Brochure Hardware MAT MAT5.web safe
MARINE ASSET TRACKER
MAT5 Hardware Specification The MAT5 satellite transceiver is ideally suited for the Oil & Gas sector. It has been specifically designed for Rig/Platform Monitoring Management where existing power supply onboard can be connected to the unit to provide a constant power source to the Internal Battery Management system.
2A fuse
Battery pack
5A fuse
24S GND
IsatM2M transceiver
Charger board
Fuse F5 (5A)
Cable glands
24V, 2A DC power supply
POS+ NEG -
MAT5
232mm
Battery pack
190mm
10 Amp Q/blow fuse (20mm x 5mm)
MAT5 External Battery Pack
The unit requires a stable external DC supply to maintain the battery charge. On disconnection of external power, the unit will operate for approximately 14 days. Operation of the unit is completely automatic, and the only user intervention that should be required after installation is to restore the external power supply in the event of disconnection. On its default setting, the unit will transmit a position report every 24 hours. However, the variable position reporting function enables the shore-based operator to increase reporting frequency to up to 15 minutes, as required.
415mm
Key Benefits • Robust enclosure manufactured from durable composite materials • Up to 14 days position reporting on reserve power • Provides accurate audit trail to mineral management authorities • Reliable position reporting during extreme weather conditions
MAT5 TECHNICAL SPECIFICATION PHYSICAL Overall dimensions
Length: 415 mm x Width: 232 mm x Height: 190 mm per enclosure
Weight
18kg
External battery pack weight
17kg
Hardware
Composite polystyrene and stainless steel enclosure, SkyWave DMR-800D transceiver, charger board and battery. External battery pack; composite polystyrene and stainless steel enclosure, battery pack.
ENVIRONMENTAL Operating temperature range
-40° to +70° C
Storage temperature range
-40° to +85° C
Humidity
95% Relative Humidity at 30° C
Vibration
5-20 Hz: 1.92 m2/s3 random noise 20-500Hz: -3dB octave random noise
Shock (survival)
Half sine 6ms, 300m/s2
Transceiver environmental rating
IP67/NEMA-4X
Enclosure environmental rating
IP68
ELECTRICAL Power consumption (typ. @ 12Vdc)
Tracking mode (GPS on): 0.9W; Transmit: 7.6W
Battery pack
21 Ah sealed leadacid
Coverage
Global, five overlapping regions
Frequency range
Rx: 1525.0 to 1559.0 MHz Tx: 1626.5 to 1660.5 MHz
EIRP
9 dBW max
Elevation angle
0 to +90 degrees
Copyright © Pole Star, all rights reserved. MAT-MAT5-HardwareSpecs Valid as of 08.02.2012
SATELLITE
GPS Frequency
1575.42 MHz
Channels
16 parallel
Acquisition
Cold-start: 34s
CERTIFICATIONS / Compliance Satellite
Inmarsat D+/IsatM2M Type Approved
Regulatory
FCC; RoHS; CE Mark (R&TTE); Anatel: IEC/EN 60945
London +44 20 7313 7400
Hong Kong +852 2520 0951
Boston +1 617 800 9367
Panama
+507 301 5748
Singapore
+65 6818 6234
Sydney
+61 2 4221 5284
[email protected]
MAT5 Hardware Specification The MAT5 satellite transceiver is ideally suited for the Oil & Gas sector. It has been specifically designed for Rig/Platform Monitoring Management where existing power supply onboard can be connected to the unit to provide a constant power source to the Internal Battery Management system.
2A fuse
Battery pack
5A fuse
24S GND
IsatM2M transceiver
Charger board
Fuse F5 (5A)
Cable glands
24V, 2A DC power supply
POS+ NEG -
MAT5
232mm
Battery pack
190mm
10 Amp Q/blow fuse (20mm x 5mm)
MAT5 External Battery Pack
The unit requires a stable external DC supply to maintain the battery charge. On disconnection of external power, the unit will operate for approximately 14 days. Operation of the unit is completely automatic, and the only user intervention that should be required after installation is to restore the external power supply in the event of disconnection. On its default setting, the unit will transmit a position report every 24 hours. However, the variable position reporting function enables the shore-based operator to increase reporting frequency to up to 15 minutes, as required.
415mm
Key Benefits • Robust enclosure manufactured from durable composite materials • Up to 14 days position reporting on reserve power • Provides accurate audit trail to mineral management authorities • Reliable position reporting during extreme weather conditions
MAT5 TECHNICAL SPECIFICATION PHYSICAL Overall dimensions
Length: 415 mm x Width: 232 mm x Height: 190 mm per enclosure
Weight
18kg
External battery pack weight
17kg
Hardware
Composite polystyrene and stainless steel enclosure, SkyWave DMR-800D transceiver, charger board and battery. External battery pack; composite polystyrene and stainless steel enclosure, battery pack.
ENVIRONMENTAL Operating temperature range
-40° to +70° C
Storage temperature range
-40° to +85° C
Humidity
95% Relative Humidity at 30° C
Vibration
5-20 Hz: 1.92 m2/s3 random noise 20-500Hz: -3dB octave random noise
Shock (survival)
Half sine 6ms, 300m/s2
Transceiver environmental rating
IP67/NEMA-4X
Enclosure environmental rating
IP68
ELECTRICAL Power consumption (typ. @ 12Vdc)
Tracking mode (GPS on): 0.9W; Transmit: 7.6W
Battery pack
21 Ah sealed leadacid
Coverage
Global, five overlapping regions
Frequency range
Rx: 1525.0 to 1559.0 MHz Tx: 1626.5 to 1660.5 MHz
EIRP
9 dBW max
Elevation angle
0 to +90 degrees
Copyright © Pole Star, all rights reserved. MAT-MAT5-HardwareSpecs Valid as of 08.02.2012
SATELLITE
GPS Frequency
1575.42 MHz
Channels
16 parallel
Acquisition
Cold-start: 34s
CERTIFICATIONS / Compliance Satellite
Inmarsat D+/IsatM2M Type Approved
Regulatory
FCC; RoHS; CE Mark (R&TTE); Anatel: IEC/EN 60945
London +44 20 7313 7400
Hong Kong +852 2520 0951
Boston +1 617 800 9367
Panama
+507 301 5748
Singapore
+65 6818 6234
Sydney
+61 2 4221 5284
[email protected]
