Blu Studio HD 6.0 SIM Card Replacement
Blu Studio HD 6.0 SIM Card Replacement
Blu Studio HD 6.0 SIM Card Replacement This guide is for installing a SIM card for the Blue Studio 6.0 HD.
Written By: Alec
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Blu Studio HD 6.0 SIM Card Replacement
INTRODUCTION You don't always have to go to your carrier to install your SIM card. Installing a SIM card is a relatively easy process. Follow this guide on how to change or install a SIM card for the BLU Studio 6.0 HD.
TOOLS:
PARTS:
iFixit Opening Tools (1)
New SIM Card (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Blu Studio HD 6.0 SIM Card Replacement
Step 1 — Rear Case
Begin by making sure your Blu Studio is turned off.
Step 2 — Back Panel.
To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Blu Studio HD 6.0 SIM Card Replacement
Step 3
Next, gently slide your thumb (or plastic tool if you prefer) down the seem running the length of your Blu Studio until the rear panel is completely removed.
Your rear panel should be placed nearby and in a safe location until you are finished with your task.
Step 4 — Find out if your Blu Studio 6.0 is "unlocked."
Look at the sticker on top of the battery housing and note the model, part number and type.
Research this information to find out if you have an unlocked version of the phone.
If your phone is unlocked you can use any mobile network SIM card. If not you must replace the SIM card with a card from your carrier.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Blu Studio HD 6.0 SIM Card Replacement
Step 5 — Installing the SIM Card
If necessary slide the unneeded SIM card out of it's slot.
Make sure your new SIM card has been activated by the carrier.
Take the front end tip of the SIM card (the side with the corner cut) and slide it gently into the SIM card slot.
Step 6 — Turn the phone on
Turn on your Studio 6.0 and test it to make sure that everything is working.
If your phone gives you an error, check your SIM card installation. If everything seems to be correct make sure your SIM card is activated.
If everything is working you're good to go.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 02:04:10 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Blu Studio HD 6.0 SIM Card Replacement
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
Blu Studio HD 6.0 SIM Card Replacement This guide is for installing a SIM card for the Blue Studio 6.0 HD.
Written By: Alec
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Blu Studio HD 6.0 SIM Card Replacement
INTRODUCTION You don't always have to go to your carrier to install your SIM card. Installing a SIM card is a relatively easy process. Follow this guide on how to change or install a SIM card for the BLU Studio 6.0 HD.
TOOLS:
PARTS:
iFixit Opening Tools (1)
New SIM Card (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Blu Studio HD 6.0 SIM Card Replacement
Step 1 — Rear Case
Begin by making sure your Blu Studio is turned off.
Step 2 — Back Panel.
To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Blu Studio HD 6.0 SIM Card Replacement
Step 3
Next, gently slide your thumb (or plastic tool if you prefer) down the seem running the length of your Blu Studio until the rear panel is completely removed.
Your rear panel should be placed nearby and in a safe location until you are finished with your task.
Step 4 — Find out if your Blu Studio 6.0 is "unlocked."
Look at the sticker on top of the battery housing and note the model, part number and type.
Research this information to find out if you have an unlocked version of the phone.
If your phone is unlocked you can use any mobile network SIM card. If not you must replace the SIM card with a card from your carrier.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Blu Studio HD 6.0 SIM Card Replacement
Step 5 — Installing the SIM Card
If necessary slide the unneeded SIM card out of it's slot.
Make sure your new SIM card has been activated by the carrier.
Take the front end tip of the SIM card (the side with the corner cut) and slide it gently into the SIM card slot.
Step 6 — Turn the phone on
Turn on your Studio 6.0 and test it to make sure that everything is working.
If your phone gives you an error, check your SIM card installation. If everything seems to be correct make sure your SIM card is activated.
If everything is working you're good to go.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 02:04:10 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Blu Studio HD 6.0 SIM Card Replacement
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
