• all aluminum tube walls and ceiling • aluminum exterior fenders • 2000# zinc front wind jack • 24” o/c wall, floor & roof supports • 4 or 7-way plug • 2” or 2 5/16th” coupler • bias tire on grey mod wheel
• spring axle(s), STD lube, no brakes
• removable ramp door with plank decking • (4) tie downs • spring loaded gate latches • LED exterior lights
• bias tire on grey mod wheel
• spring or torsion axle(s)
INTERIOR
EXTERIOR
• all tube construction (steel or aluminum) • aluminum exterior fenders • 5000# zinc top wind jack • 24” o/c floor crossmembers • 16” o/c wall supports • 16” o/c roof crossmembers - 1” x 2” • 4 or 7-way plug • 2” or 2 5/16th” coupler
• 3/4” AdvanTech subfloor • 3/8” plywood walls or 3.6mm luan walls • open stud ceiling • roof vent • dome light with integrated switch, 12v
EXTERIOR
• .030 aluminum skin • 3” lower rub rail trim • 3” upper rub rail trim • one piece aluminum roof • 24” ATP stoneguard with j-rail • LED clearance & brake lights • screws on seams & trim • double rear cargo doors • 32” door - 100 series - flush lock • color matched front corners
INTERIOR
• 3/4” AdvanTech subfloor • 3/8” plywood walls • open stud ceiling • dome light(s) with wall switch 12v
EXTERIOR
• .030 aluminum skin • 3” lower rub rail trim • 3” upper rub rail trim • one piece aluminum roof • 24” ATP stoneguard with J-rail • LED clearance & brake lights • rivets on seams and trim • double rear cargo doors • 32” door - 405 series - flush lock • color matched front corners