brickfix resin resin
Resin to Resin Remedial Wall Tie A high performance resin bonded remedial wall tie.
Benefits: § Provides a quick, simple, stress-free fixing § Helical design provides multiple drip points and rotational flexibility that accommodates normal building movement. § The 4.5mm and 6.0mm diameter sections allow greater flexibility for thermal movement § Can be pull tested § Widely accepted to provide a good fixing to most substrates Applications: For tying and pinning masonry Sizes Available: 4.5mm diameter 4.5mm x 195mm 4.5mm x 220mm 4.5mm x 245mm
6mm diameter 6mm x 200mm 6mm x 220mm 6mm x 250mm 6mm x 270mm
All products should be used in accordance with the manufacturer’s instructions. Whilst any information and/or specification contained herein, is to the best of our knowledge, true and accurate, no warranty is given, or implied in connection with any recommendations, or suggestions made by us, or our representatives, agents or distributors as every possible variation in the method of its use or conditions under which it is applied cannot be anticipated.
Recommended tooling: Suitable drilling equipment, resin gun, hand support tool and BrickFix polyester resin cartridge with extension nozzle. Application:
1. Drill a 10mm pilot hole through the outer leaf and 55mm into the inner leaf. Clear both holes of debris using blowing and brushing.
2. Inject polyester resin into the inner leaf using the nozzle extension.
4. Inject resin over the tie into the outer leaf.
5. Make good the surface with BrickFix Colour-Pointing Mortar.
3. Push through the outer leaf and into the inner leaf. Hand support tool available if required.
Always wear the appropriate safety and protective clothing when installing fixing and anchor products. Always observe the necessary Health & Safety guidelines. The information given in this datasheet is guidance only and should always be verified by a suitable engineer.
Safeguard Europe Ltd., Redkiln Close, Redkiln Way, Horsham, West Sussex, RH13 5QL. Tel: 01403 210204 Web: www.safeguardeurope.com All products should be used in accordance with the manufacturer’s instructions. Whilst any information and/or specification contained herein, is to the best of our knowledge, true and accurate, no warranty is given, or implied in connection with any recommendations, or suggestions made by us, or our representatives, agents or distributors as every possible variation in the method of its use or conditions under which it is applied cannot be anticipated.
Benefits: § Provides a quick, simple, stress-free fixing § Helical design provides multiple drip points and rotational flexibility that accommodates normal building movement. § The 4.5mm and 6.0mm diameter sections allow greater flexibility for thermal movement § Can be pull tested § Widely accepted to provide a good fixing to most substrates Applications: For tying and pinning masonry Sizes Available: 4.5mm diameter 4.5mm x 195mm 4.5mm x 220mm 4.5mm x 245mm
6mm diameter 6mm x 200mm 6mm x 220mm 6mm x 250mm 6mm x 270mm
All products should be used in accordance with the manufacturer’s instructions. Whilst any information and/or specification contained herein, is to the best of our knowledge, true and accurate, no warranty is given, or implied in connection with any recommendations, or suggestions made by us, or our representatives, agents or distributors as every possible variation in the method of its use or conditions under which it is applied cannot be anticipated.
Recommended tooling: Suitable drilling equipment, resin gun, hand support tool and BrickFix polyester resin cartridge with extension nozzle. Application:
1. Drill a 10mm pilot hole through the outer leaf and 55mm into the inner leaf. Clear both holes of debris using blowing and brushing.
2. Inject polyester resin into the inner leaf using the nozzle extension.
4. Inject resin over the tie into the outer leaf.
5. Make good the surface with BrickFix Colour-Pointing Mortar.
3. Push through the outer leaf and into the inner leaf. Hand support tool available if required.
Always wear the appropriate safety and protective clothing when installing fixing and anchor products. Always observe the necessary Health & Safety guidelines. The information given in this datasheet is guidance only and should always be verified by a suitable engineer.
Safeguard Europe Ltd., Redkiln Close, Redkiln Way, Horsham, West Sussex, RH13 5QL. Tel: 01403 210204 Web: www.safeguardeurope.com All products should be used in accordance with the manufacturer’s instructions. Whilst any information and/or specification contained herein, is to the best of our knowledge, true and accurate, no warranty is given, or implied in connection with any recommendations, or suggestions made by us, or our representatives, agents or distributors as every possible variation in the method of its use or conditions under which it is applied cannot be anticipated.
