Backpack - Rain POS
Backpack Finished Size: 15" x 16"
Supplies Needed • ½ yd. Little Dress Boutique™ Scottie Dog • Black 5⁄8" grosgrain ribbon: 3 1⁄3 yds. (straps) • Safety pin • Rotary cutter, acrylic ruler & mat
• Basic sewing supplies • Sewing machine • Iron & pressing surface
Directions Read all instructions before beginning project. Do not pre-wash fabrics. Use a ½" seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Backstitch at the beginning and end of each seam to secure stitching. Before cutting, press fabrics with a dry iron on cotton setting. Finish seam allowances with zigzag or serge stitching, or pinking shears.
Cutting: Scottie Dog: 2 – 17" x 17" squares Ribbon: 2 – 5⁄8" x 60" lengths
17" x 17" 17" x 17"
Scottie Dog: 18" x 42" Ribbon: 60" x 5/8"
Sewing: 1. Serge, zigzag or pink all edges of front and back to finish seams. 2. To finish the ends of the casing for both pieces, make a clip ½" into the sides, 2 ¼" from the top. Fold the sides of the 2 ¼" section to the wrong side ¼" twice and sew on the inside fold (Dia.
Dia. A 2 ¼"
2 ¼"
½"
wrong side (WS) (both pieces)
Cut ½" slit on each side
½"
½"
Fold and sew
Fold and sew WS (both pieces)
A).
Dia. E
3. To make the casing, press the top edge to the wrong side ¼" and again 1". Sew on the Dia. B Fold ¼"
Fold ¼" Sew 1"
Foldline
WS (both pieces)
Casing
1"
WS (both pieces)
inside fold to make the 1" casing (Dia. B). 4. Place front and back pieces RST matching edges and corners. Pin and sew the sides and bottom, leaving a 1" opening on the sides, 1" Dia. C Sew
½" seam allowance
WS (both pieces RST) 1" opening for end of straps
1"
Pin ends securely in place. (Dia. E). 7. Sew the 1" opening closed to secure the strap. Trim ends even with edges. Repeat Steps 5-7 for the second strap going in the Dia. F Repeat Steps 5 - 7 for the second strap going in the opposite direction.
1"
from the bottom (Dia. C).
Sew to secure straps & trim
5. Attach the safety pin to the end of one ribbon strap; feed through one casing, then back Dia. D Casing
opposite direction (Dia. F).
Finishing: through the second casing (Dia. D). 6. Pull the ribbon to make the ends even. Thread the ribbon ends through the back pack and out the 1" opening on the side, at the bottom edge.
8. Turn backpack right side out. Place items in back pack and pull on ribbon straps to close top. Insert arms through straps with backpack on child’s back.
Finished Care Instructions: Wash in cool water; hang or lay flat to dry. Press to remove wrinkles, if needed.
©2015 Fabric Editions, Inc. Little Dress Boutique™ is a trademark of Fabric Editions, Inc.
Supplies Needed • ½ yd. Little Dress Boutique™ Scottie Dog • Black 5⁄8" grosgrain ribbon: 3 1⁄3 yds. (straps) • Safety pin • Rotary cutter, acrylic ruler & mat
• Basic sewing supplies • Sewing machine • Iron & pressing surface
Directions Read all instructions before beginning project. Do not pre-wash fabrics. Use a ½" seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Backstitch at the beginning and end of each seam to secure stitching. Before cutting, press fabrics with a dry iron on cotton setting. Finish seam allowances with zigzag or serge stitching, or pinking shears.
Cutting: Scottie Dog: 2 – 17" x 17" squares Ribbon: 2 – 5⁄8" x 60" lengths
17" x 17" 17" x 17"
Scottie Dog: 18" x 42" Ribbon: 60" x 5/8"
Sewing: 1. Serge, zigzag or pink all edges of front and back to finish seams. 2. To finish the ends of the casing for both pieces, make a clip ½" into the sides, 2 ¼" from the top. Fold the sides of the 2 ¼" section to the wrong side ¼" twice and sew on the inside fold (Dia.
Dia. A 2 ¼"
2 ¼"
½"
wrong side (WS) (both pieces)
Cut ½" slit on each side
½"
½"
Fold and sew
Fold and sew WS (both pieces)
A).
Dia. E
3. To make the casing, press the top edge to the wrong side ¼" and again 1". Sew on the Dia. B Fold ¼"
Fold ¼" Sew 1"
Foldline
WS (both pieces)
Casing
1"
WS (both pieces)
inside fold to make the 1" casing (Dia. B). 4. Place front and back pieces RST matching edges and corners. Pin and sew the sides and bottom, leaving a 1" opening on the sides, 1" Dia. C Sew
½" seam allowance
WS (both pieces RST) 1" opening for end of straps
1"
Pin ends securely in place. (Dia. E). 7. Sew the 1" opening closed to secure the strap. Trim ends even with edges. Repeat Steps 5-7 for the second strap going in the Dia. F Repeat Steps 5 - 7 for the second strap going in the opposite direction.
1"
from the bottom (Dia. C).
Sew to secure straps & trim
5. Attach the safety pin to the end of one ribbon strap; feed through one casing, then back Dia. D Casing
opposite direction (Dia. F).
Finishing: through the second casing (Dia. D). 6. Pull the ribbon to make the ends even. Thread the ribbon ends through the back pack and out the 1" opening on the side, at the bottom edge.
8. Turn backpack right side out. Place items in back pack and pull on ribbon straps to close top. Insert arms through straps with backpack on child’s back.
Finished Care Instructions: Wash in cool water; hang or lay flat to dry. Press to remove wrinkles, if needed.
©2015 Fabric Editions, Inc. Little Dress Boutique™ is a trademark of Fabric Editions, Inc.
