Bronze Marine Pumps
Bronze Marine Pumps • Bronze Construction • Buna-N Mechanical Seal and O-Ring • Maximum Working Pressure 50 PSI • Maximum Temperature 180° F
BRONZE MARINE PUMPS
CALL TOLL FREE 877-742-2878 FOR SALES AND SUPPORT Return to BurtProcess.com
• Maximum Flow 17 GPM • Maximum Head 12 Ft. Model 3670-94 3/4˝ x 1/2˝
• Self-Cleaning, Semi-Open Impeller • Totally Enclosed Motors • 12 Volt DC or 115 VAC Motor, Depending on Model
Performance of Bronze Marine Pumps [m]
[ft.*] 14 A = 3670-94 3/4" (115 VAC) 1750 RPM 1/8 HP [0.09 kW] B = 4860-97 3/4" (12 VDC) 3700 RPM 1/8 HP [0.09 kW]
4
Model 4860-97 3/4˝ x 3/4˝
B 3
Total Head
The AMT Model 3670-94 Naval Bronze Straight Centrifugal pump is designed for low pressure salt water wash down and recirculating applications. The pump has been sized for salt water (1.03 specific gravity) and feature provisions for the installation of a seal wash, front drain plug and pullfrom-rear design. The unit is driven by a 1/8 HP capacitor start induction motor (TEFC) with ball bearings and a stainless steel shaft. On/off switch and line cord are standard.
12
10
8
2 6
A 4
1 2
0
0 0
2
0
The AMT Model 4860-97 Bronze Centrifugal pump is compact and designed for use in general dewatering, salt water applications in live well tanks, circulation and chemical transfer. This pump is fitted with a 1/8 HP, 12 Volt DC, 3700 RPM motor. Pumps are not self-priming and require flooded suction.
®
4
6
1
8
10
2
12
14
16
3
18 [U.S2.0gpm]
4
[m3/h]
Capacity ( * ) C o n v er t t o p s i , di vi d e b y 2 . 3 1
L iq ui d - Wat e r s p ec i f i c g r a v i t y 1 .0
400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867) A Gorman-Rupp Company
For use with nonflammable liquids compatible with pump component materials.
Viton® and Teflon® are registered trademarks of E. I. Dupont.
STE-1
®
Bronze Marine Pumps
A Gorman-Rupp Company
Pump Dimensional & Specification Data
Model 3670-94
Model 4860-97
Model
Curve
HP
PH
RPM
ENC
Voltage @ 60 Hz
Full Load Amps
SUC*
DIS*
L**
W
H
Ship Wt. (Lbs.)
4860-97
B
1/8
-
3700
TENV
12.8V DC
9
¾
¾
7.6 [19.3]
3.3 [8.3]
4.0 [10.1]
7
3670-94
A
1/8
1
1750
TEFC
115
11
¾
½
10.1 [25.5]
8.0 [20.3]
5.6 [14.2]
20
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s specifications. NOTE: Dimensions are in inches [centimeters] and have a tolerance of ±1/4". NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ± 10% = 207 to 253).
Maximum Solids Handling Capacity: 3670-94 – 1/8” Diameter 4860-97 – 3/16” Diameter
Standard Features • Bronze Construction
• Maximum Head 12 Ft.
• Buna-N Mechanical Seal and O-ring
• Self-cleaning, Semi-open Impeller
• Maximum Working Pressure 50 PSI
• Totally Enclosed Motors
• Maximum Temperature 180° F
• 12 Volt DC or 115 VAC Motors
• Maximum Flow 17 GPM
• QSP – Quick Ship Pumps
®
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867) A Gorman-Rupp Company
STE-2
The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
0613
BRONZE MARINE PUMPS
CALL TOLL FREE 877-742-2878 FOR SALES AND SUPPORT Return to BurtProcess.com
• Maximum Flow 17 GPM • Maximum Head 12 Ft. Model 3670-94 3/4˝ x 1/2˝
• Self-Cleaning, Semi-Open Impeller • Totally Enclosed Motors • 12 Volt DC or 115 VAC Motor, Depending on Model
Performance of Bronze Marine Pumps [m]
[ft.*] 14 A = 3670-94 3/4" (115 VAC) 1750 RPM 1/8 HP [0.09 kW] B = 4860-97 3/4" (12 VDC) 3700 RPM 1/8 HP [0.09 kW]
4
Model 4860-97 3/4˝ x 3/4˝
B 3
Total Head
The AMT Model 3670-94 Naval Bronze Straight Centrifugal pump is designed for low pressure salt water wash down and recirculating applications. The pump has been sized for salt water (1.03 specific gravity) and feature provisions for the installation of a seal wash, front drain plug and pullfrom-rear design. The unit is driven by a 1/8 HP capacitor start induction motor (TEFC) with ball bearings and a stainless steel shaft. On/off switch and line cord are standard.
12
10
8
2 6
A 4
1 2
0
0 0
2
0
The AMT Model 4860-97 Bronze Centrifugal pump is compact and designed for use in general dewatering, salt water applications in live well tanks, circulation and chemical transfer. This pump is fitted with a 1/8 HP, 12 Volt DC, 3700 RPM motor. Pumps are not self-priming and require flooded suction.
®
4
6
1
8
10
2
12
14
16
3
18 [U.S2.0gpm]
4
[m3/h]
Capacity ( * ) C o n v er t t o p s i , di vi d e b y 2 . 3 1
L iq ui d - Wat e r s p ec i f i c g r a v i t y 1 .0
400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867) A Gorman-Rupp Company
For use with nonflammable liquids compatible with pump component materials.
Viton® and Teflon® are registered trademarks of E. I. Dupont.
STE-1
®
Bronze Marine Pumps
A Gorman-Rupp Company
Pump Dimensional & Specification Data
Model 3670-94
Model 4860-97
Model
Curve
HP
PH
RPM
ENC
Voltage @ 60 Hz
Full Load Amps
SUC*
DIS*
L**
W
H
Ship Wt. (Lbs.)
4860-97
B
1/8
-
3700
TENV
12.8V DC
9
¾
¾
7.6 [19.3]
3.3 [8.3]
4.0 [10.1]
7
3670-94
A
1/8
1
1750
TEFC
115
11
¾
½
10.1 [25.5]
8.0 [20.3]
5.6 [14.2]
20
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s specifications. NOTE: Dimensions are in inches [centimeters] and have a tolerance of ±1/4". NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ± 10% = 207 to 253).
Maximum Solids Handling Capacity: 3670-94 – 1/8” Diameter 4860-97 – 3/16” Diameter
Standard Features • Bronze Construction
• Maximum Head 12 Ft.
• Buna-N Mechanical Seal and O-ring
• Self-cleaning, Semi-open Impeller
• Maximum Working Pressure 50 PSI
• Totally Enclosed Motors
• Maximum Temperature 180° F
• 12 Volt DC or 115 VAC Motors
• Maximum Flow 17 GPM
• QSP – Quick Ship Pumps
®
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867) A Gorman-Rupp Company
STE-2
The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
0613
