Anvil iPC CoAted ProduCts - Anvil International
Anvil IPC Coated Products
Price Sheet IPC-3.09 | Effective: March 23, 2009 | Cancels Price Sheet IPC-10.08 of October 13, 2008
FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • Upc numbers and SPIN commodity identification numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s Web site at www.anvilintl.com. • Pricing is subject to change without notice. Go to Anvil’s Web site for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. REVISIONS July 6, 2009: Page 9 – API Tubing Couplings
LIST = POA
EasterN Region
80 0 -301-2701
Northern Region
80 0 -301-2701
Southern Region
80 0 - 451- 4 414
www.anvilintl.com
western Region
80 0 - 451- 4 414
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
6. SHIPMENTS:
1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.
2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.
3. WARRANTY: Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.
5. RETURNS: Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.
Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.
7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.
8. PRICES AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated.
9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.
10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to self-insure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.
11. MINIMUM INVOICE: Domestic: $100 plus transportation. International: $500 plus transportation.
12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.
4. SELLER’S LIABILITY:
Revised:
All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment.
NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments (weighing less than 2,500 pounds) will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments.
www.anvilintl.com
2
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
TABLE OF CONTENTS ANVIL IPC COATED PRODUCTS Malleable Iron and Cast Iron Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Forged Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Steel Pipe Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Swage Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 JB Smith Swages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 JB Smith Tubing Nipples – Standard Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 JB Smith API Tubing Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 JB Smith Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 JB Smith Tapped Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 JB Smith Bull Plugs Oil Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Catawissa Hammer Unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Fittings for Grooved End Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revised:
www.anvilintl.com
3
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
MALLEABLE IRON AND CAST IRON FITTINGS 90° ELBOW
XH API REC T/T COUPLING
Nominal pipe size
Price
Box QTY
Nominal pipe size
Price
Box QTY
1⁄2
$12.25
50
1
$14.35
25
3⁄4
$12.59
35
2
$19.76
15
1
$14.04
20
21⁄2
$28.05
1
2
$23.43
10
3
$33.10
1
21⁄2
$43.01
5
4
$49.36
1
3
$58.75
4
4
$113.60
5
UNIONS
TEE Nominal pipe size
Price
Box QTY
1⁄2
$12.80
40
3⁄4
$13.75
20
1
$15.98
12
2
$29.06
10
21⁄2
$54.22
4
3
$75.54
3
4
$165.42
4
Price
Box QTY
1⁄2
$13.31
75
3⁄4
$13.95
40
1
$14.82
25
2
$24.53
6
21⁄2
$54.73
5
3
$69.27
4
4
$126.41
4
Nominal pipe size
Price
Box QTY
150
1
$21.44
15
300
1
$30.65
10
MI HEX BUSHINGS
45° ELBOW Nominal pipe size
UNION
Nominal pipe size
Price
Box QTY
2 x ¹/₄
$17.33
15
2 x 1¹/₂
$16.43
20
CAST IRON HEX BUSHING
BLACK RH COUPLINGS
Nominal pipe size
Price
Box QTY
2 x 1⁄2
$18.14
15
2 x 3⁄4
$16.57
15
2x1
$16.30
15
3x2
$21.18
1
4x2
$34.45
20
4x3
$34.45
1
Nominal pipe size
Price
Box QTY
¹/₂
$12.85
20
³/₄
$13.25
60
1
$14.53
25
2
$20.83
5
3
$55.12
4
Nominal pipe size
Price
Box QTY
4
$100.69
4
3
$21.96
1
CAST IRON CORED SQUARE HEAD PLUG
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
4
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
FORGED STEEL 2000 FS THREADED 90° ELBOW Nominal pipe size
Price
Box QTY
1⁄2
$16.75
25
1
$19.23
2
$39.44
21⁄2 3 4
$408.00
1
3000 FS THREADED COUPLING Nominal pipe size
Price
Box QTY
1
$16.76
25
25
2
$27.13
10
5
21⁄2
$54.97
5
$90.33
1
3
$94.24
1
$134.12
1
4
$168.80
1
2000 FS THREADED TEE Nominal pipe size
Price
Box QTY
1⁄2
$18.04
25
1
$24.60
25
2
$48.05
5
21⁄2
$109.37
1
3
$180.56
1
4
$429.55
1
3000 FS HEX UNION
Price
Box QTY
1
$22.30
25
2
$46.89
5
21⁄2
$111.46
1
3
$173.60
1
4
$417.80
1
Price
Box QTY
1
$29.02
10
FS HEX BUSHING
2000 FS THREADED 45° ELBOW Nominal pipe size
Nominal pipe size
Nominal pipe size
Price
1⁄2
$12.61
100
1
$14.61
50
2
$21.88
12
3
$71.59
12
4
$142.21
5
Box QTY
2000 FS THREADED CROSS Nominal pipe size
Price
Box QTY
2
$104.04
5
3
$410.08
1
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
5
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
STEEL PIPE NIPPLES SCH 40 WELDED NIPPLES
SCH 80 SEAMLESS NIPPLES
PIPE SIZE
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
1⁄4 x 2
$11.96
25
1⁄4 x CLOSE
$15.08
25
21⁄2 x 6
$48.22
10
1⁄4 x 3
$12.35
25
1⁄4 x 2
$15.67
25
21⁄2 x 8
$54.86
5
1⁄4 x 4
$12.62
25
1⁄4 x 3
$16.74
25
21⁄2 x 10
$61.48
5
1⁄2 x 2
$11.71
25
1⁄4 x 4
$18.15
25
21⁄2 x 12
$67.88
5
1⁄2 x 3
$11.91
25
1⁄2 x CLOSE
$13.08
25
3 x CLOSE
$46.50
10
1⁄2 x 4
$12.17
25
1⁄2 x 11⁄2
$13.49
25
3x3
$51.33
20
1⁄2 x 6
$12.65
25
1⁄2 x 2
$13.49
25
3x4
$52.29
10
3⁄4 x 2
$11.96
25
1⁄2 x 3
$14.12
25
3x6
$60.80
10
3⁄4 x 3
$12.14
25
1⁄2 x 4
$14.99
25
3x8
$70.98
5
3⁄4 x 4
$12.50
25
1⁄2 x 6
$17.14
25
3 x 10
$79.67
5
1 x CLOSE
$12.43
25
1⁄2 x 8
$20.50
25
3 x 12
$87.51
5
1x2
$12.61
25
1⁄2 x 10
$21.99
25
4 x CLOSE
$65.92
1
1x3
$12.72
25
1⁄2 x 12
$23.50
25
4x4
$71.48
5
1x4
$13.23
25
3⁄4 x 2
$13.72
25
4x6
$83.39
5
1x6
$14.29
25
3⁄4 x 3
$14.53
25
4x8
$96.41
2
1x8
$16.61
25
3⁄4 x 4
$15.51
25
4 x 10
$108.09
2
4 x 12
$119.94
2
1 x 10
$17.63
25
1 x CLOSE
$14.54
25
1 x 12
$18.66
25
1x2
$14.78
25
2 x CLOSE
$14.53
25
1x3
$15.83
25
2x3
$15.11
25
1x4
$17.08
25
2x4
$16.04
25
1x6
$19.91
25
2x5
$16.88
25
1x8
$25.32
25
2x6
$17.94
25
1 x 10
$27.47
25
2x7
$22.91
10
1 x 12
$29.99
25
2x8
$22.90
10
2 x CLOSE
$17.66
25
2 x 10
$25.06
10
2 x 21⁄2
$18.52
25
2 x 12
$27.25
10
2x3
$19.81
25
2 x 24
$115.99
1
2x4
$21.66
25
2 x 36
$153.85
1
2x5
$24.57
25
3 x CLOSE
$31.50
10
2x6
$26.55
15
3x3
$32.77
10
2x7
$33.67
10
3x4
$35.69
10
2x8
$35.77
10
3x6
$39.40
10
2x9
$37.84
10
3x8
$47.25
5
2 x 10
$39.91
10
3 x 10
$50.99
5
2 x 11
$42.01
10
3 x 12
$54.71
5
2 x 12
$44.08
10
4 x CLOSE
$45.75
5
2 x 24
$119.68
1
4x4
$49.19
5
2 x 36
$165.65
1
4x6
$54.79
5
21⁄2 x CLOSE
$37.88
10
4x8
$59.57
2
21⁄2 x 4
$41.85
15
4 x 10
$64.53
2
4 x 12
$71.54
2
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
6
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
ADAPTER NIPPLES – GROOVED AND GROOVED BY THREAD SCH 40 ADAPTER NIPPLES PIPE SIZE
SCH 80 ADAPTER NIPPLES
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
2x3
$30.85
12
2x4
$30.85
12
2x3
$51.08
12
2x4
$51.08
12
2x6
$34.32
2x8
$37.73
12
2x6
$58.02
12
12
2x8
$64.84
12
2 x 10 2 x 12
$40.80
12
2 x 10
$70.99
12
$43.46
12
2 x 12
$76.31
12
3x4
$47.47
12
3x4
$77.99
12
3x6
$51.30
12
3x6
$85.64
12
3x8
$57.80
12
3x8
$98.65
12
3 x 10
$64.19
6
3 x 10
$111.42
6
3 x 12
$71.87
6
3 x 12
$126.78
6
4x4
$61.24
12
4x4
$98.63
12
4x6
$65.43
6
4x6
$106.78
6
4x8
$78.78
6
4x8
$133.71
6
4 x 10
$88.72
4
4 x 10
$153.59
4
4 x 12
$96.38
4
4 x 12
$168.92
4
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
7
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
SWAGE NIPPLES SCH 40 SWAGE NIPPLES PIPE SIZE
PRICE
BOX QTY
SCH 80 SWAGE NIPPLES PIPE SIZE
PRICE
BOX QTY
2 x 1 TBE
$55.79
12
1 x 1⁄4 TBE
$33.83
12
2 x 11⁄4 TBE
$61.53
12
11⁄2 x 1 TBE
$42.73
12
2 x 11⁄2 TBE
$49.06
12
2 x 1⁄2 TBE
$76.56
12
21⁄2 x 2 TBE
$62.90
12
2 x 1 TBE
$62.79
12
3 x 1 TBE
$95.59
12
2 x 11⁄4 TBE
$65.96
12
3 x 2 TBE
$72.40
12
2 x 11⁄2 TBE
$62.79
12
4 x 2 TBE
$111.75
6
21⁄2 x 2 TBE
$76.75
12
4 x 3 TBE
$104.55
6
3 x 2 TBE
$88.73
6
2 x 1 GXT
$58.05
12
3 x 21⁄2 TBE
$88.73
12
2 x 11⁄2 GXT
$50.99
12
4 x 2 TBE
$142.72
6
21⁄2 x 2 GXT
$65.33
12
4 x 3 TBE
$132.08
6
3 x 1 GXT
$104.21
12
21⁄2 x 2 GBE
$82.99
12
3 x 11⁄4 GXT
$106.91
1
3 x 2 GBE
$95.91
12
3 x 2 GXT
$75.18
12
3 x 21⁄2 GBE
$95.91
12
4 x 2 GXT
$116.15
6
4 x 2 GBE
$154.61
6
4 x 3 GXT
$108.58
6
4 x 3 GBE
$142.90
6
21⁄2 x 2 TXG
$65.33
12
2 x 1 GXT
$65.40
12
3 x 2 TXG
$75.18
12
21⁄2 x 2 GXT
$79.87
12
4 x 2 TXG
$116.15
6
3 x 2 GXT
$92.32
12
4 x 3 TXG
$108.58
6
4 x 2 GXT
$148.66
6
21⁄2 x 2 GBE
$67.75
1
4 x 3 GXT
$137.49
6
3 x 2 GBE
$77.95
12
3 x 2 TXG
$92.32
12
4 x 2 GBE
$120.54
6
4 x 2 TXG
$148.66
6
4 x 3 GBE
$112.62
6
4 x 3 TXG
$137.49
6
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
8
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
SWAGE NIPPLES OIL COUNTRY–Large End Upset Reduced to Regular or Upset PRIMARY DESCRIPTION
price each
Box QTY
2¹∕₂ EUE 8RD x 2 EUE 8RD STD J55 SWAGE NIPPLE 2¹∕₂ EUE 8RD x 2 LP STD J55 SWAGE NIPPLE 2¹∕₂ UP 8RD x 2 GRV x 6 STD J55 SWAGE NIPPLE 3 UP 8RD x 2 UP 8RD STD J55 SWAGE NIPPLE 3 UP 8RD x 2LP STD J55 SWAGE NIPPLE 3 UP 8RD x 2¹∕₂ LP 8RD J55 SWAGE NIPPLE 3 UP 8RD x 2¹∕₂ LP STD J55 SWAGE NIPPLE 3 GRV x 2 UP 8RD STD J55 SWAGE NIPPLE 3 GRV x 2¹∕₂ UP 8RD STD J55 SWAGE NIPPLE 2¹∕₂ UP 8RD x 2 LP XH SWAGE NIPPLE
$227.09 $227.09 $144.33 $295.45 $295.45 $295.45 $295.45 $271.38 $211.33 $289.26
6 6 6 6 6 6 6 1 1 6
PRIMARY DESCRIPTION
price each
Box QTY
2 EUE 8RD BE x 6 STD J55 TUBING NIPPLE 2 EUE 8RD x 2 LP x 6 STD J55 TUBING NIPPLE 2UP 8RD x 2 GRV x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD BE x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂ GRV x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂ LP x 6 STD J55 TUBING NIPPLE 3UP 8RD x 3 8V x 6 STD J55 TUBING NIPPLE 3UP 8RD x 3 GRV x 6 STD J55 TUBING NIPPLE 2UP 8RD x 2 LP x 6 XH TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂ LP x 6 XH TUBING NIPPLE
$91.55 $91.55 $95.60 $138.14 $144.33 $138.14 $211.33 $221.05 $172.49 $261.83
12 12 12 6 6 6 6 1 12 6
PRIMARY DESCRIPTION
price each
Box QTY
2UP 8RD J55 API TUBING COUPLING 2¹∕₂UP 8RD J55 API TUBING COUPLING
POA POA
-
TUBING NIPPLES - STANDARD WEIGHT 18" and Shorter Upset and Non-Upset
API TUBING COUPLINGS 18" and Shorter Upset and Non-Upset
Additional Anvil products are available to be coated upon request. Revised:
July 2009
www.anvilintl.com
9
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
BULL PLUGS PRIMARY DESCRIPTION
price each
Box QTY
2 S40 RND CRBN STL BULL PLUG 3 S40 RND CRBN STL BULL PLUG 4 S40 RND CRBN STL BULL PLUG 2 S80 RND CRBN STL BULL PLUG 3 XH BULL PLUG 4 XH BULL PLUG
$38.61 $64.40 $92.00 $44.19 $85.12 $119.63
12 6 6 12 6 6
PRIMARY DESCRIPTION
price each
Box QTY
2 STD ¹∕₄ TAP CRBN STL BULL PLUG 2 STD ¹∕₂ TAP CRBN STL BULL PLUG 2 S80 ¹∕₄ TAP CRBN STL BULL PLUG 2 S80 ¹∕₂ TAP CRBN STL BULL PLUG
$43.23 $43.23 $48.19 $48.19
1 12 12 12
PRIMARY DESCRIPTION
price each
Box QTY
2UP 8RD STD BULL PLUG 2¹∕₂UP 8RD STD BULL PLUG
$109.04 $108.53
12 6
TAPPED BULL PLUGS
BULL PLUGS OIL COUNTRY
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
10
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
CATAWISSA HAMMER UNIONS FIG 100 HAMMER UNION Nominal pipe size
Price
Box QTY
2
$45.92
2¹/₂
$106.69
FIG 200 HAMMER UNION Nominal pipe size
Price
Box QTY
12
1
$35.33
36
8
2*
$45.81
14
3
$102.96
6
2¹/₂
$162.03
8
4
$150.35
2
3
$158.80
6
4
$188.00
4
*Ductile Iron
FIG 300 HAMMER UNION Nominal pipe size
Price
Box QTY
2*
$99.23
12
2¹/₂
$200.11
8
3
$261.52
6
*Ductile Iron
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
11
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
FITTINGS FOR GROOVED END PIPE CROSS, FIG. 7068
90° ELBOW, FIG. 7050 Nominal pipe size
Price
Box QTY
Nominal pipe size
2
$54.81
1
2
Price $133.94
Box QTY 1
3
$95.22
1
3
$237.94
1
4
$109.26
1
4
$391.16
1
REDUCING TEE, FIG. 7061
45° ELBOW, FIG. 7051 Nominal pipe size
Price
Box QTY
Nominal pipe size
Price
2
$54.81
1
3x3x2
$146.26
3
$95.22
1
4
$109.26
1
Price
Box QTY
2
$78.69
1
3
$11.94
1
4
$168.67
1
1
CONCENTRIC REDUCER (GR X GR), FIG. 7072
TEES, FIG. 7060 Nominal pipe size
Box QTY
CAPS, FIG. 7074
Nominal pipe size
Price
Box QTY
2¹/₂ x 2
$66.12
1
3x2
$62.36
1
4x2
$84.17
1
4x3
$99.10
1
CONCENTRIC REDUCER (GRV X THD), FIG. 7076
Nominal pipe size
Price
Box QTY
2
$47.34
1
Nominal pipe size
Price
Box QTY
2 – ¹/₂ TAP
$48.93
1
3x2
$83.26
1
3
$53.69
1
4
$63.86
1
6
$120.29
1
GROOVED END STRAINERS, FIG. 7260 Nominal pipe size
DI BODY WITH 316 SS TRIM, FIG. 7500 Nominal pipe size
WITH TWO POSition handle or with two position locking handle
2
$601.47
3
$1,852.88
4
$3,133.09
ipc Price
Box QTY
2
$896.67
1
3
$1,062.27
1
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
12
– Notes –
– Notes –
– Notes –
Corporate Offices
Anvil International Worldwide Customer Service Center
110 Corporate Drive, Suite 10 P.O. Box 3180 Portsmouth, NH 03802-3180
Tel: 708-885-3000 Fax: 708-534-5441
Tel: 603-422-8000 Fax: 603-422-8033 E-mail: [email protected]
U . S . Re gI O n Al S e Rv I C e C e n teRS northern Region
Southern Region
SeRviCing: Illinois, Indiana, Iowa, Kentucky, Michigan, Minnesota, Nebraska, North and South Dakota, Ohio, West Pennsylvania, West Virginia, Wisconsin
SeRviCing: Alabama, Arkansas, Kansas, Louisiana, Mississippi, Missouri, Oklahoma, Tennessee, Texas
Regional Distribution & Customer Service Center
Regional Distribution & Customer Service Center
1401 Valley View Lane, Suite 150 Irving, TX 75061
750 Central Avenue University Park, IL 60484
Tel: 972-343-9206 Fax: 972-641-8946 Toll Free: 1-800-451-4414
Tel: 708-885-3000 Fax: 708-534-5441 Toll Free: 1-800-301-2701
eastern Region
Western Region
SeRviCing: Connecticut, Delaware, Florida, Georgia, Maine, Maryland, Massachusetts, New Hampshire, New Jersey, New York, North and South Carolina, East Pennsylvania, Rhode Island, Vermont, Virginia
SeRviCing: Alaska, Arizona, California, Colorado, Hawaii, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, Wyoming
Regional Distribution Center
800 Malleable Road Columbia, PA 17512
Regional Distribution Center
1385 Greg Street Sparks, NV 89431
CAnAdA SeRvICe CenteR Anvil International Canada Customer Service Center 390 Second Avenue P.O. Box 40 Simcoe, Ontario N3Y 4K9
InteRnAtIOnAl SAleS europe and Middle east Region Rick van Meesen, Sales Director [email protected]
Abraham Quijada, Sales Manager
Tormentil 15 7483 BR Haaksbergen The Netherlands
Tel: 519-426-4551 Fax: 519-426-5509
Mexico, Puerto Rico and latin America Tel: +1-281-590-4600 U.S. Customer Service Tel: +1-708-885-3000 Fax: +1-708-534-5441
Tel: +31-53-5725570 Fax: +31-53-5725579 U.S. Customer Service Tel: +1-708-885-3000 Fax: +1-708-534-5441 b u i l d i n g
c o n n e c t i o n s
www.anvilintl.com
#756 / Printed in USA / 11.06 / ©2009 Revisions: 2 July 6, 2009
t h a t
l a s t
Price Sheet IPC-3.09 | Effective: March 23, 2009 | Cancels Price Sheet IPC-10.08 of October 13, 2008
FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • Upc numbers and SPIN commodity identification numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s Web site at www.anvilintl.com. • Pricing is subject to change without notice. Go to Anvil’s Web site for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. REVISIONS July 6, 2009: Page 9 – API Tubing Couplings
LIST = POA
EasterN Region
80 0 -301-2701
Northern Region
80 0 -301-2701
Southern Region
80 0 - 451- 4 414
www.anvilintl.com
western Region
80 0 - 451- 4 414
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
6. SHIPMENTS:
1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.
2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.
3. WARRANTY: Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.
5. RETURNS: Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.
Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.
7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.
8. PRICES AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated.
9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.
10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to self-insure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.
11. MINIMUM INVOICE: Domestic: $100 plus transportation. International: $500 plus transportation.
12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.
4. SELLER’S LIABILITY:
Revised:
All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment.
NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments (weighing less than 2,500 pounds) will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments.
www.anvilintl.com
2
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
TABLE OF CONTENTS ANVIL IPC COATED PRODUCTS Malleable Iron and Cast Iron Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Forged Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Steel Pipe Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Swage Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 JB Smith Swages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 JB Smith Tubing Nipples – Standard Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 JB Smith API Tubing Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 JB Smith Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 JB Smith Tapped Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 JB Smith Bull Plugs Oil Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Catawissa Hammer Unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Fittings for Grooved End Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revised:
www.anvilintl.com
3
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
MALLEABLE IRON AND CAST IRON FITTINGS 90° ELBOW
XH API REC T/T COUPLING
Nominal pipe size
Price
Box QTY
Nominal pipe size
Price
Box QTY
1⁄2
$12.25
50
1
$14.35
25
3⁄4
$12.59
35
2
$19.76
15
1
$14.04
20
21⁄2
$28.05
1
2
$23.43
10
3
$33.10
1
21⁄2
$43.01
5
4
$49.36
1
3
$58.75
4
4
$113.60
5
UNIONS
TEE Nominal pipe size
Price
Box QTY
1⁄2
$12.80
40
3⁄4
$13.75
20
1
$15.98
12
2
$29.06
10
21⁄2
$54.22
4
3
$75.54
3
4
$165.42
4
Price
Box QTY
1⁄2
$13.31
75
3⁄4
$13.95
40
1
$14.82
25
2
$24.53
6
21⁄2
$54.73
5
3
$69.27
4
4
$126.41
4
Nominal pipe size
Price
Box QTY
150
1
$21.44
15
300
1
$30.65
10
MI HEX BUSHINGS
45° ELBOW Nominal pipe size
UNION
Nominal pipe size
Price
Box QTY
2 x ¹/₄
$17.33
15
2 x 1¹/₂
$16.43
20
CAST IRON HEX BUSHING
BLACK RH COUPLINGS
Nominal pipe size
Price
Box QTY
2 x 1⁄2
$18.14
15
2 x 3⁄4
$16.57
15
2x1
$16.30
15
3x2
$21.18
1
4x2
$34.45
20
4x3
$34.45
1
Nominal pipe size
Price
Box QTY
¹/₂
$12.85
20
³/₄
$13.25
60
1
$14.53
25
2
$20.83
5
3
$55.12
4
Nominal pipe size
Price
Box QTY
4
$100.69
4
3
$21.96
1
CAST IRON CORED SQUARE HEAD PLUG
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
4
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
FORGED STEEL 2000 FS THREADED 90° ELBOW Nominal pipe size
Price
Box QTY
1⁄2
$16.75
25
1
$19.23
2
$39.44
21⁄2 3 4
$408.00
1
3000 FS THREADED COUPLING Nominal pipe size
Price
Box QTY
1
$16.76
25
25
2
$27.13
10
5
21⁄2
$54.97
5
$90.33
1
3
$94.24
1
$134.12
1
4
$168.80
1
2000 FS THREADED TEE Nominal pipe size
Price
Box QTY
1⁄2
$18.04
25
1
$24.60
25
2
$48.05
5
21⁄2
$109.37
1
3
$180.56
1
4
$429.55
1
3000 FS HEX UNION
Price
Box QTY
1
$22.30
25
2
$46.89
5
21⁄2
$111.46
1
3
$173.60
1
4
$417.80
1
Price
Box QTY
1
$29.02
10
FS HEX BUSHING
2000 FS THREADED 45° ELBOW Nominal pipe size
Nominal pipe size
Nominal pipe size
Price
1⁄2
$12.61
100
1
$14.61
50
2
$21.88
12
3
$71.59
12
4
$142.21
5
Box QTY
2000 FS THREADED CROSS Nominal pipe size
Price
Box QTY
2
$104.04
5
3
$410.08
1
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
5
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
STEEL PIPE NIPPLES SCH 40 WELDED NIPPLES
SCH 80 SEAMLESS NIPPLES
PIPE SIZE
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
1⁄4 x 2
$11.96
25
1⁄4 x CLOSE
$15.08
25
21⁄2 x 6
$48.22
10
1⁄4 x 3
$12.35
25
1⁄4 x 2
$15.67
25
21⁄2 x 8
$54.86
5
1⁄4 x 4
$12.62
25
1⁄4 x 3
$16.74
25
21⁄2 x 10
$61.48
5
1⁄2 x 2
$11.71
25
1⁄4 x 4
$18.15
25
21⁄2 x 12
$67.88
5
1⁄2 x 3
$11.91
25
1⁄2 x CLOSE
$13.08
25
3 x CLOSE
$46.50
10
1⁄2 x 4
$12.17
25
1⁄2 x 11⁄2
$13.49
25
3x3
$51.33
20
1⁄2 x 6
$12.65
25
1⁄2 x 2
$13.49
25
3x4
$52.29
10
3⁄4 x 2
$11.96
25
1⁄2 x 3
$14.12
25
3x6
$60.80
10
3⁄4 x 3
$12.14
25
1⁄2 x 4
$14.99
25
3x8
$70.98
5
3⁄4 x 4
$12.50
25
1⁄2 x 6
$17.14
25
3 x 10
$79.67
5
1 x CLOSE
$12.43
25
1⁄2 x 8
$20.50
25
3 x 12
$87.51
5
1x2
$12.61
25
1⁄2 x 10
$21.99
25
4 x CLOSE
$65.92
1
1x3
$12.72
25
1⁄2 x 12
$23.50
25
4x4
$71.48
5
1x4
$13.23
25
3⁄4 x 2
$13.72
25
4x6
$83.39
5
1x6
$14.29
25
3⁄4 x 3
$14.53
25
4x8
$96.41
2
1x8
$16.61
25
3⁄4 x 4
$15.51
25
4 x 10
$108.09
2
4 x 12
$119.94
2
1 x 10
$17.63
25
1 x CLOSE
$14.54
25
1 x 12
$18.66
25
1x2
$14.78
25
2 x CLOSE
$14.53
25
1x3
$15.83
25
2x3
$15.11
25
1x4
$17.08
25
2x4
$16.04
25
1x6
$19.91
25
2x5
$16.88
25
1x8
$25.32
25
2x6
$17.94
25
1 x 10
$27.47
25
2x7
$22.91
10
1 x 12
$29.99
25
2x8
$22.90
10
2 x CLOSE
$17.66
25
2 x 10
$25.06
10
2 x 21⁄2
$18.52
25
2 x 12
$27.25
10
2x3
$19.81
25
2 x 24
$115.99
1
2x4
$21.66
25
2 x 36
$153.85
1
2x5
$24.57
25
3 x CLOSE
$31.50
10
2x6
$26.55
15
3x3
$32.77
10
2x7
$33.67
10
3x4
$35.69
10
2x8
$35.77
10
3x6
$39.40
10
2x9
$37.84
10
3x8
$47.25
5
2 x 10
$39.91
10
3 x 10
$50.99
5
2 x 11
$42.01
10
3 x 12
$54.71
5
2 x 12
$44.08
10
4 x CLOSE
$45.75
5
2 x 24
$119.68
1
4x4
$49.19
5
2 x 36
$165.65
1
4x6
$54.79
5
21⁄2 x CLOSE
$37.88
10
4x8
$59.57
2
21⁄2 x 4
$41.85
15
4 x 10
$64.53
2
4 x 12
$71.54
2
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
6
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
ADAPTER NIPPLES – GROOVED AND GROOVED BY THREAD SCH 40 ADAPTER NIPPLES PIPE SIZE
SCH 80 ADAPTER NIPPLES
PRICE
BOX QTY
PIPE SIZE
PRICE
BOX QTY
2x3
$30.85
12
2x4
$30.85
12
2x3
$51.08
12
2x4
$51.08
12
2x6
$34.32
2x8
$37.73
12
2x6
$58.02
12
12
2x8
$64.84
12
2 x 10 2 x 12
$40.80
12
2 x 10
$70.99
12
$43.46
12
2 x 12
$76.31
12
3x4
$47.47
12
3x4
$77.99
12
3x6
$51.30
12
3x6
$85.64
12
3x8
$57.80
12
3x8
$98.65
12
3 x 10
$64.19
6
3 x 10
$111.42
6
3 x 12
$71.87
6
3 x 12
$126.78
6
4x4
$61.24
12
4x4
$98.63
12
4x6
$65.43
6
4x6
$106.78
6
4x8
$78.78
6
4x8
$133.71
6
4 x 10
$88.72
4
4 x 10
$153.59
4
4 x 12
$96.38
4
4 x 12
$168.92
4
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
7
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
SWAGE NIPPLES SCH 40 SWAGE NIPPLES PIPE SIZE
PRICE
BOX QTY
SCH 80 SWAGE NIPPLES PIPE SIZE
PRICE
BOX QTY
2 x 1 TBE
$55.79
12
1 x 1⁄4 TBE
$33.83
12
2 x 11⁄4 TBE
$61.53
12
11⁄2 x 1 TBE
$42.73
12
2 x 11⁄2 TBE
$49.06
12
2 x 1⁄2 TBE
$76.56
12
21⁄2 x 2 TBE
$62.90
12
2 x 1 TBE
$62.79
12
3 x 1 TBE
$95.59
12
2 x 11⁄4 TBE
$65.96
12
3 x 2 TBE
$72.40
12
2 x 11⁄2 TBE
$62.79
12
4 x 2 TBE
$111.75
6
21⁄2 x 2 TBE
$76.75
12
4 x 3 TBE
$104.55
6
3 x 2 TBE
$88.73
6
2 x 1 GXT
$58.05
12
3 x 21⁄2 TBE
$88.73
12
2 x 11⁄2 GXT
$50.99
12
4 x 2 TBE
$142.72
6
21⁄2 x 2 GXT
$65.33
12
4 x 3 TBE
$132.08
6
3 x 1 GXT
$104.21
12
21⁄2 x 2 GBE
$82.99
12
3 x 11⁄4 GXT
$106.91
1
3 x 2 GBE
$95.91
12
3 x 2 GXT
$75.18
12
3 x 21⁄2 GBE
$95.91
12
4 x 2 GXT
$116.15
6
4 x 2 GBE
$154.61
6
4 x 3 GXT
$108.58
6
4 x 3 GBE
$142.90
6
21⁄2 x 2 TXG
$65.33
12
2 x 1 GXT
$65.40
12
3 x 2 TXG
$75.18
12
21⁄2 x 2 GXT
$79.87
12
4 x 2 TXG
$116.15
6
3 x 2 GXT
$92.32
12
4 x 3 TXG
$108.58
6
4 x 2 GXT
$148.66
6
21⁄2 x 2 GBE
$67.75
1
4 x 3 GXT
$137.49
6
3 x 2 GBE
$77.95
12
3 x 2 TXG
$92.32
12
4 x 2 GBE
$120.54
6
4 x 2 TXG
$148.66
6
4 x 3 GBE
$112.62
6
4 x 3 TXG
$137.49
6
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
8
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
SWAGE NIPPLES OIL COUNTRY–Large End Upset Reduced to Regular or Upset PRIMARY DESCRIPTION
price each
Box QTY
2¹∕₂ EUE 8RD x 2 EUE 8RD STD J55 SWAGE NIPPLE 2¹∕₂ EUE 8RD x 2 LP STD J55 SWAGE NIPPLE 2¹∕₂ UP 8RD x 2 GRV x 6 STD J55 SWAGE NIPPLE 3 UP 8RD x 2 UP 8RD STD J55 SWAGE NIPPLE 3 UP 8RD x 2LP STD J55 SWAGE NIPPLE 3 UP 8RD x 2¹∕₂ LP 8RD J55 SWAGE NIPPLE 3 UP 8RD x 2¹∕₂ LP STD J55 SWAGE NIPPLE 3 GRV x 2 UP 8RD STD J55 SWAGE NIPPLE 3 GRV x 2¹∕₂ UP 8RD STD J55 SWAGE NIPPLE 2¹∕₂ UP 8RD x 2 LP XH SWAGE NIPPLE
$227.09 $227.09 $144.33 $295.45 $295.45 $295.45 $295.45 $271.38 $211.33 $289.26
6 6 6 6 6 6 6 1 1 6
PRIMARY DESCRIPTION
price each
Box QTY
2 EUE 8RD BE x 6 STD J55 TUBING NIPPLE 2 EUE 8RD x 2 LP x 6 STD J55 TUBING NIPPLE 2UP 8RD x 2 GRV x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD BE x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂ GRV x 6 STD J55 TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂ LP x 6 STD J55 TUBING NIPPLE 3UP 8RD x 3 8V x 6 STD J55 TUBING NIPPLE 3UP 8RD x 3 GRV x 6 STD J55 TUBING NIPPLE 2UP 8RD x 2 LP x 6 XH TUBING NIPPLE 2¹∕₂UP 8RD x 2¹∕₂ LP x 6 XH TUBING NIPPLE
$91.55 $91.55 $95.60 $138.14 $144.33 $138.14 $211.33 $221.05 $172.49 $261.83
12 12 12 6 6 6 6 1 12 6
PRIMARY DESCRIPTION
price each
Box QTY
2UP 8RD J55 API TUBING COUPLING 2¹∕₂UP 8RD J55 API TUBING COUPLING
POA POA
-
TUBING NIPPLES - STANDARD WEIGHT 18" and Shorter Upset and Non-Upset
API TUBING COUPLINGS 18" and Shorter Upset and Non-Upset
Additional Anvil products are available to be coated upon request. Revised:
July 2009
www.anvilintl.com
9
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
BULL PLUGS PRIMARY DESCRIPTION
price each
Box QTY
2 S40 RND CRBN STL BULL PLUG 3 S40 RND CRBN STL BULL PLUG 4 S40 RND CRBN STL BULL PLUG 2 S80 RND CRBN STL BULL PLUG 3 XH BULL PLUG 4 XH BULL PLUG
$38.61 $64.40 $92.00 $44.19 $85.12 $119.63
12 6 6 12 6 6
PRIMARY DESCRIPTION
price each
Box QTY
2 STD ¹∕₄ TAP CRBN STL BULL PLUG 2 STD ¹∕₂ TAP CRBN STL BULL PLUG 2 S80 ¹∕₄ TAP CRBN STL BULL PLUG 2 S80 ¹∕₂ TAP CRBN STL BULL PLUG
$43.23 $43.23 $48.19 $48.19
1 12 12 12
PRIMARY DESCRIPTION
price each
Box QTY
2UP 8RD STD BULL PLUG 2¹∕₂UP 8RD STD BULL PLUG
$109.04 $108.53
12 6
TAPPED BULL PLUGS
BULL PLUGS OIL COUNTRY
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
10
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
CATAWISSA HAMMER UNIONS FIG 100 HAMMER UNION Nominal pipe size
Price
Box QTY
2
$45.92
2¹/₂
$106.69
FIG 200 HAMMER UNION Nominal pipe size
Price
Box QTY
12
1
$35.33
36
8
2*
$45.81
14
3
$102.96
6
2¹/₂
$162.03
8
4
$150.35
2
3
$158.80
6
4
$188.00
4
*Ductile Iron
FIG 300 HAMMER UNION Nominal pipe size
Price
Box QTY
2*
$99.23
12
2¹/₂
$200.11
8
3
$261.52
6
*Ductile Iron
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
11
Anvil IPC Coated Products PriceList Effective: March 23, 2009 | Replaces Prior Date: October 2008 | Price Sheet IPC-3.09
FITTINGS FOR GROOVED END PIPE CROSS, FIG. 7068
90° ELBOW, FIG. 7050 Nominal pipe size
Price
Box QTY
Nominal pipe size
2
$54.81
1
2
Price $133.94
Box QTY 1
3
$95.22
1
3
$237.94
1
4
$109.26
1
4
$391.16
1
REDUCING TEE, FIG. 7061
45° ELBOW, FIG. 7051 Nominal pipe size
Price
Box QTY
Nominal pipe size
Price
2
$54.81
1
3x3x2
$146.26
3
$95.22
1
4
$109.26
1
Price
Box QTY
2
$78.69
1
3
$11.94
1
4
$168.67
1
1
CONCENTRIC REDUCER (GR X GR), FIG. 7072
TEES, FIG. 7060 Nominal pipe size
Box QTY
CAPS, FIG. 7074
Nominal pipe size
Price
Box QTY
2¹/₂ x 2
$66.12
1
3x2
$62.36
1
4x2
$84.17
1
4x3
$99.10
1
CONCENTRIC REDUCER (GRV X THD), FIG. 7076
Nominal pipe size
Price
Box QTY
2
$47.34
1
Nominal pipe size
Price
Box QTY
2 – ¹/₂ TAP
$48.93
1
3x2
$83.26
1
3
$53.69
1
4
$63.86
1
6
$120.29
1
GROOVED END STRAINERS, FIG. 7260 Nominal pipe size
DI BODY WITH 316 SS TRIM, FIG. 7500 Nominal pipe size
WITH TWO POSition handle or with two position locking handle
2
$601.47
3
$1,852.88
4
$3,133.09
ipc Price
Box QTY
2
$896.67
1
3
$1,062.27
1
Additional Anvil products are available to be coated upon request. Revised:
www.anvilintl.com
12
– Notes –
– Notes –
– Notes –
Corporate Offices
Anvil International Worldwide Customer Service Center
110 Corporate Drive, Suite 10 P.O. Box 3180 Portsmouth, NH 03802-3180
Tel: 708-885-3000 Fax: 708-534-5441
Tel: 603-422-8000 Fax: 603-422-8033 E-mail: [email protected]
U . S . Re gI O n Al S e Rv I C e C e n teRS northern Region
Southern Region
SeRviCing: Illinois, Indiana, Iowa, Kentucky, Michigan, Minnesota, Nebraska, North and South Dakota, Ohio, West Pennsylvania, West Virginia, Wisconsin
SeRviCing: Alabama, Arkansas, Kansas, Louisiana, Mississippi, Missouri, Oklahoma, Tennessee, Texas
Regional Distribution & Customer Service Center
Regional Distribution & Customer Service Center
1401 Valley View Lane, Suite 150 Irving, TX 75061
750 Central Avenue University Park, IL 60484
Tel: 972-343-9206 Fax: 972-641-8946 Toll Free: 1-800-451-4414
Tel: 708-885-3000 Fax: 708-534-5441 Toll Free: 1-800-301-2701
eastern Region
Western Region
SeRviCing: Connecticut, Delaware, Florida, Georgia, Maine, Maryland, Massachusetts, New Hampshire, New Jersey, New York, North and South Carolina, East Pennsylvania, Rhode Island, Vermont, Virginia
SeRviCing: Alaska, Arizona, California, Colorado, Hawaii, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, Wyoming
Regional Distribution Center
800 Malleable Road Columbia, PA 17512
Regional Distribution Center
1385 Greg Street Sparks, NV 89431
CAnAdA SeRvICe CenteR Anvil International Canada Customer Service Center 390 Second Avenue P.O. Box 40 Simcoe, Ontario N3Y 4K9
InteRnAtIOnAl SAleS europe and Middle east Region Rick van Meesen, Sales Director [email protected]
Abraham Quijada, Sales Manager
Tormentil 15 7483 BR Haaksbergen The Netherlands
Tel: 519-426-4551 Fax: 519-426-5509
Mexico, Puerto Rico and latin America Tel: +1-281-590-4600 U.S. Customer Service Tel: +1-708-885-3000 Fax: +1-708-534-5441
Tel: +31-53-5725570 Fax: +31-53-5725579 U.S. Customer Service Tel: +1-708-885-3000 Fax: +1-708-534-5441 b u i l d i n g
c o n n e c t i o n s
www.anvilintl.com
#756 / Printed in USA / 11.06 / ©2009 Revisions: 2 July 6, 2009
t h a t
l a s t
