AGO2GO Install instructions for Mac 10.9 to 10.11
Installing AGO2GO on a Mac 10.9 to 10.11 This has been confirmed to work with Mac OS X 10.11 "El Capitan" We will be installing 2 applications and adding some settings that will streamline the login process. The 3 applications are as follows; 1. Citrix Receiver 12.0.0 (I’ll use the abbreviation "CR" in the instructions) 2. NetScaler Gateway 3.1.4 (I’ll use the abbreviation "NSG" in the instructions)
Along with these instructions on ACE, there is a file named "AGO2GO Mac Apps.zip" that you can transfer to your Mac's Desktop. When the zip file is on the Mac, double-click the zip file and it will create a folder called "AGO2GO Mac Apps" containing the 3 application installers. The installers end with the suffix ".dmg" in this folder. We will be installing the apps in the order they are listed above.
Lantz Newberry revised 11/02/2015
INSTALLING CITRIX RECEIVER Double-click the "CitrixReceiver12.0.dmg" file and it will create a mounted disk on the Desktop containing the installer file.
Double-click the "Install Citrix Receiver.pkg" file.
Lantz Newberry revised 08/20/2015
Click Continue.
Click Continue again.
Click Agree and Continue.
Lantz Newberry revised 08/20/2015
Click Install.
Use your Mac's admin Username and Password if asked.
Click Continue.
Lantz Newberry revised 08/20/2015
Click Close when the install is finished.
Lantz Newberry revised 08/20/2015
INSTALLING NETSCALER GATEWAY Double-click the "Citrix_Access_Gateway.dmg" file and it will create a mounted disk on the Desktop containing the installer file.
Double-click the "Install Citrix Access Gateway Plug-in.pkg" file.
Lantz Newberry revised 08/20/2015
Click Continue.
Click Agree and Continue.
Click Install.
Lantz Newberry revised 08/20/2015
Use your Mac's admin Username and Password if asked.
Click Close when the install is finished.
Lantz Newberry revised 08/20/2015
SETUP THE APPLICATIONS Setup Citrix Receiver Open the Finder and go to the Applications folder and double-click the "CR" app.
Click on the “CR” name in the menu and choose Preferences.
Lantz Newberry revised 08/20/2015
Under the General tab CHECK the box "Show Receiver in menu bar" and click the red button to close the window.
Click on the “CR” name in the menu and choose Quit “CR.”
Go to the menu bar, click on the “CR” icon and choose Quit.
Lantz Newberry revised 08/20/2015
Setup NetScaler Gateway Open the Finder and go to the Applications > Citrix folder and double-click the "NSG" app.
Click on the "Connection:" drop down menu to open the “NSG” Preferences window.
Lantz Newberry revised 08/20/2015
Under the Connections tab add the following settings; •
Connection: AGO2GO
•
Server address: atg.cag.wa.gov
Click the General tab and CHECK the box "Show “NSG” status in the menu bar" and click the red button to close the window.
Lantz Newberry revised 08/20/2015
To login to AGO network make sure the Connection is set to AGO2GO in the drop down menu and click Connect.
In a few moments is will ask for your “AGO2GO login credentials,” enter them and click Log On. Username: Your AGO2GO username provided by ISD should look something like, ATG****100 Password: Use one of these two options depending on what you have; •
If using a keyfob, the password is your PIN plus the FOB numbers displayed (no space).
•
If using a mobile smartphone token (the RSA application on the phone), the password is just the numbers displayed (no space).
Lantz Newberry revised 08/20/2015
IMPORTANT: At this window use your “AGO network” username and password to logon (NOT your AGO2GO credentials that were used earlier). These are the credentials you use to logon to your PC when you come to work.
These are the AGO2GO applications.
Use the "Log Off" button to logout before quitting the browser.
Lantz Newberry revised 08/20/2015
NETSCALER GATEWAY LOGIN ITEM To setup the NetScaler Gateway application to open automatically when logging on to your computer. Go to the Apple icon in the menu and choose System Preferences.
Choose "Users & Groups"
Lantz Newberry revised 08/20/2015
Choose the "Login Items" tab and click the "+" button to add an application.
Navigate to the Applications > Citrix folder, select "NSG" and click the Add button.
When you login to your Mac the NSG window should open automatically. If it does not, it's because of a conflict between the CR and NSG apps. You'll need to quit the CR app first, then open the NSG app. To close the CR app, use the CR icon in the menu bar and choose Quit. Make sure you're quitting CR and not NSG. After this initial setup of AGO2GO you will NOT be using Citrix Receiver at all, the only app you will be using is NetScaler Gateway, everything else works in the background.
Lantz Newberry revised 08/20/2015
Tip: For quick access to an app you can drag it from the Applications folder into your DOCK and it will create an alias of the apps. This does not move the app, it should still be in your Applications folder, this just creates a shortcut to open it.
Lantz Newberry revised 08/20/2015
Along with these instructions on ACE, there is a file named "AGO2GO Mac Apps.zip" that you can transfer to your Mac's Desktop. When the zip file is on the Mac, double-click the zip file and it will create a folder called "AGO2GO Mac Apps" containing the 3 application installers. The installers end with the suffix ".dmg" in this folder. We will be installing the apps in the order they are listed above.
Lantz Newberry revised 11/02/2015
INSTALLING CITRIX RECEIVER Double-click the "CitrixReceiver12.0.dmg" file and it will create a mounted disk on the Desktop containing the installer file.
Double-click the "Install Citrix Receiver.pkg" file.
Lantz Newberry revised 08/20/2015
Click Continue.
Click Continue again.
Click Agree and Continue.
Lantz Newberry revised 08/20/2015
Click Install.
Use your Mac's admin Username and Password if asked.
Click Continue.
Lantz Newberry revised 08/20/2015
Click Close when the install is finished.
Lantz Newberry revised 08/20/2015
INSTALLING NETSCALER GATEWAY Double-click the "Citrix_Access_Gateway.dmg" file and it will create a mounted disk on the Desktop containing the installer file.
Double-click the "Install Citrix Access Gateway Plug-in.pkg" file.
Lantz Newberry revised 08/20/2015
Click Continue.
Click Agree and Continue.
Click Install.
Lantz Newberry revised 08/20/2015
Use your Mac's admin Username and Password if asked.
Click Close when the install is finished.
Lantz Newberry revised 08/20/2015
SETUP THE APPLICATIONS Setup Citrix Receiver Open the Finder and go to the Applications folder and double-click the "CR" app.
Click on the “CR” name in the menu and choose Preferences.
Lantz Newberry revised 08/20/2015
Under the General tab CHECK the box "Show Receiver in menu bar" and click the red button to close the window.
Click on the “CR” name in the menu and choose Quit “CR.”
Go to the menu bar, click on the “CR” icon and choose Quit.
Lantz Newberry revised 08/20/2015
Setup NetScaler Gateway Open the Finder and go to the Applications > Citrix folder and double-click the "NSG" app.
Click on the "Connection:" drop down menu to open the “NSG” Preferences window.
Lantz Newberry revised 08/20/2015
Under the Connections tab add the following settings; •
Connection: AGO2GO
•
Server address: atg.cag.wa.gov
Click the General tab and CHECK the box "Show “NSG” status in the menu bar" and click the red button to close the window.
Lantz Newberry revised 08/20/2015
To login to AGO network make sure the Connection is set to AGO2GO in the drop down menu and click Connect.
In a few moments is will ask for your “AGO2GO login credentials,” enter them and click Log On. Username: Your AGO2GO username provided by ISD should look something like, ATG****100 Password: Use one of these two options depending on what you have; •
If using a keyfob, the password is your PIN plus the FOB numbers displayed (no space).
•
If using a mobile smartphone token (the RSA application on the phone), the password is just the numbers displayed (no space).
Lantz Newberry revised 08/20/2015
IMPORTANT: At this window use your “AGO network” username and password to logon (NOT your AGO2GO credentials that were used earlier). These are the credentials you use to logon to your PC when you come to work.
These are the AGO2GO applications.
Use the "Log Off" button to logout before quitting the browser.
Lantz Newberry revised 08/20/2015
NETSCALER GATEWAY LOGIN ITEM To setup the NetScaler Gateway application to open automatically when logging on to your computer. Go to the Apple icon in the menu and choose System Preferences.
Choose "Users & Groups"
Lantz Newberry revised 08/20/2015
Choose the "Login Items" tab and click the "+" button to add an application.
Navigate to the Applications > Citrix folder, select "NSG" and click the Add button.
When you login to your Mac the NSG window should open automatically. If it does not, it's because of a conflict between the CR and NSG apps. You'll need to quit the CR app first, then open the NSG app. To close the CR app, use the CR icon in the menu bar and choose Quit. Make sure you're quitting CR and not NSG. After this initial setup of AGO2GO you will NOT be using Citrix Receiver at all, the only app you will be using is NetScaler Gateway, everything else works in the background.
Lantz Newberry revised 08/20/2015
Tip: For quick access to an app you can drag it from the Applications folder into your DOCK and it will create an alias of the apps. This does not move the app, it should still be in your Applications folder, this just creates a shortcut to open it.
Lantz Newberry revised 08/20/2015
