Beam Clamps
Beam Clamps
Beam Clamps
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. A complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for use with B-Line channels and offer many installation advantages.
Materials & Finishes (Unless otherwise noted) Pipe clamps, pipe hangers, beam clamps, brackets, and rollers are made from low carbon steel strips, plates or rod unless noted. Finish Code
Finish
PLN
Plain
ZN
Electro-Plated Zinc
GRN – HDG CZ SS4 SS6 AL
DURA-GREEN™ Malleable Iron Hot-Dipped Galvanized Chromium Zinc Stainless Steel Type 304 Stainless Steel Type 316 Aluminum
Specification ASTM A1018 Gr. 33 ASTM A1011 SS Grade 33 ASTM B633 SC3 Type III or ASTM A653 ASTM A47 Gr. 32510 ASTM A123 ASTM F1136 ASTM A240 ASTM A240 ASTM B209
Note: A minimum order may apply on special material and finishes.
Load Data The load data published includes a safety factor of 5.0 unless noted (safety factor = ratio of ultimate load to the design load).
Recommended Torque For Setscrews (unless noted) Setscrew Size Foot/Lbs. Nm
1/4”-20
3/8”-16
1/2”-13
4 5
5 7
11 15
Setscrew Size Foot/Lbs. Nm
5/8”-11
3/4”-10
21 28
34 46
See chart on page 72 for bolt torque.
Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
112
Strut Systems
Beam Clamps B351L
D
STEEL C-CLAMP WITH LOCKNUT
Max. Flange Thickness
• Safety Factor of 5 • Setscrew and locknut included • When Retaining Strap is required, order B3362, B3363 or B3365 separately • Standard finishes: ZN, SS4, PLN
*
3/8 Thru 3/4
Sizes Only
E Rod Size
C Part Number With Locknut B351L-3/8 * B351L-1/2 * B351L-5/8 * B351L-3/4 * B351L-7/8
Rod Size A 3/8”-16 1/2”-13 5/8”11 3/4”-10 7/8”-9
B 23/8” 23/8” 23/8” 23/8” 3”
C 23/8” 23/8” 21/4” 31/4” 31/4”
(60.3) (60.3) (60.3) (60.3) (76.2)
D 3/4” 3/4” 3/4” 3/4”
(60.3) (60.3) (57.1) (82.5) (82.5)
E
(19.0) (19.0) (19.0) (19.0) (25.4)
1”
13/8” 13/8” 13/8” 13/8” 17/8”
A
Design Load (34.9) (34.9) (34.9) (34.9) (47.6)
Wt./C
Lbs.
kg
Lbs.
kg
230 380 550 630 1200
(1.03) (1.71) (2.47) (2.83) (5.34)
41 41 60 71 184
(18.6) (18.6) (27.2) (32.2) (83.4)
3/4” (19.0)
B3036L
Max. Flange Thickness
C-CLAMP WITH LOCKNUT • • • • •
Safety Factor of 5 When Retaining Strap is required, order B3363 or B3364 separately Setscrew and locknut included Material: Malleable iron Standard finishes: ZN, PLN
B
ROD SIZE
A Part Number With Locknut B3036L-3/8 B3036L-1/2 B3036L-5/8 B3036L-3/4
Rod Size A 3/8”-16 1/2”-13 5/8”-11 3/4”-10
B 13/4” 13/4” 2” 2”
C 13/4” 13/4” 17/8” 2”
(44.4) (44.4) (50.8) (50.8)
Design Load (44.4) (44.4) (47.6) (50.8)
Wt./C
C
Lbs.
kg
Lbs.
kg
300 380 530 530
(0.89) (1.69) (2.36) (2.36)
29 28 55 72
(13.1) (12.7) (24.9) (32.6)
3/4”
B3362 THRU B3365 RETAINING STRAP
(19.0)
B
• *When ordering specify L (Length) as a suffix to the part number • Material: 14 Gauge (1.9) • Standard finishes: GALV, SS4
L A Part No. B3362* B3363* B3364* B3365*
6” (152.4)
Wt./C for Length L of 8” (203.2) 10” (254.0) 12” (304.8)
Lbs.
kg
Lbs.
kg
Lbs.
kg
Lbs.
kg
17 16 16 21
(7.7) (7.2) (7.2) (9.5)
24 23 23 29
(10.9) (10.4) (10.4) (13.1)
31 30 30 37
(14.0) (13.6) (13.6) (16.8)
38 37 37 46
(17.2) (16.8) (16.8) (20.8)
A 11/4” 11/4” 11/4” 11/2”
(31.7) 7/16” (31.7) 5/8” (31.7) 11/16” (38.1) 3/4”
B (11.1) (15.9) (17.4) (19.0)
For Use With B351-3/8 & 1/2 B351-5/8 & 3/4 B3036-3/8 & 1/2 B3036-5/8 & 3/4 B351-7/8
*See note above.
Reference page 112 for general fitting and standard finish specifications. Strut Systems
113
Beam Clamps
B
Beam Clamps B3033
C
Beam Clamps
REVERSIBLE WIDE JAW WEDGE C-CLAMP (MALLEABLE IRON) • • • •
Safety Factor of 5 Setscrew and locknut included Material: Malleable iron Standard finishes: ZN, PLN
Throat Openings 11/4” (31.7) For 3/8 & 1/2 Sizes
D
B
15/16” (33.3) For 5/8 & 3/4 Sizes Rod Size Throat Opening
Part No.
Rod Size A
B3033-3/8 B3033-1/2 B3033-5/8 B3033-3/4
3/8”-16 1/2”-13 5/8”-11 3/4”-10
Design Load B 21/4” 25/16” 25/8” 211/16”
C (57.1) 2” (58.7) 23/16” (66.7) 21/2” (68.3) 21/2”
D (50.8) (55.5) (63.5) (63.5)
11/8” 11/4” 13/8” 17/16”
Lbs.
kN
Wt./C Lbs.
(28.6) 500 (2.22) (31.7) 810 (3.60) (34.9) 1000 (4.48) (36.5) 1400 (6.22)
46 64 116 140
kg
A
UL Max. Pipe Size
(20.8) 4” (29.0) 8” (52.6) 8” (63.5) 10”
(100) (200) (200) (250)
B3034
C
WEDGE C-CLAMP • • • • •
Safety Factor of 5 3/4” (19.0) Max. Flange Thickness Setscrew and locknut included Material: Malleable iron Standard finishes: ZN, PLN
D
Note: 3/8” & 1/2” Sizes Are Reversible Style
B
*
3/8 & 1/2 Sizes Only
Rod Size
3/4” (19.0) Max.
A
Flange Thickness
Part No.
Rod Size A
B3034-3/8* B3034-1/2* B3034-5/8 B3034-3/4
3/8”-16 1/2”-13 5/8”-11 3/4”-10
Design Load B 15/8” 113/16” 13/4” 2”
C (41.3) 2” (46.0) 23/16” (44.5) 21/8” (50.8) 21/4”
D (50.8) 7/8” (55.5) 13/16” (54.0) 11/8” (57.2 11/8”
Lbs.
kN
(22.2) 560 (2.49) (30.2) 810 (3.60) (28.6) 1000 (4.48) (28.6) 1500 (6.67)
Lbs.
Wt./C kg
UL Max. Pipe Size
54 51 70 98
(24.5) (23.1) (31.7) (44.4)
4” (100) 8” (200) -----
Fig. 65XT REVERSIBLE C-TYPE BEAM CLAMP • • • • • • •
Safety Factor of 5 Max. Flange Thickness Setscrew and locknut included Maximum Pipe Size 4” (100) Design Load 610 Lbs. (2.71kN) Material: Steel Standard finishes: ZN, PLN
3/4” (19.0)
Rod Size 3/8”-16
11/16” (27.0)
15/8” (41.3) 3/4” (19.0) Max. Flange Thickness
7/8”
11/2”
(22.2)
(38.1)
Reference page 112 for general fitting and standard finish specifications.
114
Strut Systems
Beam Clamps Fig. 69 (Formally B-Line B3367) RETAINING STRAP Specify ‘L’ lengths required Minimum recommended return on strap is 1” (25.4) Material: Pre-Galvanized Steel Standard finishes: GALV
Part No. 69-3/8-L 69-1/2-L 69-5/8-L 69-3/4-L
Hole Dia. D
For Use With B3033-3/8
B3034-3/8
& 65XT-3/8 9/16” (30.1) B3033-1/2 & B3034-1/2 11/16” (50.8) B3033-5/8 13/16” (63.5) B3033-3/4 7/16” (30.1)
D
Wt./C** Lbs.
kg
23.9 (10.8)
Beam Clamps
• • • •
11/4” L
(31.7)
23.6 (10.7) 23.2 (10.5) 22.7 (10.3)
** Wt./C based on 6” (152.4) length. For each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.
Fig. 69R RETROFIT RETAINING STRAP • • • •
Specify ‘L’ lengths required Minimum recommended return on strap is 1” (25.4) Material: Pre-Galvanized Steel Standard finishes: GALV
Part No.
Slot Width
69R-3/8-L
7/16” (30.1)
69R-1/2-L
For Use With
11/4” (31.7)
L
Wt./C** Lbs.
kg
B3033-3/8 & B3034-3/8 22.9 (10.4) 65XT-3/8 9/16” (30.1) B3033-1/2 & B3034-1/2 22.6 (10.2)
** Wt./C based on 6” (152.4) length. For each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.
B3037Z Z-PURLIN C-CLAMP • Design Load 500 Lbs. (2.22 kN) • Safety Factor of 5 • Designed for attaching a 3/8”-16 hanger rod to the bottom flange of a Z-purlin • Setscrew and locknut included • Material: Malleable iron • Standard finishes: ZN, PLN
3” (76.2)
313/32” (86.5)
Bottom Hanger Rod Threads 3/8”-16
Reference page 112 for general fitting and standard finish specifications. Strut Systems
115
Beam Clamps B444
Beam Clamps
SERIES ROD SUPPORT • Safety Factor of 5 • Max. Flange Thickness 3/4” (19.0) for 1/4 & 5/16 sizes 1” (25.4) for 3/8 & 1/2 sizes • Setscrew included • Material: Malleable iron • Standard finish: ZN Available in HDG with CZ Hardware
A (Bottom & Back)
D Design Load
Part No.
Thread Size A
Set Screw
B444-1/4
1/4”-20
1/4”-20
13/8”
(34.9)
B444-5/16 B444-3/8 B444-1/2
5/16”-18
1/4”-20
(34.9)
3/8”-16
1/2”-13
1/2”-13
5/8”-11
13/8” 17/8” 23/8”
C
D
Lbs.
kN
Lbs.
13/16” (30.1) 13/16” (30.1)
150 (.66) 24 150 (.66) 23 2” (50.8) 350 (7.12) 65 21/2” (63.5) 1000 (4.45) 132
(47.6) (60.3)
BC442
C
Wt./C kg (10.9) (10.4) (29.5) (59.9)
13/16” (20.6)
LIGHT DUTY BEAM CLAMP • Design Load 75 Lbs. (.33 kN) • Safety Factor of 5 • 11/16” (17.5) Max. Flange Thickness • Setscrew included • Holes tapped 1/4”-20 (Bottom & Back) • Material: 13 Gauge (2.3) • Standard finish: ZN • Wt./C 13 Lbs. (3.9 kg)
11/16” (17.5)
13/4” (44.5)
B210
B210A
BEAM CLAMP
BEAM CLAMP
• Design Load 800 Lbs. (3.56 kN) • Safety Factor of 5 • 5/8” (15.9) Max. Flange Thickness • 1/2”-13 Setscrew included • Standard finish: ZN • Wt./C 100 Lbs. (45.3 kg)
• Design Load 300 Lbs. (1.33 kN) • Safety Factor of 5 • 3/4” (19.0) Max. Flange Thickness • 3/8”-16 Setscrew included • Standard finish: ZN • Wt./C 60 Lbs. (27.2 kg)
5/8” (15.9) Max. Flange Thickness
(9.5)
1/4” (6.3)
3/4” (19.0)
1/2”-13
TAP Bottom Plate Only
3/4” (19.0) Max. Flange Thickness
3/8”
1/2” (12.7)
3/8”-16
TAP Bottom Plate Only
2” (50.8)
11/2” (38.1)
2” (50.8)
11/2” (38.1)
Reference page 112 for general fitting and standard finish specifications.
116
Strut Systems
Beam Clamps B303 THRU B309 BEAM CLAMPS • • • • •
Safety Factor of 5 Max. Flange Thickness 1/16” (1.6) thru 7/8” (22.2) Setscrew included When Retaining Strap is required, order B312 separately Recommended Setscrew Torque: 3/8”-16 150 in-lbs. (16.9 N•m) 1/2”-13 350 in-lbs. (39.5 N•m) • Standard finishes: ZN, HDG
Rod Size A 1/4”-20 5/16”-18 3/8”-16 3/8”-16 1/2”-13 1/2”-13 5/8”-11
11/8” (28.6) Max. Flange Thickness
Wt./C
Design Load
Set Screw 3/8”-16 3/8”-16 3/8”-16 1/2”-13 1/2”-13 1/2”-13 1/2”-13
C 5 2 /16” 25/16” 25/16” 27/16” 27/16” 29/16” 29/16”
(58.7) (58.7) (58.7) (61.9) (61.9) (65.1) (65.1)
T 11 Ga. 11 Ga. 11 Ga. 7 Ga. 7 Ga. 1/4” 1/4”
Lbs. (3.0) (3.0) (3.0) (4.5) (4.5) (6.3) (6.3)
kN
400 600 600 1100 1100 1500 1500
C
Lbs.
(1.78) 72 (2.67) 72 (2.67) 72 (4.89) 97 (4.89) 97 (6.67) 133 (6.67) 133
A
kg
21/2”
(32.6) (32.6) (32.6) (44.0) (44.0) (60.3) (60.3)
(63.5)
B321 SERIES BEAM CLAMPS
15/8”
• • • • •
Safety Factor of 5 111/16” (42.8) Max. Flange Thickness Setscrew included When Retaining Strap is required, order B312 separately Recommended Setscrew Torque: 1/2”-13 350 in-lbs. (39.5 N•m) 5/8”-11 700 in-lbs. (79.0 N•m) • Minimum flange thickness: B321-1 thru B321-3 1/4” (6.3) B321-4 and B321-5 3/8” (9.5) • Standard finishes: ZN, HDG
T
111/16” (42.8) Max. Flange Thickness
(41.3)
C 31/4” (82.5)
A Part No. B321-1 B321-2 B321-3 B321-4 B321-5
Rod Size A
Design Load Setscrew
3/8”-16
1/2”-13
1/2”-13
1/2”-13
5/8”-11
1/2”-13
5/8”-11
5/8”-11
3/4”-10
5/8”-11
C 39/16” 39/16” 39/16” 323/32” 323/32”
T (92.1)
1/4”
(6.3)
(92.1)
1/4”
(6.3)
(92.1)
1/4”
(6.3)
(94.4)
5/16”
(7.9)
(94.4)
5/16”
(7.9)
Lbs.
kN
1300 1400 1600 1800 2000
(5.78) (6.23) (7.12) (8.00) (8.89)
Wt./C Lbs.
kg
187 (84.8) 186 (84.3) 185 (83.9) 239 (108.4) 238 (107.9)
B312 SERIES RETAINING STRAP FOR USE WITH B303 THRU B309 AND B321 SERIES • • • •
3/4” (19.0)
Max. Flange Thickness For thicker beams, step up one flange width size Material: 14 Gauge (1.9) Standard finishes: GALV, HDG
Part No. B312-6 B312-9 B312-12 B312-15
For Flange Width 6” 9” 12” 15”
(152.4) (228.6) (304.8) (381.0)
Wt./C A 9” 12” 15” 18”
(228.6) (304.8) (381.0) (457.2)
13/4”
Lbs.
kg
22 30 40 49
(10.0)
(44.4)
A
(18.1) (22.2)
11/4” (31.7)
Reference page 112 for general fitting and standard finish specifications. Strut Systems
117
1/2” (12.7)
(13.6) 1/4” (6.3)
Beam Clamps
Part No. B303 B304 B305 B306 B307 B308 B309
T
Beam Clamps
Beam Clamps B751
B752
BEAM CLAMP
BEAM CLAMP SWIVEL
• • • • • • • •
• • • • •
Safety Factor of 5 3/4” (19.0) Max. Flange Thickness Setscrew and Locknut included Maximum ATR Size 1/2” Use B753 Swivel Nut (not included) Material: 12 Gauge (2.6) Standard finish: ZN, HDG Wt./C 42 Lbs. (19.0 kg)
Design Load 500 Lbs. (2.22 kN) Safety Factor of 5 Material: 12 Gauge (2.6) Use B753 Swivel Nut (not included) Includes: B751 Clamp (Not 1 pc. B752 Swivel Body Included) 5 3 1 pc. /16”-18 x 1 /4” HHCS 1 pc. 5/16”-18 Hex Nut • Standard finish: ZN • Wt./C 30 Lbs. (13.6 kg)
1”
2”
(25.4)
(50.8)
Overall Height 31/4” (82.5)
3” (76.2)
For Rod Sizes
Design Load 300 Lbs. (1.33 kN) Design Load 500 Lbs. (2.22 kN)
1/4” (6.3) to 1/2” (12.7)
B751-J_-3/8 BEAM CLAMP ASSEMBLY • Includes: 1 pc. B751 Beam Clamp 1 pc. B701 Type J-Hook only 1 pc. SA203-158 Clip 1 pc. 3/8”-16 Hex Nut • 1/4” (6.3) Diameter J-Hook available upon request Part Number changes to B751-J_-1/4 and a 1/4-20 Machine Square Nut (MSQN) is used • Use B753 Swivel Nut (not included) • Standard finishes: ZN
B701-J_-3/8 J-Hook
B751 Clamp
Wt./C Part No.
For Flange Width
Lbs.
kg
B751-J4-3/8
3”-6”
(76.2-152.4)
70
(31.7)
B751-J6-3/8 B751-J9-3/8 B751-J12-3/8
5”-9” 8”-12” 11”-15”
(127.0-228.6)
78 83 88
(35.4)
(203.2-304.8) (279.4-381.0)
(37.6) (39.9)
B753
B701 SERIES
SWIVEL NUT
J-HOOK
• Provides a full swivel of 15° in any direction Specify rod size • Standard finish: ZN
• 1/4” (6.3) Diameter J-Hook available upon request Part Number changes to B751-J_-1/4 and a 1/4-20 Machine Square Nut (MSQN) is used • Standard finish: ZN B701-J_-3/8 J-Hook Only
SA203-158 Clip
A
Part No. Part No.
For Wt./C Rod Size Lbs. kg
B753-3/8
3/8”-16
B753-1/2
1/2”-13
4.0 3.4
(1.8) (1.5)
B701-J4-3/8 B701-J6-3/8 B701-J9-3/8 B701-J12-3/8
TL 3/8”-16 Hex Nut
Thread Length TL
A 83/4” 113/4” 143/4” 173/4”
(222.2) (298.4) (374.6) (450.8)
51/2” 61/2” 61/2” 61/2”
(139.7) (165.1) (165.1) (165.1)
Wt./C Lbs.
kg
26 34 41 48
(11.8) (15.4) (18.6) (21.8)
Reference page 112 for general fitting and standard finish specifications.
118
Strut Systems
Beam Clamps B755 3/8
• • • • •
B756-3/8
BEAM CLAMP
SWING CONNECTOR
Safety Factor of 5 5/8” (15.9) Max. Flange Thickness For 3/8”-16 Hanger Rod only
• • • •
Machine Nuts Material: 12 Gauge (2.6) Includes: 1” 1 pc. B755 Beam Clamp (25.4) 1 pc. 3/8” x 2” Square Head Set Screw 2 pcs. 3/8” Square Nut 21/2” • Standard finish: ZN (60.3) • Wt./C 30 Lbs. (13.6 kg) 3/8” (9.5) Hole For Swing Connector 3/8”-16 ROD
Design Load 150 Lbs. (0.66 kN)
B755 Clamp (Not Included)
Beam Clamps
Design Load 150 Lbs. (0.66 kN) Safety Factor of 5 Material: 12 Gauge (2.6) Includes: 1 pc. B756-3/8 Swing Connector Body 1 pc. 5/16”-18 x 11/4” SHHMS 1 pc. 5/16”-18 Square Nut • Use B753 Swivel Nut (not included) • Standard finish: ZN • Wt./C 15 Lbs. (6.8 kg)
3/8”-16 Square
Overall Height
7/8” (22.2)
17/8” (47.6)
Design Load 300 Lbs. (1.33 kN)
B755-3/8-J_ BEAM CLAMP ASSEMBLY • Includes: 1 pc. B755-3/8 Beam Clamp 1 pc. B705 Type J-Hook only 1 pc. B705 Clip 1 pc. 1/4”-20 Square Nut • Standard finish: ZN
B755 Clamp
B705-J_ J-Hook Only
B705 Clip
Wt./C Part No.
For Flange Width
B755-3/8-J4 B755-3/8-J6 B755-3/8-J10 B755-3/8-J12
4”-6” 6”-10” 10”-12” 12”-14”
kg
47 51 53 55
(21.3)
(101.6-152.4) (152.4-254.0) (254.0-304.8) (304.8-355.6)
B702
B705 SERIES
CLEAT
J-HOOK
• To eliminate the swiveling of the rod when required, use the B702 Cleat and a locking nut. This can be used with the B751 Beam Clamp, B752 Swivel or B756 Swing Connector. • Material: 12 Gauge (2.6) • Standard finish: ZN • Wt./C 6 Lbs. (2.7 kg)
Lbs.
(23.1) (24.0) (24.9)
B705-J_ J-Hook Only
• Use with B755-3/8 • Standard finish: ZN
B705 Clip
A
1/4”-20 Machine Nut
TL
17/32” (30.9)
Part No.
1” (25.4) 13/32” (10.3)
Dia. Hole
B705-J4 B705-J6 B705-J10 B705-J12
Thread Length TL
A 73/8” 113/8” 133/8” 153/8”
(187.3) (288.9) (339.7) (390.5)
3” 41/2” 41/2” 41/2”
(76.2) (114.3) (114.3) (114.3)
Reference page 112 for general fitting and standard finish specifications. Strut Systems
119
Wt./C Lbs.
17 21 23 25
kg (7.7) (9.5) (10.4) (11.3)
Beam Clamps B750 SERIES
Beam Clamps
BEAM CLAMP
1/2”-13 Rod & Hex Nut Sold Separately
• Safety Factor of 5 • Design Load 500 Lbs. (2.22 kN) • Recommended Torque: J-Hook Nut 125 in-lbs. (14.1 N•m) • Maximum Flange Thickness 5/8” (15.9) • Standard finish: ZN
7 Ga (4.6)
Wt./C Part No.
For Flange Width
B750-J4 B750-J6 B750-J9 B750-J12
3”-6” 5”-9” 8”-12” 11”-15”
Lbs.
15/8”
kg
127/32” (46.8)
(41.3)
109 124 135 147
(76.2-152.4) (127.0-228.6) (203.2-304.8) (279.4-381.0)
(49.4) (56.2) (61.2) (66.7)
B700 SERIES J-HOOK • Includes: 1 pc. J-Bolt 1 pc. Hex Nut • Maximum Flange Thickness 5/8” (15.9) • Standard finish: ZN
1/2”-13 Threads
TL A Part No.
Thread Length TL
A
B700-J4 B700-J6 B700-J9 B700-J12
81/2”
(215.9)
111/2” 141/2” 171/2”
(292.1) (368.3) (444.5)
63/4”
(171.4)
93/4” (247.6) 123/4” (323.8) 153/4” (400.0)
Wt./C Lbs.
kg
44 53 63 78
(19.9) (24.0) (28.6) (35.4)
B500 SERIES SQUARE U-BOLT • Includes: 1 pc. U-Bolt only 2 pcs. 3/8”-16 Hex Nuts • Additional sizes available • Standard finish: ZN, SS4
121/32” (42.1)
21/2” (63.5)
A 3/8”-16 Threads
Part No. B500-3-3/8 B500-5
A 33/8” 5”
(85.7) (127.0)
Channel Size
Wt./C Lbs.
kg
15/8” x 15/8” 31/4” x 15/8”
25 33
(11.3) (14.9)
Reference page 112 for general fitting and standard finish specifications.
120
Strut Systems
Beam Clamps B441-22A
B314
BEAM CLAMP
BEAM CLAMP
BEAM CLAMP
• Design Load 1200 Lbs. (5.34 kN) when used in pairs • Safety Factor of 5 • 3/4” (19.0) Max. Flange Thickness • For use with 13/16” (20.6) to 15/8” (41.3) high channel • Recommended Torque: 150 in-lbs. (16.9 N•m) • Sold in pieces • Other flange thickness variations are available, contact B-Line Engineering for sizes • Standard finishes: ZN, HDG, SS4 • Wt./C 87 Lbs. (39.4 kg)
• Design Load 1200 Lbs. (5.34 kN) when used in pairs • Safety Factor of 5 • 3/4” (19.0) Max. Flange Thickness • For use with 15/8” (41.3) to 31/4” (82.5) high channel • Recommended Torque: 150 in-lbs. (16.9 N•m) • Sold in pieces • Other flange thickness variations are available, contact B-Line Engineering for sizes • Standard finishes: ZN, HDG, SS4 • Wt./C 93 Lbs. (42.2 kg)
• Design Load 900 Lbs. (4.00 kN) when used in pairs • Safety Factor of 5 • 5/8” (15.9) Max. Flange Thickness • For use with channel 15/8” (41.3) in height • Setscrew included • Sold in pieces • Standard finishes: ZN, GRN, HDG, SS4 • Wt./C 105 Lbs. (47.6 kg)
3” (76.2)
23/8” (60.3)
3”
23/8”
(76.2)
(60.3)
1” (25.4)
33/8” (85.7)
13/4”
5”
1”
(44.4) 1/4” (6.3)
(127.0)
(25.4) 1/4” (6.3)
1/4” (6.3)
B441Z-22
B441Z-22A
BEAM CLAMP
BEAM CLAMP
• Design Load 1200 Lbs. (5.34 kN) when used in series • Safety Factor of 5 • Sold in pieces • For use with 13/16” (20.6) to 15/8” (41.3) high channel • Recommended Torque: 150 in-lbs. (16.9 N•m) • Standard finishes: ZN • Wt./C 95 Lbs. (43.1 kg)
• Design Load 1200 Lbs. (5.34 kN) when used in series • Safety Factor of 5 • Sold in pieces • For use with 15/8” (41.3) to 31/4” (82.5) high channel • Recommended Torque: 150 in-lbs. (16.9 N•m) • Standard finishes: ZN • Wt./C 101 Lbs. (45.8 kg)
1”
1”
(25.4)
(25.4)
3”
3”
(76.2)
(76.2) 1/4” (6.3)
45/8” (117.5)
45/8” (117.5)
1/4” (6.3)
23/4” (69.9)
43/8” (111.1)
Reference page 112 for general fitting and standard finish specifications. Strut Systems
121
37/16” (87.3)
13/4” (44.4)
Beam Clamps
B441-22
Beam Clamps
Beam Clamps B211
B213
ZEE BEAM CLAMP
I-BEAM CLAMP
• Design Load 600 Lbs. (2.67 kN) when used in pairs • Safety Factor of 5 • 1” (25.4) Max. Flange Thickness • 1/2”-13 Setscrew included • Sold in pieces • Order 1/2”-13 HHCS and Channel Nut separately • Standard finishes: ZN, HDG • Wt./C 66 Lbs. (29.9 kg)
• Design Load 900 Lbs. (4.00 kN) when used in pairs • Safety Factor of 5 • 7/8” (22.2) Max. Flange Thickness • 1/2”-13 Setscrew included • Sold in pieces • Order 1/2”-13 x 21/4” HHCS and Channel Nut separately • Material: Malleable iron • Standard finishes: ZN, GRN • Wt./C 95 Lbs. (43.1 kg)
11/2” (38.1)
11/2”
3/8”
(38.1)
(9.5)
31/4” (82.5)
21/2” (63.5)
B212-1/4
B355 BEAM CLAMP
I-BEAM CLAMP
• Design Load 1200 Lbs. (5.34 kN) when used in pairs • Safety Factor of 5 • 5/8” (15.9) Max. Flange Thickness • Sold in pieces • Order 1/2”-13 x 11/2” HHCS and Channel Nut separately • Standard finishes: ZN, GRN, HDG, SS4 • Wt./C 30 Lbs. (13.6 kg)
• Design Load 600 Lbs. (2.67 kN) when used in pairs • Safety Factor of 5 • 7/8” (22.2) Max. Flange Thickness • 3/8”-16 Setscrew included • Sold in pieces • Standard finish: ZN • Wt./C 41 Lbs. (18.6 kg)
15/8”
7/8” (22.2)
(41.3)
I.D.
1/4” Thick
(6.3)
5/8” (15.9)
127/32”
2”
(46.8)
(50.8) 1/4”
11/4”
(6.3)
(31.7)
B435
B212-3/8 I-BEAM CLAMP
BEAM CLAMP
• Design Load 1000 Lbs. (4.45 kN) when used in pairs • Safety Factor of 5 • 11/8” (28.6) Max. Flange Thickness • 1/2”-13 Setscrew included • Sold in pieces • Standard finishes: ZN, HDG • Wt./C 62 Lbs. (28.1 kg)
• Design Load 900 Lbs. (4.00 kN) when used in pairs • Safety Factor of 5 • 21/8” (54.0) Max. Flange Thickness • 1/2”-13 x 2” Setscrew included • Sold in pieces • Standard finish: ZN • Wt./C 82 Lbs. (37.2 kg)
11/4”
(31.7) I.D.
3/8” (9.5)
3/8” THICK
11/4” (31.7)
(9.5)
27/8” (73.0)
2” (50.8)
2”
11/4”
(50.8)
(31.7)
Reference page 112 for general fitting and standard finish specifications.
122
Strut Systems
Beam Clamps B405
B405A
BEAM CLAMP
SUSPENSION MEMBER
• Design Load 1100 Lbs. (4.89 kN) when used in pairs • Safety Factor of 5 • 21/2” (63.5) Max. Flange Thickness without channel • 1/2”-13 x 11/2” Setscrew included • Sold in pieces • Standard finish: ZN • Wt./C 92 Lbs. (41.7 kg)
• Standard finishes: ZN, GRN • Wt./C 75 Lbs. (34.0 kg)
SUSPENSION MEMBER WITH BEAM CLAMP • 7/8” (22.2) Max. Flange Thickness • Includes: 1 pc. B405 Suspension Member 1 pc. B213 I-Beam Clamp 1 pc. 1/2”-13 x 21/2” HHCS 1 pc. 1/2”-13 Hex Nut • Material: Malleable iron • Standard finishes: ZN, GRN • Wt./C 183 Lbs. (83.0 kg)
37/8” (87.3) O.D.
1/4” (6.3)
111/16” (42.9) I.D.
10°
37/16” 2 Holes 9/16” (14.3) DIA.
27/8” (73.0)
2” 3/8” (9.5)
11/2” (38.1)
(50.8)
(87.3)
111/16”
17/8”
17/8”
(47.6) O.D.
(47.6)
B318 THRU B320 BEAM CLAMP ASSEMBLY • Safety Factor of 5 • 7/8” (22.2) Max. Flange Thickness • Includes: 1 pc. B333 Slotted U-Support 2 pcs. B213 I-Beam Clamp 2 pcs. 1/2”-13 x 21/2” HHCS 2 pcs. 1/2”-13 Hex Nuts • Material: Malleable iron • Standard finishes: ZN, GRN
Part No. B318 B319 B320
A 71/4” 81/2” 103/8”
(184.1) (215.9) (263.5)
1/4” (6.3)
15/8” (41.3)
B A
Design Lbs. For Flange Width B 23/8”-41/2” (60.3-114.3) 1200 33/4”-53/4” (95.2-146.0) 800 55/8”-75/8” (142.9-193.7) 560
Load
Wt./C
kN
Lbs.
kg
(5.34) (3.56) (2.49)
325 340 357
(147.4) (154.2) (161.9)
B602A THRU B602C BEAM CLAMP WITH GUSSET ASSEMBLY • Safety Factor of 5 • 7/8” (22.2) Max. Flange Thickness • Includes: 1 pc. B451 Slotted Three Hole U Support with Gusset 2 pcs. B213 I-Beam Clamp 2 pcs. 1/2”-13 x 21/2” HHCS 2 pcs. 1/2”-13 Hex Nuts • Material: Malleable iron • Standard finishes: ZN, GRN
Part No. B602A B602B B602C
A 71/4” 81/2” 103/8”
(184.1) (215.9) (263.5)
1/4” (6.3)
13/4” (44.4)
B A
Design Lbs. For Flange Width B 23/8”-41/2” (60.3-114.3) 1200 33/4”-53/4” (95.2-146.0) 1200 55/8”-75/8” (142.9-193.7) 1200
Load
Wt./C
kN
Lbs.
kg
(5.34) (5.34) (5.34)
365 383 408
(165.1) (173.7) (185.0)
Reference page 112 for general fitting and standard finish specifications. Strut Systems
123
(42.9)
Beam Clamps
B427
Beam Clamps B760-22 SERIES
B760-22A SERIES
Beam Clamps
BEAM CLAMP
BEAM CLAMP
• 1” (25.4) Max. Flange Thickness • For use with 13/16” (20.6) to 15/8” (41.3) high channel • Recommended Torques: U-Bolt Nuts 150 in-lbs. (16.9 N•m) 33/8” J-Hook Nut 60 in-lbs. (6.8 N•m) (85.7) • Includes: 1 pc. B760 Plate 1 pc. B701 Type J-Hook only 1 pc. B500-33/8” U-Bolt only 3 pcs. 3/8”-16 Hex Nuts 1/4” • Standard finish: ZN (6.3)
• 1” (25.4) Max. Flange Thickness • For use with 15/8” (41.3) to 31/4” (82.5) high channel • Recommended Torques: 5” U-Bolt Nuts 150 in-lbs. (16.9 N•m) (127.0) J-Hook Nut 60 in-lbs. (6.8 N•m) • Includes: 1 pc. B760 Plate 1 pc. B701 Type J-Hook only 1 pc. B500-5” U-Bolt only 1/4” 3 pcs. 3/8”-16 Hex Nuts (6.3) • Standard finish: ZN
3”
3”
(76.2)
(76.2)
3/8” (9.5) Dia.
3/8” (9.5) Dia.
J-Hook and Hex Nut
J-Hook and Hex Nut
Wt./C Part No.
For Flange Width 4”-57/8”
B760-22-J4 B760-22-J6 6”-87/8” B760-22-J9 9”-117/8” B760-22-J12 12”-147/8”
Lbs.
(101.6-149.2) (152.4-225.4) (228.6-301.6) (304.8-377.8)
122 129 135 141
Wt./C Part No.
kg
For Flange Width 4”-57/8”
B760-22A-J4 B760-22A-J6 6”-87/8” B760-22A-J9 9”-117/8” B760-22A-J12 12”-147/8”
(55.3) (58.5) (61.2) (63.9)
(101.6-149.2) (152.4-225.4) (228.6-301.6) (304.8-377.8)
B761-22 SERIES
B761-22A SERIES
BEAM CLAMP
BEAM CLAMP
• 1” (25.4) Max. Flange Thickness • For use with 13/16” (20.6) to 15/8” (41.3) high channel • Recommended Torques: U-Bolt Nuts 150 in-lbs. (16.9 N•m) ATR Nuts 60 in-lbs. (6.8 N•m) • Includes: 33/8” 2 pcs. B700 Plates 3 2 pcs. B500-3 /8” U-Bolts only (85.7) 1 pc. 3/8”-16 ATR (Length) 6 pcs. 3/8”-16 Hex Nuts • Standard finish: ZN
• 1” (25.4) Max. Flange Thickness • For use with 15/8” (41.3) to 31/4” (82.5) high channel • Recommended Torques: U-Bolt Nuts 150 in-lbs. (16.9 N•m) ATR Nuts 60 in-lbs. (6.8 N•m) • Includes: 2 pcs. B700 Plates 2 pcs. B500-5” U-Bolts only 1 pc. 3/8”-16 ATR (Length) 6 pcs. 3/8”-16 Hex Nuts 1/4” • Standard finish: ZN (6.3)
1/4” (6.3)
3”
Part No.
For Flange Width
B761-22-4 4”-57/8” (101.6-149.2) B761-22-6 6”-87/8” (152.4-225.4) B761-22-9 9”-117/8” (228.6-301.6) B761-22-12 12”-147/8” (304.8-377.8)
ATR Length 4” 6” 9” 12”
Wt./C Lbs. kg
(101.6) 202
(91.6)
(152.4) 206
(93.4)
(228.6) 214
(97.0)
Part No.
For Flange Width
B761-22A-4 4”-57/8” (101.6-149.2) B761-22A-6 6”-87/8” (152.4-225.4) B761-22A-9 9”-117/8” (228.6-301.6) B761-22A-12 12”-147/8” (304.8-377.8)
(304.8) 221 (100.2)
129 136 142 148
(58.5) (61.7) (64.4) (67.1)
5”
3/8”-16 (9.5) ATR
(76.2)
and Hex Nuts
kg
(127.0)
3”
3/8”-16 (9.5) ATR
(76.2)
Lbs.
and Hex Nuts
ATR Length 4” 6” 9” 12”
Wt./C Lbs. kg
(101.6) 216
(98.0)
(152.4) 220
(99.8)
(228.6) 228 (103.4) (304.8) 235 (106.6)
Reference page 112 for general fitting and standard finish specifications.
124
Strut Systems
Beam Clamps B614
COLUMN SUPPORT FOR B22
B613A
COLUMN SUPPORT FOR B22
COLUMN SUPPORT FOR B52
• Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 • Use with B22 and B24 Channel • Setscrews to be torqued to 19 ft./Lbs • Sold in pairs • Standard finishes: ZN, GRN, HDG • Wt./C 100 Lbs. (45.3 kg)
• Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 • Use with B52 and B54 Channel • Setscrews to be torqued to 19 ft./Lbs • Sold in pairs • Standard finishes: ZN, GRN, HDG • Wt./C 100 Lbs. (45.3 kg)
15/8”
15/8”
(41.3)
(41.3)
31/2”
31/2”
(88.9)
(88.9)
3/8” x 2” Cone
3/8” x 2” Cone
Point Setscrews
Point Setscrews
B422 SERIES RIGHT ANGLE CLAMP • Safety Factor of 5 • Material: 7 Gauge (4.5) • Standard finishes: ZN, SS4
Part No. B422-1/2 B422-3/4 B422-1 B422-11/4 B422-11/2 B422-2 B422-21/2 B422-3 B422-31/2 B422-4
Design Load Vertical Pull
Conduit Size 1/2” 3/4”
A 23/8” 23/8” 27/8” 27/8” 31/4” 311/16” 41/4” 47/8” 57/16” 6”
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100)
1” 11/4” 11/2” 2 21/2” 3” 31/2” 4”
Lbs. (60.3) (60.3) (73.0) (73.0) (82.5) (93.7) (107.9) (123.8) (138.1) (152.4)
250 300 400 400 500 600 700 800 900 1000
kg (1.11) (1.33) (1.78) (1.78) (2.22) (2.67) (3.11) (3.56) (4.00) (4.45)
A
Wt./C Lbs.
38 39 48 50 59 75 98 111 123 135
kg (17.2) (17.7) (21.8) (22.7) (26.7) (34.0) (44.4) (50.3) (55.8) (61.2)
U-Bolt and Hex Nuts Design Load Vertical Pull
B107S
B593
U-SUPPORT
CLEVIS SWIVEL
• Material: 7 Gauge (4.5) • Standard finishes: ZN, GRN • Wt./C 51 Lbs. (23.1 kg)
• Includes: 1 pc. 3/8”-16 x 2” HHCS 1 pc. 3/8”-16 Hex Nut • Material: 11 Gauge (3.0) • Standard finishes: ZN, GRN • Wt./C 31 Lbs. (14.0 kg)
33/4” (95.2)
1” (25.4)
13/8”
17/16”
(34.9)
(36.5)
7/16” (11.1) Dia.
13/4”
O.D. (44.4)
4 Holes 9/16” (14.3) Dia.
• Illustration shows B107S and B593 used together • Design Load 900 Lbs., strength of assembly only • Verify anchorage
21/2” (63.5)
11/4” (31.7)
Reference page 112 for general fitting and standard finish specifications. Strut Systems
125
9/16” (14.3) Dia.
Beam Clamps
• Quick installation (one bolt to tighten) • Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 • Use with B22 and B24 Channel • Sold in pairs • Standard finish: ZN • Wt./C 50 Lbs. (22.6 kg)
B613
Pipe/Conduit Clamps & Hangers Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. A complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for use with our channels and offer many installation advantages.
Materials & Finishes*
Pipe/Conduit Clamps & Hangers
Pipe clamps, pipe hangers, beam clamps, brackets, and rollers are made from low carbon steel strips, plates or rod unless noted. Finish Code PLN
Finish Plain
ZN
Electro-Plated Zinc
GRN DCU HDG YZN SS4 SS6 AL
DURA-GREEN™ DURA-COPPER™ Hot-Dipped Galvanized Yellow Zinc Chromate Stainless Steel Type 304 Stainless Steel Type 316 Aluminum
Specification ASTM A1011 33,000 PSI min. yield ASTM B633 SC3 Type III or ASTM A653
ASTM A123 ASTM B633 SC3 Type II ASTM A240 ASTM A240 ASTM B209
*Unless otherwise noted.
Load Data The load data published includes a safety factor of 5.0 unless noted (safety factor = ratio of ultimate load to the design load).
Recommended Torque For Setscrews (unless noted) Setscrew Size Foot/Lbs. Nm
1/4”-20
3/8”-16
1/2”-13
4 5
5 7
11 15
Setscrew Size Foot/Lbs. Nm
5/8”-11
3/4”-10
21 28
34 46
*See chart on page 72 for bolt torque.
Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
126
Strut Systems
Pipe Clamps B2207 THRU B2213 MULTI-GRIP PIPE CLAMPS FOR THINWALL (EMT), I.M.C., RIGID CONDUIT OR PIPE • • • • •
Design Load 1
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Includes Combination Recess Hex Head Machine Screw and Square Nut Material: ASTM A1011 33,000 PSI min. yield Standard finish: ZN
Design Load 3 Design Load 2
Nominal Size
Material Thickness
B2207
38 / ” (10)
16 Ga. (1.5)
B2208
1/2” (15)
16 Ga. (1.5)
B2209
3/4” (20)
14 Ga. (1.9) .917-1.081 (23.2-27.4) B2002, B2009,
400
(1.78)
50
(.22)
50
(.22)
12
(5.4)
(25) 14 Ga. (1.9) 1.125-1.375 (28.6-34.9) B2003, B2010,
400
(1.78)
50
(.22)
50
(.22)
13
(5.9)
B2211
11/4” (32) 14 Ga. (1.9) 1.500-1.691 (38.1-42.9) B2004, B2011, B2033, B2034
400
(1.78)
50
(.22)
50
(.22)
15
(6.8)
B2212
11/2” (40) 12 Ga. (2.6) 1.735-1.931 (44.0-49.0) B2005, B2012, B2035 B2006, B2013 2” (50) 12 Ga. (2.6) 2.192-2.400 (55.7-60.9) B2039
600
(2.67)
75
(.33)
75
(.33)
23
(10.4)
600
(2.67)
75
(.33)
75
(.33)
26
(11.8)
B2210
B2213
1”
O.D. Size Range
Alternate For Design Load 1 Design Load 2 Design Load 3 Wt./C Lbs. kN Lbs. kg Lbs. kg Lbs. kg Clamp No.’s B2000, B2001, (1.78) (4.1) .557-.706 (14.2-17.9) 50 (.22) 50 (.22) 9 400 B2026 (1.78) (5.0) .701-.875 (17.8-22.2) B2001, B2008, 400 50 (.22) 50 (.22) 11 B2027, B2028
B2030, B2031,
BPC-8 THRU BPC-64 BREAK-APART CONDUIT CLAMP • • • •
Design Load 200 Lbs. (.896 kN) Includes Combination Recess Hex Head Machine Screw Material: ASTM A1011 33,000 PSI min. yield Standard finish: ZN
Part No. BPC-8 BPC-12 BPC-16 BPC-20 BPC-24 BPC-32 BPC-40 BPC-48 BPC-56 BPC-64
A Rigid or EMT Conduit Size 1/2” (21.3) 3/4” (26.7) 1” (33.4) 11/4” (42.2) 11/2” (48.3) 2” (60.3) 21/2” (73.0) 3” (88.9) 31/2” (101.6) 4” (114.3)
Wt./C Lbs.
11.2 12.7 14.5 16.5 18.5 21.5 21.5 22.0 23.0 27.5
kg (5.1) (5.8) (6.6) (7.5) (8.4) (9.8) (9.8) (10.0) (10.4) (12.5)
A
Design Load
Reference page 126 for general fitting and standard finish specifications. Strut Systems
127
Pipe/Conduit Clamps & Hangers
Part No.
Pipe Clamps B2000 SERIES PIPE AND CONDUIT CLAMPS • • • •
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Includes Combination Recess Hex Head Machine Screw and Square Nut Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finishes: ZN, HDG, SS4, SS6, AL
Design Load 1
Note: For EMT sizes 21/2” and larger use rigid conduit sizes.
Design Load 2 Design Load 3
Pipe/Conduit Clamps & Hangers
THINWALL CONDUIT (EMT) CLAMPS Part No. B2000 B2001 B2002 B2003 B2004 B2005 B2006
Conduit Size 3/8”
(10)
1/2”
(15)
3/4”
(20)
1” 11/4” 11/2” 2”
(25) (32) (40) (50)
Material Thickness 16 16 16 14 14 12 12
Ga. Ga. Ga. Ga. Ga. Ga. Ga.
(1.5) (1.5) (1.9) (1.9) (1.9) (2.6) (2.6)
Design Load 1 Design Load 2 Design Load 3
Wt./C
Lbs.
kN
Lbs.
kg
Lbs.
kg
Lbs.
kg
400 400 400 600 600 800 800
(1.78)
50 50 50 75 75 125 125
(.22)
50 50 50 75 75 125 125
(.22)
10 10 11 16 19 28 33
(4.5)
(1.78) (1.78) (2.67) (2.67) (3.56) (3.56)
(.22) (.22) (.33) (.33) (.56) (.56)
(.22) (.22) (.33) (.33) (.56) (.56)
(4.5) (5.0) (7.2) (8.6) (12.7) (14.9)
RIGID CONDUIT OR PIPE CLAMPS Part No. B2001 B2008 B2009 B2010 B2011 B2012 B2013 B2014 B2015 B2016 B2017 B2018 B2019 B2020 B2021 B2022 B2130 B2132
Conduit Size 3/8”
(10)
1/2”
(15)
3/4”
(20)
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 41/2” 5” 6” 7” 8” 10 12”
(25) (32) (40) (50) (65) (80) (90) (100) (115) (125) (150) (175) (200) (254) (305)
Material Thickness 16 16 14 14 14 12 12 12 12 11 11 11 11 11 11 11 11 11
Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga.
(1.5) (1.5) (1.9) (1.9) (1.9) (2.6) (2.6) (2.6) (2.6) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0)
Design Load 1 Design Load 2 Design Load 3
Wt./C
Lbs.
kN
Lbs.
kg
Lbs.
kg
Lbs.
kg
400 400 600 600 600 800 800 800 800 1000 1000 1000 1000 1000 1000 1000 1000 1000
(1.78)
50 50 75 75 75 125 125 125 125 200 200 200 200 200 250 250 250 250
(.22)
50 50 75 75 75 125 125 125 125 150 150 150 150 150 200 200 200 200
(.22)
10 11 15 16 20 30 34 38 44 61 66 70 77 100 115 128 160 185
(4.5)
(1.78) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45)
(4.45) (4.45)
(.22) (.33) (.33) (.33) (.56) (.56) (.56) (.56) (.89) (.89) (.89) (.89) (.89) (1.11) (1.11) (1.11) (1.11)
(.22) (.33) (.33) (.33) (.56) (.56) (.56) (.56) (.67) (.67) (.67) (.67) (.67) (.89) (.89) (.89) (.89)
(5.0) (6.8) (7.2) (9.1) (13.6) (15.4) (17.2) (19.9) (27.6) (29.9) (31.7) (34.9) (45.3) (52.1) (58.0) (72.6) (83.9)
Reference page 126 for general fitting and standard finish specifications.
128
Strut Systems
Pipe Clamps B2000 SERIES
Design Load 1
PVC CLAMPS • • • •
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Includes Combination Recess Hex Head Machine Screw and Square Nut Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finishes: PVC
CLAMP SIZING CHART FOR PVC COATED RIGID CONDUIT AND CLAMPS
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6”
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150)
.020 (.51mm)
0
.020 (.51mm)
B2002 B2030 B2010 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115
B2002 B2030 B2010 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115
B2009 B2003 B2004 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115
CLAMP SIZING CHART FOR PVC COATED THINWALL (EMT) CONDUIT AND CLAMPS Conduit Coating .020 (.51mm) .040 (1.01mm) Clamp Coating Clamp Coating
Nominal Conduit Size 3/8” 1/2” 3/4”
1” 11/4” 11/2” 2”
(10) (15) (20) (25) (32) (40) (50)
0
.020 (.51mm)
0
.020 (.51mm)
B2026 B2027 B2009 B2003 B2004 B2005 B2039
B2026 B2027 B2009 B2031 B2011 B2005 B2039
B2026 B2027 B2009 B2031 B2011 B2005 B2039
B2001 B2008 B2009 B2031 B2011 B2012 B2013
*See B2000 O.D. pipe and conduit clamp chart on pgs. 130-131 for corresponding clamp load data.
*See B2000 O.D. pipe and conduit clamp chart on pgs. 130-131 for corresponding clamp load data.
B2000 SERIES
Design Load 1
COPPER TUBING CLAMPS • • • •
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Includes Combination Recess Hex Head Machine Screw and Square Nut Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finish: Exclusive DURA-COPPER™ Finish (DCU) Design Load 2 Design Load 3
COPPER TUBING CLAMPS Part No.
Tubing Size
B2024DCU B2025DCU B2026DCU B2027DCU B2008DCU B2030DCU B2010DCU B2011DCU B2038DCU B2042DCU B2046DCU B2050DCU B2054DCU B2062DCU B2110DCU B2126DCU
1/4” 3/8” 1/2” 5/8” 3/4”
1” 11/4” 11/2” 2 21/2” 3 31/2” 4 5 6 8
O.D. Size In.
(mm)
.375 .500 .625 .750 .875 1.125 1.375 1.625 2.125 2.625 3.125 3.625 4.125 5.125 6.125 8.125
(9.5) (12.7) (15.9) (19.0) (22.2) (28.6) (34.9) (41.3) (54.0) (66.7) (79.4) (92.1) (104.8) (130.2) (155.6) (206.4)
Material Design Load 1 Design Load 2 Design Load 3 kN Lbs. kg Lbs. kg Thickness Lbs.
Lbs.
kg
16 Ga. 16 Ga. 16 Ga. 16 Ga. 16 Ga. 14 Ga. 14 Ga. 14 Ga. 12 Ga. 12 Ga. 12 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga.
8 9 10 10 11 15 17 19 32 35 39 54 61 70 94 123
(3.6)
(1.5) (1.5) (1.5) (1.5) (1.5) (1.9) (1.9) (1.9) (2.6) (2.6) (2.6) (3.0) (3.0) (3.0) (3.0) (3.0)
400 400 400 400 400 600 600 600 800 800 800 1000 1000 1000 1000 1000
(1.78) (1.78) (1.78) (1.78) (1.78) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45) (4.45) (4.45)
50 50 50 50 50 75 75 75 125 125 125 200 200 200 250 250
(.22) (.22) (.22) (.22) (.22) (.33) (.33) (.33) (.56) (.56) (.56) (.89) (.89) (.89) (1.11) (1.11)
50 50 50 50 50 75 75 75 125 125 125 150 150 150 200 200
(.22) (.22) (.22) (.22) (.22) (.33) (.33) (.33) (.56) (.56) (.56) (.67) (.67) (.67) (.89) (.89)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
129
Wt./C
(4.1) (4.5) (4.5) (5.0) (6.8) (7.7) (8.6) (14.5) (15.9) (17.7) (24.5) (27.6) (31.7) (42.6) (55.8)
Pipe/Conduit Clamps & Hangers
0 B2008 B2030 B2032 B2005 B2012 B2013 B2014 B2015 B2016 B2017 B2019 B2020
Size 3/4”
Design Load 3
Conduit Coating .020 (.51mm) .040 (1.01mm) Clamp Coating Clamp Coating
Nominal Conduit 1/2”
Design Load 2
Pipe Clamps B2000 SERIES
Design Load 1
O.D. PIPE AND CONDUIT CLAMPS • • • •
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Other sizes available upon request Includes Combination Recess Hex Head Machine Screw and Square Nut. • Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finishes: ZN, HDG, SS4
O.D. O.D.
Design Load 2 Design Load 3
O.D. CLAMPS
Pipe/Conduit Clamps & Hangers
Part No.
O.D. Size (in.)
Hardware Size
Material Design Load 1 Design Load 2 Design Load 3 Gauge Thickness Lbs. kN Lbs. kN Lbs. kN
Wt./C Lbs.
kg
B2023
1/4”
(6.3)
1/4”-20
16
(1.5)
120
(.54)
30
(.13)
30
(.13)
8
(3.6)
B2024
3/8”
(9.5)
1/4”-20
16
(1.5)
300
(1.33)
40
(.18)
40
(.18)
8
(3.6)
B2025
1/2”
(12.7)
1/4”-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
9
(4.1)
B2026
5/8”
(15.9)
1/4”-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
10
(4.5)
B2027
3/4”
(19.0)
1/4”-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
10
(4.5)
B2008
7/8”
(22.2)
1/4”-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
11
(5.0)
B2009
1”
(25.4)
1/4”-20
14
(1.9)
500
(2.22)
75
(.33)
75
(.33)
15
(6.8)
B2030
11/8”
(28.6)
1/4”-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
15
(6.8)
B2031
11/4”
(31.7)
1/4”-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
16
(7.3)
B2010
13/8”
(34.9)
1/4”-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
17
(7.7)
B2004
11/2”
(38.1)
1/4”-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
18
(8.2)
B2011
15/8”
(41.3)
1/4”-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
19
(8.6)
B2005
13/4”
(44.4)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
29
(13.1)
B2012
17/8”
(47.6)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
30
(13.6)
B2037
2
(50.8)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
30
(13.6)
B2038
21/8”
(54.0)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
32
(14.5)
B2039
21/4”
(57.1)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
32
(14.5)
B2013
23/8”
(60.3)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
34
(15.4)
B2041
21/2”
(63.5)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
35
(15.9)
B2042
25/8”
(66.7)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
35
(15.9)
B2043
23/4”
(69.8)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
38
(17.2)
B2014
27/8”
(73.0)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
38
(17.2)
B2045
3
(76.2)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
38
(17.2)
B2046
31/8”
(79.4)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
39
(17.7)
B2047
31/4”
(82.5)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
41
(18.6)
B2048
33/8”
(85.7)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
43
(19.5)
B2015
31/2”
(88.9)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
44
(20.0)
B2050
35/8”
(92.1)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
54
(24.5)
B2051
33/4”
(95.2)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
57
(25.8)
B2052
37/8”
(41.3)
5/16”-18
11
(3.0)
1000
(4.45
200
(.89)
150
(.67)
55
(25.0)
B2016
4
(101.6)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
57
(25.8)
B2054
41/8”
(104.8)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
61
(27.7)
B2055
41/4”
(107.9)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
62
(28.1)
B2056
43/8”
(111.1)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
64
(29.0)
B2017
41/2”
(114.3)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
66
(29.9)
B2058
45/8”
(117.5)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
66
(29.9)
Reference page 126 for general fitting and standard finish specifications.
130
Strut Systems
Pipe Clamps B2000 SERIES O.D. PIPE AND CONDUIT CLAMPS • • • • •
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Other sizes available upon request Includes Combination Recess Hex Head Machine Screw and Square Nut. Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 Design Load 1 • Standard finishes: ZN, HDG, SS4 O.D.
O.D.
Design Load 2 Design Load 3
Part No. B2059 B2060 B2018 B2062 B2063 B2064 B2019 B2066 B2067 B2068 B2069 B2110 B2111 B2112 B2113 B2020 B2115 B2116 B2117 B2118 B2119 B2120 B2121 B2021 B2123 B2124 B2125 B2126 B2127 B2128 B2129 B2022 B2130 B2132
O.D. Size (in.)
Hardware Size
43/4”
(120.6)
5/16”-18
47/8” 5 51/8” 51/4” 53/8” 51/2” 55/8” 53/4” 57/8” 6” 61/8” 61/4” 63/8” 61/2” 65/8” 63/4” 67/8” 7” 71/8” 71/4” 73/8” 71/2” 75/8” 73/4” 77/8” 8” 81/8” 81/4” 83/8” 81/2” 85/8” 103/4” 123/4”
(123.8)
5/16”-18
(127.0)
5/16”-18
(130.2)
5/16”-18
(133.3)
5/16”-18
(136.5)
5/16”-18
(139.7)
5/16”-18
(142.9)
5/16”-18
(146.0)
5/16”-18
(149.2)
5/16”-18
(152.4)
5/16”-18
(155.6)
3/8”-16
(158.7)
3/8”-16
(161.9)
3/8”-16
(165.1)
3/8”-16
(168.3)
3/8”-16
(171.4)
3/8”-16
(174.6)
3/8”-16
(177.8)
3/8”-16
(181.0)
3/8”-16
(184.1)
3/8”-16
(187.3)
3/8”-16
(190.5)
3/8”-16
(193.7) (196.8)
3/8”-16
(200.0)
3/8”-16
(203.2)
3/8”-16
(206.4)
3/8”-16
(209.5)
3/8”-16
(212.7)
3/8”-16
(215.9)
3/8”-16
(219.1)
3/8”-16
(273.0)
3/8”-16
(323.8)
3/8”-16
3/8”-16
Material Design Load 1 Design Load 2 Design Load 3 Gauge Thickness Lbs. kN Lbs. kN Lbs. kN 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11
(3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0)
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
(4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45)
200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250
(.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11)
150 150 150 150 150 150 150 150 150 150 150 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Reference page 126 for general fitting and standard finish specifications. Strut Systems
131
(.67) (.67) (.67) (.67) (.67) (.67) (.67) (.67) (.67) (.67) (.67) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89)
Wt./C Lbs.
kg
68 69 70 70 70 77 78 83 84 85 87 94 96 98 99 100 102 104 106 108 110 112 114 115 117 119 121 123 125 126 128 128 160 185
(30.8) (31.3) (31.8) (31.8) (31.8) (34.9) (35.4) (37.6) (38.1) (38.6) (39.5) (42.6) (43.5) (44.4) (44.9) (45.4) (46.3) (47.2) (48.1) (49.0) (49.9) (50.8) (51.7) (52.2) (53.1) (54.0) (54.9) (55.8) (56.7) (57.2) (58.1) (58.1) (72.6) (83.9)
Pipe/Conduit Clamps & Hangers
O.D. CLAMPS
Pipe Clamps B1508 THRU B1564S
Design Load
CONDUIT/STRUT CLAMPS • Safety Factor of 3 • Clamps without saddles are not recommended for flexible conduit or cable • All Sizes Include: 1/4”-20 Slotted Hex Head Machine Screw • Standard finish: ZN
Setscrew
Pipe/Conduit Clamps & Hangers
Thickness
B1508S THRU B1524S B1508 THRU B1520 B1532S THRU B1564S
Part No. B1508 B1512 B1516 B1520 B1508S B1512S B1516S B1520S B1524S B1532S B1534S B1540S B1548S B1556S B1564S
EMT
Use With Rigid Conduit
1/2”
(15)
–
–
3/4”
(20)
1/2”
(15)
1” 11/4” 1/2” 3/4” 1” 1 1 /4” 11/2” 2” – 21/2” 3” 31/2” 4”
(25)
3/4”
(20)
(32)
1” – 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4”
(25)
(15) (20) (25) (32) (40) (50)
– (65) (80) (90) (100)
– (15) (20) (25) (32) (40) (50) (65) (80) (90) (100)
Design Load Thickness 16 16 14 14 16 16 14 14 12 12 12 12 12 12 12
Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga.
(1.5) (1.5) (1.9) (1.9) (1.5) (1.5) (1.9) (1.9) (2.6) (2.6) (2.6) (2.6) (2.6) (2.6) (2.6)
Lbs.
200 200 300 300 200 200 300 300 400 400 400 400 400 400 400
Wt./C
kN
Lbs.
kg
(.89)
7.4 8.0 11.0 12.5 8.6 9.2 12.7 14.6 20.5 21.5 22.7 26.0 30.2 33.3 36.6
(3.4)
(.89) (1.33) (1.33) (.89) (.89) (1.33) (1.33) (1.78) (1.78) (1.78) (1.78) (1.78) (1.78) (1.78)
(3.6) (5.0) (5.7) (3.9) (4.2) (5.8) (6.6) (9.3) (9.8) (10.3) (11.9) (13.7) (15.1) (16.6)
Reference page 126 for general fitting and standard finish specifications.
132
Strut Systems
Pipe Clamps B2601 THRU B2610 TWIST EAR™ PIPE CLAMP • One piece break apart, screw retainer, thread impressions • Tighter alignment, no need to leave additional space between clamps in order to access nut and bolt • Easier access bolt can be tightened directly from front • Available in 1/2”, 3/4”, 1” rigid and EMT Conduit • Recommended Torque 30 in. - lbs. • Safety Factor of 3 • Standard finish: ZN
Design Load B-Line B26093/4 3/4" ST D
B-Line B26093/4 3/4" ST D
B2601 B2602 B2603 B2608 B2609 B2610
EMT
Use With Rigid Conduit
1/2”
(17.9)
3/4”
(23.4)
1” – – –
(29.5)
– – – 1/2” 3/4” 1”
– – –
– – – (21.3) (26.7) (33.4)
Break-apart - break in the middle, bolt the ends together.
Design Load Thickness 16 14 14 16 14 14
Lbs.
Ga. Ga. Ga. Ga. Ga. Ga.
300 500 500 300 500 500
Wt./C
kN
Lbs.
kg
(1.34)
8.2 13.5 15.6 8.2 13.5 15.6
(3.7)
(2.24) (2.24) (1.34) (2.24) (2.24)
BP081SS THRU BP475SS
No loose pieces. One piece break apart with screw retainer and thread impressions.
(6.1) (7.1) (3.7) (6.1) (7.1)
Design Load
P CLAMPS • Minimizes induction heating • Material: Stainless Steel Type 304
Setscrew
W O.D. Size
H 14 Gauge
O.D. Size Part No. BP081SS BP110SS BP135SS BP175SS BP205SS BP250SS BP300SS BP325SS BP375SS BP425SS BP475SS
In.
mm
.250-.840 (6.4-21.3) .810-1.100 (20.6-28.0) .850-1.350 (21.6-34.8) 1.250-1.750 (31.8-44.4) 1.550-2.050 (39.4-52.1) 2.00-2.50 (50.8-63.5) 2.55-3.00 (64.7-76.2) 2.75-3.25 (69.9-82.8) 3.25-3.75 (82.6-95.3) 3.75-4.25 (95.3-108.0) 4.25-4.75 (108.0-120.7)
Height H
Width W
Design Load
Wt/C.
In.
mm
In.
mm
Lbs.
kN
Lbs.
kg
1.86 2.18 2.25 2.78 3.00 3.43 3.87 4.06 4.60 5.13 5.70
(47.2) (55.4) (57.2) (70.6) (76.2) (87.1) (97.8) (103.1) (116.8) (130.3) (5.70)
0.87 1.19 1.38 1.78 2.28 2.83 3.15 3.28 3.83 4.50 4.85
(22.1) (30.2) (35.1) (45.2) (57.9) (71.9) (80.0) (83.3) (97.3) (114.3) (123.2)
300 300 300 300 300 300 300 300 300 300 300
(1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33)
9.0 12.0 14.0 21.0 30.0 35.0 39.0 41.0 47.0 54.0 58.0
(4.1) (5.4) (6.3) (9.5) (13.6) (15.9) (17.7) (18.6) (21.3) (24.4) (26.3)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
133
Pipe/Conduit Clamps & Hangers
Allows for multiple clamps to be used in succession, with easier access than other pipe clamps.
Part No.
B-Line B26093/4 3/4" ST D
B-Line B26093/4 3/4" STD
VibraClamp™ Pipe Clamps Design Load 1
BVT SERIES VIBRACLAMP - COPPER & O.D. • • • • • • • • • • • •
Safety Factor of 3 Accesses tubing sizes 1/8” (3) to 6” (150) Allows easy one tool installation Endures both high (+300°F) and low (-40°F) temperatures Dampens vibration and noise Eliminates galvanic metal to metal contact Resists most industrial oils and solvents Reduces thermal loss and gain Secures tubing firmly to channel (strut) Dielectric strength of 400 volts/mil Includes cushion, clamp, screw and nut Standard finishes: YZN, SS4
Pipe/Conduit Clamps & Hangers
Catalog Number BVT025 BVT037 BVT050 BVT062 BVT075 BVT087 BVT100 BVT112 BVT125 BVT137 BVT150 BVT162 BVT175 BVT187 BVT200 BVT212 BVT225 BVT250 BVT262 BVT300 BVT312 BVT362 BVT412 BVT612 Catalog Number
Tubing O.D. Size 1/4” 3/8” 1/2” 5/8” 3/4” 7/8”
1” 11/8” 11/4” 13/8” 11/2” 15/8” 13/4” 17/8” 2” 21/8” 21/4” 21/2” 25/8” 3” 31/8” 35/8” 41/8” 61/8”
Design Load 1 Lbs.
BVT025 BVT037 BVT050 BVT062 BVT075 BVT087 BVT100 BVT112 BVT125 BVT137 BVT150 BVT162 BVT175 BVT187 BVT200 BVT212 BVT225 BVT250 BVT262 BVT300 BVT312 BVT362 BVT412 BVT612
(6.3) (9.5) (12.7) (15.9) (19.0) (22.2) (25.4) (28.6) (31.7) (34.9) (38.1) (41.3) (44.4) (47.6) (50.8) (54.0) (57.1) (63.5) (66.6) (76.2) (79.4) (92.1) (104.8) (155.5)
400 400 400 400 600 600 600 600 600 600 600 800 800 800 800 800 800 800 800 800 800 1000 1000 1000
kN (1.78) (1.78) (1.78) (1.78) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45)
Copper Tubing Size 1/8” 1/4” 3/8” 1/2” 5/8” 3/4”
– 1” – 11/4” – 11/2” – – – 2” – – 21/2” – 3” 31/2” 4” 6”
(3) (6) (10) (15) (17) (20)
– (25)
– (32)
– (40)
– – – (50)
– – (65)
– (80) (90) (100) (150)
Design Load 2
A B C Dimensions B
A 1.22 1.36 1.49 1.62 1.87 2.00 2.25 2.25 2.51 2.51 2.74 3.00 3.13 3.28 3.52 3.52 3.64 3.91 4.02 4.42 4.53 5.05 5.55 7.62
(30.9) (34.5) (37.8) (41.1) (47.4) (50.8) (57.1) (57.1) (63.7) (63.7) (69.6) (76.2) (79.5) (83.3) (89.4) (89.4) (92.4) (99.3) (102.1) (112.2) (115.0) (128.2) (140.9) (193.5)
Design Load 2
Design Load 3
Lbs.
Lbs.
50 50 50 50 75 75 75 75 75 75 75 125 125 125 125 125 125 125 125 125 125 200 200 200
kN (0.22) (0.22) (0.22) (0.22) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.89) (0.89) (0.89)
50 50 50 50 75 75 75 75 75 75 75 125 125 125 125 125 125 125 125 125 125 150 150 150
Design Load 3
0.19 0.25 0.31 0.38 0.50 0.56 0.69 0.69 0.81 0.81 0.88 1.00 1.06 1.13 1.25 1.25 1.31 1.43 1.50 1.68 1.75 2.00 2.25 3.25
(4.8) (6.3) (7.8) (9.6) (12.7) (14.2) (17.5) (17.5) (20.6) (20.6) (22.4) (25.4) (26.9) (28.7) (31.7) (31.7) (33.2) (36.3) (38.1) (42.6) (44.4) (50.8) (57.1) (82.5)
Wt./C C
Lbs.
kg
0.49 (12.4) 0.61 (15.5) 0.74 (18.8) 0.86 (21.8) 1.15 (29.2) 1.27 (32.2) 1.52 (38.6) 1.52 (38.6) 1.78 (45.2) 1.78 (45.2) 1.96 (49.8) 2.20 (55.9) 2.33 (59.1) 2.46 (62.5) 2.70 (68.6) 2.70 (68.6) 2.83 (71.8) 3.11 (79.0) 3.20 (81.3) 3.61 (91.6) 3.70 (93.9) 4.23 (107.4) 4.73 (120.1) 6.74 (171.1)
11 12 14 15 19 21 22 26 36 38 35 40 44 40 55 55 54 56 55 67 64 76 93 136
(5.0) (5.4) (6.3) (6.8) (8.6) (9.5) (10.0) (11.8) (16.3) (17.2) (15.9) (18.1) (19.9) (18.1) (25.0) (25.0) (24.5) (25.4) (25.0) (30.4) (29.0) (34.5) (42.2) (61.6)
kN (0.22) (0.22) (0.22) (0.22) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.67) (0.67) (0.67)
Reference page 126 for general fitting and standard finish specifications.
134
Strut Systems
VibraClamp™ Pipe Clamps BVP SERIES VIBRACLAMP - IRON PIPE & RIGID CONDUIT • • • • • • • • • • • •
Safety Factor of 3 Accesses pipe sizes 1/4” (6) to 6” (150) Allows easy one tool installation Endures both high (+300°F) and low (-40°F) temperatures Dampens vibration and noise Eliminates galvanic metal to metal contact Resists most industrial oils and solvents Reduces thermal loss and gain Secures pipe firmly to channel (strut) Dielectric strength of 400 volts/mil Includes cushion, clamp, screw and nut Standard finishes: YZN, SS4
Design Load 1
Design Load 2
A Design Load 3
B C
BVP025 BVP037 BVP050 BVP075 BVP100 BVP125 BVP150 BVP200 BVP250 BVP300 BVP350 BVP400 BVP500 BVP600
Catalog Number
Nominal Pipe Size 1/4” 3/8” 1/2” 3/4”
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6”
Design Load 1 Lbs.
BVP025 BVP037 BVP050 BVP075 BVP100 BVP125 BVP150 BVP200 BVP250 BVP300 BVP350 BVP400 BVP500 BVP600
(6.3) (9.5) (12.7) (19.0) (25.4) (31.7) (38.1) (50.8) (63.5) (76.2) (88.9) (101.6) (127.0) (152.4)
400 600 600 600 600 800 800 800 800 1000 1000 1000 1000 1000
kN (1.78) (2.67) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45) (4.45) (4.45)
Steel O.D. Size 0.540 0.675 0.875 1.050 1.312 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625
(13.7) (17.1) (22.2) (26.7) (33.3) (42.2) (48.3) (60.3) (73.0) (88.9) (101.6) (114.3) (141.3) (168.3)
Dimensions B
A 1.61 1.86 1.99 2.25 2.51 3.00 3.21 3.77 4.28 5.05 5.55 6.05 6.84 8.24
(39.9) (47.2) (50.5) (57.1) (63.8) (76.2) (83.1) (95.8) (108.7) (128.3) (140.9) (153.7) (173.7) (209.3)
Design Load 2
Design Load 3
Lbs.
Lbs.
50 75 75 75 75 125 125 125 125 200 200 200 200 200
kN (0.22) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.89) (0.89) (0.89) (0.89) (0.89)
50 75 75 75 75 125 125 125 125 150 150 150 150 150
0.37 0.50 0.56 0.69 0.81 1.00 1.12 1.37 1.62 2.00 2.25 2.50 3.00 3.56
(9.4) (12.7) (14.2) (17.5) (20.6) (25.4) (28.4) (34.8) (41.1) (50.8) (57.1) (63.5) (76.2) (90.4)
C 0.87 1.15 1.27 1.52 1.77 2.21 2.41 2.96 3.46 4.24 4.74 5.24 6.24 7.36
(22.1) (29.2) (32.3) (38.6) (45.0) (56.1) (62.3) (75.2) (87.9) (107.7) (120.3) (133.1) (158.4) (186.9)
kN (0.22) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.67) (0.67) (0.67) (0.67) (0.67)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
135
Wt./C Lbs.
kg
15 18 20 21 20 36 40 45 54 81 87 109 136 163
(6.8) (8.2) (9.1) (9.5) (9.1) (16.3) (18.1) (20.4) (24.5) (36.7) (39.4) (49.4) (61.6) (73.8)
Pipe/Conduit Clamps & Hangers
Catalog Number
Armafix™ Clamps & Accessories IPH SERIES
Pipe/Conduit Clamps & Hangers
INSERTS - INSERTS WITH CLAMPS • Engineered load-bearing inserts prevents insulation compression 1/2” Wall Insulation Thickness • Innovative insulated pipe support • Desirable “Foam-to-Foam” Bond Assembly Insert Only Pipe/Copper/OD Hanger • Slip Data: 45 lbs. (0.20 kN) max Part No. Part No. Size Size* • Recommended Clamp Torque: 12-15 in-lbs. (1.3-1.7 Nm) 3 /8” O.D. 11/4” IPH03812 IPH03812WO • Service Temperature Range 1/2” O.D. 11/4” IPH01212 IPH01212WO -58°F (-50°C) to +220°F (+105°C) 5/8” O.D. 11/2” IPH05812 IPH05812WO 3/4” O.D. 11/2” IPH03412 IPH03412WO 7/8” O.D. 2” IPH07812 IPH07812WO 2” IPH11812 IPH11812WO 3/4” IPS & 11/8” O.D. 21/2” IPH13812 IPH13812WO 13/8” O.D. 5 21/2” IPH15812 IPH15812WO 1 /8” O.D. 1 7 3” IPH11012 IPH11012WO 1 /2” IPS & 1 /8” O.D. 3” IPH21812 IPH21812WO 21/8” O.D. 5 1 / 8 ” O.D. 3 /2” IPH25812 IPH25812WO 2 Insert Only Assembly Insert & Clamp 4” IPH31812 IPH31812WO 31/8” O.D. 5” IPH35812 IPH35812WO 35/8” O.D. 6” IPH41812 IPH41812WO 41/8” O.D. 3/4” Wall Insulation Thickness IPH40012 IPH40012WO 4” IPS 6” IPH50012 IPH50012WO 5” IPS 8” Assembly Insert Only Pipe/Copper/OD Hanger IPH60012 IPH60012WO 6” IPS 8” Part No. Part No. Size Size* IPH03834 IPH01234 IPH05834 IPH07834 IPH11834 IPH13834 IPH15834 IPH11034 IPH21834 IPH25834 IPH31834 IPH35834 IPH41834 IPH40034 IPH50034 IPH60034 IPH80034
3/8” O.D. IPH03834WO 1/2” O.D. IPH01234WO 5/8” O.D. IPH05834WO 7/8” O.D. IPH07834WO 3 IPH11834WO /4” IPS & 11/8” O.D. IPH13834WO 13/8” O.D. IPH15834WO 15/8” O.D. IPH11034WO 11/2” IPS & 17/8” O.D. IPH21834WO 21/8” O.D. IPH25834WO 25/8” O.D. IPH31834WO 31/8” O.D. IPH35834WO 35/8” O.D. IPH41834WO 41/8” O.D. IPH40034WO 4” IPS IPH50034WO 5” IPS IPH60034WO 6” IPS IPH80034WO 8” IPS
* Recommended pipe hanger size for insulation thickness shown. (Order hanger separately)
2” 2” 2” 21/2” 21/2” 3” 31/2” 31/2” 4” 5” 5” 6” 6” 6” 8” 10” 12”
1” Wall Insulation Thickness Assembly Part No. IPH05810 IPH03410 IPH07810 IPH11810 IPH13810 IPH15810 IPH11010 IPH21810 IPH25810 IPH31810 IPH35810 IPH41810 IPH40010 IPH50010 IPH60010 IPH80010
* Recommended pipe hanger size for insulation thickness shown. (Order hanger separately)
IPH18230 ARMAFLEX®† INSUALTION TAPE • 30 ft. (9.14 M) roll
Insert Only Pipe/Copper/OD Hanger Part No. Size Size* 5/8” O.D. IPH05810WO 21/2” 3 /4” O.D. 21/2” IPH03410WO 7 /8” O.D. 3” IPH07810WO 3” IPH11810WO 3/4” IPS & 11/8” O.D. 31/2” IPH13810WO 13/8” O.D. 31/2” IPH15810WO 15/8” O.D. 4” IPH11010WO 11/2” IPS & 17/8” O.D. 4” IPH21810WO 21/8” O.D. 5” IPH25810WO 25/8” O.D. 5” IPH31810WO 31/8” O.D. 6” IPH35810WO 35/8” O.D. 6” IPH41810WO 41/8” O.D. IPH40010WO 4” IPS 8” IPH50010WO 5” IPS 8” IPH60010WO 6” IPS 10” IPH80010WO 8” IPS 12”
* Recommended pipe hanger size for insulation thickness shown. (Order hanger separately)
†Armaflex® is a registared trademark of Armacell.
Reference page 126 for general fitting and standard finish specifications.
136
Strut Systems
Virba Cushion™ Accessories B1999
FEATURES
VIBRA CUSHION™
Vibra Cushion™ is designed for use with refrigeration lines, HVAC, copper tubing, glass pipe and hydraulic lines. It provides an energy-absorption barrier between the lines and the mounting material and remains flexible thru its entire service range of -75°F (-60°C) to +375°F (+199°C).
• • • • •
Packaged 20 Ft. (6.09 m) per carton Ideal Isolation Material Inhibits Galvanic Corrosion Dampens Sound and Vibrations Service Temperature Range -75°F (-60°C) to +375°F (+199°C) • Wt./Carton 3.8 Lbs. (1.7 kg)
This elastomer allows for expansion and contraction within the mounting system and prevents galvanic reaction between dissimilar metals.
FOR RIGID CONDUIT OR IRON PIPE Nominal Size 3/8” (10) 1/2” (15) 3/4” (20) 1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100) 5” (125) 6” (150)
15/8” (41.3)
Length of Use Vibra-Cushion Clamp No. 21/8” (54.0) B2002 25/8” (66.7) B2009 31/4” (82.5) B2031 41/8” (104.8) B2004 53/16” (131.8) B2012 515/16” (150.8) B2038 71/2” (190.5) B2042 9” (228.6) B2046 11” (279.4) B2051 121/2” (317.5) B2055 141/2” (368.3) B2059 177/16” (442.9) B2067 203/4” (527.0) B2116
FOR THINWALL (EMT) CONDUIT Nominal Size
Length of Use Vibra-Cushion Clamp No.
3/8” (10) 1/2” (15)
113/16” (46.0) 213/16” (58.7) 27/8” (73.0) 35/8” (92.1) 43/8” (120.6) 57/16” (138.1) 67/8” (174.6)
3/4” (20)
1” 11/4” 11/2” 2”
(25) (32) (40) (50)
B2027 B2002 B2003 B2032 B2036 B2012 B2013
• • • • •
Non-adhesive rubber tape Fuses to itself Water resistant Ideal Isolation Material Prevents galvanic reaction caused by dissimilar metal contact • Temperature Range -140°F (-60°C) to +395°F (+200°C)
• Fits securely in 15/8” wide channel • Temperature range: -20°F to 212°F • Ideal Isolation & Vibration Dampening Qualities • 45 durometer hardness • Material: Neoprene
1” (25.4)
ISO
Thickness
Length of Use Vibra-Cushion Clamp No. 13/16” (30.2) B2026 19/16” (39.7) B2027 17/8” (47.6) B2008 25/16” (58.7) B2029 23/4” (69.8) B2030 31/2” (88.9) B2032 45/16” (109.5) B2011 51/8” (130.2) B2036 611/16” (169.9) B2013 81/4” (209.5) B2014 913/16” (249.2) B2048 113/8” (288.9) B2052 1215/16” (328.6) B2056 161/8” (409.6) B2064 191/4” (488.9) B2112 251/2” (647.7) B2128
BVS Type - Vibra Strip™ for 15/8" (41.3) wide B-Line channel
ISO PIPE
Part No.
Nominal Size 1/4” (6) 3/8” (10) 1/2” (15) 5/8” (17) 3/4” (20) 1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100) 5” (125) 6” (150) 8” (200)
Ft./Roll
In.
mm
Ft.
m
Part No.
.020
(0.5)
36
(11)
BVS-12 BVS-120
Max. Load Lbs. per Lineal In. Lbs. kg/25.4 mm 40 40
(18.1) (18.1)
Length 12” (304.8) 120” (3048.0)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
137
Wt. Std. Each Pkg. Lbs. kg 25 25
.46 (.21) 4.60 (2.08)
Pipe/Conduit Clamps & Hangers
FOR COPPER TUBING TYPE L & K
Pipe Clamps Design Load 1
B2400 SERIES STANDARD PIPE STRAP
Pipe Size
• • • • •
Safety Factor of 5 B2400-3/4 thru B2400-8 are UL listed Order hardware separately Other sizes available upon request Material: Sizes - 1/2” - 11/2”, ASTM A1011 33,000 PSI min. yield; 2” - 12”, ASTM A1018 33,000 PSI min. yield; Design Load 14”-Larger, ASTM A36 3 • Standard finish: ZN • Ductile Iron Sizes Available • Meets requirements of MSS SP-58 & SP-69 Type 26
Pipe/Conduit Clamps & Hangers
Part No. B2400-1/2 B2400-3/4 B2400-1 B2400-11/4 B2400-11/2 B2400-2 B2400-21/2 B2400-3 B2400-31/2 B2400-4 B2400-5 B2400-6 B2400-8 B2400-10 B2400-12 B2400-14 B2400-16 B2400-18 B2400-20 B2400-24 Part No.
B2400-1/2 B2400-3/4 B2400-1 B2400-11/4 B2400-11/2 B2400-2 B2400-21/2 B2400-3 B2400-31/2 B2400-4 B2400-5 B2400-6 B2400-8 B2400-10 B2400-12 B2400-14 B2400-16 B2400-18 B2400-20 B2400-24
Pipe Size 1/2” 3/4”
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) (350) (400) (460) (510) (610)
A 5/16” 5/16” 5/16” 5/16” 5/16” 7/16” 7/16” 7/16” 7/16” 9/16” 9/16” 9/16” 9/16” 9/16” 9/16” 15/16” 15/16” 15/16” 15/16” 15/16”
Design Load 1
B (7.9) (7.9) (7.9) (7.9) (7.9) (11.1) (11.1) (11.1) (11.1) (14.3) (14.3) (14.3) (14.3) (14.3) (14.3) (23.8) (23.8) (23.8) (23.8) (23.8)
7/16” 7/16” 7/16” 7/16” 7/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16”
11/2” 11/2” 13/4” 13/4” 13/4”
Hole Size
A C B W
C 213/16” 3” 317/32” 33/4” 41/16” 521/32” 65/32” 625/32” 79/32” 725/32” 87/8” 915/16” 1131/32” 14” 16” 203/4” 223/4” 27” 29” 33”
(11.1) (11.1) (11.1) (11.1) (11.1) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (38.1) (38.1) (44.4) (44.4) (44.4)
Design Load 2
T (71.4) (76.2) (89.7) (95.2) (103.2) (143.6) (156.3) (172.2) (184.9) (197.6) (225.4) (252.4) (304.0) (355.6) (406.4) (527.0) (577.8) (685.8) (736.6) (838.2)
T
10 10 10 10 10
Ga. Ga. Ga. Ga. Ga. 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 3/8” 3/8” 1/2” 1/2” 1/2”
Design Load 3
Design Load 2
W (3.4) (3.4) (3.4) (3.4) (3.4) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (9.5) (9.5) (12.7) (12.7) (12.7)
15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 13/4” 13/4” 13/4” 13/4” 13/4”
(41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (44.4) (44.4) (44.4) (44.4) (44.4)
Wt./C
Lbs.
kN
Lbs.
kN
Lbs.
kN
Lbs.
600 600 600 600 600 1200 1200 1200 1200 1500 1500 1500 2000 2000 2000 2000 2000 2000 2000 2000
(2.67) (2.67) (2.67) (2.67) (2.67) (5.34) (5.34) (5.34) (5.34) (6.67) (6.67) (6.67) (8.90) (8.90) (8.90) (8.90) (8.90) (8.90) (8.90) (8.90)
150 150 150 150 150 480 480 480 480 600 600 600 800 800 800 800 800 800 800 800
(.67) (.67) (.67) (.67) (.67) (2.14) (2.14) (2.14) (2.14) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56)
105 105 120 120 120 180 180 300 300 450 450 450 600 600 600 600 600 600 600 600
(.47) (.47) (.53) (.53) (.53) (.80) (.80) (1.33) (1.33) (2.00) (2.00) (2.00) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67)
23 26 31 36 39 93 106 132 151 160 192 219 297 465 560 761 861 1297 1426 1682
kg (10.4) (11.8) (14.0) (16.3) (17.7) (42.2) (48.1) (59.9) (68.5) (72.6) (87.1) (99.3) (134.7) (210.9) (254.0) (345.2) (390.5) (588.3) (646.8) (762.9)
Reference page 126 for general fitting and standard finish specifications.
138
Strut Systems
Pipe Clamps B437 SERIES TWO PIECE PIPE STRAP • Clamp halves can turn allowing pipe to be fastened to channel at any direction • Order hardware separately • Standard finish: ZN Wt./C Part No.
1/2”
(15)
3/4”
(20)
1”
(25)
11/4”
(32)
11/2”
(40)
2” 21/2” 3” 31/2” 4” 5” 6” 8”
(50)
A 5
/16” /16” 5 /16” 5 /16” 5 /16” 7 /16” 7 /16” 7 /16” 7 /16” 9 /16” 9 /16” 9 /16” 9 /16” 5
(65) (80) (90) (100) (125) (150) (200)
T (7.9) (7.9) (7.9) (7.9) (7.9)
10 10 10 10 10
(11.1) (11.1) (11.1) (11.1) (11.1) (11.1) (11.1) (11.1)
Ga. Ga. Ga. Ga. Ga. 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”
(3.4) (3.4) (3.4) (3.4) (3.4) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3)
Lbs.
kg
22 26 30 35 38 91 104 130 149 158 190 217 295
(10.0)
T
(11.8) (13.6) (15.9)
Hole Size
(17.2)
A
(41.3) (47.2) (58.9) (67.6) (71.6) (86.2) (98.4) (133.8)
B2417 STRUT MOUNTED PIPE GUIDE
14 Gauge (1.9)
• Copper tubing sizes available - B2417CT Series • Standard finish: ZN Minimum Part No. B2417-1/2 B2417-3/4 B2417-1 B2417-11/4 B2417-11/2 B2417-2 B2417-21/2 B2417-3 B2417-31/2
Pipe Size 1
/2" /4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 3
Includes
Radial Clearance Clamp No.
(15)
1
(1.6)
(20)
1
(1.6)
/16" /16" 3 /32" 3 /32" 3 /32" 1 /8" 1 /8" 5 /32" 5 /32"
(25) (32) (40) (50) (65) (80) (90)
(2.3) (2.3) (2.3) (3.2) (3.2) (3.9) (3.9)
Pipe/Conduit Clamps & Hangers
B437-1/2 B437-3/4 B437-1 B437-11/4 B437-11/2 B437-2 B437-21/2 B437-3 B437-31/2 B437-4 B437-5 B437-6 B437-8
Pipe Size
B2009 B2010 B2034 B2037 B2039 B2043 B2047 B2016 B2017
Wt./C Lbs.
kg
22 25 30 47 51 62 69 108 118
(10.0) (11.3) (13.6) (21.8) (23.1) (28.1) (31.3)
Clearance
(49.0) (53.5)
B2070 THRU B2080 PARALLEL PIPE CLAMP • Safety Factor of 2 • Designed to support pipe or rigid conduit • Includes: 1 pr. Pipe Clamps 1 pc. Stand Off Plate 1 pc. Slotted Hex Head Machine Screws Pipe 1 pc. Square Nut Size • Standard finish: ZN A dimension, from bottom of channel to center of pipe.
A
Design Load
Part No. B2070 B2071 B2072 B2073 B2074 B2075 B2076 B2077 B2078 B2079 B2080
Pipe Size 3/8” (10) 1/2” (15) 3/4” (20) 1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100)
A 111/16” 13/4” 17/8” 2” 23/16” 25/16” 29/16” 27/8” 33/16” 37/16” 35/8”
(42.9) (44.4) (47.6) (50.8) (55.6) (58.7) (65.1) (73.0) (80.9) (87.3) (92.1)
Material Design Load Thickness Lbs. kN 16 Ga. (1.5) 300 (1.33) 16 Ga. (1.5) 300 (1.33) 14 Ga. (1.9) 300 (1.33) 14 Ga. (1.9) 400 (1.78) 14 Ga. (1.9) 400 (1.78) 12 Ga. (2.6) 500 (2.22) 12 Ga. (2.6) 500 (2.22) 12 Ga. (2.6) 500 (2.22) 12 Ga. (2.6) 500 (2.22) 11 Ga. (3.0) 500 (2.22) 11 Ga. (3.0) 500 (2.22)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
139
Wt./C Lbs.
kg
24 26 30 33 36 50 55 60 66 85 95
(10.9) (11.8) (13.6) (14.9) (16.3) (22.7) (24.9) (27.2) (29.9) (38.5) (43.1)
Pipe Clamps B670 SERIES
B671 SERIES
PARALLEL PIPE CLAMP
EDGE PIPE CLAMP
• Designed to support pipe or rigid conduit parallel to the edge of a beam or angle iron • Hardware included • Material: Malleable Iron • Standard finish: HDG
• Designed to support pipe or rigid conduit perpendicular to the edge of a beam or angle iron • Hardware included • Material: Malleable Iron • Standard finish: HDG
Pipe/Conduit Clamps & Hangers
Part Number
Pipe or Conduit Wt./C Size Lbs. kg
B670-3/8 B670-1/2 B670-3/4 B670-1 B670-11/4 B670-11/2 B670-2 B670-21/2 B670-3 B670-31/2 B670-4
3/8”
32 58 64 70 77 93 105 143 164 190 205
(10) (15) (20) (25) (32) (40) (50) (65) (80) (90) (100)
1/2” 3/4”
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4”
(14.5) (26.3) (29.0) (31.7) (34.9) (42.2) (47.6) (64.8) (74.4) (86.2) (93.0)
Part Number
Pipe or Conduit Wt./C Size Lbs. kg
B671-1/2 B671-3/4 B671-1 B671-11/4 B671-11/2 B671-2 B671-21/2 B671-3
1/2”
(15) (20) (25) (32) (40) (50) (65) (80)
3/4”
1” 11/4” 11/2” 2” 21/2” 3”
67 71 85 91 115 135 183 230
(30.4) (32.2) (38.5) (41.3) (52.1) (61.2) (83.0) (104.3)
B422 SERIES RIGHT ANGLE CLAMP • Safety Factor of 5 • Material: 7 Gauge (4.5) • Standard finishes: ZN, SS4
Part No. B422-1/2 B422-3/4 B422-1 B422-11/4 B422-11/2 B422-2 B422-21/2 B422-3 B422-31/2 B422-4
Design Load Vertical Pull
Conduit Size 1/2” 3/4”
1” 11/4” 11/2” 2 21/2” 3” 31/2” 4”
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100)
A 23/8” 23/8” 27/8” 27/8” 31/4” 311/16” 41/4” 47/8” 57/16” 6”
(60.3) (60.3) (73.0) (73.0) (82.5) (93.7) (107.9) (123.8) (138.1) (152.4)
Lbs.
kg
Lbs.
kg
250 300 400 400 500 600 700 800 900 1000
(1.11) (1.33) (1.78) (1.78) (2.22) (2.67) (3.11) (3.56) (4.00) (4.45)
38 39 48 50 59 75 98 111 123 135
(17.2) (17.7) (21.8) (22.7) (26.7) (34.0) (44.4) (50.3) (55.8) (61.2)
3/8” (9.5)
B3367S
RETAINING STRAP
x 1/2”
A
Wt./C
B3367S-1
U-Bolt and Hex Nuts Design Load Vertical Pull
13 Gauge (2.3)
(12.7)
Slots
• Available in ‘L’ lengths of 6” (152.4), 8” (203.2), 9” (228.6), 10” (254,0), 12” (304.8), 14” (355.6), 16” (406.4), 18” (457.2) • Material: Steel • Standard finishes: ZN, PLN
L 21/4” (57.1)
Part No. B3367S-1-L B3367S-2-L
Hole Dia. D
For Use With
7/16” (30.1) 9/16” (30.1)
B422-1/2 & 3/4 B422-1, 11/4 & 11/2
Wt./C** Lbs.
kg
3/8” Dia. (19.0)
33.4 (5.8) 12.8 (15.1)
B3367S-2 12 Gauge (2.6)
3
/4” ** Wt./C based on 6” (152.4) length. For each additional inch (19.0) in strap length add the following to the Wt./C. For B3367S-1 add 5.7 Lbs (2.6 kg) For B3367S-2 add 2.2 Lbs (1.0 kg) Note: Use Fig. 69 (Old B3367-3/8 retaining strap, page 115) for B422-2 thru 4
L
Reference page 126 for general fitting and standard finish specifications.
140
Strut Systems
Pipe Clamps B2301 SERIES ONE HOLE EMT STRAP
Hole Dia.
• Standard finish: ZN
W T Part No.
T
1/2”
(15)
3/4”
(20)
1” 1 1 /4” 11/2” 2”
(25)
.050 .050 .050 .065 .090 .090
(32) (40) (50)
Hole Dia.
W
Wt./C
(1.3)
3/4”
(19.0)
9/32”
(7.1)
(1.3)
7/8”
(22.2)
9/32”
(7.1)
(1.3)
1” 1 1 /4” 1” 11/4”
(25.4)
9/32”
(7.1)
(31.7)
9/32”
(7.1)
(25.4)
11/32”
(8.7)
(31.7)
13/32”
(10.3)
(1.6) (2.3) (2.3)
Lbs.
kg
2.4 4.2 8.3 11.0 14.8 21.6
(1.1) (1.9) (3.7) (5.0)
Pipe/Conduit Clamps & Hangers
B2301-1/2 B2301-3/4 B2301-1 B2301-11/4 B2301-11/2 B2301-2
Conduit Size
(6.7) (9.8)
B2302 SERIES ONE HOLE RIGID CONDUIT/PIPE STRAP • Standard finish: ZN Part No.
Conduit/Pipe Size
B2302-1/4
1/4”
(6)
B2302-3/8 B2302-1/2 B2302-3/4 B2302-1 B2302-11/4 B2302-11/2 B2302-2 B2302-21/2 B2302-3 B2302-31/2 B2302-4
3/8”
(10)
1/2”
(15)
3/4”
(20)
1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100)
T .045 .050 .050 .050 .065 .065 11 Ga. 11 Ga. 7 Ga. 7 Ga. 1/4” 1/4”
Hole Dia.
W (1.1)
5/8”
(1.3)
3/4”
(1.3)
Wt./C Lbs.
(15.9)
13/64”
(5.1)
(19.0)
9/32”
(7.1)
7/8”
(22.2)
9/32”
(7.1)
(1.3)
7/8”
(22.2)
9/32”
(7.1)
(1.6)
1” 11/4” 1” 1 1 /4” 11/4” 11/4” 11/4” 11/4”
(25.4)
9/32”
(7.1)
(31.7)
21/64”
(8.3)
(25.4)
.380 .389 .665 .650 .622 .630
(9.6)
(1.6) (3.0) (3.0) (4.5) (4.5) (6.3) (6.3)
(31.7) (31.7) (31.7) (31.7) (31.7)
(9.9) (16.9) (16.5) (15.8) (16.0)
1.4 2.4 3.3 3.8 7.2 11.0 19.2 28.8 55.2 68.0 96.0 108.0
kg (.6) (1.1)
Hole Dia.
(1.5) (1.7) (3.2) (5.0)
W
(8.7)
T
(13.0) (25.0) (30.8) (43.5) (49.0)
B2084 THRU B2091 ONE HOLE O.D. TUBING CLAMP • Material: 14 Gauge (1.9) ASTM A1011 33,000 PSI min. yield • Standard finish: ZN
9/32” (7.1) Dia.
Wt./C Part No. B2084 B2085 B2086 B2087 B2088 B2089 B2090 B2091
O.D. Size
A
1/4”
(6.3)
7/8”
(22.2)
5/16”
(7.9)
29/32”
(23.0)
3/8”
(9.5)
31/32”
(24.6)
1/2”
(12.7)
11/16”
(25.9)
5/8”
(15.9) (19.0)
7/8”
(22.2)
1”
(25.4)
13/32” 15/32” 17/32” 19/32”
(27.8)
3/4”
(29.1) (30.7) (32.2)
Lbs.
kg
4.0 4.2 5.2 5.8 7.1 7.7 8.7 10.0
(1.8)
3/8” (9.5)
(1.9)
15/8”
(2.3)
(41.3)
A
(2.6) (3.2) (3.5) (3.9) (4.5)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
141
O.D. Size
Pipe Clamps Design Load
BL1400 SERIES CONDUIT HANGER • • • •
Safety Factor of 3 Unless noted all sizes fit both rigid (R) and thinwall (EMT) conduit Hardware included Standard finishes: ZN, SS4
W
Conduit Size
A T Hole Size B
Part No
Conduit Size
Pipe/Conduit Clamps & Hangers
1/2” BL1400 3/4” BL1410 BL1420 1” BL1425 11/4” EMT BL1430 11/4” R,11/2” EMT BL1440 11/2” R BL1450 2” BL1460 21/2” BL1470 3” 1 BL1480 3 /2” BL1490 4”
Design Load A
B
T
(15)
29/32”
(23.0)
9/32”
(7.1)
(20)
31/32”
(24.6)
9/32”
(7.1)
(25)
11/4”
(31.7)
9/32”
(7.1)
(31.7)
9/32”
(7.1)
(35.7)
9/32”
(8.7)
(41.3)
11/32” (8.7) 11/32” (8.7)
11/4” (32) 113/32” (40) 15/8” (50) 21/16” (65) 21/16” (80) 21/2” (90) 23/4” (100) 31/2” (32)
(47.6) (52.4) (63.5) (69.8) (88.9)
16 16 16 18 18 16 16 16 16 16 16
11/32” (8.7) 11/32” (8.7) 11/32” (8.7) 11/32” (8.7)
B3373 SERIES
Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga.
W
Lbs.
(1.5)
3/4”
(19.0)
(1.5)
3/4”
(19.0)
(1.5)
3/4”
(19.0)
(1.2)
7/8”
(22.2)
(1.2)
7/8”
(22.2)
(1.5)
1” 11/4” 11/4” 11/4” 11/4” 11/4”
(25.4)
(1.5) (1.5) (1.5) (1.5) (1.5)
(31.7) (31.7) (31.7) (31.7) (31.7)
590 590 590 590 590 755 755 755 820 850 1410
Wt./C
kN
Lbs.
kg
(2.62)
6 7 8 10 10 17 25 26 33 36 40
(2.7)
(2.62) (2.62) (2.62) (2.62) (3.36) (3.36) (3.36) (3.65) (3.78) (6.27)
(3.2) (3.6) (4.5) (4.5) (7.7) (11.3) (11.8) (14.9) (16.3) (18.1)
Pipe Size
RISER CLAMP • • • •
Safety Factor of 3.5 B3373-3/4 thru B3373-8 are UL listed Includes Hex Head Cap Screws and Hex Nuts Standard finishes: ZN, PLN
T W
Part No.
Pipe Size
A
Design Load A
B3373-1/2
1/2”
(15)
B3373-3/4 B3373-1 B3373-11/4 B3373-11/2 B3373-2 B3373-21/2 B3373-3 B3373-31/2 B3373-4 B3373-5 B3373-6 B3373-8
3/4”
(20)
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8”
(25) (32) (32) (40) (50) (65) (80) (90) (100) (100) (100)
9” 91/4” 99/16” 10” 101/4” 103/4” 111/4” 1115/16” 123/8” 127/8” 14” 153/16” 173/4”
(228.6) (234.9) (242.9) (254.0) (260.3) (273.0) (285.7) (303.2) (314.3)
(327.0) (355.6) (385.8) (450.8)
Wt./C
Lbs.
kN
Lbs.
kg
255 255 255 255 255 255 390 530 670 810 1160 1570 2500
(1.13)
101 105 109 112 113 165 180 195 217 228 480 526 957
(45.9)
(1.13) (1.13) (1.13) (1.13) (1.13) (1.73) (2.36) (2.98) (3.60) (5.16) (6.98) (11.12)
(47.7) (49.4) (50.9) (51.1) (75.0) (81.6) (88.4) (98.5) (103.5) (217.7) (238.6) (434.1)
Reference page 126 for general fitting and standard finish specifications.
142
Strut Systems
Pipe Clamps B3690 SERIES ADJUSTABLE J HANGER • Safety Factor of 5 • Material: 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield 11 Ga. (3.0) ASTM A1011 HSLA Gr. 50 Class 1 7 Ga. (4.5) ASTM A1011 33,000 PSI min. yield and 1/4” (6.3) ASTM A1018 33,000 PSI min. yield • Standard finish: ZN
A DIA.
‘D’
C
Rod Take-Out
B
‘E’ Diameter. Is For Wall Mounting
TxW
Felt Line B3690F-SIZE
Design Load
Design Load
Part No. B3690-1/2 B3690-3/4 B3690-1 B3690-11/4 B3690-11/2 B3690-2 B3690-21/2 B3690-3 B3690-31/2 B3690-4 B3690-5 B3690-6 B3690-8
Pipe or Conduit Size
A
B
1/2”
(15)
13/32”
(10.3)
3/4”
(20)
13/32”
(10.3)
(25)
13/32”
(32)
13/32”
(40)
13/32”
(50)
13/32”
(10.3)
(65)
9/16”
(14.3)
(80)
9/16”
(14.3)
(90)
9/16”
(14.3)
(100)
11/16”
(17.5)
(125)
11/16”
(150)
13/16”
(200)
13/16”
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8”
(10.3) (10.3) (10.3)
(17.5) (20.6) (20.6)
23/32” 211/32” 219/32” 213/16” 31/16” 31/2” 47/16” 47/8” 53/16” 61/8” 63/4” 73/4” 91/4”
C (53.2) (59.5) (65.9) (71.4) (77.8) (88.9) (112.7) (123.8) (131.8) (155.6) (171.4) (196.8) (235.0)
1” 1” 1” 1” 1” 1” 1” 1” 1” 11/4” 11/2” 13/16” 1”
D
E
F
(25.4) 111/16” (42.5) 13/32”
(10.3) 1/4”-20 x 21/4”
(25.4) 113/16” (46.2) 13/32”
(10.3) 1/4”-20 x 21/2”
115/16” (49.2)
13/32”
(10.3) 1/4”-20 x 23/4”
(50.4)
13/32”
(10.3) 1/4”-20 x 3” (10.3) 1/4”-20 x 31/4”
(25.4) (25.4)
2”
(25.4)
21/8”
(53.7)
13/32”
(25.4)
25/16”
(58.7)
13/32”
(10.3) 1/4”-20 x 31/2”
(25.4)
3” 31/8” 33/16” 37/8” 4” 47/16” 415/16”
(76.2)
9/16”
(14.3) 3/8”-16 x 41/2”
(79.4)
9/16”
(14.3) 3/8”-16 x 5”
(81.0)
9/16”
(14.3) 3/8”-16 x 51/2”
(98.4)
9/16”
(14.3) 3/8”-16 x 61/2”
(100.8)
9/16”
(14.3) 3/8”-16 x 71/2”
(112.7)
9/16”
(14.3) 3/8”-16 x 81/2”
(125.4)
9/16”
(14.3) 3/8”-16 x 101/2”
(25.4) (25.4) (31.8) (38.1) (30.2) (25.4)
Design Load Part No. B3690-1/2 B3690-3/4 B3690-1 B3690-11/4 B3690-11/2 B3690-2 B3690-21/2 B3690-3 B3690-31/2 B3690-4 B3690-5 B3690-6 B3690-8
T 12 Ga. 12 Ga. 12 Ga. 12 Ga. 12 Ga. 12 Ga. 11 Ga. 11 Ga. 11 Ga. 7 Ga. 7 Ga. 1/4” 1/4”
W (2.6)
3/4”
(19.0)
(2.6)
3/4”
(19.0)
(2.6)
3/4”
(19.0)
(2.6)
3/4”
(19.0)
(2.6)
3/4”
(19.0)
(2.6)
3/4”
(19.0)
(3.0)
11/4” 11/4” 11/4” 11/4” 11/4” 11/4” 11/2”
(31.7)
(3.0) (3.0) (4.5) (4.5) (6.3) (6.3)
(31.7) (31.7) (31.7) (31.7) (31.7) (38.1)
Wt./C
Lbs.
kN
Lbs.
kg
400 400 400 400 400 400 800 800 800 800 800 1000 1200
(1.78)
20 23 24 27 29 32 71 77 84 139 166 226 332
(9.1)
(1.78) (1.78) (1.78) (1.78) (1.78) (3.56) (3.56) (3.56) (3.56) (3.56) (4.45) (5.34)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
Pipe/Conduit Clamps & Hangers
Bolt Size ‘F’ And Hex Nut Included
143
(10.4) (10.9) (12.2) (13.1) (14.5) (32.2) (34.9) (38.1) (63.0) (75.3) (102.5) (150.6)
Pipe Hangers Fig. 4B SERIES ( Formerly B386 Series) SUSPENSION ROD PIPE STRAP
C A
• Safety Factor of 3 • Includes Hex Head Cap Screws and Hex Nuts • Standard finishes: ZN, GRN
B D
Design Load
Part No.
Pipe/Conduit Clamps & Hangers
4B-3/4 4B-1 4B-11/4 4B-11/2 4B-2 4B-21/2 4B-3 4B-31/2 4B-4 4B-5 4B-6 4B-8
Pipe Size Rod Size in. (mm) A 3/4"
(20)
3/8"-16
1" 11/4" 11/2" 2" 21/2" 3" 1 3 /2" 4" 5" 6" 8"
(25)
3/8"-16
(32)
3/8"-16
(40)
3/8"-16
(50)
3/8"-16
(65)
1/2"-13
(80)
1/2"-13
(90)
1/2"-13
(100)
5/8"-11
(125)
5/8"-11
(150)
3/4"-10
(200)
7/8"-9
B in.
1" 1" 1" 1" 11/2" 13/4" 17/8" 2" 2" 2" 21/8" 21/8"
C (mm)
in.
D (mm)
Bolt Size
(73.0)
25/8"
(66.7)
5/16"-18
(82.5)
215/16" 31/4" 37/16" 45/8" 53/8" 61/8" 63/4" 71/4" 85/16" 91/2" 111/2"
(74.6)
5/16"-18
(82.5)
5/16"-18
(mm)
in.
(25.4)
27/8"
(25.4)
31/4" 39/16" 313/16" 51/8" 55/8" 63/4" 71/4" 85/8" 97/8" 1015/16" 137/16"
(25.4) (25.4) (38.1) (44.4) (47.6) (50.8) (50.8) (50.8) (54.0) (54.0)
(90.6) (96.8) (130.2) (142.9) (171.4) (184.1) (219.1) (250.8) (277.8) (341.2)
Design Load
(87.3)
5/16"-18
(117.5)
5/16"-18
(136.5)
3/8"-16
(155.5)
3/8"-16
(171.4)
3/8"-16
(184.1)
2/2"-13
(211.1)
5/8"-11
(241.3)
5/8"-11
(292.1)
3/4"-10
B394 SERIES
Wt./C
Lbs.
(kN)
Lbs.
(kg)
330 330 330 330 440 440 660 660 800 980 980 1200
(1.47)
56 60 74 79 156 176 198 219 288 390 448 691
(3.6)
(1.47) (1.47) (1.47) (1.78) (1.78) (2.93) (2.93) (3.56) (4.36) (4.36) (5.34)
(3.6) (4.5) (5.0) (5.0) (5.4) (6.3) (7.2) (8.1) (8.1) (8.1) (8.1)
‘B’ Dia.
PIPE STRAP • Safety Factor of 3 • Includes: 1 Pair Pipe Clamps with Hex Head Cap Screws and Hex Nuts 1 Hanger Strap • Standard finishes: ZN
‘T’ Clamp Only
A
Pipe Size
‘W’ Clamp Only
Design Load
Design Load Part No. B394-3/4 B394-1 B394-11/4 B394-11/2 B394-2 B394-21/2 B394-3 B394-31/2 B394-4 B394-5 B394-6 B394-8
Pipe 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8”
Size (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200)
A 35/16” 33/4” 4” 45/16” 51/2” 63/8” 7” 79/16” 85/8” 93/4” 115/8” 137/8”
B
T
W
(84.1)
7/16”
(11.1)
1/8”
(3.2)
(95.2)
7/16”
(11.1)
1/8”
(3.2)
(101.6)
7/16”
(11.1)
1/8”
(3.2)
(109.5)
7/16”
(11.1)
1/8”
(3.2)
(139.7)
7/16”
(11.1)
1/4”
(6.3)
(161.9)
9/16”
(14.3)
1/4”
(6.3)
(177.8)
9/16”
(14.3)
1/4”
(6.3)
(192.1)
9/16”
(14.3)
1/4”
(6.3)
(219.1)
11/16”
(17.4)
1/4”
(6.3)
(247.6)
11/16”
(17.4)
1/4”
(6.3)
(295.3)
13/16”
(20.6)
3/8”
(9.5)
(352.4)
13/16”
(20.6)
3/8”
(9.5)
1” 1” 1” 1” 1” 1” 1” 1” 11/4” 11/4” 11/2” 11/2”
(25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (31.7) (31.7) (38.1) (38.1)
Wt./C
Lbs.
kN
Lbs.
kg
500 500 500 800 1040 1040 1040 1040 1040 1040 1615 1615
(2.22)
71 76 77 79 166 179 190 203 320 353 637 837
(32.2)
(2.22) (2.22) (3.56) (4.62) (4.62) (4.62) (4.62) (4.62) (4.62) (7.18) (7.18)
(34.5) (34.9) (35.8) (75.3) (81.2) (86.2) (92.1) (145.1) (160.1) (288.9) (379.6)
Reference page 126 for general fitting and standard finish specifications.
144
Strut Systems
Pipe Brackets B591 SERIES PIPE BRACKET SADDLE AND CLAMP • Safety Factor of 3 • Inside brace not required on B591-2 and B591-21/2 • Includes: 1 pc. Saddle bottom 1 pc. Saddle top (clamp) 2 pcs. Hex Head Cap Screws 2 pcs. Hex Nuts • Standard finish: ZN
113/16” (30.1) Pipe Size
1/4” (6.3)
B D W A Pipe/Conduit Clamps & Hangers
C
Design Load
Wt./C
Design Load Part No. B591-2 B591-21/2 B591-3 B591-31/2 B591-4 B591-5 B591-6 B591-8
Pipe Size 2” 21/2” 3” 31/2” 4” 5” 6” 8”
A
B
(50)
41/2” (114.3)
41/2” (114.3)
31/16”
(77.8)
(65)
5” 51/2” 6” 61/2” 71/2” 8” 9”
5” 53/4” 63/4” 63/4” 8” 83/4” 101/2”
39/16” 313/16” 49/16” 61/16” 61/16” 613/16” 89/16”
(90.5)
(80) (90) (100) (125) (150) (200)
(127.0) (139.7) (152.4) (165.1) (190.5) (203.2) (228.6)
C
73/16” (182.6) (127.0) 715/16” (201.6) (146.0) 83/4” (222.2) (171.4) (171.4) (203.2) (222.2) (266.7)
91/2” 101/4” 121/8” 133/16” 159/16”
(241.3) (260.3) (308.0) (335.0) (395.3)
D
W
Lbs.
kN
Lbs.
kg
15/8” (41.3) 15/8” (41.3)
1235 1180 1125 1070 1015 960 905 850
(5.53)
290 330 439 490 545 666 724 1087
(131.5)
(96.8) 15/8” (41.3) (115.9) 15/8” (41.3) (128.6) 15/8” (41.3) (154.0) 15/8” (41.3) (173.0) 15/8” (41.3) (217.5)
2”
(50.8)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
145
(5.29) (5.04) (4.79) (4.55) (4.30) (4.05) (3.81)
(149.7) (199.1) (222.2) (247.2) (302.1) (328.4) (493.0)
Pipe Block B356 PIPE BLOCK-2” (50) TO 8” (200) PIPE
Pipe/Conduit Clamps & Hangers
• Required hardware not included: 1 pc. 3/8”-16 x 1” Hex Head Cap Screw 1 pc. 3/8”-16 Channel Nut • Material: 1/4” (6.3) thick 15/8” (41.3) wide ASTM A1018 33,000 PSI min. yield • Standard finish: ZN • Wt./C 42 Lbs. (19.0 kg) Per Pair
Hole For 3/8”-16 HHCS
1” (25.4)
31/16” (77.8)
Reference page 126 for general fitting and standard finish specifications.
146
Strut Systems
Pipe Rollers B218
PIPE ROLLERS-1/2” (15) TO 8” (200) PIPE • Design Load 500 Lbs. (2.22 kN) • Safety Factor of 5 • When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) • Malleable Iron Rollers • Sold in pairs • Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts • Standard finish: ZN • Wt./C 256 Lbs. (116.1 kg) Per Pair
B
25/8” (66.7)
A
(60.3)
REFERENCE CHART - A DIMENSION Insulation Thickness in. (mm) Pipe Size 1/2”
(15)
3/4”
(20)
1”
(25)
11/4”
(32)
11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8”
(40) (50) (65) (80) (90) (100) (125) (150) (200)
0” (0.0) 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 75/8” 81/2” 9” 10”
1” (25.4)
(184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (193.7) (215.9) (228.6) (254.0)
– 71/4” 71/4” 71/4” 75/8” 75/8” 8” 81/2” 81/2” 9” 9” 10” 11”
– (184.1) (184.1) (184.1) (193.7) (193.7) (203.2) (215.9) (215.9) (228.6) (228.6) (254.0) (279.4)
11/2” (38.1) – 75/8” 75/8” 8” 8” 81/2” 81/2” 9” 9” 9” 10” 10” 11”
2” (50.8)
– (193.7) (193.7) (203.2) (203.2) (215.9) (215.9) (228.6) (228.6) (228.6) (254.0) (254.0) (279.4)
– 8” 81/4” 81/4” 81/2” 81/2” 9” 9” 10” 10” 10” 11” 11”
– (203.2) (209.5) (209.5) (215.9) (215.9) (228.6) (228.6) (254.0) (254.0) (254.0) (279.4) (279.4)
21/2” (63.5) – – – – 9” 9” 10” 10” 10” 10” 11” 11” 12”
– – – – (228.6) (228.6) (254.0) (254.0) (254.0) (254.0) (279.4) (279.4) (304.8)
3” (76.2) – – – – – – – 10” 10” 11” 11” 11” –
– – – – – – – (254.0) (254.0) (279.4) (279.4) (279.4)
–
4” (101.6) – – – – – – – – – – 12” 12” –
– – – – – – – – – – (304.8) (304.8)
–
REFERENCE CHART - B DIMENSION Insulation Thickness in. (mm) Pipe Size 1/2”
(15)
3/4”
(20)
1”
(25)
11/4”
(32)
11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8”
(40) (50) (65) (80) (90) (100) (125) (150) (200)
0” (0.0) 211/16” 213/16” 215/16” 31/8” 31/4” 39/16” 313/16” 41/8” 43/8” 45/8” 5” 1 5 /2” 615/16”
1” (25.4)
(68.3) (71.4) (74.6) (79.4) (82.5) (90.5) (96.8) (104.8) (111.1) (117.5) (127.0) (139.7) (160.3)
– 37/8” 43/16” 43/16” 43/8” 411/16” 47/8” 51/16” 55/16” 59/16” 61/16” 67/16” 73/8”
– (98.4) (106.4) (106.4) (111.1) (119.1) (123.8) (128.6) (134.9) (141.3) (154.0) (163.5) (187.3)
11/2” (38.1) – 43/8” 411/16” 45/8” 47/8” 51/16” 55/16” 59/16” 513/16” 61/16” 67/16” 615/16” 715/16”
2” (50.8)
– (111.1) (119.1) (117.5) (123.8) (128.6) (134.9) (141.3) (147.6) (154.0) (163.5) (176.2) (201.6)
– 47/8” 51/16” 51/8” 55/16” 55/8” 6” 61/8” 61/4” 67/16” 7” 3 7 /8” 87/16”
– (123.8) (128.6) (130.2) (134.9) (142.9) (152.4) (155.6) (158.7) (163.5) (177.8) (187.3) (214.3)
21/2” (63.5) – – – – 53/4” 61/16” 63/8” 67/16” 611/16” 615/16” 73/8” 715/16” 815/16”
– – – – (146.0) (154.0) (161.9) (163.5) (169.9) (176.2) (187.3) (201.6) (227.0)
3” (76.2) – – – – – – – 7” 71/4” 73/8” 77/8” 81/2” –
Reference page 126 for general fitting and standard finish specifications. Strut Systems
147
– – – – – – – (177.8) (184.1) (187.3) (200.0) (215.9)
–
4” (101.6) – – – – – – – – – – – – – – – – – – – – 813/16” (223.8) 91/2” (241.3) – –
Pipe/Conduit Clamps & Hangers
23/8”
Pipe Rollers B219
PIPE ROLLER SERIES - 3/4” (20) TO 12” (300) PIPE • • • •
Design Load 750 Lbs. (3.33 kN) Safety Factor of 5 Requires field assembly When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) • Malleable Iron Rollers • Sold in pairs • Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts • Reference sizing chart on page 135 • Standard finish: ZN
B
Pipe/Conduit Clamps & Hangers
25/8” (66.7) A
23/8” (60.3)
REFERENCE CHART - A DIMENSION Wt./C PR Part No. B219 B219-1 B219-2 B219-3 B219-4 B219-5
A 71/4” 8” 9” 10” 107/8” 115/8”
(184.1) (203.2) (228.6) (254.0) (276.2) (295.3)
Lbs.
kg
253 258 263 269 274 279
(114.7) (117.0) (119.3) (122.0) (124.8) (126.5)
REFERENCE CHART - B DIMENSION Insulation Thickness in. (mm) Pipe Size 1/2” 3/4”
1” 11/4” 11/2” 2” 21/2” 3” 1 3 /2” 4” 5” 6” 8” 10” 12”
0” (0.0)
211/16” (20) 213/16” (25) 215/16” (32) 31/8” (40) 31/4” (50) 39/16” (65) 33/4” (80) 41/8” (90) 41/4” (100) 49/16” (125) 51/16” (150) 57/16” (200) 63/8” (250) 75/16” (300) 81/4” (15)
1” (25.4)
(68.3) (71.4) (74.6) (79.4) (82.5) (90.5) (95.2) (104.8) (107.9) (115.9) (128.6) (138.1) (161.9) (185.7) (209.5)
– 37/8” 43/16” 43/16” 47/16” 45/8” 47/8” 51/8” 51/4” 51/2” 61/16” 67/16” 77/16” 83/16” –
– (98.4) (106.4) (106.4) (112.7) (117.5) (123.8) (130.2) (133.3) (139.7) (154.0) (163.5) (188.9) (208.0)
–
11/2” (38.1) – 41/2” 45/8” 45/8” 47/8” 53/16” 51/4” 59/16” 513/16” 61/16” 67/16” 615/16” 715/16” – –
2” (50.8)
– (114.3) (117.5) (117.5) (123.8) (131.8) (133.3) (141.3) (147.6) (154.0) (163.5) (176.2) (201.6)
– –
– 47/8” 51/16” 51/8” 51/4” 51/2” 6” 61/16” 61/4” 67/16” 7” 73/8” 83/8” – –
– (123.8) (128.6) (130.2) (133.3) (139.7) (152.4) (154.0) (158.7) (163.5) (177.8) (187.3) (212.7)
– –
21/2” (63.5) – – – – 53/4” 61/16” 63/8” 67/16” 611/16” 615/16” 73/8” 77/8” 9” – –
– – – – (146.0) (154.0) (161.9) (163.5) (169.9) (176.2) (187.3) (200.0) (228.6)
– –
3” (76.2) – – – – – – – 615/16” 71/16” 73/8” 77/8” 815/16” – – –
– – – – – – – (176.2) (179.4) (187.3) (200.0) (211.1)
– – –
4” (101.6) – – – – – – – – – – – – – – – – – – – – 815/16” (227.0) 99/16” (242.9) – – – – – –
Reference B219 sizing chart on page 149
Reference page 126 for general fitting and standard finish specifications.
148
Strut Systems
Pipe Rollers B219 SIZING CHART 0” (0.0)
1” (25.4)
1/2”
B219 B219 B219 B219 B219 B219 B219 B219 B219-1 B219-1 B219-1 B219-2 B219-3 B219-4 B219-5
– B219 B219 B219 B219 B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-3 B219-4 B219-5 –
3/4”
1” 11/4” 11/2” 2” 1 2 /2” 3” 31/2” 4” 5” 6” 8” 10” 12”
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300)
Insulation Thickness in. (mm) 11/2” (38.1) 2” (50.8) 21/2” (63.5) – B219 B219-1 B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-2 B219-3 B219-3 B219-4 – –
– B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-2 B219-3 B219-3 B219-3 B219-4 B219-5 – –
– – – – B219-2 B219-2 B219-3 B219-3 B219-3 B219-3 B219-4 B219-4 B219-5 – –
3” (76.2) – – – – – – – B219-3 B219-4 B219-4 B219-4 B219-5 – – –
Reference page 126 for general fitting and standard finish specifications. Strut Systems
149
4” (101.6) – – – – – – – – – – B219-5 B219-5 – – –
Pipe/Conduit Clamps & Hangers
Pipe Size
Pipe Rollers B379 PIPE ROLLERS-6” (150) TO 18” (450) PIPE Design Load 1500 Lbs. (6.67 kN) Safety Factor of 5 Requires field assembly When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) • Malleable Iron Rollers • Sold in pairs • Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts • Standard finish: ZN • Wt./C 889 Lbs. (403.2 kg)
Pipe/Conduit Clamps & Hangers
• • • •
B
4” (101.6)
A
REFERENCE CHART - A DIMENSION Insulation Thickness in. (mm) Pipe Size 6” 8” 10” 12” 14” 16” 18”
(150) (200) (250) (300) (350) (400) (450)
0” (0.0) 99/16” 101/4” 11” 1111/16” 121/16” 123/4” 131/2”
1” (25.4)
(242.9) (260.3) (279.4) (296.9) (306.4) (323.8) (342.9)
103/16” 111/16” 113/4” 129/16” 127/8” 131/2” 141/4”
11/2” (38.1)
2” (50.8)
(258.8) 105/8” (269.9)
11” 113/4” 121/2” 131/4” 139/16” 1413/16” 15”
(281.0) 113/8” (288.9) (298.4) 121/8” (308.0) (319.1) 127/8” (327.0) (327.0) 133/16” (335.0) (342.9) 137/8” (352.4) (361.9) 145/8” (371.5)
(279.4)
21/2” (63.5) 113/8” (288.9)
(298.4) 123/16” (309.6) (317.5) 1213/16” (325.4) (336.5) 139/16” (344.5)
137/8” (352.4) (360.4) 141/2” (368.3) (381.0) 155/16” (388.9) (344.5)
3” (76.2) 113/4” 121/2” 131/8” 137/8” 141/4” 147/8” 155/8”
(298.4) (317.5) (333.4) (352.4) (361.9) (377.8) (396.9)
4” (101.6) 121/2” 131/4” 137/8” 145/8” 147/8” 151/2” 165/16”
(317.5) (336.5) (352.4) (371.5) (377.8) (393.7) (414.3)
REFERENCE CHART - B DIMENSION Pipe Size 6” 8” 10” 12” 14” 16” 18”
(150) (200) (250) (300) (350) (400) (450)
0” (0.0) 67/8” 713/16” 813/16” 93/4” 105/16” 115/16” 121/4”
1” (25.4)
(174.6) (198.4) (223.8) (247.6) (261.9) (287.3) (311.1)
77/8” 87/8” 97/8” 1015/16” 113/8” 125/16” 131/4”
Insulation Thickness in. (mm) 1 1 /2” (38.1) 2” (50.8) 21/2” (63.5)
83/8” (225.4) 93/8” (250.8) 107/16” (277.8) 113/8” (288.9) 117/8” (312.7) 1213/16” (336.5) 133/4” (200.0)
(212.7) (238.1) (265.1) (288.9) (301.6) (325.4) (349.2)
87/8” 97/8” 1015/16” 117/8” 125/16” 131/4” 143/16”
(225.4) (250.8) (277.8) (301.6) (312.7) (336.5) (360.4)
93/8” 107/16” 113/8” 125/16” 1213/16” 133/4” 1411/16”
(238.1) (265.1) (228.9) (312.7) (325.4) (349.2) (373.1)
3” (76.2) 97/8” 1015/16” 117/8” 1213/16” 131/4” 141/4” 151/8”
4” (101.6)
(250.8) 1015/16” (277.8) (277.8) (301.6) (325.4) (336.5) (361.9) (384.2)
117/8” (301.6) 1213/16” (325.4) 133/4” (349.2) 141/4” (361.9) 151/8” (384.2) 161/16” (408.0)
Reference page 126 for general fitting and standard finish specifications.
150
Strut Systems
Pipe Rollers B479 PIPE ROLLERS-16” (400) TO 30” (750) PIPE • • • •
Design Load 2000 Lbs. (8.89 kN) Safety Factor of 5 Requires field assembly When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) • Malleable Iron Rollers • Sold in pieces • Required hardware not included: 4 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 4 pcs. 1/2”-13 Channel Nuts • Standard finish: ZN • Wt./C 889 Lbs. (403.2 kg)
Pipe/Conduit Clamps & Hangers
B
4” (101.6)
A 213/16” (71.4)
REFERENCE CHART - A DIMENSION Pipe Size 16” 18” 20” 24” 30”
(400) (450) (500) (600) (750)
0” (0.0) 153/16” 151/2” 16” 1613/16” 1713/16”
1” (25.4)
(385.8) (393.7) (406.4) (427.0) (452.4)
155/8” 16” 163/8” 175/16” 181/4”
(396.9) (406.4) (415.9) (439.7) (463.5)
Insulation Thickness in. (mm) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 157/8” 163/16” 169/16” 171/2” 183/8”
(403.2) (411.2) (420.7) (444.5) (466.7)
16” 163/8” 167/8” 171/2” 189/16”
(406.4) (415.9) (428.6) (444.5) (471.5)
161/4” 169/16” 1615/16” 1711/16” 187/8”
(412.7) (420.7) (430.2) (449.3) (476.2)
3” (76.2) 161/2” 163/4” 173/16” 177/8” 187/8”
(419.1)
4” (101.6) 17”
(431.8)
(425.4) 173/16” (436.6) (436.6) 171/2” (444.5) (454.0) 181/8” (460.4) (479.4) 191/4” (488.9)
REFERENCE CHART - B DIMENSION Insulation Thickness in. (mm) Pipe Size 16” 18” 20” 24” 30”
0” (0.0)
1013/16” 117/8” (500) 123/16” (600) 1413/16” (750) 1713/16”
1” (25.4)
(400)
(274.6) 1115/16” (303.2)
(450)
(301.6) 1215/16” (328.6) (325.4) 1315/16” (354.0) (376.2)
157/8”
(452.4)
187/8” (479.4)
(403.2)
11/2” (38.1) 123/8” 137/16” 147/16” 163/8” 193/8”
2” (50.8)
(314.3) 1215/16” (328.6) (341.3) 1315/16” (354.0) (366.7) 147/8”
(377.8)
167/8”
(428.6)
(492.1) 197/8”
(504.8)
(415.9)
21/2” (63.5) 133/8” 147/16” 157/16” 173/8” 203/8”
3” (76.2)
(339.7) 1315/16” (354.0) 1415/16” (379.4) (366.7) 1415/16” (379.4) 1515/16” (404.8)
157/8” (403.2) 1615/16” (430.2) (441.3) 177/8” (454.0) 187/8” (479.4) (517.5) 205/16” (531.8) 2115/16” (557.2) (392.1)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
151
4” (101.6)
Beam Clamps
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. A complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for use with B-Line channels and offer many installation advantages.
Materials & Finishes (Unless otherwise noted) Pipe clamps, pipe hangers, beam clamps, brackets, and rollers are made from low carbon steel strips, plates or rod unless noted. Finish Code
Finish
PLN
Plain
ZN
Electro-Plated Zinc
GRN – HDG CZ SS4 SS6 AL
DURA-GREEN™ Malleable Iron Hot-Dipped Galvanized Chromium Zinc Stainless Steel Type 304 Stainless Steel Type 316 Aluminum
Specification ASTM A1018 Gr. 33 ASTM A1011 SS Grade 33 ASTM B633 SC3 Type III or ASTM A653 ASTM A47 Gr. 32510 ASTM A123 ASTM F1136 ASTM A240 ASTM A240 ASTM B209
Note: A minimum order may apply on special material and finishes.
Load Data The load data published includes a safety factor of 5.0 unless noted (safety factor = ratio of ultimate load to the design load).
Recommended Torque For Setscrews (unless noted) Setscrew Size Foot/Lbs. Nm
1/4”-20
3/8”-16
1/2”-13
4 5
5 7
11 15
Setscrew Size Foot/Lbs. Nm
5/8”-11
3/4”-10
21 28
34 46
See chart on page 72 for bolt torque.
Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
112
Strut Systems
Beam Clamps B351L
D
STEEL C-CLAMP WITH LOCKNUT
Max. Flange Thickness
• Safety Factor of 5 • Setscrew and locknut included • When Retaining Strap is required, order B3362, B3363 or B3365 separately • Standard finishes: ZN, SS4, PLN
*
3/8 Thru 3/4
Sizes Only
E Rod Size
C Part Number With Locknut B351L-3/8 * B351L-1/2 * B351L-5/8 * B351L-3/4 * B351L-7/8
Rod Size A 3/8”-16 1/2”-13 5/8”11 3/4”-10 7/8”-9
B 23/8” 23/8” 23/8” 23/8” 3”
C 23/8” 23/8” 21/4” 31/4” 31/4”
(60.3) (60.3) (60.3) (60.3) (76.2)
D 3/4” 3/4” 3/4” 3/4”
(60.3) (60.3) (57.1) (82.5) (82.5)
E
(19.0) (19.0) (19.0) (19.0) (25.4)
1”
13/8” 13/8” 13/8” 13/8” 17/8”
A
Design Load (34.9) (34.9) (34.9) (34.9) (47.6)
Wt./C
Lbs.
kg
Lbs.
kg
230 380 550 630 1200
(1.03) (1.71) (2.47) (2.83) (5.34)
41 41 60 71 184
(18.6) (18.6) (27.2) (32.2) (83.4)
3/4” (19.0)
B3036L
Max. Flange Thickness
C-CLAMP WITH LOCKNUT • • • • •
Safety Factor of 5 When Retaining Strap is required, order B3363 or B3364 separately Setscrew and locknut included Material: Malleable iron Standard finishes: ZN, PLN
B
ROD SIZE
A Part Number With Locknut B3036L-3/8 B3036L-1/2 B3036L-5/8 B3036L-3/4
Rod Size A 3/8”-16 1/2”-13 5/8”-11 3/4”-10
B 13/4” 13/4” 2” 2”
C 13/4” 13/4” 17/8” 2”
(44.4) (44.4) (50.8) (50.8)
Design Load (44.4) (44.4) (47.6) (50.8)
Wt./C
C
Lbs.
kg
Lbs.
kg
300 380 530 530
(0.89) (1.69) (2.36) (2.36)
29 28 55 72
(13.1) (12.7) (24.9) (32.6)
3/4”
B3362 THRU B3365 RETAINING STRAP
(19.0)
B
• *When ordering specify L (Length) as a suffix to the part number • Material: 14 Gauge (1.9) • Standard finishes: GALV, SS4
L A Part No. B3362* B3363* B3364* B3365*
6” (152.4)
Wt./C for Length L of 8” (203.2) 10” (254.0) 12” (304.8)
Lbs.
kg
Lbs.
kg
Lbs.
kg
Lbs.
kg
17 16 16 21
(7.7) (7.2) (7.2) (9.5)
24 23 23 29
(10.9) (10.4) (10.4) (13.1)
31 30 30 37
(14.0) (13.6) (13.6) (16.8)
38 37 37 46
(17.2) (16.8) (16.8) (20.8)
A 11/4” 11/4” 11/4” 11/2”
(31.7) 7/16” (31.7) 5/8” (31.7) 11/16” (38.1) 3/4”
B (11.1) (15.9) (17.4) (19.0)
For Use With B351-3/8 & 1/2 B351-5/8 & 3/4 B3036-3/8 & 1/2 B3036-5/8 & 3/4 B351-7/8
*See note above.
Reference page 112 for general fitting and standard finish specifications. Strut Systems
113
Beam Clamps
B
Beam Clamps B3033
C
Beam Clamps
REVERSIBLE WIDE JAW WEDGE C-CLAMP (MALLEABLE IRON) • • • •
Safety Factor of 5 Setscrew and locknut included Material: Malleable iron Standard finishes: ZN, PLN
Throat Openings 11/4” (31.7) For 3/8 & 1/2 Sizes
D
B
15/16” (33.3) For 5/8 & 3/4 Sizes Rod Size Throat Opening
Part No.
Rod Size A
B3033-3/8 B3033-1/2 B3033-5/8 B3033-3/4
3/8”-16 1/2”-13 5/8”-11 3/4”-10
Design Load B 21/4” 25/16” 25/8” 211/16”
C (57.1) 2” (58.7) 23/16” (66.7) 21/2” (68.3) 21/2”
D (50.8) (55.5) (63.5) (63.5)
11/8” 11/4” 13/8” 17/16”
Lbs.
kN
Wt./C Lbs.
(28.6) 500 (2.22) (31.7) 810 (3.60) (34.9) 1000 (4.48) (36.5) 1400 (6.22)
46 64 116 140
kg
A
UL Max. Pipe Size
(20.8) 4” (29.0) 8” (52.6) 8” (63.5) 10”
(100) (200) (200) (250)
B3034
C
WEDGE C-CLAMP • • • • •
Safety Factor of 5 3/4” (19.0) Max. Flange Thickness Setscrew and locknut included Material: Malleable iron Standard finishes: ZN, PLN
D
Note: 3/8” & 1/2” Sizes Are Reversible Style
B
*
3/8 & 1/2 Sizes Only
Rod Size
3/4” (19.0) Max.
A
Flange Thickness
Part No.
Rod Size A
B3034-3/8* B3034-1/2* B3034-5/8 B3034-3/4
3/8”-16 1/2”-13 5/8”-11 3/4”-10
Design Load B 15/8” 113/16” 13/4” 2”
C (41.3) 2” (46.0) 23/16” (44.5) 21/8” (50.8) 21/4”
D (50.8) 7/8” (55.5) 13/16” (54.0) 11/8” (57.2 11/8”
Lbs.
kN
(22.2) 560 (2.49) (30.2) 810 (3.60) (28.6) 1000 (4.48) (28.6) 1500 (6.67)
Lbs.
Wt./C kg
UL Max. Pipe Size
54 51 70 98
(24.5) (23.1) (31.7) (44.4)
4” (100) 8” (200) -----
Fig. 65XT REVERSIBLE C-TYPE BEAM CLAMP • • • • • • •
Safety Factor of 5 Max. Flange Thickness Setscrew and locknut included Maximum Pipe Size 4” (100) Design Load 610 Lbs. (2.71kN) Material: Steel Standard finishes: ZN, PLN
3/4” (19.0)
Rod Size 3/8”-16
11/16” (27.0)
15/8” (41.3) 3/4” (19.0) Max. Flange Thickness
7/8”
11/2”
(22.2)
(38.1)
Reference page 112 for general fitting and standard finish specifications.
114
Strut Systems
Beam Clamps Fig. 69 (Formally B-Line B3367) RETAINING STRAP Specify ‘L’ lengths required Minimum recommended return on strap is 1” (25.4) Material: Pre-Galvanized Steel Standard finishes: GALV
Part No. 69-3/8-L 69-1/2-L 69-5/8-L 69-3/4-L
Hole Dia. D
For Use With B3033-3/8
B3034-3/8
& 65XT-3/8 9/16” (30.1) B3033-1/2 & B3034-1/2 11/16” (50.8) B3033-5/8 13/16” (63.5) B3033-3/4 7/16” (30.1)
D
Wt./C** Lbs.
kg
23.9 (10.8)
Beam Clamps
• • • •
11/4” L
(31.7)
23.6 (10.7) 23.2 (10.5) 22.7 (10.3)
** Wt./C based on 6” (152.4) length. For each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.
Fig. 69R RETROFIT RETAINING STRAP • • • •
Specify ‘L’ lengths required Minimum recommended return on strap is 1” (25.4) Material: Pre-Galvanized Steel Standard finishes: GALV
Part No.
Slot Width
69R-3/8-L
7/16” (30.1)
69R-1/2-L
For Use With
11/4” (31.7)
L
Wt./C** Lbs.
kg
B3033-3/8 & B3034-3/8 22.9 (10.4) 65XT-3/8 9/16” (30.1) B3033-1/2 & B3034-1/2 22.6 (10.2)
** Wt./C based on 6” (152.4) length. For each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.
B3037Z Z-PURLIN C-CLAMP • Design Load 500 Lbs. (2.22 kN) • Safety Factor of 5 • Designed for attaching a 3/8”-16 hanger rod to the bottom flange of a Z-purlin • Setscrew and locknut included • Material: Malleable iron • Standard finishes: ZN, PLN
3” (76.2)
313/32” (86.5)
Bottom Hanger Rod Threads 3/8”-16
Reference page 112 for general fitting and standard finish specifications. Strut Systems
115
Beam Clamps B444
Beam Clamps
SERIES ROD SUPPORT • Safety Factor of 5 • Max. Flange Thickness 3/4” (19.0) for 1/4 & 5/16 sizes 1” (25.4) for 3/8 & 1/2 sizes • Setscrew included • Material: Malleable iron • Standard finish: ZN Available in HDG with CZ Hardware
A (Bottom & Back)
D Design Load
Part No.
Thread Size A
Set Screw
B444-1/4
1/4”-20
1/4”-20
13/8”
(34.9)
B444-5/16 B444-3/8 B444-1/2
5/16”-18
1/4”-20
(34.9)
3/8”-16
1/2”-13
1/2”-13
5/8”-11
13/8” 17/8” 23/8”
C
D
Lbs.
kN
Lbs.
13/16” (30.1) 13/16” (30.1)
150 (.66) 24 150 (.66) 23 2” (50.8) 350 (7.12) 65 21/2” (63.5) 1000 (4.45) 132
(47.6) (60.3)
BC442
C
Wt./C kg (10.9) (10.4) (29.5) (59.9)
13/16” (20.6)
LIGHT DUTY BEAM CLAMP • Design Load 75 Lbs. (.33 kN) • Safety Factor of 5 • 11/16” (17.5) Max. Flange Thickness • Setscrew included • Holes tapped 1/4”-20 (Bottom & Back) • Material: 13 Gauge (2.3) • Standard finish: ZN • Wt./C 13 Lbs. (3.9 kg)
11/16” (17.5)
13/4” (44.5)
B210
B210A
BEAM CLAMP
BEAM CLAMP
• Design Load 800 Lbs. (3.56 kN) • Safety Factor of 5 • 5/8” (15.9) Max. Flange Thickness • 1/2”-13 Setscrew included • Standard finish: ZN • Wt./C 100 Lbs. (45.3 kg)
• Design Load 300 Lbs. (1.33 kN) • Safety Factor of 5 • 3/4” (19.0) Max. Flange Thickness • 3/8”-16 Setscrew included • Standard finish: ZN • Wt./C 60 Lbs. (27.2 kg)
5/8” (15.9) Max. Flange Thickness
(9.5)
1/4” (6.3)
3/4” (19.0)
1/2”-13
TAP Bottom Plate Only
3/4” (19.0) Max. Flange Thickness
3/8”
1/2” (12.7)
3/8”-16
TAP Bottom Plate Only
2” (50.8)
11/2” (38.1)
2” (50.8)
11/2” (38.1)
Reference page 112 for general fitting and standard finish specifications.
116
Strut Systems
Beam Clamps B303 THRU B309 BEAM CLAMPS • • • • •
Safety Factor of 5 Max. Flange Thickness 1/16” (1.6) thru 7/8” (22.2) Setscrew included When Retaining Strap is required, order B312 separately Recommended Setscrew Torque: 3/8”-16 150 in-lbs. (16.9 N•m) 1/2”-13 350 in-lbs. (39.5 N•m) • Standard finishes: ZN, HDG
Rod Size A 1/4”-20 5/16”-18 3/8”-16 3/8”-16 1/2”-13 1/2”-13 5/8”-11
11/8” (28.6) Max. Flange Thickness
Wt./C
Design Load
Set Screw 3/8”-16 3/8”-16 3/8”-16 1/2”-13 1/2”-13 1/2”-13 1/2”-13
C 5 2 /16” 25/16” 25/16” 27/16” 27/16” 29/16” 29/16”
(58.7) (58.7) (58.7) (61.9) (61.9) (65.1) (65.1)
T 11 Ga. 11 Ga. 11 Ga. 7 Ga. 7 Ga. 1/4” 1/4”
Lbs. (3.0) (3.0) (3.0) (4.5) (4.5) (6.3) (6.3)
kN
400 600 600 1100 1100 1500 1500
C
Lbs.
(1.78) 72 (2.67) 72 (2.67) 72 (4.89) 97 (4.89) 97 (6.67) 133 (6.67) 133
A
kg
21/2”
(32.6) (32.6) (32.6) (44.0) (44.0) (60.3) (60.3)
(63.5)
B321 SERIES BEAM CLAMPS
15/8”
• • • • •
Safety Factor of 5 111/16” (42.8) Max. Flange Thickness Setscrew included When Retaining Strap is required, order B312 separately Recommended Setscrew Torque: 1/2”-13 350 in-lbs. (39.5 N•m) 5/8”-11 700 in-lbs. (79.0 N•m) • Minimum flange thickness: B321-1 thru B321-3 1/4” (6.3) B321-4 and B321-5 3/8” (9.5) • Standard finishes: ZN, HDG
T
111/16” (42.8) Max. Flange Thickness
(41.3)
C 31/4” (82.5)
A Part No. B321-1 B321-2 B321-3 B321-4 B321-5
Rod Size A
Design Load Setscrew
3/8”-16
1/2”-13
1/2”-13
1/2”-13
5/8”-11
1/2”-13
5/8”-11
5/8”-11
3/4”-10
5/8”-11
C 39/16” 39/16” 39/16” 323/32” 323/32”
T (92.1)
1/4”
(6.3)
(92.1)
1/4”
(6.3)
(92.1)
1/4”
(6.3)
(94.4)
5/16”
(7.9)
(94.4)
5/16”
(7.9)
Lbs.
kN
1300 1400 1600 1800 2000
(5.78) (6.23) (7.12) (8.00) (8.89)
Wt./C Lbs.
kg
187 (84.8) 186 (84.3) 185 (83.9) 239 (108.4) 238 (107.9)
B312 SERIES RETAINING STRAP FOR USE WITH B303 THRU B309 AND B321 SERIES • • • •
3/4” (19.0)
Max. Flange Thickness For thicker beams, step up one flange width size Material: 14 Gauge (1.9) Standard finishes: GALV, HDG
Part No. B312-6 B312-9 B312-12 B312-15
For Flange Width 6” 9” 12” 15”
(152.4) (228.6) (304.8) (381.0)
Wt./C A 9” 12” 15” 18”
(228.6) (304.8) (381.0) (457.2)
13/4”
Lbs.
kg
22 30 40 49
(10.0)
(44.4)
A
(18.1) (22.2)
11/4” (31.7)
Reference page 112 for general fitting and standard finish specifications. Strut Systems
117
1/2” (12.7)
(13.6) 1/4” (6.3)
Beam Clamps
Part No. B303 B304 B305 B306 B307 B308 B309
T
Beam Clamps
Beam Clamps B751
B752
BEAM CLAMP
BEAM CLAMP SWIVEL
• • • • • • • •
• • • • •
Safety Factor of 5 3/4” (19.0) Max. Flange Thickness Setscrew and Locknut included Maximum ATR Size 1/2” Use B753 Swivel Nut (not included) Material: 12 Gauge (2.6) Standard finish: ZN, HDG Wt./C 42 Lbs. (19.0 kg)
Design Load 500 Lbs. (2.22 kN) Safety Factor of 5 Material: 12 Gauge (2.6) Use B753 Swivel Nut (not included) Includes: B751 Clamp (Not 1 pc. B752 Swivel Body Included) 5 3 1 pc. /16”-18 x 1 /4” HHCS 1 pc. 5/16”-18 Hex Nut • Standard finish: ZN • Wt./C 30 Lbs. (13.6 kg)
1”
2”
(25.4)
(50.8)
Overall Height 31/4” (82.5)
3” (76.2)
For Rod Sizes
Design Load 300 Lbs. (1.33 kN) Design Load 500 Lbs. (2.22 kN)
1/4” (6.3) to 1/2” (12.7)
B751-J_-3/8 BEAM CLAMP ASSEMBLY • Includes: 1 pc. B751 Beam Clamp 1 pc. B701 Type J-Hook only 1 pc. SA203-158 Clip 1 pc. 3/8”-16 Hex Nut • 1/4” (6.3) Diameter J-Hook available upon request Part Number changes to B751-J_-1/4 and a 1/4-20 Machine Square Nut (MSQN) is used • Use B753 Swivel Nut (not included) • Standard finishes: ZN
B701-J_-3/8 J-Hook
B751 Clamp
Wt./C Part No.
For Flange Width
Lbs.
kg
B751-J4-3/8
3”-6”
(76.2-152.4)
70
(31.7)
B751-J6-3/8 B751-J9-3/8 B751-J12-3/8
5”-9” 8”-12” 11”-15”
(127.0-228.6)
78 83 88
(35.4)
(203.2-304.8) (279.4-381.0)
(37.6) (39.9)
B753
B701 SERIES
SWIVEL NUT
J-HOOK
• Provides a full swivel of 15° in any direction Specify rod size • Standard finish: ZN
• 1/4” (6.3) Diameter J-Hook available upon request Part Number changes to B751-J_-1/4 and a 1/4-20 Machine Square Nut (MSQN) is used • Standard finish: ZN B701-J_-3/8 J-Hook Only
SA203-158 Clip
A
Part No. Part No.
For Wt./C Rod Size Lbs. kg
B753-3/8
3/8”-16
B753-1/2
1/2”-13
4.0 3.4
(1.8) (1.5)
B701-J4-3/8 B701-J6-3/8 B701-J9-3/8 B701-J12-3/8
TL 3/8”-16 Hex Nut
Thread Length TL
A 83/4” 113/4” 143/4” 173/4”
(222.2) (298.4) (374.6) (450.8)
51/2” 61/2” 61/2” 61/2”
(139.7) (165.1) (165.1) (165.1)
Wt./C Lbs.
kg
26 34 41 48
(11.8) (15.4) (18.6) (21.8)
Reference page 112 for general fitting and standard finish specifications.
118
Strut Systems
Beam Clamps B755 3/8
• • • • •
B756-3/8
BEAM CLAMP
SWING CONNECTOR
Safety Factor of 5 5/8” (15.9) Max. Flange Thickness For 3/8”-16 Hanger Rod only
• • • •
Machine Nuts Material: 12 Gauge (2.6) Includes: 1” 1 pc. B755 Beam Clamp (25.4) 1 pc. 3/8” x 2” Square Head Set Screw 2 pcs. 3/8” Square Nut 21/2” • Standard finish: ZN (60.3) • Wt./C 30 Lbs. (13.6 kg) 3/8” (9.5) Hole For Swing Connector 3/8”-16 ROD
Design Load 150 Lbs. (0.66 kN)
B755 Clamp (Not Included)
Beam Clamps
Design Load 150 Lbs. (0.66 kN) Safety Factor of 5 Material: 12 Gauge (2.6) Includes: 1 pc. B756-3/8 Swing Connector Body 1 pc. 5/16”-18 x 11/4” SHHMS 1 pc. 5/16”-18 Square Nut • Use B753 Swivel Nut (not included) • Standard finish: ZN • Wt./C 15 Lbs. (6.8 kg)
3/8”-16 Square
Overall Height
7/8” (22.2)
17/8” (47.6)
Design Load 300 Lbs. (1.33 kN)
B755-3/8-J_ BEAM CLAMP ASSEMBLY • Includes: 1 pc. B755-3/8 Beam Clamp 1 pc. B705 Type J-Hook only 1 pc. B705 Clip 1 pc. 1/4”-20 Square Nut • Standard finish: ZN
B755 Clamp
B705-J_ J-Hook Only
B705 Clip
Wt./C Part No.
For Flange Width
B755-3/8-J4 B755-3/8-J6 B755-3/8-J10 B755-3/8-J12
4”-6” 6”-10” 10”-12” 12”-14”
kg
47 51 53 55
(21.3)
(101.6-152.4) (152.4-254.0) (254.0-304.8) (304.8-355.6)
B702
B705 SERIES
CLEAT
J-HOOK
• To eliminate the swiveling of the rod when required, use the B702 Cleat and a locking nut. This can be used with the B751 Beam Clamp, B752 Swivel or B756 Swing Connector. • Material: 12 Gauge (2.6) • Standard finish: ZN • Wt./C 6 Lbs. (2.7 kg)
Lbs.
(23.1) (24.0) (24.9)
B705-J_ J-Hook Only
• Use with B755-3/8 • Standard finish: ZN
B705 Clip
A
1/4”-20 Machine Nut
TL
17/32” (30.9)
Part No.
1” (25.4) 13/32” (10.3)
Dia. Hole
B705-J4 B705-J6 B705-J10 B705-J12
Thread Length TL
A 73/8” 113/8” 133/8” 153/8”
(187.3) (288.9) (339.7) (390.5)
3” 41/2” 41/2” 41/2”
(76.2) (114.3) (114.3) (114.3)
Reference page 112 for general fitting and standard finish specifications. Strut Systems
119
Wt./C Lbs.
17 21 23 25
kg (7.7) (9.5) (10.4) (11.3)
Beam Clamps B750 SERIES
Beam Clamps
BEAM CLAMP
1/2”-13 Rod & Hex Nut Sold Separately
• Safety Factor of 5 • Design Load 500 Lbs. (2.22 kN) • Recommended Torque: J-Hook Nut 125 in-lbs. (14.1 N•m) • Maximum Flange Thickness 5/8” (15.9) • Standard finish: ZN
7 Ga (4.6)
Wt./C Part No.
For Flange Width
B750-J4 B750-J6 B750-J9 B750-J12
3”-6” 5”-9” 8”-12” 11”-15”
Lbs.
15/8”
kg
127/32” (46.8)
(41.3)
109 124 135 147
(76.2-152.4) (127.0-228.6) (203.2-304.8) (279.4-381.0)
(49.4) (56.2) (61.2) (66.7)
B700 SERIES J-HOOK • Includes: 1 pc. J-Bolt 1 pc. Hex Nut • Maximum Flange Thickness 5/8” (15.9) • Standard finish: ZN
1/2”-13 Threads
TL A Part No.
Thread Length TL
A
B700-J4 B700-J6 B700-J9 B700-J12
81/2”
(215.9)
111/2” 141/2” 171/2”
(292.1) (368.3) (444.5)
63/4”
(171.4)
93/4” (247.6) 123/4” (323.8) 153/4” (400.0)
Wt./C Lbs.
kg
44 53 63 78
(19.9) (24.0) (28.6) (35.4)
B500 SERIES SQUARE U-BOLT • Includes: 1 pc. U-Bolt only 2 pcs. 3/8”-16 Hex Nuts • Additional sizes available • Standard finish: ZN, SS4
121/32” (42.1)
21/2” (63.5)
A 3/8”-16 Threads
Part No. B500-3-3/8 B500-5
A 33/8” 5”
(85.7) (127.0)
Channel Size
Wt./C Lbs.
kg
15/8” x 15/8” 31/4” x 15/8”
25 33
(11.3) (14.9)
Reference page 112 for general fitting and standard finish specifications.
120
Strut Systems
Beam Clamps B441-22A
B314
BEAM CLAMP
BEAM CLAMP
BEAM CLAMP
• Design Load 1200 Lbs. (5.34 kN) when used in pairs • Safety Factor of 5 • 3/4” (19.0) Max. Flange Thickness • For use with 13/16” (20.6) to 15/8” (41.3) high channel • Recommended Torque: 150 in-lbs. (16.9 N•m) • Sold in pieces • Other flange thickness variations are available, contact B-Line Engineering for sizes • Standard finishes: ZN, HDG, SS4 • Wt./C 87 Lbs. (39.4 kg)
• Design Load 1200 Lbs. (5.34 kN) when used in pairs • Safety Factor of 5 • 3/4” (19.0) Max. Flange Thickness • For use with 15/8” (41.3) to 31/4” (82.5) high channel • Recommended Torque: 150 in-lbs. (16.9 N•m) • Sold in pieces • Other flange thickness variations are available, contact B-Line Engineering for sizes • Standard finishes: ZN, HDG, SS4 • Wt./C 93 Lbs. (42.2 kg)
• Design Load 900 Lbs. (4.00 kN) when used in pairs • Safety Factor of 5 • 5/8” (15.9) Max. Flange Thickness • For use with channel 15/8” (41.3) in height • Setscrew included • Sold in pieces • Standard finishes: ZN, GRN, HDG, SS4 • Wt./C 105 Lbs. (47.6 kg)
3” (76.2)
23/8” (60.3)
3”
23/8”
(76.2)
(60.3)
1” (25.4)
33/8” (85.7)
13/4”
5”
1”
(44.4) 1/4” (6.3)
(127.0)
(25.4) 1/4” (6.3)
1/4” (6.3)
B441Z-22
B441Z-22A
BEAM CLAMP
BEAM CLAMP
• Design Load 1200 Lbs. (5.34 kN) when used in series • Safety Factor of 5 • Sold in pieces • For use with 13/16” (20.6) to 15/8” (41.3) high channel • Recommended Torque: 150 in-lbs. (16.9 N•m) • Standard finishes: ZN • Wt./C 95 Lbs. (43.1 kg)
• Design Load 1200 Lbs. (5.34 kN) when used in series • Safety Factor of 5 • Sold in pieces • For use with 15/8” (41.3) to 31/4” (82.5) high channel • Recommended Torque: 150 in-lbs. (16.9 N•m) • Standard finishes: ZN • Wt./C 101 Lbs. (45.8 kg)
1”
1”
(25.4)
(25.4)
3”
3”
(76.2)
(76.2) 1/4” (6.3)
45/8” (117.5)
45/8” (117.5)
1/4” (6.3)
23/4” (69.9)
43/8” (111.1)
Reference page 112 for general fitting and standard finish specifications. Strut Systems
121
37/16” (87.3)
13/4” (44.4)
Beam Clamps
B441-22
Beam Clamps
Beam Clamps B211
B213
ZEE BEAM CLAMP
I-BEAM CLAMP
• Design Load 600 Lbs. (2.67 kN) when used in pairs • Safety Factor of 5 • 1” (25.4) Max. Flange Thickness • 1/2”-13 Setscrew included • Sold in pieces • Order 1/2”-13 HHCS and Channel Nut separately • Standard finishes: ZN, HDG • Wt./C 66 Lbs. (29.9 kg)
• Design Load 900 Lbs. (4.00 kN) when used in pairs • Safety Factor of 5 • 7/8” (22.2) Max. Flange Thickness • 1/2”-13 Setscrew included • Sold in pieces • Order 1/2”-13 x 21/4” HHCS and Channel Nut separately • Material: Malleable iron • Standard finishes: ZN, GRN • Wt./C 95 Lbs. (43.1 kg)
11/2” (38.1)
11/2”
3/8”
(38.1)
(9.5)
31/4” (82.5)
21/2” (63.5)
B212-1/4
B355 BEAM CLAMP
I-BEAM CLAMP
• Design Load 1200 Lbs. (5.34 kN) when used in pairs • Safety Factor of 5 • 5/8” (15.9) Max. Flange Thickness • Sold in pieces • Order 1/2”-13 x 11/2” HHCS and Channel Nut separately • Standard finishes: ZN, GRN, HDG, SS4 • Wt./C 30 Lbs. (13.6 kg)
• Design Load 600 Lbs. (2.67 kN) when used in pairs • Safety Factor of 5 • 7/8” (22.2) Max. Flange Thickness • 3/8”-16 Setscrew included • Sold in pieces • Standard finish: ZN • Wt./C 41 Lbs. (18.6 kg)
15/8”
7/8” (22.2)
(41.3)
I.D.
1/4” Thick
(6.3)
5/8” (15.9)
127/32”
2”
(46.8)
(50.8) 1/4”
11/4”
(6.3)
(31.7)
B435
B212-3/8 I-BEAM CLAMP
BEAM CLAMP
• Design Load 1000 Lbs. (4.45 kN) when used in pairs • Safety Factor of 5 • 11/8” (28.6) Max. Flange Thickness • 1/2”-13 Setscrew included • Sold in pieces • Standard finishes: ZN, HDG • Wt./C 62 Lbs. (28.1 kg)
• Design Load 900 Lbs. (4.00 kN) when used in pairs • Safety Factor of 5 • 21/8” (54.0) Max. Flange Thickness • 1/2”-13 x 2” Setscrew included • Sold in pieces • Standard finish: ZN • Wt./C 82 Lbs. (37.2 kg)
11/4”
(31.7) I.D.
3/8” (9.5)
3/8” THICK
11/4” (31.7)
(9.5)
27/8” (73.0)
2” (50.8)
2”
11/4”
(50.8)
(31.7)
Reference page 112 for general fitting and standard finish specifications.
122
Strut Systems
Beam Clamps B405
B405A
BEAM CLAMP
SUSPENSION MEMBER
• Design Load 1100 Lbs. (4.89 kN) when used in pairs • Safety Factor of 5 • 21/2” (63.5) Max. Flange Thickness without channel • 1/2”-13 x 11/2” Setscrew included • Sold in pieces • Standard finish: ZN • Wt./C 92 Lbs. (41.7 kg)
• Standard finishes: ZN, GRN • Wt./C 75 Lbs. (34.0 kg)
SUSPENSION MEMBER WITH BEAM CLAMP • 7/8” (22.2) Max. Flange Thickness • Includes: 1 pc. B405 Suspension Member 1 pc. B213 I-Beam Clamp 1 pc. 1/2”-13 x 21/2” HHCS 1 pc. 1/2”-13 Hex Nut • Material: Malleable iron • Standard finishes: ZN, GRN • Wt./C 183 Lbs. (83.0 kg)
37/8” (87.3) O.D.
1/4” (6.3)
111/16” (42.9) I.D.
10°
37/16” 2 Holes 9/16” (14.3) DIA.
27/8” (73.0)
2” 3/8” (9.5)
11/2” (38.1)
(50.8)
(87.3)
111/16”
17/8”
17/8”
(47.6) O.D.
(47.6)
B318 THRU B320 BEAM CLAMP ASSEMBLY • Safety Factor of 5 • 7/8” (22.2) Max. Flange Thickness • Includes: 1 pc. B333 Slotted U-Support 2 pcs. B213 I-Beam Clamp 2 pcs. 1/2”-13 x 21/2” HHCS 2 pcs. 1/2”-13 Hex Nuts • Material: Malleable iron • Standard finishes: ZN, GRN
Part No. B318 B319 B320
A 71/4” 81/2” 103/8”
(184.1) (215.9) (263.5)
1/4” (6.3)
15/8” (41.3)
B A
Design Lbs. For Flange Width B 23/8”-41/2” (60.3-114.3) 1200 33/4”-53/4” (95.2-146.0) 800 55/8”-75/8” (142.9-193.7) 560
Load
Wt./C
kN
Lbs.
kg
(5.34) (3.56) (2.49)
325 340 357
(147.4) (154.2) (161.9)
B602A THRU B602C BEAM CLAMP WITH GUSSET ASSEMBLY • Safety Factor of 5 • 7/8” (22.2) Max. Flange Thickness • Includes: 1 pc. B451 Slotted Three Hole U Support with Gusset 2 pcs. B213 I-Beam Clamp 2 pcs. 1/2”-13 x 21/2” HHCS 2 pcs. 1/2”-13 Hex Nuts • Material: Malleable iron • Standard finishes: ZN, GRN
Part No. B602A B602B B602C
A 71/4” 81/2” 103/8”
(184.1) (215.9) (263.5)
1/4” (6.3)
13/4” (44.4)
B A
Design Lbs. For Flange Width B 23/8”-41/2” (60.3-114.3) 1200 33/4”-53/4” (95.2-146.0) 1200 55/8”-75/8” (142.9-193.7) 1200
Load
Wt./C
kN
Lbs.
kg
(5.34) (5.34) (5.34)
365 383 408
(165.1) (173.7) (185.0)
Reference page 112 for general fitting and standard finish specifications. Strut Systems
123
(42.9)
Beam Clamps
B427
Beam Clamps B760-22 SERIES
B760-22A SERIES
Beam Clamps
BEAM CLAMP
BEAM CLAMP
• 1” (25.4) Max. Flange Thickness • For use with 13/16” (20.6) to 15/8” (41.3) high channel • Recommended Torques: U-Bolt Nuts 150 in-lbs. (16.9 N•m) 33/8” J-Hook Nut 60 in-lbs. (6.8 N•m) (85.7) • Includes: 1 pc. B760 Plate 1 pc. B701 Type J-Hook only 1 pc. B500-33/8” U-Bolt only 3 pcs. 3/8”-16 Hex Nuts 1/4” • Standard finish: ZN (6.3)
• 1” (25.4) Max. Flange Thickness • For use with 15/8” (41.3) to 31/4” (82.5) high channel • Recommended Torques: 5” U-Bolt Nuts 150 in-lbs. (16.9 N•m) (127.0) J-Hook Nut 60 in-lbs. (6.8 N•m) • Includes: 1 pc. B760 Plate 1 pc. B701 Type J-Hook only 1 pc. B500-5” U-Bolt only 1/4” 3 pcs. 3/8”-16 Hex Nuts (6.3) • Standard finish: ZN
3”
3”
(76.2)
(76.2)
3/8” (9.5) Dia.
3/8” (9.5) Dia.
J-Hook and Hex Nut
J-Hook and Hex Nut
Wt./C Part No.
For Flange Width 4”-57/8”
B760-22-J4 B760-22-J6 6”-87/8” B760-22-J9 9”-117/8” B760-22-J12 12”-147/8”
Lbs.
(101.6-149.2) (152.4-225.4) (228.6-301.6) (304.8-377.8)
122 129 135 141
Wt./C Part No.
kg
For Flange Width 4”-57/8”
B760-22A-J4 B760-22A-J6 6”-87/8” B760-22A-J9 9”-117/8” B760-22A-J12 12”-147/8”
(55.3) (58.5) (61.2) (63.9)
(101.6-149.2) (152.4-225.4) (228.6-301.6) (304.8-377.8)
B761-22 SERIES
B761-22A SERIES
BEAM CLAMP
BEAM CLAMP
• 1” (25.4) Max. Flange Thickness • For use with 13/16” (20.6) to 15/8” (41.3) high channel • Recommended Torques: U-Bolt Nuts 150 in-lbs. (16.9 N•m) ATR Nuts 60 in-lbs. (6.8 N•m) • Includes: 33/8” 2 pcs. B700 Plates 3 2 pcs. B500-3 /8” U-Bolts only (85.7) 1 pc. 3/8”-16 ATR (Length) 6 pcs. 3/8”-16 Hex Nuts • Standard finish: ZN
• 1” (25.4) Max. Flange Thickness • For use with 15/8” (41.3) to 31/4” (82.5) high channel • Recommended Torques: U-Bolt Nuts 150 in-lbs. (16.9 N•m) ATR Nuts 60 in-lbs. (6.8 N•m) • Includes: 2 pcs. B700 Plates 2 pcs. B500-5” U-Bolts only 1 pc. 3/8”-16 ATR (Length) 6 pcs. 3/8”-16 Hex Nuts 1/4” • Standard finish: ZN (6.3)
1/4” (6.3)
3”
Part No.
For Flange Width
B761-22-4 4”-57/8” (101.6-149.2) B761-22-6 6”-87/8” (152.4-225.4) B761-22-9 9”-117/8” (228.6-301.6) B761-22-12 12”-147/8” (304.8-377.8)
ATR Length 4” 6” 9” 12”
Wt./C Lbs. kg
(101.6) 202
(91.6)
(152.4) 206
(93.4)
(228.6) 214
(97.0)
Part No.
For Flange Width
B761-22A-4 4”-57/8” (101.6-149.2) B761-22A-6 6”-87/8” (152.4-225.4) B761-22A-9 9”-117/8” (228.6-301.6) B761-22A-12 12”-147/8” (304.8-377.8)
(304.8) 221 (100.2)
129 136 142 148
(58.5) (61.7) (64.4) (67.1)
5”
3/8”-16 (9.5) ATR
(76.2)
and Hex Nuts
kg
(127.0)
3”
3/8”-16 (9.5) ATR
(76.2)
Lbs.
and Hex Nuts
ATR Length 4” 6” 9” 12”
Wt./C Lbs. kg
(101.6) 216
(98.0)
(152.4) 220
(99.8)
(228.6) 228 (103.4) (304.8) 235 (106.6)
Reference page 112 for general fitting and standard finish specifications.
124
Strut Systems
Beam Clamps B614
COLUMN SUPPORT FOR B22
B613A
COLUMN SUPPORT FOR B22
COLUMN SUPPORT FOR B52
• Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 • Use with B22 and B24 Channel • Setscrews to be torqued to 19 ft./Lbs • Sold in pairs • Standard finishes: ZN, GRN, HDG • Wt./C 100 Lbs. (45.3 kg)
• Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 • Use with B52 and B54 Channel • Setscrews to be torqued to 19 ft./Lbs • Sold in pairs • Standard finishes: ZN, GRN, HDG • Wt./C 100 Lbs. (45.3 kg)
15/8”
15/8”
(41.3)
(41.3)
31/2”
31/2”
(88.9)
(88.9)
3/8” x 2” Cone
3/8” x 2” Cone
Point Setscrews
Point Setscrews
B422 SERIES RIGHT ANGLE CLAMP • Safety Factor of 5 • Material: 7 Gauge (4.5) • Standard finishes: ZN, SS4
Part No. B422-1/2 B422-3/4 B422-1 B422-11/4 B422-11/2 B422-2 B422-21/2 B422-3 B422-31/2 B422-4
Design Load Vertical Pull
Conduit Size 1/2” 3/4”
A 23/8” 23/8” 27/8” 27/8” 31/4” 311/16” 41/4” 47/8” 57/16” 6”
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100)
1” 11/4” 11/2” 2 21/2” 3” 31/2” 4”
Lbs. (60.3) (60.3) (73.0) (73.0) (82.5) (93.7) (107.9) (123.8) (138.1) (152.4)
250 300 400 400 500 600 700 800 900 1000
kg (1.11) (1.33) (1.78) (1.78) (2.22) (2.67) (3.11) (3.56) (4.00) (4.45)
A
Wt./C Lbs.
38 39 48 50 59 75 98 111 123 135
kg (17.2) (17.7) (21.8) (22.7) (26.7) (34.0) (44.4) (50.3) (55.8) (61.2)
U-Bolt and Hex Nuts Design Load Vertical Pull
B107S
B593
U-SUPPORT
CLEVIS SWIVEL
• Material: 7 Gauge (4.5) • Standard finishes: ZN, GRN • Wt./C 51 Lbs. (23.1 kg)
• Includes: 1 pc. 3/8”-16 x 2” HHCS 1 pc. 3/8”-16 Hex Nut • Material: 11 Gauge (3.0) • Standard finishes: ZN, GRN • Wt./C 31 Lbs. (14.0 kg)
33/4” (95.2)
1” (25.4)
13/8”
17/16”
(34.9)
(36.5)
7/16” (11.1) Dia.
13/4”
O.D. (44.4)
4 Holes 9/16” (14.3) Dia.
• Illustration shows B107S and B593 used together • Design Load 900 Lbs., strength of assembly only • Verify anchorage
21/2” (63.5)
11/4” (31.7)
Reference page 112 for general fitting and standard finish specifications. Strut Systems
125
9/16” (14.3) Dia.
Beam Clamps
• Quick installation (one bolt to tighten) • Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 • Use with B22 and B24 Channel • Sold in pairs • Standard finish: ZN • Wt./C 50 Lbs. (22.6 kg)
B613
Pipe/Conduit Clamps & Hangers Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. A complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for use with our channels and offer many installation advantages.
Materials & Finishes*
Pipe/Conduit Clamps & Hangers
Pipe clamps, pipe hangers, beam clamps, brackets, and rollers are made from low carbon steel strips, plates or rod unless noted. Finish Code PLN
Finish Plain
ZN
Electro-Plated Zinc
GRN DCU HDG YZN SS4 SS6 AL
DURA-GREEN™ DURA-COPPER™ Hot-Dipped Galvanized Yellow Zinc Chromate Stainless Steel Type 304 Stainless Steel Type 316 Aluminum
Specification ASTM A1011 33,000 PSI min. yield ASTM B633 SC3 Type III or ASTM A653
ASTM A123 ASTM B633 SC3 Type II ASTM A240 ASTM A240 ASTM B209
*Unless otherwise noted.
Load Data The load data published includes a safety factor of 5.0 unless noted (safety factor = ratio of ultimate load to the design load).
Recommended Torque For Setscrews (unless noted) Setscrew Size Foot/Lbs. Nm
1/4”-20
3/8”-16
1/2”-13
4 5
5 7
11 15
Setscrew Size Foot/Lbs. Nm
5/8”-11
3/4”-10
21 28
34 46
*See chart on page 72 for bolt torque.
Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
126
Strut Systems
Pipe Clamps B2207 THRU B2213 MULTI-GRIP PIPE CLAMPS FOR THINWALL (EMT), I.M.C., RIGID CONDUIT OR PIPE • • • • •
Design Load 1
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Includes Combination Recess Hex Head Machine Screw and Square Nut Material: ASTM A1011 33,000 PSI min. yield Standard finish: ZN
Design Load 3 Design Load 2
Nominal Size
Material Thickness
B2207
38 / ” (10)
16 Ga. (1.5)
B2208
1/2” (15)
16 Ga. (1.5)
B2209
3/4” (20)
14 Ga. (1.9) .917-1.081 (23.2-27.4) B2002, B2009,
400
(1.78)
50
(.22)
50
(.22)
12
(5.4)
(25) 14 Ga. (1.9) 1.125-1.375 (28.6-34.9) B2003, B2010,
400
(1.78)
50
(.22)
50
(.22)
13
(5.9)
B2211
11/4” (32) 14 Ga. (1.9) 1.500-1.691 (38.1-42.9) B2004, B2011, B2033, B2034
400
(1.78)
50
(.22)
50
(.22)
15
(6.8)
B2212
11/2” (40) 12 Ga. (2.6) 1.735-1.931 (44.0-49.0) B2005, B2012, B2035 B2006, B2013 2” (50) 12 Ga. (2.6) 2.192-2.400 (55.7-60.9) B2039
600
(2.67)
75
(.33)
75
(.33)
23
(10.4)
600
(2.67)
75
(.33)
75
(.33)
26
(11.8)
B2210
B2213
1”
O.D. Size Range
Alternate For Design Load 1 Design Load 2 Design Load 3 Wt./C Lbs. kN Lbs. kg Lbs. kg Lbs. kg Clamp No.’s B2000, B2001, (1.78) (4.1) .557-.706 (14.2-17.9) 50 (.22) 50 (.22) 9 400 B2026 (1.78) (5.0) .701-.875 (17.8-22.2) B2001, B2008, 400 50 (.22) 50 (.22) 11 B2027, B2028
B2030, B2031,
BPC-8 THRU BPC-64 BREAK-APART CONDUIT CLAMP • • • •
Design Load 200 Lbs. (.896 kN) Includes Combination Recess Hex Head Machine Screw Material: ASTM A1011 33,000 PSI min. yield Standard finish: ZN
Part No. BPC-8 BPC-12 BPC-16 BPC-20 BPC-24 BPC-32 BPC-40 BPC-48 BPC-56 BPC-64
A Rigid or EMT Conduit Size 1/2” (21.3) 3/4” (26.7) 1” (33.4) 11/4” (42.2) 11/2” (48.3) 2” (60.3) 21/2” (73.0) 3” (88.9) 31/2” (101.6) 4” (114.3)
Wt./C Lbs.
11.2 12.7 14.5 16.5 18.5 21.5 21.5 22.0 23.0 27.5
kg (5.1) (5.8) (6.6) (7.5) (8.4) (9.8) (9.8) (10.0) (10.4) (12.5)
A
Design Load
Reference page 126 for general fitting and standard finish specifications. Strut Systems
127
Pipe/Conduit Clamps & Hangers
Part No.
Pipe Clamps B2000 SERIES PIPE AND CONDUIT CLAMPS • • • •
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Includes Combination Recess Hex Head Machine Screw and Square Nut Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finishes: ZN, HDG, SS4, SS6, AL
Design Load 1
Note: For EMT sizes 21/2” and larger use rigid conduit sizes.
Design Load 2 Design Load 3
Pipe/Conduit Clamps & Hangers
THINWALL CONDUIT (EMT) CLAMPS Part No. B2000 B2001 B2002 B2003 B2004 B2005 B2006
Conduit Size 3/8”
(10)
1/2”
(15)
3/4”
(20)
1” 11/4” 11/2” 2”
(25) (32) (40) (50)
Material Thickness 16 16 16 14 14 12 12
Ga. Ga. Ga. Ga. Ga. Ga. Ga.
(1.5) (1.5) (1.9) (1.9) (1.9) (2.6) (2.6)
Design Load 1 Design Load 2 Design Load 3
Wt./C
Lbs.
kN
Lbs.
kg
Lbs.
kg
Lbs.
kg
400 400 400 600 600 800 800
(1.78)
50 50 50 75 75 125 125
(.22)
50 50 50 75 75 125 125
(.22)
10 10 11 16 19 28 33
(4.5)
(1.78) (1.78) (2.67) (2.67) (3.56) (3.56)
(.22) (.22) (.33) (.33) (.56) (.56)
(.22) (.22) (.33) (.33) (.56) (.56)
(4.5) (5.0) (7.2) (8.6) (12.7) (14.9)
RIGID CONDUIT OR PIPE CLAMPS Part No. B2001 B2008 B2009 B2010 B2011 B2012 B2013 B2014 B2015 B2016 B2017 B2018 B2019 B2020 B2021 B2022 B2130 B2132
Conduit Size 3/8”
(10)
1/2”
(15)
3/4”
(20)
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 41/2” 5” 6” 7” 8” 10 12”
(25) (32) (40) (50) (65) (80) (90) (100) (115) (125) (150) (175) (200) (254) (305)
Material Thickness 16 16 14 14 14 12 12 12 12 11 11 11 11 11 11 11 11 11
Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga.
(1.5) (1.5) (1.9) (1.9) (1.9) (2.6) (2.6) (2.6) (2.6) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0)
Design Load 1 Design Load 2 Design Load 3
Wt./C
Lbs.
kN
Lbs.
kg
Lbs.
kg
Lbs.
kg
400 400 600 600 600 800 800 800 800 1000 1000 1000 1000 1000 1000 1000 1000 1000
(1.78)
50 50 75 75 75 125 125 125 125 200 200 200 200 200 250 250 250 250
(.22)
50 50 75 75 75 125 125 125 125 150 150 150 150 150 200 200 200 200
(.22)
10 11 15 16 20 30 34 38 44 61 66 70 77 100 115 128 160 185
(4.5)
(1.78) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45)
(4.45) (4.45)
(.22) (.33) (.33) (.33) (.56) (.56) (.56) (.56) (.89) (.89) (.89) (.89) (.89) (1.11) (1.11) (1.11) (1.11)
(.22) (.33) (.33) (.33) (.56) (.56) (.56) (.56) (.67) (.67) (.67) (.67) (.67) (.89) (.89) (.89) (.89)
(5.0) (6.8) (7.2) (9.1) (13.6) (15.4) (17.2) (19.9) (27.6) (29.9) (31.7) (34.9) (45.3) (52.1) (58.0) (72.6) (83.9)
Reference page 126 for general fitting and standard finish specifications.
128
Strut Systems
Pipe Clamps B2000 SERIES
Design Load 1
PVC CLAMPS • • • •
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Includes Combination Recess Hex Head Machine Screw and Square Nut Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finishes: PVC
CLAMP SIZING CHART FOR PVC COATED RIGID CONDUIT AND CLAMPS
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6”
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150)
.020 (.51mm)
0
.020 (.51mm)
B2002 B2030 B2010 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115
B2002 B2030 B2010 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115
B2009 B2003 B2004 B2005 B2037 B2041 B2045 B2050 B2054 B2058 B2066 B2115
CLAMP SIZING CHART FOR PVC COATED THINWALL (EMT) CONDUIT AND CLAMPS Conduit Coating .020 (.51mm) .040 (1.01mm) Clamp Coating Clamp Coating
Nominal Conduit Size 3/8” 1/2” 3/4”
1” 11/4” 11/2” 2”
(10) (15) (20) (25) (32) (40) (50)
0
.020 (.51mm)
0
.020 (.51mm)
B2026 B2027 B2009 B2003 B2004 B2005 B2039
B2026 B2027 B2009 B2031 B2011 B2005 B2039
B2026 B2027 B2009 B2031 B2011 B2005 B2039
B2001 B2008 B2009 B2031 B2011 B2012 B2013
*See B2000 O.D. pipe and conduit clamp chart on pgs. 130-131 for corresponding clamp load data.
*See B2000 O.D. pipe and conduit clamp chart on pgs. 130-131 for corresponding clamp load data.
B2000 SERIES
Design Load 1
COPPER TUBING CLAMPS • • • •
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Includes Combination Recess Hex Head Machine Screw and Square Nut Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finish: Exclusive DURA-COPPER™ Finish (DCU) Design Load 2 Design Load 3
COPPER TUBING CLAMPS Part No.
Tubing Size
B2024DCU B2025DCU B2026DCU B2027DCU B2008DCU B2030DCU B2010DCU B2011DCU B2038DCU B2042DCU B2046DCU B2050DCU B2054DCU B2062DCU B2110DCU B2126DCU
1/4” 3/8” 1/2” 5/8” 3/4”
1” 11/4” 11/2” 2 21/2” 3 31/2” 4 5 6 8
O.D. Size In.
(mm)
.375 .500 .625 .750 .875 1.125 1.375 1.625 2.125 2.625 3.125 3.625 4.125 5.125 6.125 8.125
(9.5) (12.7) (15.9) (19.0) (22.2) (28.6) (34.9) (41.3) (54.0) (66.7) (79.4) (92.1) (104.8) (130.2) (155.6) (206.4)
Material Design Load 1 Design Load 2 Design Load 3 kN Lbs. kg Lbs. kg Thickness Lbs.
Lbs.
kg
16 Ga. 16 Ga. 16 Ga. 16 Ga. 16 Ga. 14 Ga. 14 Ga. 14 Ga. 12 Ga. 12 Ga. 12 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga. 11 Ga.
8 9 10 10 11 15 17 19 32 35 39 54 61 70 94 123
(3.6)
(1.5) (1.5) (1.5) (1.5) (1.5) (1.9) (1.9) (1.9) (2.6) (2.6) (2.6) (3.0) (3.0) (3.0) (3.0) (3.0)
400 400 400 400 400 600 600 600 800 800 800 1000 1000 1000 1000 1000
(1.78) (1.78) (1.78) (1.78) (1.78) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45) (4.45) (4.45)
50 50 50 50 50 75 75 75 125 125 125 200 200 200 250 250
(.22) (.22) (.22) (.22) (.22) (.33) (.33) (.33) (.56) (.56) (.56) (.89) (.89) (.89) (1.11) (1.11)
50 50 50 50 50 75 75 75 125 125 125 150 150 150 200 200
(.22) (.22) (.22) (.22) (.22) (.33) (.33) (.33) (.56) (.56) (.56) (.67) (.67) (.67) (.89) (.89)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
129
Wt./C
(4.1) (4.5) (4.5) (5.0) (6.8) (7.7) (8.6) (14.5) (15.9) (17.7) (24.5) (27.6) (31.7) (42.6) (55.8)
Pipe/Conduit Clamps & Hangers
0 B2008 B2030 B2032 B2005 B2012 B2013 B2014 B2015 B2016 B2017 B2019 B2020
Size 3/4”
Design Load 3
Conduit Coating .020 (.51mm) .040 (1.01mm) Clamp Coating Clamp Coating
Nominal Conduit 1/2”
Design Load 2
Pipe Clamps B2000 SERIES
Design Load 1
O.D. PIPE AND CONDUIT CLAMPS • • • •
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Other sizes available upon request Includes Combination Recess Hex Head Machine Screw and Square Nut. • Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finishes: ZN, HDG, SS4
O.D. O.D.
Design Load 2 Design Load 3
O.D. CLAMPS
Pipe/Conduit Clamps & Hangers
Part No.
O.D. Size (in.)
Hardware Size
Material Design Load 1 Design Load 2 Design Load 3 Gauge Thickness Lbs. kN Lbs. kN Lbs. kN
Wt./C Lbs.
kg
B2023
1/4”
(6.3)
1/4”-20
16
(1.5)
120
(.54)
30
(.13)
30
(.13)
8
(3.6)
B2024
3/8”
(9.5)
1/4”-20
16
(1.5)
300
(1.33)
40
(.18)
40
(.18)
8
(3.6)
B2025
1/2”
(12.7)
1/4”-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
9
(4.1)
B2026
5/8”
(15.9)
1/4”-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
10
(4.5)
B2027
3/4”
(19.0)
1/4”-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
10
(4.5)
B2008
7/8”
(22.2)
1/4”-20
16
(1.5)
400
(1.78)
50
(.22)
50
(.22)
11
(5.0)
B2009
1”
(25.4)
1/4”-20
14
(1.9)
500
(2.22)
75
(.33)
75
(.33)
15
(6.8)
B2030
11/8”
(28.6)
1/4”-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
15
(6.8)
B2031
11/4”
(31.7)
1/4”-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
16
(7.3)
B2010
13/8”
(34.9)
1/4”-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
17
(7.7)
B2004
11/2”
(38.1)
1/4”-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
18
(8.2)
B2011
15/8”
(41.3)
1/4”-20
14
(1.9)
600
(2.67)
75
(.33)
75
(.33)
19
(8.6)
B2005
13/4”
(44.4)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
29
(13.1)
B2012
17/8”
(47.6)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
30
(13.6)
B2037
2
(50.8)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
30
(13.6)
B2038
21/8”
(54.0)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
32
(14.5)
B2039
21/4”
(57.1)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
32
(14.5)
B2013
23/8”
(60.3)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
34
(15.4)
B2041
21/2”
(63.5)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
35
(15.9)
B2042
25/8”
(66.7)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
35
(15.9)
B2043
23/4”
(69.8)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
38
(17.2)
B2014
27/8”
(73.0)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
38
(17.2)
B2045
3
(76.2)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
38
(17.2)
B2046
31/8”
(79.4)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
39
(17.7)
B2047
31/4”
(82.5)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
41
(18.6)
B2048
33/8”
(85.7)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
43
(19.5)
B2015
31/2”
(88.9)
5/16”-18
12
(2.6)
800
(3.56)
125
(.56)
125
(.56)
44
(20.0)
B2050
35/8”
(92.1)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
54
(24.5)
B2051
33/4”
(95.2)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
57
(25.8)
B2052
37/8”
(41.3)
5/16”-18
11
(3.0)
1000
(4.45
200
(.89)
150
(.67)
55
(25.0)
B2016
4
(101.6)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
57
(25.8)
B2054
41/8”
(104.8)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
61
(27.7)
B2055
41/4”
(107.9)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
62
(28.1)
B2056
43/8”
(111.1)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
64
(29.0)
B2017
41/2”
(114.3)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
66
(29.9)
B2058
45/8”
(117.5)
5/16”-18
11
(3.0)
1000
(4.45)
200
(.89)
150
(.67)
66
(29.9)
Reference page 126 for general fitting and standard finish specifications.
130
Strut Systems
Pipe Clamps B2000 SERIES O.D. PIPE AND CONDUIT CLAMPS • • • • •
Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Other sizes available upon request Includes Combination Recess Hex Head Machine Screw and Square Nut. Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 Design Load 1 • Standard finishes: ZN, HDG, SS4 O.D.
O.D.
Design Load 2 Design Load 3
Part No. B2059 B2060 B2018 B2062 B2063 B2064 B2019 B2066 B2067 B2068 B2069 B2110 B2111 B2112 B2113 B2020 B2115 B2116 B2117 B2118 B2119 B2120 B2121 B2021 B2123 B2124 B2125 B2126 B2127 B2128 B2129 B2022 B2130 B2132
O.D. Size (in.)
Hardware Size
43/4”
(120.6)
5/16”-18
47/8” 5 51/8” 51/4” 53/8” 51/2” 55/8” 53/4” 57/8” 6” 61/8” 61/4” 63/8” 61/2” 65/8” 63/4” 67/8” 7” 71/8” 71/4” 73/8” 71/2” 75/8” 73/4” 77/8” 8” 81/8” 81/4” 83/8” 81/2” 85/8” 103/4” 123/4”
(123.8)
5/16”-18
(127.0)
5/16”-18
(130.2)
5/16”-18
(133.3)
5/16”-18
(136.5)
5/16”-18
(139.7)
5/16”-18
(142.9)
5/16”-18
(146.0)
5/16”-18
(149.2)
5/16”-18
(152.4)
5/16”-18
(155.6)
3/8”-16
(158.7)
3/8”-16
(161.9)
3/8”-16
(165.1)
3/8”-16
(168.3)
3/8”-16
(171.4)
3/8”-16
(174.6)
3/8”-16
(177.8)
3/8”-16
(181.0)
3/8”-16
(184.1)
3/8”-16
(187.3)
3/8”-16
(190.5)
3/8”-16
(193.7) (196.8)
3/8”-16
(200.0)
3/8”-16
(203.2)
3/8”-16
(206.4)
3/8”-16
(209.5)
3/8”-16
(212.7)
3/8”-16
(215.9)
3/8”-16
(219.1)
3/8”-16
(273.0)
3/8”-16
(323.8)
3/8”-16
3/8”-16
Material Design Load 1 Design Load 2 Design Load 3 Gauge Thickness Lbs. kN Lbs. kN Lbs. kN 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11
(3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0) (3.0)
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
(4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45) (4.45)
200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250
(.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11) (1.11)
150 150 150 150 150 150 150 150 150 150 150 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200
Reference page 126 for general fitting and standard finish specifications. Strut Systems
131
(.67) (.67) (.67) (.67) (.67) (.67) (.67) (.67) (.67) (.67) (.67) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89) (.89)
Wt./C Lbs.
kg
68 69 70 70 70 77 78 83 84 85 87 94 96 98 99 100 102 104 106 108 110 112 114 115 117 119 121 123 125 126 128 128 160 185
(30.8) (31.3) (31.8) (31.8) (31.8) (34.9) (35.4) (37.6) (38.1) (38.6) (39.5) (42.6) (43.5) (44.4) (44.9) (45.4) (46.3) (47.2) (48.1) (49.0) (49.9) (50.8) (51.7) (52.2) (53.1) (54.0) (54.9) (55.8) (56.7) (57.2) (58.1) (58.1) (72.6) (83.9)
Pipe/Conduit Clamps & Hangers
O.D. CLAMPS
Pipe Clamps B1508 THRU B1564S
Design Load
CONDUIT/STRUT CLAMPS • Safety Factor of 3 • Clamps without saddles are not recommended for flexible conduit or cable • All Sizes Include: 1/4”-20 Slotted Hex Head Machine Screw • Standard finish: ZN
Setscrew
Pipe/Conduit Clamps & Hangers
Thickness
B1508S THRU B1524S B1508 THRU B1520 B1532S THRU B1564S
Part No. B1508 B1512 B1516 B1520 B1508S B1512S B1516S B1520S B1524S B1532S B1534S B1540S B1548S B1556S B1564S
EMT
Use With Rigid Conduit
1/2”
(15)
–
–
3/4”
(20)
1/2”
(15)
1” 11/4” 1/2” 3/4” 1” 1 1 /4” 11/2” 2” – 21/2” 3” 31/2” 4”
(25)
3/4”
(20)
(32)
1” – 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4”
(25)
(15) (20) (25) (32) (40) (50)
– (65) (80) (90) (100)
– (15) (20) (25) (32) (40) (50) (65) (80) (90) (100)
Design Load Thickness 16 16 14 14 16 16 14 14 12 12 12 12 12 12 12
Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga.
(1.5) (1.5) (1.9) (1.9) (1.5) (1.5) (1.9) (1.9) (2.6) (2.6) (2.6) (2.6) (2.6) (2.6) (2.6)
Lbs.
200 200 300 300 200 200 300 300 400 400 400 400 400 400 400
Wt./C
kN
Lbs.
kg
(.89)
7.4 8.0 11.0 12.5 8.6 9.2 12.7 14.6 20.5 21.5 22.7 26.0 30.2 33.3 36.6
(3.4)
(.89) (1.33) (1.33) (.89) (.89) (1.33) (1.33) (1.78) (1.78) (1.78) (1.78) (1.78) (1.78) (1.78)
(3.6) (5.0) (5.7) (3.9) (4.2) (5.8) (6.6) (9.3) (9.8) (10.3) (11.9) (13.7) (15.1) (16.6)
Reference page 126 for general fitting and standard finish specifications.
132
Strut Systems
Pipe Clamps B2601 THRU B2610 TWIST EAR™ PIPE CLAMP • One piece break apart, screw retainer, thread impressions • Tighter alignment, no need to leave additional space between clamps in order to access nut and bolt • Easier access bolt can be tightened directly from front • Available in 1/2”, 3/4”, 1” rigid and EMT Conduit • Recommended Torque 30 in. - lbs. • Safety Factor of 3 • Standard finish: ZN
Design Load B-Line B26093/4 3/4" ST D
B-Line B26093/4 3/4" ST D
B2601 B2602 B2603 B2608 B2609 B2610
EMT
Use With Rigid Conduit
1/2”
(17.9)
3/4”
(23.4)
1” – – –
(29.5)
– – – 1/2” 3/4” 1”
– – –
– – – (21.3) (26.7) (33.4)
Break-apart - break in the middle, bolt the ends together.
Design Load Thickness 16 14 14 16 14 14
Lbs.
Ga. Ga. Ga. Ga. Ga. Ga.
300 500 500 300 500 500
Wt./C
kN
Lbs.
kg
(1.34)
8.2 13.5 15.6 8.2 13.5 15.6
(3.7)
(2.24) (2.24) (1.34) (2.24) (2.24)
BP081SS THRU BP475SS
No loose pieces. One piece break apart with screw retainer and thread impressions.
(6.1) (7.1) (3.7) (6.1) (7.1)
Design Load
P CLAMPS • Minimizes induction heating • Material: Stainless Steel Type 304
Setscrew
W O.D. Size
H 14 Gauge
O.D. Size Part No. BP081SS BP110SS BP135SS BP175SS BP205SS BP250SS BP300SS BP325SS BP375SS BP425SS BP475SS
In.
mm
.250-.840 (6.4-21.3) .810-1.100 (20.6-28.0) .850-1.350 (21.6-34.8) 1.250-1.750 (31.8-44.4) 1.550-2.050 (39.4-52.1) 2.00-2.50 (50.8-63.5) 2.55-3.00 (64.7-76.2) 2.75-3.25 (69.9-82.8) 3.25-3.75 (82.6-95.3) 3.75-4.25 (95.3-108.0) 4.25-4.75 (108.0-120.7)
Height H
Width W
Design Load
Wt/C.
In.
mm
In.
mm
Lbs.
kN
Lbs.
kg
1.86 2.18 2.25 2.78 3.00 3.43 3.87 4.06 4.60 5.13 5.70
(47.2) (55.4) (57.2) (70.6) (76.2) (87.1) (97.8) (103.1) (116.8) (130.3) (5.70)
0.87 1.19 1.38 1.78 2.28 2.83 3.15 3.28 3.83 4.50 4.85
(22.1) (30.2) (35.1) (45.2) (57.9) (71.9) (80.0) (83.3) (97.3) (114.3) (123.2)
300 300 300 300 300 300 300 300 300 300 300
(1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33) (1.33)
9.0 12.0 14.0 21.0 30.0 35.0 39.0 41.0 47.0 54.0 58.0
(4.1) (5.4) (6.3) (9.5) (13.6) (15.9) (17.7) (18.6) (21.3) (24.4) (26.3)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
133
Pipe/Conduit Clamps & Hangers
Allows for multiple clamps to be used in succession, with easier access than other pipe clamps.
Part No.
B-Line B26093/4 3/4" ST D
B-Line B26093/4 3/4" STD
VibraClamp™ Pipe Clamps Design Load 1
BVT SERIES VIBRACLAMP - COPPER & O.D. • • • • • • • • • • • •
Safety Factor of 3 Accesses tubing sizes 1/8” (3) to 6” (150) Allows easy one tool installation Endures both high (+300°F) and low (-40°F) temperatures Dampens vibration and noise Eliminates galvanic metal to metal contact Resists most industrial oils and solvents Reduces thermal loss and gain Secures tubing firmly to channel (strut) Dielectric strength of 400 volts/mil Includes cushion, clamp, screw and nut Standard finishes: YZN, SS4
Pipe/Conduit Clamps & Hangers
Catalog Number BVT025 BVT037 BVT050 BVT062 BVT075 BVT087 BVT100 BVT112 BVT125 BVT137 BVT150 BVT162 BVT175 BVT187 BVT200 BVT212 BVT225 BVT250 BVT262 BVT300 BVT312 BVT362 BVT412 BVT612 Catalog Number
Tubing O.D. Size 1/4” 3/8” 1/2” 5/8” 3/4” 7/8”
1” 11/8” 11/4” 13/8” 11/2” 15/8” 13/4” 17/8” 2” 21/8” 21/4” 21/2” 25/8” 3” 31/8” 35/8” 41/8” 61/8”
Design Load 1 Lbs.
BVT025 BVT037 BVT050 BVT062 BVT075 BVT087 BVT100 BVT112 BVT125 BVT137 BVT150 BVT162 BVT175 BVT187 BVT200 BVT212 BVT225 BVT250 BVT262 BVT300 BVT312 BVT362 BVT412 BVT612
(6.3) (9.5) (12.7) (15.9) (19.0) (22.2) (25.4) (28.6) (31.7) (34.9) (38.1) (41.3) (44.4) (47.6) (50.8) (54.0) (57.1) (63.5) (66.6) (76.2) (79.4) (92.1) (104.8) (155.5)
400 400 400 400 600 600 600 600 600 600 600 800 800 800 800 800 800 800 800 800 800 1000 1000 1000
kN (1.78) (1.78) (1.78) (1.78) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45)
Copper Tubing Size 1/8” 1/4” 3/8” 1/2” 5/8” 3/4”
– 1” – 11/4” – 11/2” – – – 2” – – 21/2” – 3” 31/2” 4” 6”
(3) (6) (10) (15) (17) (20)
– (25)
– (32)
– (40)
– – – (50)
– – (65)
– (80) (90) (100) (150)
Design Load 2
A B C Dimensions B
A 1.22 1.36 1.49 1.62 1.87 2.00 2.25 2.25 2.51 2.51 2.74 3.00 3.13 3.28 3.52 3.52 3.64 3.91 4.02 4.42 4.53 5.05 5.55 7.62
(30.9) (34.5) (37.8) (41.1) (47.4) (50.8) (57.1) (57.1) (63.7) (63.7) (69.6) (76.2) (79.5) (83.3) (89.4) (89.4) (92.4) (99.3) (102.1) (112.2) (115.0) (128.2) (140.9) (193.5)
Design Load 2
Design Load 3
Lbs.
Lbs.
50 50 50 50 75 75 75 75 75 75 75 125 125 125 125 125 125 125 125 125 125 200 200 200
kN (0.22) (0.22) (0.22) (0.22) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.89) (0.89) (0.89)
50 50 50 50 75 75 75 75 75 75 75 125 125 125 125 125 125 125 125 125 125 150 150 150
Design Load 3
0.19 0.25 0.31 0.38 0.50 0.56 0.69 0.69 0.81 0.81 0.88 1.00 1.06 1.13 1.25 1.25 1.31 1.43 1.50 1.68 1.75 2.00 2.25 3.25
(4.8) (6.3) (7.8) (9.6) (12.7) (14.2) (17.5) (17.5) (20.6) (20.6) (22.4) (25.4) (26.9) (28.7) (31.7) (31.7) (33.2) (36.3) (38.1) (42.6) (44.4) (50.8) (57.1) (82.5)
Wt./C C
Lbs.
kg
0.49 (12.4) 0.61 (15.5) 0.74 (18.8) 0.86 (21.8) 1.15 (29.2) 1.27 (32.2) 1.52 (38.6) 1.52 (38.6) 1.78 (45.2) 1.78 (45.2) 1.96 (49.8) 2.20 (55.9) 2.33 (59.1) 2.46 (62.5) 2.70 (68.6) 2.70 (68.6) 2.83 (71.8) 3.11 (79.0) 3.20 (81.3) 3.61 (91.6) 3.70 (93.9) 4.23 (107.4) 4.73 (120.1) 6.74 (171.1)
11 12 14 15 19 21 22 26 36 38 35 40 44 40 55 55 54 56 55 67 64 76 93 136
(5.0) (5.4) (6.3) (6.8) (8.6) (9.5) (10.0) (11.8) (16.3) (17.2) (15.9) (18.1) (19.9) (18.1) (25.0) (25.0) (24.5) (25.4) (25.0) (30.4) (29.0) (34.5) (42.2) (61.6)
kN (0.22) (0.22) (0.22) (0.22) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.56) (0.67) (0.67) (0.67)
Reference page 126 for general fitting and standard finish specifications.
134
Strut Systems
VibraClamp™ Pipe Clamps BVP SERIES VIBRACLAMP - IRON PIPE & RIGID CONDUIT • • • • • • • • • • • •
Safety Factor of 3 Accesses pipe sizes 1/4” (6) to 6” (150) Allows easy one tool installation Endures both high (+300°F) and low (-40°F) temperatures Dampens vibration and noise Eliminates galvanic metal to metal contact Resists most industrial oils and solvents Reduces thermal loss and gain Secures pipe firmly to channel (strut) Dielectric strength of 400 volts/mil Includes cushion, clamp, screw and nut Standard finishes: YZN, SS4
Design Load 1
Design Load 2
A Design Load 3
B C
BVP025 BVP037 BVP050 BVP075 BVP100 BVP125 BVP150 BVP200 BVP250 BVP300 BVP350 BVP400 BVP500 BVP600
Catalog Number
Nominal Pipe Size 1/4” 3/8” 1/2” 3/4”
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6”
Design Load 1 Lbs.
BVP025 BVP037 BVP050 BVP075 BVP100 BVP125 BVP150 BVP200 BVP250 BVP300 BVP350 BVP400 BVP500 BVP600
(6.3) (9.5) (12.7) (19.0) (25.4) (31.7) (38.1) (50.8) (63.5) (76.2) (88.9) (101.6) (127.0) (152.4)
400 600 600 600 600 800 800 800 800 1000 1000 1000 1000 1000
kN (1.78) (2.67) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (4.45) (4.45) (4.45) (4.45) (4.45)
Steel O.D. Size 0.540 0.675 0.875 1.050 1.312 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625
(13.7) (17.1) (22.2) (26.7) (33.3) (42.2) (48.3) (60.3) (73.0) (88.9) (101.6) (114.3) (141.3) (168.3)
Dimensions B
A 1.61 1.86 1.99 2.25 2.51 3.00 3.21 3.77 4.28 5.05 5.55 6.05 6.84 8.24
(39.9) (47.2) (50.5) (57.1) (63.8) (76.2) (83.1) (95.8) (108.7) (128.3) (140.9) (153.7) (173.7) (209.3)
Design Load 2
Design Load 3
Lbs.
Lbs.
50 75 75 75 75 125 125 125 125 200 200 200 200 200
kN (0.22) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.89) (0.89) (0.89) (0.89) (0.89)
50 75 75 75 75 125 125 125 125 150 150 150 150 150
0.37 0.50 0.56 0.69 0.81 1.00 1.12 1.37 1.62 2.00 2.25 2.50 3.00 3.56
(9.4) (12.7) (14.2) (17.5) (20.6) (25.4) (28.4) (34.8) (41.1) (50.8) (57.1) (63.5) (76.2) (90.4)
C 0.87 1.15 1.27 1.52 1.77 2.21 2.41 2.96 3.46 4.24 4.74 5.24 6.24 7.36
(22.1) (29.2) (32.3) (38.6) (45.0) (56.1) (62.3) (75.2) (87.9) (107.7) (120.3) (133.1) (158.4) (186.9)
kN (0.22) (0.33) (0.33) (0.33) (0.33) (0.56) (0.56) (0.56) (0.56) (0.67) (0.67) (0.67) (0.67) (0.67)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
135
Wt./C Lbs.
kg
15 18 20 21 20 36 40 45 54 81 87 109 136 163
(6.8) (8.2) (9.1) (9.5) (9.1) (16.3) (18.1) (20.4) (24.5) (36.7) (39.4) (49.4) (61.6) (73.8)
Pipe/Conduit Clamps & Hangers
Catalog Number
Armafix™ Clamps & Accessories IPH SERIES
Pipe/Conduit Clamps & Hangers
INSERTS - INSERTS WITH CLAMPS • Engineered load-bearing inserts prevents insulation compression 1/2” Wall Insulation Thickness • Innovative insulated pipe support • Desirable “Foam-to-Foam” Bond Assembly Insert Only Pipe/Copper/OD Hanger • Slip Data: 45 lbs. (0.20 kN) max Part No. Part No. Size Size* • Recommended Clamp Torque: 12-15 in-lbs. (1.3-1.7 Nm) 3 /8” O.D. 11/4” IPH03812 IPH03812WO • Service Temperature Range 1/2” O.D. 11/4” IPH01212 IPH01212WO -58°F (-50°C) to +220°F (+105°C) 5/8” O.D. 11/2” IPH05812 IPH05812WO 3/4” O.D. 11/2” IPH03412 IPH03412WO 7/8” O.D. 2” IPH07812 IPH07812WO 2” IPH11812 IPH11812WO 3/4” IPS & 11/8” O.D. 21/2” IPH13812 IPH13812WO 13/8” O.D. 5 21/2” IPH15812 IPH15812WO 1 /8” O.D. 1 7 3” IPH11012 IPH11012WO 1 /2” IPS & 1 /8” O.D. 3” IPH21812 IPH21812WO 21/8” O.D. 5 1 / 8 ” O.D. 3 /2” IPH25812 IPH25812WO 2 Insert Only Assembly Insert & Clamp 4” IPH31812 IPH31812WO 31/8” O.D. 5” IPH35812 IPH35812WO 35/8” O.D. 6” IPH41812 IPH41812WO 41/8” O.D. 3/4” Wall Insulation Thickness IPH40012 IPH40012WO 4” IPS 6” IPH50012 IPH50012WO 5” IPS 8” Assembly Insert Only Pipe/Copper/OD Hanger IPH60012 IPH60012WO 6” IPS 8” Part No. Part No. Size Size* IPH03834 IPH01234 IPH05834 IPH07834 IPH11834 IPH13834 IPH15834 IPH11034 IPH21834 IPH25834 IPH31834 IPH35834 IPH41834 IPH40034 IPH50034 IPH60034 IPH80034
3/8” O.D. IPH03834WO 1/2” O.D. IPH01234WO 5/8” O.D. IPH05834WO 7/8” O.D. IPH07834WO 3 IPH11834WO /4” IPS & 11/8” O.D. IPH13834WO 13/8” O.D. IPH15834WO 15/8” O.D. IPH11034WO 11/2” IPS & 17/8” O.D. IPH21834WO 21/8” O.D. IPH25834WO 25/8” O.D. IPH31834WO 31/8” O.D. IPH35834WO 35/8” O.D. IPH41834WO 41/8” O.D. IPH40034WO 4” IPS IPH50034WO 5” IPS IPH60034WO 6” IPS IPH80034WO 8” IPS
* Recommended pipe hanger size for insulation thickness shown. (Order hanger separately)
2” 2” 2” 21/2” 21/2” 3” 31/2” 31/2” 4” 5” 5” 6” 6” 6” 8” 10” 12”
1” Wall Insulation Thickness Assembly Part No. IPH05810 IPH03410 IPH07810 IPH11810 IPH13810 IPH15810 IPH11010 IPH21810 IPH25810 IPH31810 IPH35810 IPH41810 IPH40010 IPH50010 IPH60010 IPH80010
* Recommended pipe hanger size for insulation thickness shown. (Order hanger separately)
IPH18230 ARMAFLEX®† INSUALTION TAPE • 30 ft. (9.14 M) roll
Insert Only Pipe/Copper/OD Hanger Part No. Size Size* 5/8” O.D. IPH05810WO 21/2” 3 /4” O.D. 21/2” IPH03410WO 7 /8” O.D. 3” IPH07810WO 3” IPH11810WO 3/4” IPS & 11/8” O.D. 31/2” IPH13810WO 13/8” O.D. 31/2” IPH15810WO 15/8” O.D. 4” IPH11010WO 11/2” IPS & 17/8” O.D. 4” IPH21810WO 21/8” O.D. 5” IPH25810WO 25/8” O.D. 5” IPH31810WO 31/8” O.D. 6” IPH35810WO 35/8” O.D. 6” IPH41810WO 41/8” O.D. IPH40010WO 4” IPS 8” IPH50010WO 5” IPS 8” IPH60010WO 6” IPS 10” IPH80010WO 8” IPS 12”
* Recommended pipe hanger size for insulation thickness shown. (Order hanger separately)
†Armaflex® is a registared trademark of Armacell.
Reference page 126 for general fitting and standard finish specifications.
136
Strut Systems
Virba Cushion™ Accessories B1999
FEATURES
VIBRA CUSHION™
Vibra Cushion™ is designed for use with refrigeration lines, HVAC, copper tubing, glass pipe and hydraulic lines. It provides an energy-absorption barrier between the lines and the mounting material and remains flexible thru its entire service range of -75°F (-60°C) to +375°F (+199°C).
• • • • •
Packaged 20 Ft. (6.09 m) per carton Ideal Isolation Material Inhibits Galvanic Corrosion Dampens Sound and Vibrations Service Temperature Range -75°F (-60°C) to +375°F (+199°C) • Wt./Carton 3.8 Lbs. (1.7 kg)
This elastomer allows for expansion and contraction within the mounting system and prevents galvanic reaction between dissimilar metals.
FOR RIGID CONDUIT OR IRON PIPE Nominal Size 3/8” (10) 1/2” (15) 3/4” (20) 1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100) 5” (125) 6” (150)
15/8” (41.3)
Length of Use Vibra-Cushion Clamp No. 21/8” (54.0) B2002 25/8” (66.7) B2009 31/4” (82.5) B2031 41/8” (104.8) B2004 53/16” (131.8) B2012 515/16” (150.8) B2038 71/2” (190.5) B2042 9” (228.6) B2046 11” (279.4) B2051 121/2” (317.5) B2055 141/2” (368.3) B2059 177/16” (442.9) B2067 203/4” (527.0) B2116
FOR THINWALL (EMT) CONDUIT Nominal Size
Length of Use Vibra-Cushion Clamp No.
3/8” (10) 1/2” (15)
113/16” (46.0) 213/16” (58.7) 27/8” (73.0) 35/8” (92.1) 43/8” (120.6) 57/16” (138.1) 67/8” (174.6)
3/4” (20)
1” 11/4” 11/2” 2”
(25) (32) (40) (50)
B2027 B2002 B2003 B2032 B2036 B2012 B2013
• • • • •
Non-adhesive rubber tape Fuses to itself Water resistant Ideal Isolation Material Prevents galvanic reaction caused by dissimilar metal contact • Temperature Range -140°F (-60°C) to +395°F (+200°C)
• Fits securely in 15/8” wide channel • Temperature range: -20°F to 212°F • Ideal Isolation & Vibration Dampening Qualities • 45 durometer hardness • Material: Neoprene
1” (25.4)
ISO
Thickness
Length of Use Vibra-Cushion Clamp No. 13/16” (30.2) B2026 19/16” (39.7) B2027 17/8” (47.6) B2008 25/16” (58.7) B2029 23/4” (69.8) B2030 31/2” (88.9) B2032 45/16” (109.5) B2011 51/8” (130.2) B2036 611/16” (169.9) B2013 81/4” (209.5) B2014 913/16” (249.2) B2048 113/8” (288.9) B2052 1215/16” (328.6) B2056 161/8” (409.6) B2064 191/4” (488.9) B2112 251/2” (647.7) B2128
BVS Type - Vibra Strip™ for 15/8" (41.3) wide B-Line channel
ISO PIPE
Part No.
Nominal Size 1/4” (6) 3/8” (10) 1/2” (15) 5/8” (17) 3/4” (20) 1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100) 5” (125) 6” (150) 8” (200)
Ft./Roll
In.
mm
Ft.
m
Part No.
.020
(0.5)
36
(11)
BVS-12 BVS-120
Max. Load Lbs. per Lineal In. Lbs. kg/25.4 mm 40 40
(18.1) (18.1)
Length 12” (304.8) 120” (3048.0)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
137
Wt. Std. Each Pkg. Lbs. kg 25 25
.46 (.21) 4.60 (2.08)
Pipe/Conduit Clamps & Hangers
FOR COPPER TUBING TYPE L & K
Pipe Clamps Design Load 1
B2400 SERIES STANDARD PIPE STRAP
Pipe Size
• • • • •
Safety Factor of 5 B2400-3/4 thru B2400-8 are UL listed Order hardware separately Other sizes available upon request Material: Sizes - 1/2” - 11/2”, ASTM A1011 33,000 PSI min. yield; 2” - 12”, ASTM A1018 33,000 PSI min. yield; Design Load 14”-Larger, ASTM A36 3 • Standard finish: ZN • Ductile Iron Sizes Available • Meets requirements of MSS SP-58 & SP-69 Type 26
Pipe/Conduit Clamps & Hangers
Part No. B2400-1/2 B2400-3/4 B2400-1 B2400-11/4 B2400-11/2 B2400-2 B2400-21/2 B2400-3 B2400-31/2 B2400-4 B2400-5 B2400-6 B2400-8 B2400-10 B2400-12 B2400-14 B2400-16 B2400-18 B2400-20 B2400-24 Part No.
B2400-1/2 B2400-3/4 B2400-1 B2400-11/4 B2400-11/2 B2400-2 B2400-21/2 B2400-3 B2400-31/2 B2400-4 B2400-5 B2400-6 B2400-8 B2400-10 B2400-12 B2400-14 B2400-16 B2400-18 B2400-20 B2400-24
Pipe Size 1/2” 3/4”
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) (350) (400) (460) (510) (610)
A 5/16” 5/16” 5/16” 5/16” 5/16” 7/16” 7/16” 7/16” 7/16” 9/16” 9/16” 9/16” 9/16” 9/16” 9/16” 15/16” 15/16” 15/16” 15/16” 15/16”
Design Load 1
B (7.9) (7.9) (7.9) (7.9) (7.9) (11.1) (11.1) (11.1) (11.1) (14.3) (14.3) (14.3) (14.3) (14.3) (14.3) (23.8) (23.8) (23.8) (23.8) (23.8)
7/16” 7/16” 7/16” 7/16” 7/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16” 11/16”
11/2” 11/2” 13/4” 13/4” 13/4”
Hole Size
A C B W
C 213/16” 3” 317/32” 33/4” 41/16” 521/32” 65/32” 625/32” 79/32” 725/32” 87/8” 915/16” 1131/32” 14” 16” 203/4” 223/4” 27” 29” 33”
(11.1) (11.1) (11.1) (11.1) (11.1) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (17.4) (38.1) (38.1) (44.4) (44.4) (44.4)
Design Load 2
T (71.4) (76.2) (89.7) (95.2) (103.2) (143.6) (156.3) (172.2) (184.9) (197.6) (225.4) (252.4) (304.0) (355.6) (406.4) (527.0) (577.8) (685.8) (736.6) (838.2)
T
10 10 10 10 10
Ga. Ga. Ga. Ga. Ga. 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 3/8” 3/8” 1/2” 1/2” 1/2”
Design Load 3
Design Load 2
W (3.4) (3.4) (3.4) (3.4) (3.4) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (9.5) (9.5) (12.7) (12.7) (12.7)
15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 13/4” 13/4” 13/4” 13/4” 13/4”
(41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (44.4) (44.4) (44.4) (44.4) (44.4)
Wt./C
Lbs.
kN
Lbs.
kN
Lbs.
kN
Lbs.
600 600 600 600 600 1200 1200 1200 1200 1500 1500 1500 2000 2000 2000 2000 2000 2000 2000 2000
(2.67) (2.67) (2.67) (2.67) (2.67) (5.34) (5.34) (5.34) (5.34) (6.67) (6.67) (6.67) (8.90) (8.90) (8.90) (8.90) (8.90) (8.90) (8.90) (8.90)
150 150 150 150 150 480 480 480 480 600 600 600 800 800 800 800 800 800 800 800
(.67) (.67) (.67) (.67) (.67) (2.14) (2.14) (2.14) (2.14) (2.67) (2.67) (2.67) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56) (3.56)
105 105 120 120 120 180 180 300 300 450 450 450 600 600 600 600 600 600 600 600
(.47) (.47) (.53) (.53) (.53) (.80) (.80) (1.33) (1.33) (2.00) (2.00) (2.00) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67) (2.67)
23 26 31 36 39 93 106 132 151 160 192 219 297 465 560 761 861 1297 1426 1682
kg (10.4) (11.8) (14.0) (16.3) (17.7) (42.2) (48.1) (59.9) (68.5) (72.6) (87.1) (99.3) (134.7) (210.9) (254.0) (345.2) (390.5) (588.3) (646.8) (762.9)
Reference page 126 for general fitting and standard finish specifications.
138
Strut Systems
Pipe Clamps B437 SERIES TWO PIECE PIPE STRAP • Clamp halves can turn allowing pipe to be fastened to channel at any direction • Order hardware separately • Standard finish: ZN Wt./C Part No.
1/2”
(15)
3/4”
(20)
1”
(25)
11/4”
(32)
11/2”
(40)
2” 21/2” 3” 31/2” 4” 5” 6” 8”
(50)
A 5
/16” /16” 5 /16” 5 /16” 5 /16” 7 /16” 7 /16” 7 /16” 7 /16” 9 /16” 9 /16” 9 /16” 9 /16” 5
(65) (80) (90) (100) (125) (150) (200)
T (7.9) (7.9) (7.9) (7.9) (7.9)
10 10 10 10 10
(11.1) (11.1) (11.1) (11.1) (11.1) (11.1) (11.1) (11.1)
Ga. Ga. Ga. Ga. Ga. 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”
(3.4) (3.4) (3.4) (3.4) (3.4) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3) (6.3)
Lbs.
kg
22 26 30 35 38 91 104 130 149 158 190 217 295
(10.0)
T
(11.8) (13.6) (15.9)
Hole Size
(17.2)
A
(41.3) (47.2) (58.9) (67.6) (71.6) (86.2) (98.4) (133.8)
B2417 STRUT MOUNTED PIPE GUIDE
14 Gauge (1.9)
• Copper tubing sizes available - B2417CT Series • Standard finish: ZN Minimum Part No. B2417-1/2 B2417-3/4 B2417-1 B2417-11/4 B2417-11/2 B2417-2 B2417-21/2 B2417-3 B2417-31/2
Pipe Size 1
/2" /4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 3
Includes
Radial Clearance Clamp No.
(15)
1
(1.6)
(20)
1
(1.6)
/16" /16" 3 /32" 3 /32" 3 /32" 1 /8" 1 /8" 5 /32" 5 /32"
(25) (32) (40) (50) (65) (80) (90)
(2.3) (2.3) (2.3) (3.2) (3.2) (3.9) (3.9)
Pipe/Conduit Clamps & Hangers
B437-1/2 B437-3/4 B437-1 B437-11/4 B437-11/2 B437-2 B437-21/2 B437-3 B437-31/2 B437-4 B437-5 B437-6 B437-8
Pipe Size
B2009 B2010 B2034 B2037 B2039 B2043 B2047 B2016 B2017
Wt./C Lbs.
kg
22 25 30 47 51 62 69 108 118
(10.0) (11.3) (13.6) (21.8) (23.1) (28.1) (31.3)
Clearance
(49.0) (53.5)
B2070 THRU B2080 PARALLEL PIPE CLAMP • Safety Factor of 2 • Designed to support pipe or rigid conduit • Includes: 1 pr. Pipe Clamps 1 pc. Stand Off Plate 1 pc. Slotted Hex Head Machine Screws Pipe 1 pc. Square Nut Size • Standard finish: ZN A dimension, from bottom of channel to center of pipe.
A
Design Load
Part No. B2070 B2071 B2072 B2073 B2074 B2075 B2076 B2077 B2078 B2079 B2080
Pipe Size 3/8” (10) 1/2” (15) 3/4” (20) 1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100)
A 111/16” 13/4” 17/8” 2” 23/16” 25/16” 29/16” 27/8” 33/16” 37/16” 35/8”
(42.9) (44.4) (47.6) (50.8) (55.6) (58.7) (65.1) (73.0) (80.9) (87.3) (92.1)
Material Design Load Thickness Lbs. kN 16 Ga. (1.5) 300 (1.33) 16 Ga. (1.5) 300 (1.33) 14 Ga. (1.9) 300 (1.33) 14 Ga. (1.9) 400 (1.78) 14 Ga. (1.9) 400 (1.78) 12 Ga. (2.6) 500 (2.22) 12 Ga. (2.6) 500 (2.22) 12 Ga. (2.6) 500 (2.22) 12 Ga. (2.6) 500 (2.22) 11 Ga. (3.0) 500 (2.22) 11 Ga. (3.0) 500 (2.22)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
139
Wt./C Lbs.
kg
24 26 30 33 36 50 55 60 66 85 95
(10.9) (11.8) (13.6) (14.9) (16.3) (22.7) (24.9) (27.2) (29.9) (38.5) (43.1)
Pipe Clamps B670 SERIES
B671 SERIES
PARALLEL PIPE CLAMP
EDGE PIPE CLAMP
• Designed to support pipe or rigid conduit parallel to the edge of a beam or angle iron • Hardware included • Material: Malleable Iron • Standard finish: HDG
• Designed to support pipe or rigid conduit perpendicular to the edge of a beam or angle iron • Hardware included • Material: Malleable Iron • Standard finish: HDG
Pipe/Conduit Clamps & Hangers
Part Number
Pipe or Conduit Wt./C Size Lbs. kg
B670-3/8 B670-1/2 B670-3/4 B670-1 B670-11/4 B670-11/2 B670-2 B670-21/2 B670-3 B670-31/2 B670-4
3/8”
32 58 64 70 77 93 105 143 164 190 205
(10) (15) (20) (25) (32) (40) (50) (65) (80) (90) (100)
1/2” 3/4”
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4”
(14.5) (26.3) (29.0) (31.7) (34.9) (42.2) (47.6) (64.8) (74.4) (86.2) (93.0)
Part Number
Pipe or Conduit Wt./C Size Lbs. kg
B671-1/2 B671-3/4 B671-1 B671-11/4 B671-11/2 B671-2 B671-21/2 B671-3
1/2”
(15) (20) (25) (32) (40) (50) (65) (80)
3/4”
1” 11/4” 11/2” 2” 21/2” 3”
67 71 85 91 115 135 183 230
(30.4) (32.2) (38.5) (41.3) (52.1) (61.2) (83.0) (104.3)
B422 SERIES RIGHT ANGLE CLAMP • Safety Factor of 5 • Material: 7 Gauge (4.5) • Standard finishes: ZN, SS4
Part No. B422-1/2 B422-3/4 B422-1 B422-11/4 B422-11/2 B422-2 B422-21/2 B422-3 B422-31/2 B422-4
Design Load Vertical Pull
Conduit Size 1/2” 3/4”
1” 11/4” 11/2” 2 21/2” 3” 31/2” 4”
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100)
A 23/8” 23/8” 27/8” 27/8” 31/4” 311/16” 41/4” 47/8” 57/16” 6”
(60.3) (60.3) (73.0) (73.0) (82.5) (93.7) (107.9) (123.8) (138.1) (152.4)
Lbs.
kg
Lbs.
kg
250 300 400 400 500 600 700 800 900 1000
(1.11) (1.33) (1.78) (1.78) (2.22) (2.67) (3.11) (3.56) (4.00) (4.45)
38 39 48 50 59 75 98 111 123 135
(17.2) (17.7) (21.8) (22.7) (26.7) (34.0) (44.4) (50.3) (55.8) (61.2)
3/8” (9.5)
B3367S
RETAINING STRAP
x 1/2”
A
Wt./C
B3367S-1
U-Bolt and Hex Nuts Design Load Vertical Pull
13 Gauge (2.3)
(12.7)
Slots
• Available in ‘L’ lengths of 6” (152.4), 8” (203.2), 9” (228.6), 10” (254,0), 12” (304.8), 14” (355.6), 16” (406.4), 18” (457.2) • Material: Steel • Standard finishes: ZN, PLN
L 21/4” (57.1)
Part No. B3367S-1-L B3367S-2-L
Hole Dia. D
For Use With
7/16” (30.1) 9/16” (30.1)
B422-1/2 & 3/4 B422-1, 11/4 & 11/2
Wt./C** Lbs.
kg
3/8” Dia. (19.0)
33.4 (5.8) 12.8 (15.1)
B3367S-2 12 Gauge (2.6)
3
/4” ** Wt./C based on 6” (152.4) length. For each additional inch (19.0) in strap length add the following to the Wt./C. For B3367S-1 add 5.7 Lbs (2.6 kg) For B3367S-2 add 2.2 Lbs (1.0 kg) Note: Use Fig. 69 (Old B3367-3/8 retaining strap, page 115) for B422-2 thru 4
L
Reference page 126 for general fitting and standard finish specifications.
140
Strut Systems
Pipe Clamps B2301 SERIES ONE HOLE EMT STRAP
Hole Dia.
• Standard finish: ZN
W T Part No.
T
1/2”
(15)
3/4”
(20)
1” 1 1 /4” 11/2” 2”
(25)
.050 .050 .050 .065 .090 .090
(32) (40) (50)
Hole Dia.
W
Wt./C
(1.3)
3/4”
(19.0)
9/32”
(7.1)
(1.3)
7/8”
(22.2)
9/32”
(7.1)
(1.3)
1” 1 1 /4” 1” 11/4”
(25.4)
9/32”
(7.1)
(31.7)
9/32”
(7.1)
(25.4)
11/32”
(8.7)
(31.7)
13/32”
(10.3)
(1.6) (2.3) (2.3)
Lbs.
kg
2.4 4.2 8.3 11.0 14.8 21.6
(1.1) (1.9) (3.7) (5.0)
Pipe/Conduit Clamps & Hangers
B2301-1/2 B2301-3/4 B2301-1 B2301-11/4 B2301-11/2 B2301-2
Conduit Size
(6.7) (9.8)
B2302 SERIES ONE HOLE RIGID CONDUIT/PIPE STRAP • Standard finish: ZN Part No.
Conduit/Pipe Size
B2302-1/4
1/4”
(6)
B2302-3/8 B2302-1/2 B2302-3/4 B2302-1 B2302-11/4 B2302-11/2 B2302-2 B2302-21/2 B2302-3 B2302-31/2 B2302-4
3/8”
(10)
1/2”
(15)
3/4”
(20)
1” (25) 11/4” (32) 11/2” (40) 2” (50) 21/2” (65) 3” (80) 31/2” (90) 4” (100)
T .045 .050 .050 .050 .065 .065 11 Ga. 11 Ga. 7 Ga. 7 Ga. 1/4” 1/4”
Hole Dia.
W (1.1)
5/8”
(1.3)
3/4”
(1.3)
Wt./C Lbs.
(15.9)
13/64”
(5.1)
(19.0)
9/32”
(7.1)
7/8”
(22.2)
9/32”
(7.1)
(1.3)
7/8”
(22.2)
9/32”
(7.1)
(1.6)
1” 11/4” 1” 1 1 /4” 11/4” 11/4” 11/4” 11/4”
(25.4)
9/32”
(7.1)
(31.7)
21/64”
(8.3)
(25.4)
.380 .389 .665 .650 .622 .630
(9.6)
(1.6) (3.0) (3.0) (4.5) (4.5) (6.3) (6.3)
(31.7) (31.7) (31.7) (31.7) (31.7)
(9.9) (16.9) (16.5) (15.8) (16.0)
1.4 2.4 3.3 3.8 7.2 11.0 19.2 28.8 55.2 68.0 96.0 108.0
kg (.6) (1.1)
Hole Dia.
(1.5) (1.7) (3.2) (5.0)
W
(8.7)
T
(13.0) (25.0) (30.8) (43.5) (49.0)
B2084 THRU B2091 ONE HOLE O.D. TUBING CLAMP • Material: 14 Gauge (1.9) ASTM A1011 33,000 PSI min. yield • Standard finish: ZN
9/32” (7.1) Dia.
Wt./C Part No. B2084 B2085 B2086 B2087 B2088 B2089 B2090 B2091
O.D. Size
A
1/4”
(6.3)
7/8”
(22.2)
5/16”
(7.9)
29/32”
(23.0)
3/8”
(9.5)
31/32”
(24.6)
1/2”
(12.7)
11/16”
(25.9)
5/8”
(15.9) (19.0)
7/8”
(22.2)
1”
(25.4)
13/32” 15/32” 17/32” 19/32”
(27.8)
3/4”
(29.1) (30.7) (32.2)
Lbs.
kg
4.0 4.2 5.2 5.8 7.1 7.7 8.7 10.0
(1.8)
3/8” (9.5)
(1.9)
15/8”
(2.3)
(41.3)
A
(2.6) (3.2) (3.5) (3.9) (4.5)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
141
O.D. Size
Pipe Clamps Design Load
BL1400 SERIES CONDUIT HANGER • • • •
Safety Factor of 3 Unless noted all sizes fit both rigid (R) and thinwall (EMT) conduit Hardware included Standard finishes: ZN, SS4
W
Conduit Size
A T Hole Size B
Part No
Conduit Size
Pipe/Conduit Clamps & Hangers
1/2” BL1400 3/4” BL1410 BL1420 1” BL1425 11/4” EMT BL1430 11/4” R,11/2” EMT BL1440 11/2” R BL1450 2” BL1460 21/2” BL1470 3” 1 BL1480 3 /2” BL1490 4”
Design Load A
B
T
(15)
29/32”
(23.0)
9/32”
(7.1)
(20)
31/32”
(24.6)
9/32”
(7.1)
(25)
11/4”
(31.7)
9/32”
(7.1)
(31.7)
9/32”
(7.1)
(35.7)
9/32”
(8.7)
(41.3)
11/32” (8.7) 11/32” (8.7)
11/4” (32) 113/32” (40) 15/8” (50) 21/16” (65) 21/16” (80) 21/2” (90) 23/4” (100) 31/2” (32)
(47.6) (52.4) (63.5) (69.8) (88.9)
16 16 16 18 18 16 16 16 16 16 16
11/32” (8.7) 11/32” (8.7) 11/32” (8.7) 11/32” (8.7)
B3373 SERIES
Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga.
W
Lbs.
(1.5)
3/4”
(19.0)
(1.5)
3/4”
(19.0)
(1.5)
3/4”
(19.0)
(1.2)
7/8”
(22.2)
(1.2)
7/8”
(22.2)
(1.5)
1” 11/4” 11/4” 11/4” 11/4” 11/4”
(25.4)
(1.5) (1.5) (1.5) (1.5) (1.5)
(31.7) (31.7) (31.7) (31.7) (31.7)
590 590 590 590 590 755 755 755 820 850 1410
Wt./C
kN
Lbs.
kg
(2.62)
6 7 8 10 10 17 25 26 33 36 40
(2.7)
(2.62) (2.62) (2.62) (2.62) (3.36) (3.36) (3.36) (3.65) (3.78) (6.27)
(3.2) (3.6) (4.5) (4.5) (7.7) (11.3) (11.8) (14.9) (16.3) (18.1)
Pipe Size
RISER CLAMP • • • •
Safety Factor of 3.5 B3373-3/4 thru B3373-8 are UL listed Includes Hex Head Cap Screws and Hex Nuts Standard finishes: ZN, PLN
T W
Part No.
Pipe Size
A
Design Load A
B3373-1/2
1/2”
(15)
B3373-3/4 B3373-1 B3373-11/4 B3373-11/2 B3373-2 B3373-21/2 B3373-3 B3373-31/2 B3373-4 B3373-5 B3373-6 B3373-8
3/4”
(20)
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8”
(25) (32) (32) (40) (50) (65) (80) (90) (100) (100) (100)
9” 91/4” 99/16” 10” 101/4” 103/4” 111/4” 1115/16” 123/8” 127/8” 14” 153/16” 173/4”
(228.6) (234.9) (242.9) (254.0) (260.3) (273.0) (285.7) (303.2) (314.3)
(327.0) (355.6) (385.8) (450.8)
Wt./C
Lbs.
kN
Lbs.
kg
255 255 255 255 255 255 390 530 670 810 1160 1570 2500
(1.13)
101 105 109 112 113 165 180 195 217 228 480 526 957
(45.9)
(1.13) (1.13) (1.13) (1.13) (1.13) (1.73) (2.36) (2.98) (3.60) (5.16) (6.98) (11.12)
(47.7) (49.4) (50.9) (51.1) (75.0) (81.6) (88.4) (98.5) (103.5) (217.7) (238.6) (434.1)
Reference page 126 for general fitting and standard finish specifications.
142
Strut Systems
Pipe Clamps B3690 SERIES ADJUSTABLE J HANGER • Safety Factor of 5 • Material: 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield 11 Ga. (3.0) ASTM A1011 HSLA Gr. 50 Class 1 7 Ga. (4.5) ASTM A1011 33,000 PSI min. yield and 1/4” (6.3) ASTM A1018 33,000 PSI min. yield • Standard finish: ZN
A DIA.
‘D’
C
Rod Take-Out
B
‘E’ Diameter. Is For Wall Mounting
TxW
Felt Line B3690F-SIZE
Design Load
Design Load
Part No. B3690-1/2 B3690-3/4 B3690-1 B3690-11/4 B3690-11/2 B3690-2 B3690-21/2 B3690-3 B3690-31/2 B3690-4 B3690-5 B3690-6 B3690-8
Pipe or Conduit Size
A
B
1/2”
(15)
13/32”
(10.3)
3/4”
(20)
13/32”
(10.3)
(25)
13/32”
(32)
13/32”
(40)
13/32”
(50)
13/32”
(10.3)
(65)
9/16”
(14.3)
(80)
9/16”
(14.3)
(90)
9/16”
(14.3)
(100)
11/16”
(17.5)
(125)
11/16”
(150)
13/16”
(200)
13/16”
1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8”
(10.3) (10.3) (10.3)
(17.5) (20.6) (20.6)
23/32” 211/32” 219/32” 213/16” 31/16” 31/2” 47/16” 47/8” 53/16” 61/8” 63/4” 73/4” 91/4”
C (53.2) (59.5) (65.9) (71.4) (77.8) (88.9) (112.7) (123.8) (131.8) (155.6) (171.4) (196.8) (235.0)
1” 1” 1” 1” 1” 1” 1” 1” 1” 11/4” 11/2” 13/16” 1”
D
E
F
(25.4) 111/16” (42.5) 13/32”
(10.3) 1/4”-20 x 21/4”
(25.4) 113/16” (46.2) 13/32”
(10.3) 1/4”-20 x 21/2”
115/16” (49.2)
13/32”
(10.3) 1/4”-20 x 23/4”
(50.4)
13/32”
(10.3) 1/4”-20 x 3” (10.3) 1/4”-20 x 31/4”
(25.4) (25.4)
2”
(25.4)
21/8”
(53.7)
13/32”
(25.4)
25/16”
(58.7)
13/32”
(10.3) 1/4”-20 x 31/2”
(25.4)
3” 31/8” 33/16” 37/8” 4” 47/16” 415/16”
(76.2)
9/16”
(14.3) 3/8”-16 x 41/2”
(79.4)
9/16”
(14.3) 3/8”-16 x 5”
(81.0)
9/16”
(14.3) 3/8”-16 x 51/2”
(98.4)
9/16”
(14.3) 3/8”-16 x 61/2”
(100.8)
9/16”
(14.3) 3/8”-16 x 71/2”
(112.7)
9/16”
(14.3) 3/8”-16 x 81/2”
(125.4)
9/16”
(14.3) 3/8”-16 x 101/2”
(25.4) (25.4) (31.8) (38.1) (30.2) (25.4)
Design Load Part No. B3690-1/2 B3690-3/4 B3690-1 B3690-11/4 B3690-11/2 B3690-2 B3690-21/2 B3690-3 B3690-31/2 B3690-4 B3690-5 B3690-6 B3690-8
T 12 Ga. 12 Ga. 12 Ga. 12 Ga. 12 Ga. 12 Ga. 11 Ga. 11 Ga. 11 Ga. 7 Ga. 7 Ga. 1/4” 1/4”
W (2.6)
3/4”
(19.0)
(2.6)
3/4”
(19.0)
(2.6)
3/4”
(19.0)
(2.6)
3/4”
(19.0)
(2.6)
3/4”
(19.0)
(2.6)
3/4”
(19.0)
(3.0)
11/4” 11/4” 11/4” 11/4” 11/4” 11/4” 11/2”
(31.7)
(3.0) (3.0) (4.5) (4.5) (6.3) (6.3)
(31.7) (31.7) (31.7) (31.7) (31.7) (38.1)
Wt./C
Lbs.
kN
Lbs.
kg
400 400 400 400 400 400 800 800 800 800 800 1000 1200
(1.78)
20 23 24 27 29 32 71 77 84 139 166 226 332
(9.1)
(1.78) (1.78) (1.78) (1.78) (1.78) (3.56) (3.56) (3.56) (3.56) (3.56) (4.45) (5.34)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
Pipe/Conduit Clamps & Hangers
Bolt Size ‘F’ And Hex Nut Included
143
(10.4) (10.9) (12.2) (13.1) (14.5) (32.2) (34.9) (38.1) (63.0) (75.3) (102.5) (150.6)
Pipe Hangers Fig. 4B SERIES ( Formerly B386 Series) SUSPENSION ROD PIPE STRAP
C A
• Safety Factor of 3 • Includes Hex Head Cap Screws and Hex Nuts • Standard finishes: ZN, GRN
B D
Design Load
Part No.
Pipe/Conduit Clamps & Hangers
4B-3/4 4B-1 4B-11/4 4B-11/2 4B-2 4B-21/2 4B-3 4B-31/2 4B-4 4B-5 4B-6 4B-8
Pipe Size Rod Size in. (mm) A 3/4"
(20)
3/8"-16
1" 11/4" 11/2" 2" 21/2" 3" 1 3 /2" 4" 5" 6" 8"
(25)
3/8"-16
(32)
3/8"-16
(40)
3/8"-16
(50)
3/8"-16
(65)
1/2"-13
(80)
1/2"-13
(90)
1/2"-13
(100)
5/8"-11
(125)
5/8"-11
(150)
3/4"-10
(200)
7/8"-9
B in.
1" 1" 1" 1" 11/2" 13/4" 17/8" 2" 2" 2" 21/8" 21/8"
C (mm)
in.
D (mm)
Bolt Size
(73.0)
25/8"
(66.7)
5/16"-18
(82.5)
215/16" 31/4" 37/16" 45/8" 53/8" 61/8" 63/4" 71/4" 85/16" 91/2" 111/2"
(74.6)
5/16"-18
(82.5)
5/16"-18
(mm)
in.
(25.4)
27/8"
(25.4)
31/4" 39/16" 313/16" 51/8" 55/8" 63/4" 71/4" 85/8" 97/8" 1015/16" 137/16"
(25.4) (25.4) (38.1) (44.4) (47.6) (50.8) (50.8) (50.8) (54.0) (54.0)
(90.6) (96.8) (130.2) (142.9) (171.4) (184.1) (219.1) (250.8) (277.8) (341.2)
Design Load
(87.3)
5/16"-18
(117.5)
5/16"-18
(136.5)
3/8"-16
(155.5)
3/8"-16
(171.4)
3/8"-16
(184.1)
2/2"-13
(211.1)
5/8"-11
(241.3)
5/8"-11
(292.1)
3/4"-10
B394 SERIES
Wt./C
Lbs.
(kN)
Lbs.
(kg)
330 330 330 330 440 440 660 660 800 980 980 1200
(1.47)
56 60 74 79 156 176 198 219 288 390 448 691
(3.6)
(1.47) (1.47) (1.47) (1.78) (1.78) (2.93) (2.93) (3.56) (4.36) (4.36) (5.34)
(3.6) (4.5) (5.0) (5.0) (5.4) (6.3) (7.2) (8.1) (8.1) (8.1) (8.1)
‘B’ Dia.
PIPE STRAP • Safety Factor of 3 • Includes: 1 Pair Pipe Clamps with Hex Head Cap Screws and Hex Nuts 1 Hanger Strap • Standard finishes: ZN
‘T’ Clamp Only
A
Pipe Size
‘W’ Clamp Only
Design Load
Design Load Part No. B394-3/4 B394-1 B394-11/4 B394-11/2 B394-2 B394-21/2 B394-3 B394-31/2 B394-4 B394-5 B394-6 B394-8
Pipe 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8”
Size (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200)
A 35/16” 33/4” 4” 45/16” 51/2” 63/8” 7” 79/16” 85/8” 93/4” 115/8” 137/8”
B
T
W
(84.1)
7/16”
(11.1)
1/8”
(3.2)
(95.2)
7/16”
(11.1)
1/8”
(3.2)
(101.6)
7/16”
(11.1)
1/8”
(3.2)
(109.5)
7/16”
(11.1)
1/8”
(3.2)
(139.7)
7/16”
(11.1)
1/4”
(6.3)
(161.9)
9/16”
(14.3)
1/4”
(6.3)
(177.8)
9/16”
(14.3)
1/4”
(6.3)
(192.1)
9/16”
(14.3)
1/4”
(6.3)
(219.1)
11/16”
(17.4)
1/4”
(6.3)
(247.6)
11/16”
(17.4)
1/4”
(6.3)
(295.3)
13/16”
(20.6)
3/8”
(9.5)
(352.4)
13/16”
(20.6)
3/8”
(9.5)
1” 1” 1” 1” 1” 1” 1” 1” 11/4” 11/4” 11/2” 11/2”
(25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (31.7) (31.7) (38.1) (38.1)
Wt./C
Lbs.
kN
Lbs.
kg
500 500 500 800 1040 1040 1040 1040 1040 1040 1615 1615
(2.22)
71 76 77 79 166 179 190 203 320 353 637 837
(32.2)
(2.22) (2.22) (3.56) (4.62) (4.62) (4.62) (4.62) (4.62) (4.62) (7.18) (7.18)
(34.5) (34.9) (35.8) (75.3) (81.2) (86.2) (92.1) (145.1) (160.1) (288.9) (379.6)
Reference page 126 for general fitting and standard finish specifications.
144
Strut Systems
Pipe Brackets B591 SERIES PIPE BRACKET SADDLE AND CLAMP • Safety Factor of 3 • Inside brace not required on B591-2 and B591-21/2 • Includes: 1 pc. Saddle bottom 1 pc. Saddle top (clamp) 2 pcs. Hex Head Cap Screws 2 pcs. Hex Nuts • Standard finish: ZN
113/16” (30.1) Pipe Size
1/4” (6.3)
B D W A Pipe/Conduit Clamps & Hangers
C
Design Load
Wt./C
Design Load Part No. B591-2 B591-21/2 B591-3 B591-31/2 B591-4 B591-5 B591-6 B591-8
Pipe Size 2” 21/2” 3” 31/2” 4” 5” 6” 8”
A
B
(50)
41/2” (114.3)
41/2” (114.3)
31/16”
(77.8)
(65)
5” 51/2” 6” 61/2” 71/2” 8” 9”
5” 53/4” 63/4” 63/4” 8” 83/4” 101/2”
39/16” 313/16” 49/16” 61/16” 61/16” 613/16” 89/16”
(90.5)
(80) (90) (100) (125) (150) (200)
(127.0) (139.7) (152.4) (165.1) (190.5) (203.2) (228.6)
C
73/16” (182.6) (127.0) 715/16” (201.6) (146.0) 83/4” (222.2) (171.4) (171.4) (203.2) (222.2) (266.7)
91/2” 101/4” 121/8” 133/16” 159/16”
(241.3) (260.3) (308.0) (335.0) (395.3)
D
W
Lbs.
kN
Lbs.
kg
15/8” (41.3) 15/8” (41.3)
1235 1180 1125 1070 1015 960 905 850
(5.53)
290 330 439 490 545 666 724 1087
(131.5)
(96.8) 15/8” (41.3) (115.9) 15/8” (41.3) (128.6) 15/8” (41.3) (154.0) 15/8” (41.3) (173.0) 15/8” (41.3) (217.5)
2”
(50.8)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
145
(5.29) (5.04) (4.79) (4.55) (4.30) (4.05) (3.81)
(149.7) (199.1) (222.2) (247.2) (302.1) (328.4) (493.0)
Pipe Block B356 PIPE BLOCK-2” (50) TO 8” (200) PIPE
Pipe/Conduit Clamps & Hangers
• Required hardware not included: 1 pc. 3/8”-16 x 1” Hex Head Cap Screw 1 pc. 3/8”-16 Channel Nut • Material: 1/4” (6.3) thick 15/8” (41.3) wide ASTM A1018 33,000 PSI min. yield • Standard finish: ZN • Wt./C 42 Lbs. (19.0 kg) Per Pair
Hole For 3/8”-16 HHCS
1” (25.4)
31/16” (77.8)
Reference page 126 for general fitting and standard finish specifications.
146
Strut Systems
Pipe Rollers B218
PIPE ROLLERS-1/2” (15) TO 8” (200) PIPE • Design Load 500 Lbs. (2.22 kN) • Safety Factor of 5 • When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) • Malleable Iron Rollers • Sold in pairs • Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts • Standard finish: ZN • Wt./C 256 Lbs. (116.1 kg) Per Pair
B
25/8” (66.7)
A
(60.3)
REFERENCE CHART - A DIMENSION Insulation Thickness in. (mm) Pipe Size 1/2”
(15)
3/4”
(20)
1”
(25)
11/4”
(32)
11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8”
(40) (50) (65) (80) (90) (100) (125) (150) (200)
0” (0.0) 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 71/4” 75/8” 81/2” 9” 10”
1” (25.4)
(184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (184.1) (193.7) (215.9) (228.6) (254.0)
– 71/4” 71/4” 71/4” 75/8” 75/8” 8” 81/2” 81/2” 9” 9” 10” 11”
– (184.1) (184.1) (184.1) (193.7) (193.7) (203.2) (215.9) (215.9) (228.6) (228.6) (254.0) (279.4)
11/2” (38.1) – 75/8” 75/8” 8” 8” 81/2” 81/2” 9” 9” 9” 10” 10” 11”
2” (50.8)
– (193.7) (193.7) (203.2) (203.2) (215.9) (215.9) (228.6) (228.6) (228.6) (254.0) (254.0) (279.4)
– 8” 81/4” 81/4” 81/2” 81/2” 9” 9” 10” 10” 10” 11” 11”
– (203.2) (209.5) (209.5) (215.9) (215.9) (228.6) (228.6) (254.0) (254.0) (254.0) (279.4) (279.4)
21/2” (63.5) – – – – 9” 9” 10” 10” 10” 10” 11” 11” 12”
– – – – (228.6) (228.6) (254.0) (254.0) (254.0) (254.0) (279.4) (279.4) (304.8)
3” (76.2) – – – – – – – 10” 10” 11” 11” 11” –
– – – – – – – (254.0) (254.0) (279.4) (279.4) (279.4)
–
4” (101.6) – – – – – – – – – – 12” 12” –
– – – – – – – – – – (304.8) (304.8)
–
REFERENCE CHART - B DIMENSION Insulation Thickness in. (mm) Pipe Size 1/2”
(15)
3/4”
(20)
1”
(25)
11/4”
(32)
11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8”
(40) (50) (65) (80) (90) (100) (125) (150) (200)
0” (0.0) 211/16” 213/16” 215/16” 31/8” 31/4” 39/16” 313/16” 41/8” 43/8” 45/8” 5” 1 5 /2” 615/16”
1” (25.4)
(68.3) (71.4) (74.6) (79.4) (82.5) (90.5) (96.8) (104.8) (111.1) (117.5) (127.0) (139.7) (160.3)
– 37/8” 43/16” 43/16” 43/8” 411/16” 47/8” 51/16” 55/16” 59/16” 61/16” 67/16” 73/8”
– (98.4) (106.4) (106.4) (111.1) (119.1) (123.8) (128.6) (134.9) (141.3) (154.0) (163.5) (187.3)
11/2” (38.1) – 43/8” 411/16” 45/8” 47/8” 51/16” 55/16” 59/16” 513/16” 61/16” 67/16” 615/16” 715/16”
2” (50.8)
– (111.1) (119.1) (117.5) (123.8) (128.6) (134.9) (141.3) (147.6) (154.0) (163.5) (176.2) (201.6)
– 47/8” 51/16” 51/8” 55/16” 55/8” 6” 61/8” 61/4” 67/16” 7” 3 7 /8” 87/16”
– (123.8) (128.6) (130.2) (134.9) (142.9) (152.4) (155.6) (158.7) (163.5) (177.8) (187.3) (214.3)
21/2” (63.5) – – – – 53/4” 61/16” 63/8” 67/16” 611/16” 615/16” 73/8” 715/16” 815/16”
– – – – (146.0) (154.0) (161.9) (163.5) (169.9) (176.2) (187.3) (201.6) (227.0)
3” (76.2) – – – – – – – 7” 71/4” 73/8” 77/8” 81/2” –
Reference page 126 for general fitting and standard finish specifications. Strut Systems
147
– – – – – – – (177.8) (184.1) (187.3) (200.0) (215.9)
–
4” (101.6) – – – – – – – – – – – – – – – – – – – – 813/16” (223.8) 91/2” (241.3) – –
Pipe/Conduit Clamps & Hangers
23/8”
Pipe Rollers B219
PIPE ROLLER SERIES - 3/4” (20) TO 12” (300) PIPE • • • •
Design Load 750 Lbs. (3.33 kN) Safety Factor of 5 Requires field assembly When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) • Malleable Iron Rollers • Sold in pairs • Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts • Reference sizing chart on page 135 • Standard finish: ZN
B
Pipe/Conduit Clamps & Hangers
25/8” (66.7) A
23/8” (60.3)
REFERENCE CHART - A DIMENSION Wt./C PR Part No. B219 B219-1 B219-2 B219-3 B219-4 B219-5
A 71/4” 8” 9” 10” 107/8” 115/8”
(184.1) (203.2) (228.6) (254.0) (276.2) (295.3)
Lbs.
kg
253 258 263 269 274 279
(114.7) (117.0) (119.3) (122.0) (124.8) (126.5)
REFERENCE CHART - B DIMENSION Insulation Thickness in. (mm) Pipe Size 1/2” 3/4”
1” 11/4” 11/2” 2” 21/2” 3” 1 3 /2” 4” 5” 6” 8” 10” 12”
0” (0.0)
211/16” (20) 213/16” (25) 215/16” (32) 31/8” (40) 31/4” (50) 39/16” (65) 33/4” (80) 41/8” (90) 41/4” (100) 49/16” (125) 51/16” (150) 57/16” (200) 63/8” (250) 75/16” (300) 81/4” (15)
1” (25.4)
(68.3) (71.4) (74.6) (79.4) (82.5) (90.5) (95.2) (104.8) (107.9) (115.9) (128.6) (138.1) (161.9) (185.7) (209.5)
– 37/8” 43/16” 43/16” 47/16” 45/8” 47/8” 51/8” 51/4” 51/2” 61/16” 67/16” 77/16” 83/16” –
– (98.4) (106.4) (106.4) (112.7) (117.5) (123.8) (130.2) (133.3) (139.7) (154.0) (163.5) (188.9) (208.0)
–
11/2” (38.1) – 41/2” 45/8” 45/8” 47/8” 53/16” 51/4” 59/16” 513/16” 61/16” 67/16” 615/16” 715/16” – –
2” (50.8)
– (114.3) (117.5) (117.5) (123.8) (131.8) (133.3) (141.3) (147.6) (154.0) (163.5) (176.2) (201.6)
– –
– 47/8” 51/16” 51/8” 51/4” 51/2” 6” 61/16” 61/4” 67/16” 7” 73/8” 83/8” – –
– (123.8) (128.6) (130.2) (133.3) (139.7) (152.4) (154.0) (158.7) (163.5) (177.8) (187.3) (212.7)
– –
21/2” (63.5) – – – – 53/4” 61/16” 63/8” 67/16” 611/16” 615/16” 73/8” 77/8” 9” – –
– – – – (146.0) (154.0) (161.9) (163.5) (169.9) (176.2) (187.3) (200.0) (228.6)
– –
3” (76.2) – – – – – – – 615/16” 71/16” 73/8” 77/8” 815/16” – – –
– – – – – – – (176.2) (179.4) (187.3) (200.0) (211.1)
– – –
4” (101.6) – – – – – – – – – – – – – – – – – – – – 815/16” (227.0) 99/16” (242.9) – – – – – –
Reference B219 sizing chart on page 149
Reference page 126 for general fitting and standard finish specifications.
148
Strut Systems
Pipe Rollers B219 SIZING CHART 0” (0.0)
1” (25.4)
1/2”
B219 B219 B219 B219 B219 B219 B219 B219 B219-1 B219-1 B219-1 B219-2 B219-3 B219-4 B219-5
– B219 B219 B219 B219 B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-3 B219-4 B219-5 –
3/4”
1” 11/4” 11/2” 2” 1 2 /2” 3” 31/2” 4” 5” 6” 8” 10” 12”
(15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300)
Insulation Thickness in. (mm) 11/2” (38.1) 2” (50.8) 21/2” (63.5) – B219 B219-1 B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-2 B219-3 B219-3 B219-4 – –
– B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-2 B219-3 B219-3 B219-3 B219-4 B219-5 – –
– – – – B219-2 B219-2 B219-3 B219-3 B219-3 B219-3 B219-4 B219-4 B219-5 – –
3” (76.2) – – – – – – – B219-3 B219-4 B219-4 B219-4 B219-5 – – –
Reference page 126 for general fitting and standard finish specifications. Strut Systems
149
4” (101.6) – – – – – – – – – – B219-5 B219-5 – – –
Pipe/Conduit Clamps & Hangers
Pipe Size
Pipe Rollers B379 PIPE ROLLERS-6” (150) TO 18” (450) PIPE Design Load 1500 Lbs. (6.67 kN) Safety Factor of 5 Requires field assembly When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) • Malleable Iron Rollers • Sold in pairs • Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts • Standard finish: ZN • Wt./C 889 Lbs. (403.2 kg)
Pipe/Conduit Clamps & Hangers
• • • •
B
4” (101.6)
A
REFERENCE CHART - A DIMENSION Insulation Thickness in. (mm) Pipe Size 6” 8” 10” 12” 14” 16” 18”
(150) (200) (250) (300) (350) (400) (450)
0” (0.0) 99/16” 101/4” 11” 1111/16” 121/16” 123/4” 131/2”
1” (25.4)
(242.9) (260.3) (279.4) (296.9) (306.4) (323.8) (342.9)
103/16” 111/16” 113/4” 129/16” 127/8” 131/2” 141/4”
11/2” (38.1)
2” (50.8)
(258.8) 105/8” (269.9)
11” 113/4” 121/2” 131/4” 139/16” 1413/16” 15”
(281.0) 113/8” (288.9) (298.4) 121/8” (308.0) (319.1) 127/8” (327.0) (327.0) 133/16” (335.0) (342.9) 137/8” (352.4) (361.9) 145/8” (371.5)
(279.4)
21/2” (63.5) 113/8” (288.9)
(298.4) 123/16” (309.6) (317.5) 1213/16” (325.4) (336.5) 139/16” (344.5)
137/8” (352.4) (360.4) 141/2” (368.3) (381.0) 155/16” (388.9) (344.5)
3” (76.2) 113/4” 121/2” 131/8” 137/8” 141/4” 147/8” 155/8”
(298.4) (317.5) (333.4) (352.4) (361.9) (377.8) (396.9)
4” (101.6) 121/2” 131/4” 137/8” 145/8” 147/8” 151/2” 165/16”
(317.5) (336.5) (352.4) (371.5) (377.8) (393.7) (414.3)
REFERENCE CHART - B DIMENSION Pipe Size 6” 8” 10” 12” 14” 16” 18”
(150) (200) (250) (300) (350) (400) (450)
0” (0.0) 67/8” 713/16” 813/16” 93/4” 105/16” 115/16” 121/4”
1” (25.4)
(174.6) (198.4) (223.8) (247.6) (261.9) (287.3) (311.1)
77/8” 87/8” 97/8” 1015/16” 113/8” 125/16” 131/4”
Insulation Thickness in. (mm) 1 1 /2” (38.1) 2” (50.8) 21/2” (63.5)
83/8” (225.4) 93/8” (250.8) 107/16” (277.8) 113/8” (288.9) 117/8” (312.7) 1213/16” (336.5) 133/4” (200.0)
(212.7) (238.1) (265.1) (288.9) (301.6) (325.4) (349.2)
87/8” 97/8” 1015/16” 117/8” 125/16” 131/4” 143/16”
(225.4) (250.8) (277.8) (301.6) (312.7) (336.5) (360.4)
93/8” 107/16” 113/8” 125/16” 1213/16” 133/4” 1411/16”
(238.1) (265.1) (228.9) (312.7) (325.4) (349.2) (373.1)
3” (76.2) 97/8” 1015/16” 117/8” 1213/16” 131/4” 141/4” 151/8”
4” (101.6)
(250.8) 1015/16” (277.8) (277.8) (301.6) (325.4) (336.5) (361.9) (384.2)
117/8” (301.6) 1213/16” (325.4) 133/4” (349.2) 141/4” (361.9) 151/8” (384.2) 161/16” (408.0)
Reference page 126 for general fitting and standard finish specifications.
150
Strut Systems
Pipe Rollers B479 PIPE ROLLERS-16” (400) TO 30” (750) PIPE • • • •
Design Load 2000 Lbs. (8.89 kN) Safety Factor of 5 Requires field assembly When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) • Malleable Iron Rollers • Sold in pieces • Required hardware not included: 4 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 4 pcs. 1/2”-13 Channel Nuts • Standard finish: ZN • Wt./C 889 Lbs. (403.2 kg)
Pipe/Conduit Clamps & Hangers
B
4” (101.6)
A 213/16” (71.4)
REFERENCE CHART - A DIMENSION Pipe Size 16” 18” 20” 24” 30”
(400) (450) (500) (600) (750)
0” (0.0) 153/16” 151/2” 16” 1613/16” 1713/16”
1” (25.4)
(385.8) (393.7) (406.4) (427.0) (452.4)
155/8” 16” 163/8” 175/16” 181/4”
(396.9) (406.4) (415.9) (439.7) (463.5)
Insulation Thickness in. (mm) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 157/8” 163/16” 169/16” 171/2” 183/8”
(403.2) (411.2) (420.7) (444.5) (466.7)
16” 163/8” 167/8” 171/2” 189/16”
(406.4) (415.9) (428.6) (444.5) (471.5)
161/4” 169/16” 1615/16” 1711/16” 187/8”
(412.7) (420.7) (430.2) (449.3) (476.2)
3” (76.2) 161/2” 163/4” 173/16” 177/8” 187/8”
(419.1)
4” (101.6) 17”
(431.8)
(425.4) 173/16” (436.6) (436.6) 171/2” (444.5) (454.0) 181/8” (460.4) (479.4) 191/4” (488.9)
REFERENCE CHART - B DIMENSION Insulation Thickness in. (mm) Pipe Size 16” 18” 20” 24” 30”
0” (0.0)
1013/16” 117/8” (500) 123/16” (600) 1413/16” (750) 1713/16”
1” (25.4)
(400)
(274.6) 1115/16” (303.2)
(450)
(301.6) 1215/16” (328.6) (325.4) 1315/16” (354.0) (376.2)
157/8”
(452.4)
187/8” (479.4)
(403.2)
11/2” (38.1) 123/8” 137/16” 147/16” 163/8” 193/8”
2” (50.8)
(314.3) 1215/16” (328.6) (341.3) 1315/16” (354.0) (366.7) 147/8”
(377.8)
167/8”
(428.6)
(492.1) 197/8”
(504.8)
(415.9)
21/2” (63.5) 133/8” 147/16” 157/16” 173/8” 203/8”
3” (76.2)
(339.7) 1315/16” (354.0) 1415/16” (379.4) (366.7) 1415/16” (379.4) 1515/16” (404.8)
157/8” (403.2) 1615/16” (430.2) (441.3) 177/8” (454.0) 187/8” (479.4) (517.5) 205/16” (531.8) 2115/16” (557.2) (392.1)
Reference page 126 for general fitting and standard finish specifications. Strut Systems
151
4” (101.6)
