Braven BRV-1s Rear Water Cap Replacement

Braven BRV-1s Rear Water Cap Replacement

Braven BRV-1s Rear Water Cap Replacement This guide will allow you to replace the Rear Water Cap of the Braven BRV-1S if it is broken, dented, or damaged.

Written By: Carmelo DeLeon

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Braven BRV-1s Rear Water Cap Replacement

INTRODUCTION Learn how to properly remove your waterproof cap on your Braven BRV-1s in order to replace it.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Braven BRV-1s Rear Water Cap Replacement

Step 1 — Rear Water Cap

 Please be aware that unless the replacement cap is an original manufacturer part, then the device may no longer be waterproof

Step 2 

© iFixit — CC BY-NC-SA

www.iFixit.com

Unscrew the Rear Water cap in a counterclockwise rotation with your fingers

Page 3 of 4

Braven BRV-1s Rear Water Cap Replacement

Step 3

 when screwing in the replacement rear water cap, ensure it is properly aligned to ensure the device remains waterproof

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-20 03:29:50 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4