Baker Hughes FracFit Fracturing Optimization Solution
UPSTREAM
Dynamus Extended-Life Drill Bit
Give your horsepower the bit it deserves.
bhge.com
You’re demanding more from your drilling equipment than ever before, with WOB, torque, and motor life seriously changing how tough your BHA has to be—and how long it has to last.
Most often, it’s the bit that fails first.
But what if you had a bit as tough as you needed? If your bit could perform in the harshest conditions and toughest parameters, you could be: • Drilling one-run, one-BHA intervals • Underspending your AFE • Avoiding unplanned trips • Eliminating after-hours surprises • Setting new benchmarks
It’s not hypothetical. It’s now reality.
2
The Dynamus™ extended-life drill bit survives and thrives where others fail. And because the Dynamus bit smooths out lateral vibrations, it prevents the damage that shortens the life of other BHA components.
Dynamus Extended-life drill bit
3
STABLE Dynamus bits incorporate StayTrue™ elements to mitigate the lateral vibrations that reduce wellbore quality
LATERAL VIBRATION COMPARISON Dynamus bit with StayTrue elements
70%
PDC bit without StayTrue elements
28% 0%
20%
40%
60%
80%
SMOOTH DRILLING
SMOOTH DRILLING
100%
Percentage of rotating hours per drilling dysfunction Smooth drilling
Moderate dynamics
High dynamics
Severe dynamics
4
TOUGH Dynamus bits use StayCool™ 2.0 cutter technology to resist wear by lowering the operating temperature of the diamond cutter
Temperature (º F)
600
CUTTING TIP TEMPERATURE
500 400 300 200 100 0
Time Standard Planar Cutter
StayCool 2.0 Cutter
5
GREAT NEW BODY Dynamus bits use enhanced, high-strength materials that resist damage, providing the most durable frame we’ve ever built.
• Tougher raw materials • Empirically calibrated Finite Element Analysis (FEA) routines • Optimized thermal control during manufacturing
6
CASE HISTORY: MIDLAND BASIN
Dynamus extended-life drill bit with StayTrue technology breaks lease records ELIMINATED
ADDITIONAL
INCREASED
“This is the best dull I’ve ever pulled in 12 ¼ in.”
BIT TRIPS 32%
1 RUN
SECTION
IN RUN
INTERVAL’S FASTEST AND
L O N G E S T
7000
Dynamus Performance Compared to Average Offset
6000
Footage (ft)
DELIVERED
- Midland Basin Customer
90 80
5000 4000
70
3000
60
2000
ROP (ft/hr)
COMPLETED
ROP BY
50
1000 0
40
Dynamus Footage
Offset Average ROP
7
Stop tripping. Keep drilling. Own the rock, and get the bit your horsepower deserves. Drilling one-run intervals, reducing your costs, eliminating surprises... You could be doing all that and more today, with a bit designed to survive and thrive in the harshest operations.
Contact your BHGE representative or visit BHGE.com/Dynamus for more information on how you can harness your horsepower. Or if you’d rather have us contact you, please click here.
For more information: bhge.com Baker Hughes, a GE company, LLC and its affiliates (“BHGE”) provides this information on an “as is” basis for general information purposes and believes it to be accurate as of the date of publication. BHGE does not make any representation as to the accuracy or completeness of the information and makes no warranties of any kind, specific, implied or oral, to the fullest extent permissible by law, including those of merchantability and fitness for a particular purpose or use. BHGE hereby disclaims any and all liability for any direct, indirect, consequential or special damages, claims for lost profits, or third party claims arising from the use of the information, whether a claim is asserted in contract, tort, or otherwise. The BHGE logo is a trademark of Baker Hughes, a GE company, LLC. GE and the GE monogram are trademarks of General Electric Company used under trademark license.
© 2017 Baker Hughes, a GE company, LLC - All rights reserved. 67267
Dynamus Extended-Life Drill Bit
Give your horsepower the bit it deserves.
bhge.com
You’re demanding more from your drilling equipment than ever before, with WOB, torque, and motor life seriously changing how tough your BHA has to be—and how long it has to last.
Most often, it’s the bit that fails first.
But what if you had a bit as tough as you needed? If your bit could perform in the harshest conditions and toughest parameters, you could be: • Drilling one-run, one-BHA intervals • Underspending your AFE • Avoiding unplanned trips • Eliminating after-hours surprises • Setting new benchmarks
It’s not hypothetical. It’s now reality.
2
The Dynamus™ extended-life drill bit survives and thrives where others fail. And because the Dynamus bit smooths out lateral vibrations, it prevents the damage that shortens the life of other BHA components.
Dynamus Extended-life drill bit
3
STABLE Dynamus bits incorporate StayTrue™ elements to mitigate the lateral vibrations that reduce wellbore quality
LATERAL VIBRATION COMPARISON Dynamus bit with StayTrue elements
70%
PDC bit without StayTrue elements
28% 0%
20%
40%
60%
80%
SMOOTH DRILLING
SMOOTH DRILLING
100%
Percentage of rotating hours per drilling dysfunction Smooth drilling
Moderate dynamics
High dynamics
Severe dynamics
4
TOUGH Dynamus bits use StayCool™ 2.0 cutter technology to resist wear by lowering the operating temperature of the diamond cutter
Temperature (º F)
600
CUTTING TIP TEMPERATURE
500 400 300 200 100 0
Time Standard Planar Cutter
StayCool 2.0 Cutter
5
GREAT NEW BODY Dynamus bits use enhanced, high-strength materials that resist damage, providing the most durable frame we’ve ever built.
• Tougher raw materials • Empirically calibrated Finite Element Analysis (FEA) routines • Optimized thermal control during manufacturing
6
CASE HISTORY: MIDLAND BASIN
Dynamus extended-life drill bit with StayTrue technology breaks lease records ELIMINATED
ADDITIONAL
INCREASED
“This is the best dull I’ve ever pulled in 12 ¼ in.”
BIT TRIPS 32%
1 RUN
SECTION
IN RUN
INTERVAL’S FASTEST AND
L O N G E S T
7000
Dynamus Performance Compared to Average Offset
6000
Footage (ft)
DELIVERED
- Midland Basin Customer
90 80
5000 4000
70
3000
60
2000
ROP (ft/hr)
COMPLETED
ROP BY
50
1000 0
40
Dynamus Footage
Offset Average ROP
7
Stop tripping. Keep drilling. Own the rock, and get the bit your horsepower deserves. Drilling one-run intervals, reducing your costs, eliminating surprises... You could be doing all that and more today, with a bit designed to survive and thrive in the harshest operations.
Contact your BHGE representative or visit BHGE.com/Dynamus for more information on how you can harness your horsepower. Or if you’d rather have us contact you, please click here.
For more information: bhge.com Baker Hughes, a GE company, LLC and its affiliates (“BHGE”) provides this information on an “as is” basis for general information purposes and believes it to be accurate as of the date of publication. BHGE does not make any representation as to the accuracy or completeness of the information and makes no warranties of any kind, specific, implied or oral, to the fullest extent permissible by law, including those of merchantability and fitness for a particular purpose or use. BHGE hereby disclaims any and all liability for any direct, indirect, consequential or special damages, claims for lost profits, or third party claims arising from the use of the information, whether a claim is asserted in contract, tort, or otherwise. The BHGE logo is a trademark of Baker Hughes, a GE company, LLC. GE and the GE monogram are trademarks of General Electric Company used under trademark license.
© 2017 Baker Hughes, a GE company, LLC - All rights reserved. 67267
