base GRIND | M - LiSEC.com
base GRIND | M Manual edge deletion device
Manual device for removing metal coatings at the edges of glass panes for better adhesion of the primary seal. The operator guides the GRIND|M base along the glass edge over the entire glass sheet. A roller presses against the glass from below, guiding it as needed. The pneumatically driven grinding wheel presses against the glass from above. The operator determines the grinding pressure and speed.
Highlights
Low overall weight makes handling easy Only compressed air connection required
base GRIND | M Technical data
GRIND|M up to 15 mm in one process
L H B
GRIND|M
L (mm)
B (mm)
H (mm)
Operating air pressure (bar)
Air consumption (l/min)
Weight (kg)
225
155
118
7
550
2
LISEC Austria GmbH, Peter Lisec Straße1, A-3353 Seitenstetten, Austria Tel: +43-7477 405-0, Fax +43-7477 405-40, E- Mail: [email protected], www.lisec.com
Technical/Construction changes reserved. Text and symbol fotos may show optional equipment. 09/14
Grinding width
Manual device for removing metal coatings at the edges of glass panes for better adhesion of the primary seal. The operator guides the GRIND|M base along the glass edge over the entire glass sheet. A roller presses against the glass from below, guiding it as needed. The pneumatically driven grinding wheel presses against the glass from above. The operator determines the grinding pressure and speed.
Highlights
Low overall weight makes handling easy Only compressed air connection required
base GRIND | M Technical data
GRIND|M up to 15 mm in one process
L H B
GRIND|M
L (mm)
B (mm)
H (mm)
Operating air pressure (bar)
Air consumption (l/min)
Weight (kg)
225
155
118
7
550
2
LISEC Austria GmbH, Peter Lisec Straße1, A-3353 Seitenstetten, Austria Tel: +43-7477 405-0, Fax +43-7477 405-40, E- Mail: [email protected], www.lisec.com
Technical/Construction changes reserved. Text and symbol fotos may show optional equipment. 09/14
Grinding width
