B306 Pairing - UK Electrical Supplies
These helpful instructions will guide you through the advanced steps to get your Byron door chime ready for use. Please follow the steps below:
1. PLEASE NOTE: The battery for the bell push is pre installed and ready 2. 3.
4. 5.
for use. Plug in the door chime, switch on and the unit will ring. On the front of the door chime unit there are two buttons, using a pointed object please HOLD down the Learn button see picture for 10 seconds, the unit will ring within this time and you can now release the button (if the unit did not ring please follow step 1). Now press the Learn button again once for two seconds and release. The chime will ring. The bell push will not operate very close to the door chime, please hold the bell push in your hand at arm’s length away from the chime and press the bell push. The door chime unit will now ring to confirm pairing.
Well Done! The unit is now ready for use. Enjoy your Byron product.
Oops this did not work? In the unlikely event that this did not work for you please follow the advanced steps below:
6. Now press the Learn button this time for two seconds and release. The chime will ring. 7. Please hold the bell push in your hand at arm’s length away from the chime and press the bell push. If the unit did not ring please continue below. 8. Now press the Learn button this time for two seconds and release. The chime will ring 9. Please hold the bell push in your hand at arm’s length away from the chime and press the bell push. If the unit did not ring please continue below. 10. Now press the Learn button this time for two seconds and release. The chime will ring 11. Please hold the bell push in your hand at arm’s length away from the chime and press the bell push. If the unit did not ring please continue below.
Am I unlucky? We do apologise if this has not worked. At this point you will have to contact our helpdesk team who will proceed further to get the issue resolved. You can contact them by: Telephone - 0845 230 1231 Support - http://www.chbyron.eu/ContactByron/ Post Byron House 34, Sherwood Rd Aston Fields Bromsgrove B60 3DR
1. PLEASE NOTE: The battery for the bell push is pre installed and ready 2. 3.
4. 5.
for use. Plug in the door chime, switch on and the unit will ring. On the front of the door chime unit there are two buttons, using a pointed object please HOLD down the Learn button see picture for 10 seconds, the unit will ring within this time and you can now release the button (if the unit did not ring please follow step 1). Now press the Learn button again once for two seconds and release. The chime will ring. The bell push will not operate very close to the door chime, please hold the bell push in your hand at arm’s length away from the chime and press the bell push. The door chime unit will now ring to confirm pairing.
Well Done! The unit is now ready for use. Enjoy your Byron product.
Oops this did not work? In the unlikely event that this did not work for you please follow the advanced steps below:
6. Now press the Learn button this time for two seconds and release. The chime will ring. 7. Please hold the bell push in your hand at arm’s length away from the chime and press the bell push. If the unit did not ring please continue below. 8. Now press the Learn button this time for two seconds and release. The chime will ring 9. Please hold the bell push in your hand at arm’s length away from the chime and press the bell push. If the unit did not ring please continue below. 10. Now press the Learn button this time for two seconds and release. The chime will ring 11. Please hold the bell push in your hand at arm’s length away from the chime and press the bell push. If the unit did not ring please continue below.
Am I unlucky? We do apologise if this has not worked. At this point you will have to contact our helpdesk team who will proceed further to get the issue resolved. You can contact them by: Telephone - 0845 230 1231 Support - http://www.chbyron.eu/ContactByron/ Post Byron House 34, Sherwood Rd Aston Fields Bromsgrove B60 3DR
