anvil corvel coated products
ANVIL CORVEL COATED PRODUCTS Price Sheet COR-11.13 | Effective: November 4, 2013 | Cancels Price Sheet COR-5.13 of May 28, 2013
FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • UPC numbers numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s website at www.anvilintl.com. • Pricing is subject to change without notice. Go to Anvil’s website for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.
NORTHERN REGION CUSTOMER SERVICE CENTER
80 0 -301-2701
SOUTHERN REGION CUSTOMER SERVICE CENTER
www.anvilintl.com
80 0 - 451- 4 414
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
6. SHIPMENTS:
1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.
2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.
3. WARRANTY: Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
4. SELLER’S LIABILITY: Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.
5. RETURNS: Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.
All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.
7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.
8. PRICES AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated.
9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.
10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to selfinsure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.
11. MINIMUM INVOICE: Domestic: $100 plus transportation. International: $500 plus transportation.
12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments.
Additional Anvil products are available to be coated upon request. 2
www.anvilintl.com
Revised:
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
TABLE OF CONTENTS ANVIL CORVEL COATED PRODUCTS Malleable Iron, Cast Iron, and Steel Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Forged Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Steel Pipe Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Swage Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 JB Smith Oil Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Swage Nipples Tubing Nipples API Tubing Couplings Bull Plugs JB Smith Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 JB Smith Tapped Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Catawissa Hammer Unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Gruvlok . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revised:
www.anvilintl.com
3
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
MALLEABLE IRON, CAST IRON, AND STEEL FITTINGS STEEL XH API COUPLING
MI 90° ELBOW NOMINAL PIPE SIZE
PRICE
1⁄2
$19.61
3⁄4
NOMINAL PIPE SIZE
PRICE
BOX QTY
50
1
$35.62
25
$20.09
35
2
$62.15
15
1
$22.19
20
21⁄2
$87.11
-
2
$35.72
10
3
$105.38
1
21⁄2
$61.54
5
4
$163.13
1
3
$86.36
4
4
$167.20
5
BOX QTY
MI UNIONS
MI TEE
UNION
NOMINAL PIPE SIZE
PRICE
150
1
$40.48
15
300
1
$54.49
10
NOMINAL PIPE SIZE
PRICE
1⁄2
$20.40
40
3⁄4
$21.77
20
1
$24.99
12
2
$43.82
10
21⁄2
$77.68
4
NOMINAL PIPE SIZE
3
$110.54
3
PRICE
4
$241.84
4
2 x 1¹/₂
$25.64
BOX QTY
MI HEX BUSHINGS
MI 45° ELBOW NOMINAL PIPE SIZE
PRICE
BOX QTY
BOX QTY 20
CI HEX BUSHINGS BOX QTY
NOMINAL PIPE SIZE
PRICE
BOX QTY
1⁄2
$21.14
75
2 x 1⁄4
$26.93
15
3⁄4
$22.07
40
2 x 1⁄2
$28.10
15
1
$23.31
25
2 x 3⁄4
$25.83
15
2
$37.30
6
2x1
$25.45
15
21⁄2
$78.41
5
3x2
$41.38
1
3
$101.51
4
4x2
$72.23
20
4
$185.64
4
4x3
$72.23
1
MI BLACK RH COUPLINGS NOMINAL PIPE SIZE
PRICE
1
$22.97
25
BOX QTY
CI SOLID SQUARE HEAD PLUG
2
$32.06
5
3
$81.42
4
NOMINAL PIPE SIZE
PRICE
BOX QTY
4
$149.19
4
3
$59.47
1
Additional Anvil products are available to be coated upon request. 4
www.anvilintl.com
Revised:
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
FORGED STEEL 2000 FS THREADED 90° ELBOW NOMINAL PIPE SIZE
PRICE
1⁄2
$24.16
25
1
$26.96
25
BOX QTY
2
$49.74
5
21⁄2
$105.89
-
3
$158.17
32
4
$470.74
12
3000 FS THREADED 90° ELBOW
FS HEX BUSHING
NOMINAL PIPE SIZE
PRICE
BOX QTY
NOMINAL PIPE SIZE
PRICE
2
$58.77
5
1⁄2
$19.55
100
1
$21.85
50
2
$30.23
12
3
$89.12
12
4
$174.31
5
3000 FS THREADED TEE NOMINAL PIPE SIZE 1 2
PRICE $36.24 $72.85
BOX QTY
BOX QTY
3.05 7.15
2000 FS THREADED TEE 3000 FS THREADED 45° ELBOW
NOMINAL PIPE SIZE
PRICE
1⁄2
$25.63
25
NOMINAL PIPE SIZE
1
$33.01
25
PRICE
BOX QTY
2
2
$59.43
5
$69.87
5
21⁄2
$127.35
1
3
$210.49
32
4
$495.03
1
BOX QTY
3000 FS AAR THREADED UNION
2000 FS THREADED 45° ELBOW NOMINAL PIPE SIZE
PRICE
1
$30.42
25
2
$58.13
5
21⁄2
$129.70
1
3
$202.65
1
4
$481.78
1
BOX QTY
PRICE
BOX QTY
2
$122.52
5
3
$469.10
1
PRICE
1
$45.21
10
2
$78.41
9
BOX QTY
3000 FS THREADED COUPLING
2000 FS THREADED CROSS NOMINAL PIPE SIZE
NOMINAL PIPE SIZE
NOMINAL PIPE SIZE
PRICE
1
$24.33
25
BOX QTY
2
$36.29
10
21⁄2
$67.52
5
3
$115.22
1
4
$204.95
1
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
5
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
STEEL PIPE NIPPLES SCH 40 WELDED NIPPLES
SCH 80 SEAMLESS NIPPLES
PIPE SIZE
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
1⁄4 x 2
$19.16
25
1⁄4 x CLOSE
$22.78
25
21⁄2 x 6
$62.15
10
1⁄4 x 3
$19.74
25
1⁄4 x 2
$23.50
25
21⁄2 x 8
$70.36
5
1⁄4 x 4
$20.10
25
1⁄4 x 3
$24.83
25
21⁄2 x 10
$78.55
5
1⁄2 x 2
$18.80
25
1⁄4 x 4
$26.57
25
21⁄2 x 12
$86.47
5
1⁄2 x 3
$19.09
25
1⁄2 x CLOSE
$20.30
25
3 x CLOSE
$62.69
10
1⁄2 x 4
$19.49
25
1⁄2 x 2
$20.81
25
3x4
$69.84
10
1⁄2 x 6
$20.13
25
1⁄2 x 3
$21.59
25
3x6
$80.37
10
3⁄4 x 2
$19.16
25
1⁄2 x 4
$22.66
25
3x8
$92.95
5
3⁄4 x 3
$19.41
25
1⁄2 x 6
$25.32
25
3 x 10
$103.70
5
3⁄4 x 4
$19.95
25
1⁄2 x 8
$29.49
25
3 x 12
$113.39
5
1 x CLOSE
$19.85
25
1⁄2 x 10
$31.32
25
4 x CLOSE
$89.93
-
1x2
$20.10
25
1⁄2 x 12
$33.18
25
4x4
$96.81
5
1x3
$20.24
25
3⁄4 x 2
$21.10
25
4x6
$111.53
5
1x4
$21.00
25
3⁄4 x 3
$22.10
25
4x8
$122.75
2
1x6
$22.47
25
3⁄4 x 4
$23.31
25
4 x 10
$142.06
2
1x8
$25.75
25
1 x CLOSE
$22.11
25
4 x 12
$156.73
2
1 x 10
$27.19
25
1x2
$22.41
25
1 x 12
$28.67
25
1 x 2 1⁄2
$22.77
25
2 x CLOSE
$22.80
25
1x3
$23.71
25
2x3
$23.63
25
1x4
$25.25
25
2x4
$24.96
25
1x6
$28.75
25
2x5
$26.15
20
1x8
$35.44
25
2x6
$27.66
10
1 x 10
$38.10
25
2x8
$34.64
10
1 x 12
$41.20
25
2 x 10
$37.70
10
2 x CLOSE
$25.97
25
2 x 12
$40.80
5
2 x 2 1⁄2
$27.04
25
3 x CLOSE
$46.75
20
2x3
$28.63
25
3x4
$52.69
10
2x4
$30.92
25
3x6
$57.95
10
2x5
$34.52
25
3x8
$69.04
5
2x6
$36.96
15
3 x 10
$74.33
1
2x7
$45.76
10
3 x 12
$79.58
1
2x8
$48.37
10
3 x 36
$186.43
1
2x9
$50.91
10
4 x CLOSE
$68.93
1
2 x 10
$53.48
10
4x4
$73.79
1
2 x 11
$56.07
10
4x6
$81.71
1
2 x 12
$58.63
10
4x8
$88.47
1
21⁄2 x CLOSE
$49.36
10
4 x 10
$95.49
1
21⁄2 x 4
$54.27
15
4 x 12
$105.39
1
Additional Anvil products are available to be coated upon request. 6
www.anvilintl.com
Revised:
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
ADAPTER NIPPLES – GROOVED AND GROOVED BY THREAD SCH 40 ADAPTER NIPPLES
SCH 80 ADAPTER NIPPLES
PIPE SIZE
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
2x3
$42.27
12
2x3
$67.29
12
2x4
$42.27
12
2x4
$67.29
12
2x6
$46.56
12
2x6
$75.87
12
2x8
$50.78
12
2x8
$84.31
12
2 x 10
$54.58
12
2 x 10
$91.90
12
2 x 12
$57.87
12
2 x 12
$98.49
12
3x3
$63.86
12
3x4
$101.16
12
3x4
$63.89
12
3x6
$111.08
12
3x6
$68.62
12
3x8
$127.16
6
3x8
$76.66
12
3 x 10
$142.96
6
3 x 10
$84.56
6
3 x 12
$161.96
6
3 x 12
$94.06
6
4x4
$130.37
12
4x4
$84.13
12
4x6
$140.74
6
4x6
$89.32
6
4x8
$173.75
6
4x8
$105.82
6
4 x 10
$198.33
4
4 x 10
$118.11
4
4 x 12
$217.28
4
4 x 12
$127.59
4
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
7
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
SWAGE NIPPLES SCH 40 SWAGE NIPPLES
SCH 80 SWAGE NIPPLES
PIPE SIZE
PRICE
BOX QTY
2 x 1 TBE
$77.59
12
PIPE SIZE 1 x ¹∕4 TBE
PRICE
BOX QTY
$48.25
12
2 x 1¹∕4 TBE
$85.25
12
1¹∕₂ x 1 TBE
$60.15
12
2 x 1¹∕₂ TBE
$68.60
12
2 x ¹∕₂ TBE
$105.32
12
2¹∕₂ x 2 TBE
$85.10
12
2 x 1 TBE
$86.93
12
3 x 1 TBE
$131.16
12
2 x 1¹∕4 TBE
$91.16
1
3 x 2 TBE
$100.20
12
2 x 1¹∕₂ TBE
$86.93
12
$103.59
12
4 x 2 TBE
$155.29
6
2¹∕₂ x 2 TBE
4 x 3 TBE
$145.67
6
3 x 2 TBE
$122.00
6
2¹∕₂ x 2 GXT
$88.34
12
3 x 2¹∕₂ TBE
$122.00
12
2 x 1 GXT
$80.61
12
4 x 2 TBE
$196.64
4
2 x 1¹∕₂ GXT
$71.17
12
4 x 3 TBE
$182.44
4
3 x 1¹∕4 GXT
$146.28
1
2 x 1 GXT
$90.41
12
3 x 2 GXT
$103.90
12
2¹∕₂ x 2 GXT
$103.59
12
4 x 2 GXT
$161.16
6
3 x 2 GXT
$126.80
6
4 x 3 GXT
$151.06
6
4 x 2 GXT
$204.58
12
2¹∕₂ x 2 TXG
$88.34
12
4 x 3 GXT
$189.66
6
3 x 2 TXG
$103.90
12
3 x 2 TXG
$126.80
12
4 x 2 TXG
$161.16
6
4 x 2 TXG
$204.58
12
4 x 3 TXG
$151.06
6
4 x 3 TXG
$189.66
12
2¹∕₂ x 2 GBE
$91.57
12
2¹∕₂ x 2 GBE
$111.91
12
3 x 2 GBE
$107.60
12
3 x 2 GBE
$131.59
6
4 x 2 GBE
$167.03
6
3 x 2¹∕₂ GBE
$131.59
12
4 x 3 GBE
$156.45
6
4 x 2 GBE
$212.52
12
4 x 3 GBE
$196.89
12
Additional Anvil products are available to be coated upon request. 8
www.anvilintl.com
Revised:
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
OIL COUNTRY SWAGE NIPPLES–Large End Upset Reduced to Regular or Upset PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2¹∕₂ EUE 8RD x 2 EUE 8RD STD J55 SWAGE NIPPLE 2¹∕₂ UP 8RD x 2LP STD J55 SWAGE NIPPLE 2¹∕₂ UP 8RD x 2 GRV STD J55 SWAGE NIPPLE 3UP 8RD x 2UP 8RD STD J55 SWAGE NIPPLE 3UP 8RD x 2LP STD J55 SWAGE NIPPLE 3UP 8RD x 2¹∕₂ UP 8R STD J55 SWAGE NIPPLE 3UP 8RD x 2¹∕₂ LP STD J55 SWAGE NIPPLE 3GRV x 2UP 8RD STD J55 SWAGE NIPPLE 3GRV x 2¹∕₂ UP 8RD STD J55 SWAGE NIPPLE 2¹∕₂ UP 8RD x 2LP XH SWAGE NIPPLE
$283.32 $283.32 $296.47 $370.51 $370.51 $370.51 $370.51 $340.64 $340.64 $360.20
6 6 6 1 1 1 1 1 1 1
TUBING NIPPLES–18" and Shorter Upset and Non-Upset PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2 EUE 8RD BE x 6 STD J55 TUBING NIPPLE 2UP 8RD x 2LP x 6 STD J55 TUBING NIPPLE 2UP 8RD x 2GRV x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD BE x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂GRV x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂LP x 6 STD J55 TUBING NIPPLE 3UP 8RD x 3GRV x 6 STD J55 TUBING NIPPLE 3UP 8RD x 3 8V x 6 STD J55 TUBING NIPPLE 2UP 8RD x 2LP x 6 XH TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂LP x 6 XH TUBING NIPPLE
$117.34 $117.34 $122.34 $173.34 $180.99 $173.34 $290.25 $266.50 $217.42 $326.29
12 12 12 1 6 6 1 1 1 1
API TUBING COUPLINGS–18" and Shorter Upset and Non-Upset PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2 UP 8RD J55 API TUBING COUPLING 2¹∕₂ UP 8RD J55 API TUBING COUPLING
POA POA
1 1
PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2UP 8RD STD BULL PLUG 2¹∕₂UP 8RD STD BULL PLUG
$122.34 $165.50
12 1
BULL PLUGS
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
9
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
BULL PLUGS PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2 S40 RND CARBON STEEL BULL PLUG 3 STD BULL PLUG 4 STD BULL PLUG 2 XH BULL PLUG 3 XH BULL PLUG 4 XH BULL PLUG
$61.28 $114.43 $148.88 $82.43 $136.83 $194.04
12 6 6 12 6 1
PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2 STD ¹∕₄ TAP CRBN STL 2 STD ¹∕₂ TAP CRBN STL 2 S80 ¹∕₄ TAP CRBN STL 2 XH ¹∕₂ TAP BULL PLUG
$68.16 $68.16 $89.31 $89.31
12 12 12 12
TAPPED BULL PLUGS
CATAWISSA HAMMER UNIONS FIG. 100 HAMMER UNION NOMINAL PIPE SIZE
PRICE
BOX QTY
FIG. 200 HAMMER UNION NOMINAL PIPE SIZE
PRICE
BOX QTY
2
$74.21
12
1
$52.13
36
2 ¹/₂
$138.32
8
2*
$70.75
14
3
$132.59
6
2 ¹/₂
$199.68
8
4
$207.17
2
3
$195.41
6
4
$234.27
4
FIG. 300 HAMMER UNION NOMINAL PIPE SIZE 2
PRICE $114.03
BOX QTY 12
*Ductile Iron
Additional Anvil products are available to be coated upon request. 10
www.anvilintl.com
Revised:
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
FITTINGS FOR GROOVED END PIPE 90° ELBOW, FIG. 7050 NOMINAL PIPE SIZE
PRICE
CROSS, FIG. 7068 NOMINAL PIPE SIZE
BOX QTY
PRICE
BOX QTY
2
$83.60
18
2
$194.11
1
3
$143.25
8
3
$340.83
1
4
$165.25
4
4
$560.13
1
REDUCING TEE, FIG. 7061
45° ELBOW, FIG. 7051 NOMINAL PIPE SIZE
PRICE
BOX QTY
2
$83.60
-
3
$143.28
1
4
$165.25
-
PRICE
BOX QTY
2
$119.87
16
3
$166.96
1
4
$252.29
-
PRICE
3x3x2
$210.69
BOX QTY 1
CONCENTRIC REDUCER (GR X GR), FIG. 7072
TEES, FIG. 7060 NOMINAL PIPE SIZE
NOMINAL PIPE SIZE
NOMINAL PIPE SIZE
PRICE
BOX QTY
2¹/₂ x 2
$95.07
1
3x2
$92.08
1
4x2
$125.57
1
4x3
$146.48
1
CONCENTRIC REDUCER (GRV X THD), FIG. 7076
CAPS, FIG. 7074 NOMINAL PIPE SIZE
PRICE
2
$71.44
30
2 -¹/₂ TAP
$110.05
1
3
$80.35
15
4
$96.13
10
BOX QTY
NOMINAL PIPE SIZE 3x2
PRICE $121.73
BOX QTY 1
DI BODY WITH 316 SS TRIM, FIG. 7500 NOMINAL PIPE SIZE
WITH TWO POSITION HANDLE OR WITH TWO POSITION LOCKING HANDLE
2
POA
3
POA
4
POA
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
11
corporatE officEs 2 Holland Way Exeter, NH 03833 Tel: 603-418-2800 • Fax: 603-418-2833 E-mail: [email protected]
customEr sErvicE cEntErs unitEd statEs
EuropE and middlE East
University Park, IL Tel: 708-885-3000 • Fax: 708-534-5441 Toll Free: 1-800-301-2701
Tel: +31-53-5725570 • Fax: +31-53-5725579 International Customer Service Tel: +1-708-885-3000 • Fax: +1-708-534-5441
Irving, TX Tel: 972-871-1206 • Fax: 972-641-8946 Toll Free: 1-800-451-4414
mExico, puErto rico and latin amErica International Customer Service Tel: +1-708-885-3000 • Fax: +1-708-534-5441
canada Simcoe, Ontario Tel: 519-426-4551 • Fax: 519-426-5509
u.s. rEGional distriBution cEntErs univErsitY parK
750 Central Avenue University Park, IL 60484
irvinG
1401 Valley View Lane, Suite 150 Irving, TX 75061
columBia
800 Malleable Road Columbia, PA 17512
ontario
1470 S. Vintage Avenue Ontario, CA 91761
anvil Eps Engineered Pipe Supports Customer Service Center 160 Frenchtown Road North Kingstown, RI 02852 Tel: 401-886-3000 Fax: 401-886-3010 Toll Free: 1-877-406-3108
additional invEntorY locations* unitEd statEs: Arizona, Colorado, Georgia, Indiana, Massachusetts, Minnesota, Missouri, New York, Tennessee, Texas, Washington and Wisconsin
intErnational: Ontario, Canada
#755 / Printed in USA / © 2013 Revision: November 11, 2013
*Inventory varies at locations b u i l d i n g
c o n n e c t i o n s
t h a t
l a s t
North Alabama Pipe Innovators of Pipe Fabrication Equipment
www.anvilintl.com
FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • UPC numbers numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s website at www.anvilintl.com. • Pricing is subject to change without notice. Go to Anvil’s website for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.
NORTHERN REGION CUSTOMER SERVICE CENTER
80 0 -301-2701
SOUTHERN REGION CUSTOMER SERVICE CENTER
www.anvilintl.com
80 0 - 451- 4 414
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
6. SHIPMENTS:
1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.
2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.
3. WARRANTY: Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
4. SELLER’S LIABILITY: Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.
5. RETURNS: Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.
All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.
7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.
8. PRICES AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated.
9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.
10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to selfinsure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.
11. MINIMUM INVOICE: Domestic: $100 plus transportation. International: $500 plus transportation.
12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments.
Additional Anvil products are available to be coated upon request. 2
www.anvilintl.com
Revised:
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
TABLE OF CONTENTS ANVIL CORVEL COATED PRODUCTS Malleable Iron, Cast Iron, and Steel Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Forged Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Steel Pipe Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Swage Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 JB Smith Oil Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Swage Nipples Tubing Nipples API Tubing Couplings Bull Plugs JB Smith Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 JB Smith Tapped Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Catawissa Hammer Unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Gruvlok . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revised:
www.anvilintl.com
3
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
MALLEABLE IRON, CAST IRON, AND STEEL FITTINGS STEEL XH API COUPLING
MI 90° ELBOW NOMINAL PIPE SIZE
PRICE
1⁄2
$19.61
3⁄4
NOMINAL PIPE SIZE
PRICE
BOX QTY
50
1
$35.62
25
$20.09
35
2
$62.15
15
1
$22.19
20
21⁄2
$87.11
-
2
$35.72
10
3
$105.38
1
21⁄2
$61.54
5
4
$163.13
1
3
$86.36
4
4
$167.20
5
BOX QTY
MI UNIONS
MI TEE
UNION
NOMINAL PIPE SIZE
PRICE
150
1
$40.48
15
300
1
$54.49
10
NOMINAL PIPE SIZE
PRICE
1⁄2
$20.40
40
3⁄4
$21.77
20
1
$24.99
12
2
$43.82
10
21⁄2
$77.68
4
NOMINAL PIPE SIZE
3
$110.54
3
PRICE
4
$241.84
4
2 x 1¹/₂
$25.64
BOX QTY
MI HEX BUSHINGS
MI 45° ELBOW NOMINAL PIPE SIZE
PRICE
BOX QTY
BOX QTY 20
CI HEX BUSHINGS BOX QTY
NOMINAL PIPE SIZE
PRICE
BOX QTY
1⁄2
$21.14
75
2 x 1⁄4
$26.93
15
3⁄4
$22.07
40
2 x 1⁄2
$28.10
15
1
$23.31
25
2 x 3⁄4
$25.83
15
2
$37.30
6
2x1
$25.45
15
21⁄2
$78.41
5
3x2
$41.38
1
3
$101.51
4
4x2
$72.23
20
4
$185.64
4
4x3
$72.23
1
MI BLACK RH COUPLINGS NOMINAL PIPE SIZE
PRICE
1
$22.97
25
BOX QTY
CI SOLID SQUARE HEAD PLUG
2
$32.06
5
3
$81.42
4
NOMINAL PIPE SIZE
PRICE
BOX QTY
4
$149.19
4
3
$59.47
1
Additional Anvil products are available to be coated upon request. 4
www.anvilintl.com
Revised:
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
FORGED STEEL 2000 FS THREADED 90° ELBOW NOMINAL PIPE SIZE
PRICE
1⁄2
$24.16
25
1
$26.96
25
BOX QTY
2
$49.74
5
21⁄2
$105.89
-
3
$158.17
32
4
$470.74
12
3000 FS THREADED 90° ELBOW
FS HEX BUSHING
NOMINAL PIPE SIZE
PRICE
BOX QTY
NOMINAL PIPE SIZE
PRICE
2
$58.77
5
1⁄2
$19.55
100
1
$21.85
50
2
$30.23
12
3
$89.12
12
4
$174.31
5
3000 FS THREADED TEE NOMINAL PIPE SIZE 1 2
PRICE $36.24 $72.85
BOX QTY
BOX QTY
3.05 7.15
2000 FS THREADED TEE 3000 FS THREADED 45° ELBOW
NOMINAL PIPE SIZE
PRICE
1⁄2
$25.63
25
NOMINAL PIPE SIZE
1
$33.01
25
PRICE
BOX QTY
2
2
$59.43
5
$69.87
5
21⁄2
$127.35
1
3
$210.49
32
4
$495.03
1
BOX QTY
3000 FS AAR THREADED UNION
2000 FS THREADED 45° ELBOW NOMINAL PIPE SIZE
PRICE
1
$30.42
25
2
$58.13
5
21⁄2
$129.70
1
3
$202.65
1
4
$481.78
1
BOX QTY
PRICE
BOX QTY
2
$122.52
5
3
$469.10
1
PRICE
1
$45.21
10
2
$78.41
9
BOX QTY
3000 FS THREADED COUPLING
2000 FS THREADED CROSS NOMINAL PIPE SIZE
NOMINAL PIPE SIZE
NOMINAL PIPE SIZE
PRICE
1
$24.33
25
BOX QTY
2
$36.29
10
21⁄2
$67.52
5
3
$115.22
1
4
$204.95
1
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
5
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
STEEL PIPE NIPPLES SCH 40 WELDED NIPPLES
SCH 80 SEAMLESS NIPPLES
PIPE SIZE
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
1⁄4 x 2
$19.16
25
1⁄4 x CLOSE
$22.78
25
21⁄2 x 6
$62.15
10
1⁄4 x 3
$19.74
25
1⁄4 x 2
$23.50
25
21⁄2 x 8
$70.36
5
1⁄4 x 4
$20.10
25
1⁄4 x 3
$24.83
25
21⁄2 x 10
$78.55
5
1⁄2 x 2
$18.80
25
1⁄4 x 4
$26.57
25
21⁄2 x 12
$86.47
5
1⁄2 x 3
$19.09
25
1⁄2 x CLOSE
$20.30
25
3 x CLOSE
$62.69
10
1⁄2 x 4
$19.49
25
1⁄2 x 2
$20.81
25
3x4
$69.84
10
1⁄2 x 6
$20.13
25
1⁄2 x 3
$21.59
25
3x6
$80.37
10
3⁄4 x 2
$19.16
25
1⁄2 x 4
$22.66
25
3x8
$92.95
5
3⁄4 x 3
$19.41
25
1⁄2 x 6
$25.32
25
3 x 10
$103.70
5
3⁄4 x 4
$19.95
25
1⁄2 x 8
$29.49
25
3 x 12
$113.39
5
1 x CLOSE
$19.85
25
1⁄2 x 10
$31.32
25
4 x CLOSE
$89.93
-
1x2
$20.10
25
1⁄2 x 12
$33.18
25
4x4
$96.81
5
1x3
$20.24
25
3⁄4 x 2
$21.10
25
4x6
$111.53
5
1x4
$21.00
25
3⁄4 x 3
$22.10
25
4x8
$122.75
2
1x6
$22.47
25
3⁄4 x 4
$23.31
25
4 x 10
$142.06
2
1x8
$25.75
25
1 x CLOSE
$22.11
25
4 x 12
$156.73
2
1 x 10
$27.19
25
1x2
$22.41
25
1 x 12
$28.67
25
1 x 2 1⁄2
$22.77
25
2 x CLOSE
$22.80
25
1x3
$23.71
25
2x3
$23.63
25
1x4
$25.25
25
2x4
$24.96
25
1x6
$28.75
25
2x5
$26.15
20
1x8
$35.44
25
2x6
$27.66
10
1 x 10
$38.10
25
2x8
$34.64
10
1 x 12
$41.20
25
2 x 10
$37.70
10
2 x CLOSE
$25.97
25
2 x 12
$40.80
5
2 x 2 1⁄2
$27.04
25
3 x CLOSE
$46.75
20
2x3
$28.63
25
3x4
$52.69
10
2x4
$30.92
25
3x6
$57.95
10
2x5
$34.52
25
3x8
$69.04
5
2x6
$36.96
15
3 x 10
$74.33
1
2x7
$45.76
10
3 x 12
$79.58
1
2x8
$48.37
10
3 x 36
$186.43
1
2x9
$50.91
10
4 x CLOSE
$68.93
1
2 x 10
$53.48
10
4x4
$73.79
1
2 x 11
$56.07
10
4x6
$81.71
1
2 x 12
$58.63
10
4x8
$88.47
1
21⁄2 x CLOSE
$49.36
10
4 x 10
$95.49
1
21⁄2 x 4
$54.27
15
4 x 12
$105.39
1
Additional Anvil products are available to be coated upon request. 6
www.anvilintl.com
Revised:
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
ADAPTER NIPPLES – GROOVED AND GROOVED BY THREAD SCH 40 ADAPTER NIPPLES
SCH 80 ADAPTER NIPPLES
PIPE SIZE
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
2x3
$42.27
12
2x3
$67.29
12
2x4
$42.27
12
2x4
$67.29
12
2x6
$46.56
12
2x6
$75.87
12
2x8
$50.78
12
2x8
$84.31
12
2 x 10
$54.58
12
2 x 10
$91.90
12
2 x 12
$57.87
12
2 x 12
$98.49
12
3x3
$63.86
12
3x4
$101.16
12
3x4
$63.89
12
3x6
$111.08
12
3x6
$68.62
12
3x8
$127.16
6
3x8
$76.66
12
3 x 10
$142.96
6
3 x 10
$84.56
6
3 x 12
$161.96
6
3 x 12
$94.06
6
4x4
$130.37
12
4x4
$84.13
12
4x6
$140.74
6
4x6
$89.32
6
4x8
$173.75
6
4x8
$105.82
6
4 x 10
$198.33
4
4 x 10
$118.11
4
4 x 12
$217.28
4
4 x 12
$127.59
4
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
7
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
SWAGE NIPPLES SCH 40 SWAGE NIPPLES
SCH 80 SWAGE NIPPLES
PIPE SIZE
PRICE
BOX QTY
2 x 1 TBE
$77.59
12
PIPE SIZE 1 x ¹∕4 TBE
PRICE
BOX QTY
$48.25
12
2 x 1¹∕4 TBE
$85.25
12
1¹∕₂ x 1 TBE
$60.15
12
2 x 1¹∕₂ TBE
$68.60
12
2 x ¹∕₂ TBE
$105.32
12
2¹∕₂ x 2 TBE
$85.10
12
2 x 1 TBE
$86.93
12
3 x 1 TBE
$131.16
12
2 x 1¹∕4 TBE
$91.16
1
3 x 2 TBE
$100.20
12
2 x 1¹∕₂ TBE
$86.93
12
$103.59
12
4 x 2 TBE
$155.29
6
2¹∕₂ x 2 TBE
4 x 3 TBE
$145.67
6
3 x 2 TBE
$122.00
6
2¹∕₂ x 2 GXT
$88.34
12
3 x 2¹∕₂ TBE
$122.00
12
2 x 1 GXT
$80.61
12
4 x 2 TBE
$196.64
4
2 x 1¹∕₂ GXT
$71.17
12
4 x 3 TBE
$182.44
4
3 x 1¹∕4 GXT
$146.28
1
2 x 1 GXT
$90.41
12
3 x 2 GXT
$103.90
12
2¹∕₂ x 2 GXT
$103.59
12
4 x 2 GXT
$161.16
6
3 x 2 GXT
$126.80
6
4 x 3 GXT
$151.06
6
4 x 2 GXT
$204.58
12
2¹∕₂ x 2 TXG
$88.34
12
4 x 3 GXT
$189.66
6
3 x 2 TXG
$103.90
12
3 x 2 TXG
$126.80
12
4 x 2 TXG
$161.16
6
4 x 2 TXG
$204.58
12
4 x 3 TXG
$151.06
6
4 x 3 TXG
$189.66
12
2¹∕₂ x 2 GBE
$91.57
12
2¹∕₂ x 2 GBE
$111.91
12
3 x 2 GBE
$107.60
12
3 x 2 GBE
$131.59
6
4 x 2 GBE
$167.03
6
3 x 2¹∕₂ GBE
$131.59
12
4 x 3 GBE
$156.45
6
4 x 2 GBE
$212.52
12
4 x 3 GBE
$196.89
12
Additional Anvil products are available to be coated upon request. 8
www.anvilintl.com
Revised:
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
OIL COUNTRY SWAGE NIPPLES–Large End Upset Reduced to Regular or Upset PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2¹∕₂ EUE 8RD x 2 EUE 8RD STD J55 SWAGE NIPPLE 2¹∕₂ UP 8RD x 2LP STD J55 SWAGE NIPPLE 2¹∕₂ UP 8RD x 2 GRV STD J55 SWAGE NIPPLE 3UP 8RD x 2UP 8RD STD J55 SWAGE NIPPLE 3UP 8RD x 2LP STD J55 SWAGE NIPPLE 3UP 8RD x 2¹∕₂ UP 8R STD J55 SWAGE NIPPLE 3UP 8RD x 2¹∕₂ LP STD J55 SWAGE NIPPLE 3GRV x 2UP 8RD STD J55 SWAGE NIPPLE 3GRV x 2¹∕₂ UP 8RD STD J55 SWAGE NIPPLE 2¹∕₂ UP 8RD x 2LP XH SWAGE NIPPLE
$283.32 $283.32 $296.47 $370.51 $370.51 $370.51 $370.51 $340.64 $340.64 $360.20
6 6 6 1 1 1 1 1 1 1
TUBING NIPPLES–18" and Shorter Upset and Non-Upset PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2 EUE 8RD BE x 6 STD J55 TUBING NIPPLE 2UP 8RD x 2LP x 6 STD J55 TUBING NIPPLE 2UP 8RD x 2GRV x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD BE x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂GRV x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂LP x 6 STD J55 TUBING NIPPLE 3UP 8RD x 3GRV x 6 STD J55 TUBING NIPPLE 3UP 8RD x 3 8V x 6 STD J55 TUBING NIPPLE 2UP 8RD x 2LP x 6 XH TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂LP x 6 XH TUBING NIPPLE
$117.34 $117.34 $122.34 $173.34 $180.99 $173.34 $290.25 $266.50 $217.42 $326.29
12 12 12 1 6 6 1 1 1 1
API TUBING COUPLINGS–18" and Shorter Upset and Non-Upset PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2 UP 8RD J55 API TUBING COUPLING 2¹∕₂ UP 8RD J55 API TUBING COUPLING
POA POA
1 1
PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2UP 8RD STD BULL PLUG 2¹∕₂UP 8RD STD BULL PLUG
$122.34 $165.50
12 1
BULL PLUGS
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
9
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
BULL PLUGS PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2 S40 RND CARBON STEEL BULL PLUG 3 STD BULL PLUG 4 STD BULL PLUG 2 XH BULL PLUG 3 XH BULL PLUG 4 XH BULL PLUG
$61.28 $114.43 $148.88 $82.43 $136.83 $194.04
12 6 6 12 6 1
PRIMARY DESCRIPTION
PRICE EACH
BOX QTY
2 STD ¹∕₄ TAP CRBN STL 2 STD ¹∕₂ TAP CRBN STL 2 S80 ¹∕₄ TAP CRBN STL 2 XH ¹∕₂ TAP BULL PLUG
$68.16 $68.16 $89.31 $89.31
12 12 12 12
TAPPED BULL PLUGS
CATAWISSA HAMMER UNIONS FIG. 100 HAMMER UNION NOMINAL PIPE SIZE
PRICE
BOX QTY
FIG. 200 HAMMER UNION NOMINAL PIPE SIZE
PRICE
BOX QTY
2
$74.21
12
1
$52.13
36
2 ¹/₂
$138.32
8
2*
$70.75
14
3
$132.59
6
2 ¹/₂
$199.68
8
4
$207.17
2
3
$195.41
6
4
$234.27
4
FIG. 300 HAMMER UNION NOMINAL PIPE SIZE 2
PRICE $114.03
BOX QTY 12
*Ductile Iron
Additional Anvil products are available to be coated upon request. 10
www.anvilintl.com
Revised:
ANVIL CORVEL COATED PRODUCTS PriceList
Effective Date: November 4, 2013 | Replaces Prior Date: May 2013 | Sheet # COR-11.13
FITTINGS FOR GROOVED END PIPE 90° ELBOW, FIG. 7050 NOMINAL PIPE SIZE
PRICE
CROSS, FIG. 7068 NOMINAL PIPE SIZE
BOX QTY
PRICE
BOX QTY
2
$83.60
18
2
$194.11
1
3
$143.25
8
3
$340.83
1
4
$165.25
4
4
$560.13
1
REDUCING TEE, FIG. 7061
45° ELBOW, FIG. 7051 NOMINAL PIPE SIZE
PRICE
BOX QTY
2
$83.60
-
3
$143.28
1
4
$165.25
-
PRICE
BOX QTY
2
$119.87
16
3
$166.96
1
4
$252.29
-
PRICE
3x3x2
$210.69
BOX QTY 1
CONCENTRIC REDUCER (GR X GR), FIG. 7072
TEES, FIG. 7060 NOMINAL PIPE SIZE
NOMINAL PIPE SIZE
NOMINAL PIPE SIZE
PRICE
BOX QTY
2¹/₂ x 2
$95.07
1
3x2
$92.08
1
4x2
$125.57
1
4x3
$146.48
1
CONCENTRIC REDUCER (GRV X THD), FIG. 7076
CAPS, FIG. 7074 NOMINAL PIPE SIZE
PRICE
2
$71.44
30
2 -¹/₂ TAP
$110.05
1
3
$80.35
15
4
$96.13
10
BOX QTY
NOMINAL PIPE SIZE 3x2
PRICE $121.73
BOX QTY 1
DI BODY WITH 316 SS TRIM, FIG. 7500 NOMINAL PIPE SIZE
WITH TWO POSITION HANDLE OR WITH TWO POSITION LOCKING HANDLE
2
POA
3
POA
4
POA
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
11
corporatE officEs 2 Holland Way Exeter, NH 03833 Tel: 603-418-2800 • Fax: 603-418-2833 E-mail: [email protected]
customEr sErvicE cEntErs unitEd statEs
EuropE and middlE East
University Park, IL Tel: 708-885-3000 • Fax: 708-534-5441 Toll Free: 1-800-301-2701
Tel: +31-53-5725570 • Fax: +31-53-5725579 International Customer Service Tel: +1-708-885-3000 • Fax: +1-708-534-5441
Irving, TX Tel: 972-871-1206 • Fax: 972-641-8946 Toll Free: 1-800-451-4414
mExico, puErto rico and latin amErica International Customer Service Tel: +1-708-885-3000 • Fax: +1-708-534-5441
canada Simcoe, Ontario Tel: 519-426-4551 • Fax: 519-426-5509
u.s. rEGional distriBution cEntErs univErsitY parK
750 Central Avenue University Park, IL 60484
irvinG
1401 Valley View Lane, Suite 150 Irving, TX 75061
columBia
800 Malleable Road Columbia, PA 17512
ontario
1470 S. Vintage Avenue Ontario, CA 91761
anvil Eps Engineered Pipe Supports Customer Service Center 160 Frenchtown Road North Kingstown, RI 02852 Tel: 401-886-3000 Fax: 401-886-3010 Toll Free: 1-877-406-3108
additional invEntorY locations* unitEd statEs: Arizona, Colorado, Georgia, Indiana, Massachusetts, Minnesota, Missouri, New York, Tennessee, Texas, Washington and Wisconsin
intErnational: Ontario, Canada
#755 / Printed in USA / © 2013 Revision: November 11, 2013
*Inventory varies at locations b u i l d i n g
c o n n e c t i o n s
t h a t
l a s t
North Alabama Pipe Innovators of Pipe Fabrication Equipment
www.anvilintl.com
