Black and Decker BL3000S Blender Blades Replacement
Black and Decker BL3000S Blender Blades Replacement
Black and Decker BL3000S Blender Blades Replacement This guide will help you check your blender blades to ensure that they are operating properly.
Written By: Andrew
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Black and Decker BL3000S Blender Blades Replacement
INTRODUCTION This installation guide will help you separate the blades from the blender jar. Once separated, you can successfully install replacements blades or to check for any malfunctions with the blades.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Black and Decker BL3000S Blender Blades Replacement
Step 1 — Blender Blades
Make sure the blender is turned off and unplugged from all power.
Remove the glass jar from the base of the blender.
Remove the top lid from the blender jar.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Black and Decker BL3000S Blender Blades Replacement
Step 3
Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.
Take care not to cut yourself on the blades.
Step 4
Lift the rubber washer straight up to remove it from the blade assembly.
Take care not to cut yourself on the blades.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Black and Decker BL3000S Blender Blades Replacement
Step 5
Lift the blades from the bottom cap.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 09:04:24 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Black and Decker BL3000S Blender Blades Replacement This guide will help you check your blender blades to ensure that they are operating properly.
Written By: Andrew
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Black and Decker BL3000S Blender Blades Replacement
INTRODUCTION This installation guide will help you separate the blades from the blender jar. Once separated, you can successfully install replacements blades or to check for any malfunctions with the blades.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Black and Decker BL3000S Blender Blades Replacement
Step 1 — Blender Blades
Make sure the blender is turned off and unplugged from all power.
Remove the glass jar from the base of the blender.
Remove the top lid from the blender jar.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Black and Decker BL3000S Blender Blades Replacement
Step 3
Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.
Take care not to cut yourself on the blades.
Step 4
Lift the rubber washer straight up to remove it from the blade assembly.
Take care not to cut yourself on the blades.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
Black and Decker BL3000S Blender Blades Replacement
Step 5
Lift the blades from the bottom cap.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-18 09:04:24 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
