Bose SoundDock Portable v2 Speaker Replacement
Bose SoundDock Portable v2 Speaker Replacement
Bose SoundDock Portable v2 Speaker Replacement If the speakers are not working follow these instructions for clean crisp sound. You will have to already have the speaker purchased to do this replacement.
Written By: Evan Low
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Bose SoundDock Portable v2 Speaker Replacement
TOOLS: Phillips #2 Screwdriver (1) Metal Spudger (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Bose SoundDock Portable v2 Speaker Replacement
Step 1 — Speaker
Gently pry the front mesh cover off of the SoundDock using a metal spudger.
The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart
Step 2
Remove the four 16mm #2 screws holding the speaker to the base using a #2 screwdriver
Gently lift the speaker from the base.
Do not lift the speaker to far out of the base, you may damage the wires.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Bose SoundDock Portable v2 Speaker Replacement
Step 3
Carefully slide the wires off of the pins on the speaker.
Do not unwrap the wire of the pin, the wire will break and you won't be able to attach it to the new speaker.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 07:11:44 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Bose SoundDock Portable v2 Speaker Replacement If the speakers are not working follow these instructions for clean crisp sound. You will have to already have the speaker purchased to do this replacement.
Written By: Evan Low
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Bose SoundDock Portable v2 Speaker Replacement
TOOLS: Phillips #2 Screwdriver (1) Metal Spudger (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Bose SoundDock Portable v2 Speaker Replacement
Step 1 — Speaker
Gently pry the front mesh cover off of the SoundDock using a metal spudger.
The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart
Step 2
Remove the four 16mm #2 screws holding the speaker to the base using a #2 screwdriver
Gently lift the speaker from the base.
Do not lift the speaker to far out of the base, you may damage the wires.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Bose SoundDock Portable v2 Speaker Replacement
Step 3
Carefully slide the wires off of the pins on the speaker.
Do not unwrap the wire of the pin, the wire will break and you won't be able to attach it to the new speaker.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 07:11:44 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
