Alfa Laval PHE Oil Cooling series
Alfa Laval PHE Oil Cooling series Hydraulic Oil Cooling Applications General information Alfa Laval´s PHE (Plate Heat Exchanger) Oil Cooler series is a range of gasketed plate heat exchangers suitable for most hydraulic systems. The high efficiency oil coolers have capacities of up to 30 MW (40000 HP). They handle pressures up to 25 bar (360 psi) and a maximum temperature of 180°C (350°F). Alfa Laval PHE Oil Coolers are suitable in industrial, marine and offshore applications. With a wide variety of plate materials, there are always solutions for different duties and environments. Working principle The PHE Oil Cooler consists of a pack of corrugated metal plates with portholes (for the passage of two fluids - oil and cooling water) between which heat transfer takes place. Channels are formed between the plates and the corner ports are arranged so that oil and water flow through alternate channels. The heat is transferred through the plate between the channels, and complete counter current flow is created for the highest possible efficiency. The corrugation of the plates enables passage between the plates, supports each plate against the adjacent one and enhances turbulence, which results in efficient heat transfer. The modular design of the PHE Oil Cooler series enables flexibility in the mechanical configuration. The connections can be adapted to individual needs as pipe threads or flanges. The position of the connections can be altered between the front and back. It is also easy to configure the unit for cooling more than one oil circuit in the same unit.
Competitive advantages of Alfa Laval PHE Oil Coolers: SIZE – High heat transfer efficiency combined with a compact design reduces size to a minimum. WATER CONSUMPTION – A true counter-current flow and high heat transfer efficiency minimize consumption of cooling water. FOULING – The well-distributed flow and high wall shear stress on the plate surface result in a self-cleaning effect to minimize fouling. FLEXIBILITY – A compact shape combined with a choice of connections and configurations makes it easier to design and build compact hydraulic systems that boost optimum performance. The plate technology also enables easy expansion of capacity if needed. AVAILABILITY – With Alfa Laval presence and manufacturing sites all over the world, there is always easy and cost-efficient availability of PHE Oil Coolers. CERTIFICATES – All Alfa Laval PHE Oil Coolers are available with a wide range of pressure vessel certificates such asoil & gas and marine certificates.
TL6
M3
Standard data Max. working temperature Max. working pressure Weight
180˚C (356˚F) 25 bar (362 psi) 200-850 kg (440-1875 lbs)
Standard data Max. working temperature Max. working pressure Weight
180°C (356°F) 16 bar (232 psi) 20-43 kg (44-95 lbs)
Pipe connections (2”/2 ½”)
Pipe connections (1 ¼”)
Straight threaded (50 mm) ISO-G 2”, NTP 2” Threaded inlet port (50 mm) ISO-G 2” Straight threaded (65 mm) ISO-G 2 ½”, NTP 2 ½”
Straight threaded ISO-R 1 ¼”, ISO-G 1 ¼” Threaded inlet port ISO-G 1 ¼” Straight threaded NTP 1 ¼”
Flange connections (DN50/DN65/2”/2 ½”)
Plates
DIN/GB/GOST PN16, ASME Class 150, DIN/GB/GOST PN40 and ASME Class 300
Alloy 316, Titanium
Plates
Nitrile, EPDM, HeatSeal F™, Viton®
Gaskets
Alloy 304, 316, 254 SMO, C-276, Titanium
Gaskets
Nitrile, EPDM, HeatSeal™, HNBR, Viton®G W
W 60 (2.4")
S1
S3
S2
H 357 (14.1")
1036 (40.8")
S4
h
h
H
140 (5.5")
625-1690 (24.6- 66.5")
382-632 (15-24.9")
Measurements mm (inch) H 1264-1308 (49.8-51.5”) 480 (18.9”)
TL6 M3
W 320-330 (12.6-13.0”) 180 (7.1”)
h 137-142 (5.4-5.6”) 61.5 (2.4”)
The measurements and number of tightening bolts vary depending on pressure rating.
Cooling capacity TL6B & M3
Pressure drop TL6B & M3
600 TL6B-150
500 400
671
36 TL6B-50
2 M3-25
536
TL6B-150
22
[bar]
402
M3-75
15
268
200 TL6B-50 100
M3-75
134
M3-50 M3-25
0 0
100
200
26
53
0 300
400
79 106 Oil flow [l/min] [gpm]
500
600
700
132
159
185
Conditions for the diagrams Oil temperature: 60°C (140°F), water: 20°C (68°F) Oil ISO VG 46 and oil-/water flow 2/1
29
M3-50
[psi]
300
TL6B-100
1,5
TL6B-100
[HP]
[kW]
2,5
805
0,5
7
0
0 0
100 26
200 53
300 400 79 106 Oil flow [l/min] [gpm]
500 132
600 159
700 185
TL10
M10
Standard data
Standard data
Max. working temperature Max. work. pressure Weight
160˚C (320˚F) 25 bar (362 psi) 515-2170 kg (1135-4785 lbs)
Max. working temperature Max. working pressure Weight
180°C (356°F) 25 bar (362 psi) 190-1040 kg (420-2290 lbs)
Flange connections (DN100/4”)
Flange connections (DN100/4”)
DIN/GB/GOST PN10 – ASME Class 150, JIS 10K – DIN/GB/GOST PN16 – DIN PN25
DIN/GB/GOST PN10 – ASME Class 150, JIS 10K – DIN PN16 – DIN PN25, ASME Class 300
Plates
Plates
Alloy 304, 316, Titanium
Alloy 304, 316, 254 SMO, C-276, Titanium
Gaskets
Gaskets
Nitrile, EPDM
Nitrile, EPDM, HNBR, EPDMF, Viton®, AL-EPDM
225 (8.9")
W
H 719 (28.3") h
h
H
1338 (52.7")
225 (8.9") or 231(9.1")
695-2400 (27-95")
1145-3245 (45-128”)
W
Measurements mm (inch) H 1885-1981 (74.2-78”) 981-1054 (38.6-42.7”)
TL10 M10
W 480-510 (19-20”) 470 (18.5”)
h 255-297 (10-11.6”) 131-215 (5.2-8.5”)
The measurements and number of tightening bolts vary depending on pressure rating.
Cooling capacity TL10P & M10B
Pressure drop TL10P & M10B
2000
36
2,5
2682 TL10P-150 2146
1600
TL10P-50
2
M10B-50
M10B-150 1609
[kW]
M10B-100
1073
M10B-50
400
536
0
0 0
500 132
1000 1500 264 396 Oil flow [l/min] [gpm]
2000 528
Conditions for the diagrams Oil temperature: 60°C (140°F), water: 20°C (68°F) Oil ISO VG 46 and oil-/water flow 2/1
2500 660
3000 793
29
M10B-150
1,5
22
1
15
[psi]
800
[HP]
TL10P-100 TL10P-50
M10B-100
TL10P-150
[bar]
1200
TL10P-100
0,5
7
0
0 0
500 132
1000 264
1500 2000 396 528 Oil flow [l/min] [gpm]
2500 660
3000 793
M15
M6
Standard data Max. working temperature Max. work. pressure Weight
Standard data Max. working temperature Max. working pressure Weight
180˚C (356˚F) 30 bar (435 psi) 550-4470 kg (1215-9855 lbs)
180°C (356°F) 25 bar (362 psi) 90-390 kg (200-860 lbs)
Flange connections (DN150/6”)
Pipe connections (2”)
DIN/GB/GOST PN10/PN16 – ASME Class 150, JIS 10K/16K – DIN 2501 PN16/PN25 – ASME Class 300
Straight threaded (50 mm) ISO-G 2”, NTP 2” Straight weld (50 mm) Threaded inlet port (50 mm) ISO-G 2”
Plates
Flange connections (DN50/2”)
Alloy 304, 316, C-276, 254 SMO, Titanium
DIN/GB/GOST PN10 – ASME Class 150 – DIN/GB/GOST PN16 – ASME Class 300, DIN PN25
Gaskets Nitrile, EPDM, EPDMF, HNBR, Viton® G, AL-EPDM
Plates Alloy 304, 316, Titanium
Gaskets Nitrile, EPDM, HeatSeal F™, HNBR, Viton® G
W 298 (11.7")
S1
S3
S2
H 640 (25.2")
S4
h
h
H
1294 (50.9")
W 140 (5.5")
1100 - 3700 43.3"-146")
523–1434 (20.6-56.5")
Measurements mm (inch) H 1815-2036 (71.5-80”) 920-940 (36.2-37”)
M15 M6
W 610-650 (24-25.5”) 320-330 (12.6-13”)
h 275-370 (10.8-14.5”) 140-150 (5.5-6”)
The measurements and number of tightening bolts vary depending on pressure rating.
Cooling capacity M15B & M6 2000 M15B-150
1600
2682
2,5
2146
2
Pressure drop M15B & M6 M15B-50 M6-50
1609
[kW] 800
1073
M6-150 M6-100
400
536
M15B-150
29
M6-100 M6-150
1,5
22
1
15
[psi]
[HP]
M15B-100 M15B-50
[bar]
1200
M15B-100
36
0,5
7
M6-50 0
0 0
500 132
1000 1500 264 396 Oil flow [l/min] [gpm]
2000 528
2500 660
0
0 0
500 132
1000 1500 264 396 Oil flow [l/min] [gpm]
2000 528
2500 660
Conditions for the diagrams Oil temperature: 60°C (140°F), water: 20°C (68°F) Oil ISO VG 46 and oil-/water flow 2/1
EFU00093EN 0906
How to contact Alfa Laval Up-to-date Alfa Laval contact details for all countries are always available on our website at www.alfalaval.com
Alfa Laval reserves the right to change specifications without prior notification.
Competitive advantages of Alfa Laval PHE Oil Coolers: SIZE – High heat transfer efficiency combined with a compact design reduces size to a minimum. WATER CONSUMPTION – A true counter-current flow and high heat transfer efficiency minimize consumption of cooling water. FOULING – The well-distributed flow and high wall shear stress on the plate surface result in a self-cleaning effect to minimize fouling. FLEXIBILITY – A compact shape combined with a choice of connections and configurations makes it easier to design and build compact hydraulic systems that boost optimum performance. The plate technology also enables easy expansion of capacity if needed. AVAILABILITY – With Alfa Laval presence and manufacturing sites all over the world, there is always easy and cost-efficient availability of PHE Oil Coolers. CERTIFICATES – All Alfa Laval PHE Oil Coolers are available with a wide range of pressure vessel certificates such asoil & gas and marine certificates.
TL6
M3
Standard data Max. working temperature Max. working pressure Weight
180˚C (356˚F) 25 bar (362 psi) 200-850 kg (440-1875 lbs)
Standard data Max. working temperature Max. working pressure Weight
180°C (356°F) 16 bar (232 psi) 20-43 kg (44-95 lbs)
Pipe connections (2”/2 ½”)
Pipe connections (1 ¼”)
Straight threaded (50 mm) ISO-G 2”, NTP 2” Threaded inlet port (50 mm) ISO-G 2” Straight threaded (65 mm) ISO-G 2 ½”, NTP 2 ½”
Straight threaded ISO-R 1 ¼”, ISO-G 1 ¼” Threaded inlet port ISO-G 1 ¼” Straight threaded NTP 1 ¼”
Flange connections (DN50/DN65/2”/2 ½”)
Plates
DIN/GB/GOST PN16, ASME Class 150, DIN/GB/GOST PN40 and ASME Class 300
Alloy 316, Titanium
Plates
Nitrile, EPDM, HeatSeal F™, Viton®
Gaskets
Alloy 304, 316, 254 SMO, C-276, Titanium
Gaskets
Nitrile, EPDM, HeatSeal™, HNBR, Viton®G W
W 60 (2.4")
S1
S3
S2
H 357 (14.1")
1036 (40.8")
S4
h
h
H
140 (5.5")
625-1690 (24.6- 66.5")
382-632 (15-24.9")
Measurements mm (inch) H 1264-1308 (49.8-51.5”) 480 (18.9”)
TL6 M3
W 320-330 (12.6-13.0”) 180 (7.1”)
h 137-142 (5.4-5.6”) 61.5 (2.4”)
The measurements and number of tightening bolts vary depending on pressure rating.
Cooling capacity TL6B & M3
Pressure drop TL6B & M3
600 TL6B-150
500 400
671
36 TL6B-50
2 M3-25
536
TL6B-150
22
[bar]
402
M3-75
15
268
200 TL6B-50 100
M3-75
134
M3-50 M3-25
0 0
100
200
26
53
0 300
400
79 106 Oil flow [l/min] [gpm]
500
600
700
132
159
185
Conditions for the diagrams Oil temperature: 60°C (140°F), water: 20°C (68°F) Oil ISO VG 46 and oil-/water flow 2/1
29
M3-50
[psi]
300
TL6B-100
1,5
TL6B-100
[HP]
[kW]
2,5
805
0,5
7
0
0 0
100 26
200 53
300 400 79 106 Oil flow [l/min] [gpm]
500 132
600 159
700 185
TL10
M10
Standard data
Standard data
Max. working temperature Max. work. pressure Weight
160˚C (320˚F) 25 bar (362 psi) 515-2170 kg (1135-4785 lbs)
Max. working temperature Max. working pressure Weight
180°C (356°F) 25 bar (362 psi) 190-1040 kg (420-2290 lbs)
Flange connections (DN100/4”)
Flange connections (DN100/4”)
DIN/GB/GOST PN10 – ASME Class 150, JIS 10K – DIN/GB/GOST PN16 – DIN PN25
DIN/GB/GOST PN10 – ASME Class 150, JIS 10K – DIN PN16 – DIN PN25, ASME Class 300
Plates
Plates
Alloy 304, 316, Titanium
Alloy 304, 316, 254 SMO, C-276, Titanium
Gaskets
Gaskets
Nitrile, EPDM
Nitrile, EPDM, HNBR, EPDMF, Viton®, AL-EPDM
225 (8.9")
W
H 719 (28.3") h
h
H
1338 (52.7")
225 (8.9") or 231(9.1")
695-2400 (27-95")
1145-3245 (45-128”)
W
Measurements mm (inch) H 1885-1981 (74.2-78”) 981-1054 (38.6-42.7”)
TL10 M10
W 480-510 (19-20”) 470 (18.5”)
h 255-297 (10-11.6”) 131-215 (5.2-8.5”)
The measurements and number of tightening bolts vary depending on pressure rating.
Cooling capacity TL10P & M10B
Pressure drop TL10P & M10B
2000
36
2,5
2682 TL10P-150 2146
1600
TL10P-50
2
M10B-50
M10B-150 1609
[kW]
M10B-100
1073
M10B-50
400
536
0
0 0
500 132
1000 1500 264 396 Oil flow [l/min] [gpm]
2000 528
Conditions for the diagrams Oil temperature: 60°C (140°F), water: 20°C (68°F) Oil ISO VG 46 and oil-/water flow 2/1
2500 660
3000 793
29
M10B-150
1,5
22
1
15
[psi]
800
[HP]
TL10P-100 TL10P-50
M10B-100
TL10P-150
[bar]
1200
TL10P-100
0,5
7
0
0 0
500 132
1000 264
1500 2000 396 528 Oil flow [l/min] [gpm]
2500 660
3000 793
M15
M6
Standard data Max. working temperature Max. work. pressure Weight
Standard data Max. working temperature Max. working pressure Weight
180˚C (356˚F) 30 bar (435 psi) 550-4470 kg (1215-9855 lbs)
180°C (356°F) 25 bar (362 psi) 90-390 kg (200-860 lbs)
Flange connections (DN150/6”)
Pipe connections (2”)
DIN/GB/GOST PN10/PN16 – ASME Class 150, JIS 10K/16K – DIN 2501 PN16/PN25 – ASME Class 300
Straight threaded (50 mm) ISO-G 2”, NTP 2” Straight weld (50 mm) Threaded inlet port (50 mm) ISO-G 2”
Plates
Flange connections (DN50/2”)
Alloy 304, 316, C-276, 254 SMO, Titanium
DIN/GB/GOST PN10 – ASME Class 150 – DIN/GB/GOST PN16 – ASME Class 300, DIN PN25
Gaskets Nitrile, EPDM, EPDMF, HNBR, Viton® G, AL-EPDM
Plates Alloy 304, 316, Titanium
Gaskets Nitrile, EPDM, HeatSeal F™, HNBR, Viton® G
W 298 (11.7")
S1
S3
S2
H 640 (25.2")
S4
h
h
H
1294 (50.9")
W 140 (5.5")
1100 - 3700 43.3"-146")
523–1434 (20.6-56.5")
Measurements mm (inch) H 1815-2036 (71.5-80”) 920-940 (36.2-37”)
M15 M6
W 610-650 (24-25.5”) 320-330 (12.6-13”)
h 275-370 (10.8-14.5”) 140-150 (5.5-6”)
The measurements and number of tightening bolts vary depending on pressure rating.
Cooling capacity M15B & M6 2000 M15B-150
1600
2682
2,5
2146
2
Pressure drop M15B & M6 M15B-50 M6-50
1609
[kW] 800
1073
M6-150 M6-100
400
536
M15B-150
29
M6-100 M6-150
1,5
22
1
15
[psi]
[HP]
M15B-100 M15B-50
[bar]
1200
M15B-100
36
0,5
7
M6-50 0
0 0
500 132
1000 1500 264 396 Oil flow [l/min] [gpm]
2000 528
2500 660
0
0 0
500 132
1000 1500 264 396 Oil flow [l/min] [gpm]
2000 528
2500 660
Conditions for the diagrams Oil temperature: 60°C (140°F), water: 20°C (68°F) Oil ISO VG 46 and oil-/water flow 2/1
EFU00093EN 0906
How to contact Alfa Laval Up-to-date Alfa Laval contact details for all countries are always available on our website at www.alfalaval.com
Alfa Laval reserves the right to change specifications without prior notification.
