bay bridge lights: cardboard template
bay bridge lights: cardboard template Here is a 24” x 18” template of the Bay Bridge Lights. You can print out this template and cut it out of paper or trace it onto cardboard. If you have access to a laser cutter, you can cut it out that way!
rectangle to connect the tops of the bridge peaks
these holes are for weaving the light wire
the black holes are for stringing the “X” shapes
this rectangular piece connects the two sides of your bridge. it’s the part a car would drive on... except instead of cars, your Bits will sit on top of here!
these smaller pieces are to connect the feet of your two bridge facades together
rectangle to connect the tops of the bridge peaks
these holes are for weaving the light wire
the black holes are for stringing the “X” shapes
this rectangular piece connects the two sides of your bridge. it’s the part a car would drive on... except instead of cars, your Bits will sit on top of here!
these smaller pieces are to connect the feet of your two bridge facades together
