“HAVE IT YOUR WAY” Embroidered Bag Supply List

“HAVE IT YOUR WAY” Embroidered Bag Supply List Design to be purchased at Richland Sewing Center--sale price for class “Have It Your Way” 2 part class (Design by PJ--distributed by Anita Goodesign) Pat Sims- September 7, 2017 9:30 AM part 1, September 14, 2017 9:30 AM Part 2 September 19, 2017 at 6:00 PM part 1, September 26, 2017 part 2 Please have your fabric purchased and cut out before you come to class, it will save you time because it will take both classes to get this bag done and put together. I have enclosed a list of the fabric cuts to the correct size, please cut and label for left panel, right panel, bottom, small zipper compartment, big zipper compartment and inner pocket. I bought ¼ yard of 4 different fabrics, not really understanding exactly where I wanted to use them. The front green zippered pocket, I could have used a fat quarter.* -2 nylon zippers, one at least 8 inches for front zippered pocket and one 13 inches for the inner zipper pocket. (I used the same size zippers which I purchased at Richland Sewing Center--they are 14” but easy to cut.) -7 pieces of no-show mesh to fit the size of your hoop. The pattern calls for wash away stabilizer, such as Floriani Wet ‘n’ Gone. I didn’t use this because I couldn’t see where it was used in the design, so I used the no show mesh.* -I piece of fusible web, such as Steam a Seam or Heat & Bond, measuring 7 ¼ x 4 ¼”* -2 pieces of lightweight cutaway stabilizer to fit your hoop.* -1 yard of dense fleece iron-on such as Pellon Thermolan Plus or you can use Battilizer -Please bring your embroidery machine, embroidery unit, your hoop to fit the size stated in instructions, 6 x 10, embroidery foot, embroidery thread to go with your fabric, bobbin to match your upper thread, scissors, painters tape, USB stick, and any sewing items that you use in your sewing room. *These items can be purchased at Richland Sewing Center