metal tube
High Speed and High Capacity Flat-Bed System
• Cutting (no-load) speed: 0-24000mm/min • Repeating location: ±0.1mm • Cooling mode: Constant temperature water cooling chiller • Controlling system: 5 inches LCD display digital system • Moving system: Servo motor moving system, high precision ball screw moving technology • Focus lens: The lens and mirror are all from American company II-VI • Air blow: normal air blow with air pressure can be adjust from the cutting head • Top Exhaust: attached to the lens mount • Bottom Exhaust: following exhaust system The bottom exhaust is fixed under the laser head and move together with the laser head • Electricity Requirement: AC 220V or 380V, 50HZ • Format support: AI, PLT, DXF, etc • Standard Accessories: Constant-Temperature Water Chiller, Travelling Top & Bottom Exhaust System, Medium Pressing Exhaust Device, 550W Exhaust Fans, Mini Air Pump
Advantages Incorporates a high-precision ball-screw transmission system and ultra-strong steel welded frame structure, which is coupled with a medium-power laser generator. This model offers a large-format, high-speed and high-precision cutting result, and is especially suitable for acrylic, wood, MDF, plywood and other non-metallic materials.
CJG-160300 LD Specifications • Laser type: CO2 glass laser tube • Laser power: 80W, 130W • Cutting area: 1.6m*3m-width and length • Cutting(no-load) speed: 0-30000mm/min
Large-Formatfor for Large-Format Efficient Textile Efficient Textile Processing Processing
• Moving system: Servo system, safety alarm system, offline control • Power supply: AC220V+-5%, 50/60HZ • Format support: AI, BMP, PLT, DXF, DST etc • Standard Accessories: Constant -Temperature Water Chiller, Upper Exhaust Fan, Mini Air Pump • Optional Accessories: Shape or Roller-Wheel Feeder, Copy System (if equipped with feeder to the machine)
Advantages Incorporates a moving conveyor working table, optionally equipped with an autofeeder to ensure continuous working. Provided with intelligent layout software, this machine offers fast processing, material saving features, and ability to easily typeset and modify the design. It has high-efficiency and high-quality cutting for different kinds of textiles, non-woven materials, industrial materials, cardboard, and precise leather cutting.
www.plasquip.com.au plasquip.com.au
High Precision Metal Laser Cutting & Engraving Machines
ZJ(3D)-9045 TB Specifications • Laser type: RF metal CO2 laser tube • Laser power: 100W, 150W, 275W, 500W for choice • Working size: 400mm*900mm • Galvanometer engraving or cutting area at one time: 150mm x 150mm to 400mm x 400mm • Working speed: 0--5000mm/s • Repeating location: +- 0.01mm • Exhaust system: 550W top exhaust fans, 1100W bottom exhaust fans • Laser power adjustment: Following laser power adjustment • Cooling system: Water chiller • Moving system: 3-Dimension Dynamic offline moving control system, Z axis up and down size, red-crossing positioning system, servo motor • Format supporting: AI, BMP, PLT, DXF, DST etc. • Working voltage: 220V, 50HZ
Features • This model adopts the 3D dynamic Galvanometer controlling system, with the Z axis able to automatically adjust up and down for engraving or cutting different pattern sizes ranging from 150mm x 150mm to 400mm x 400mm at one time. • It can be fitted with a CO2 RF Metal Laser Tube with 100W, 150W, and 500W – the higher the laser power the faster the cutting speed. • The Galvo Head is MADE IN GERMANY and ensures the optimum high-precision and cutting speeds. • The biggest working size for the Galvo Head cutting and engraving at one time is 400mm x 400mm, and in conjunction with the working table moving automatically from left to right, it can process up to 900mm x 400mm. In this way, it is convenient for engraving and cutting a big pattern at the one time with good quality which avoids the chance of error by engraving or cutting a big pattern several times. On the other hand, when you are processing small pieces, you can prepare them first on the table while working to improve the production efficiency. • The Servo System ensures the whole machine is working with very high stability and continuing to work smoothly after a long working life. • Accessories: Constant-Temperature Water Chiller, 550W Exhaust Fan, Red Dot Light Location System
Small Format METAL Cutting and Engraving
FREEPHONE 1300 722 868
YAG Laser Cutting Machines GJMSJG-130250 DT
Our MOST Popular And Cost Effective Metal Laser Cutting Machine
Specifications • Laser Power: 650W / 800W • Moving system: Servo driver ball screw • Working area: 1300 x 2500 (mm) • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
Advantages Incorporates a high-precision ball-screw transmission system and ultra-strong steel welded frame structure, which is coupled with a medium-power laser generator. This model offers a large-format, high-speed and high-precision cutting result, and is especially suitable for acrylic, wood, MDF, plywood and other non-metallic materials.
GJMSJG-150300 DT BIG Brother to the GJMSJG-130250DT
Specifications • Laser Power: 650W / 800W • Moving system: Servo driver ball screw • Working area: 1500 x 3000 (mm) • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
GJMSJG-13090 DT Specifications • Laser power: 500W/650W • Moving system: Servo driver ball screw • Working area: 1300 x 900 (mm) • Positioning accuracy: ± 0.1 mm • Power supply: AC 220V ±5% / 50HZ • Software formats support: AI, BMP, PLT, DXF, DST, etc
Features FULLY Enclosed Metal Cutting System
• YAG Lamp Pump solid laser generator • Low investment • YASKAWA servo system • High precision ball screw transmitting system • Professional water chiller for laser system • Offline control system • Auto following focus system • Nesting software
www.plasquip.com.au plasquip.com.au
Fibre Laser Cutting Machines XJG-150300 DT Specifications • • • • • • • • • • • • • • •
Laser types: Fiber laser generator Cutting area: 1500 × 3000 (mm) Control system: PMAC full-closed loop servo control Y axis driving mode: Double ball screw driving Cooling system: High precision constant temperature water chiller Laser head standard/optional: Golden Laser Power supply standard/optional: 380V/220V Laser power standard/optional: 1000/300-2000W Working table structure standard/optional: Fixed working table Positioning accuracy: 0.05mm Idle and processing speed: 0-700mm/s for idle or 0-350mm/s for processing Protection system: standard/optional: Open/with cover Format supported: PLT, DXF, AI, etc Total power: 7.5/6-20kW Other Standard Accessories: Metal Nesting Software, dual-pressure gas route of 3 different gas sources, dynamic focus and remote controller etc.
High Speed and Efficient Metal Cutting
High Speed and Efficient Metal Cutting
Advantages Fibre laser cutting is among the largest application for lasers in material processing. Fibre Laser Technology allows for small-beam diameter, thereby decreasing the kerf width, decreasing heat penetration, and increasing throughput. Also, the power consumption of Fibre Laser is very low, with virtually no ongoing maintenance, and ideal for mass-production. These machines will meet high demands for cutting quality and cutting speed. Compared with YAG or CO2 Laser, Fibre Laser offers the advantages below: a) Low-maintenance as it is transmitted by Fibre cable, with no need of reflecting mirrors, and no need to adjust the light route. b) Low power consumption: both energy saving and very environmentally friendly, the Fibre Lasers have the lowest power consumption and offer the highest photoelectric conversion factors. The power consumption is only 20% - 30% of other laser cutting systems. c) Low gas consumption: no need for mixing the gases for cutting, and highpressure air can also cut steel.
XJG-150300 JH Specifications • • • • • • • • • • • • • • •
Laser Type: Fiber laser generator Cutting Area: 1500mm×3000mm Laser Power (standard/optional): 500W ~ 2000W Working Table Structure: Pallet changer working table Control System: PMAC full-closed loop servo control Y axis driving mode: Double gear rack driving Cooling System: Dual temperature dual control chiller Laser Head : Precitec / Golden Laser / Laser Mech Power Supply (standard / optional): 380V / 220V Floor Space: 8.5m×4.2m Positioning Accuracy: 0.05mm Protection System: Enclosure protection Format Supported: PLT, DXF, AI, etc. Total Power: 16KW / 7KW ~ 20KW Other Standard Accessories: Metal Nesting Software, dual-pressure gas route of 3 different gas sources, dynamic focus etc.
FREEPHONE 1300 722 868
FULLY Enclosed EnclosedMetal Metal FULLY Cutting System WITH Cutting WITH Shuttle Table Shuttle Table
100 Wharf Road Melrose Park NSW 2114 FREEPHONE 1300 722 868 EMAIL [email protected]
plasquip.com.au
www.plasquip.com.au
