Autumn Leaves Burlap Runner full sheet
Autumn Leaves Burlap Runner Designed by Wendy Prather of our Northgate store Supplies: 20 inches by 60 inches of burlap 4 yards of ½ inch wide ribbon 3 cotton fat quarters 1 ½ yards Ultra Heat-n-Bond
Pull one strand the full width of the burlap to straighten out both sides. Mark the burlap 2 inches from the edges all the way around. Sew the ribbon onto the burlap, following the marks. Iron the fat quarters onto the Heat-n-Bond. Trace a leaf pattern onto the Heat-n-Bond. You will need 4 leaves of each color. Cut them out, and peel the paper off the back. Arrange the leaves in a serpentine down the length of the runner, over-lapping them as you go. Press the leaves onto the burlap, making sure they are adhered well. Enjoy!
www.pacificfabrics.com
Pull one strand the full width of the burlap to straighten out both sides. Mark the burlap 2 inches from the edges all the way around. Sew the ribbon onto the burlap, following the marks. Iron the fat quarters onto the Heat-n-Bond. Trace a leaf pattern onto the Heat-n-Bond. You will need 4 leaves of each color. Cut them out, and peel the paper off the back. Arrange the leaves in a serpentine down the length of the runner, over-lapping them as you go. Press the leaves onto the burlap, making sure they are adhered well. Enjoy!
www.pacificfabrics.com
