C737 - Electric Supplies Online
Reset Form
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job: Fixture Catalog number:
Approvals:
Fixture Options: Ordered Separately from Fixture See pages 2-3
Mounting Options: / Fixture
Mode
Finish
Date: Page: 1 of 6
Ordered Separately from Fixture See pages 4-6
Specifications Housing: Die-cast brass body, lamp housing and socket enclosure. Swivel: Die-cast brass with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Lens Frame: Integral die-cast brass lens ring and glare shield. Gasketing: Silicone gaskets used throughout. Optical System: 6 LED emitters configured in a circular array, mounted on yoke. Available in “Cool White” (approx 5000+K) Driver: Electronic driver. Rated for 6 watts. Available in 120V input. -40°F. starting temperature. All drivers are Underwriters Laboratories recognized. Finish: Natural Brass (NB) and Verde Green Patina (VG). Distribution: Specify “SP” for spot distribution; specify “NF” for narrow flood distribution.
Fixture1 C736SP / 6L3K120 C736SP / 6L5K120 C737NF / 6L3K120 C737NF / 6L5K120 1
Source2 7.2W, 6 LED’s, 3500K 7.2W, 6 LED’s, 5100K 7.2W, 6 LED’s, 3500K 7.2W 6 LED’s, 5100K
SP = Spot, NF = Narrow Flood .07 Max Amps.
2
Finish NB- Natural Brass VG - Verde Green Patina
9" (228.6 mm)
8"r.
5B" (130.2 mm)
4M"
(109.5 mm)
K" NPT
2B"
6 Emitters LED 6 Watt
(54.0 mm)
Listings and Ratings UL cUL 15981
IP66 Rated
25C Ambient
Suitable for wet locations
1
U.S. PATENT D424,731
KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job:
Page: 2 of 6
Fixture Options Ordered Separately from Fixture Lens Accessories Cat. No. (See right) No Option
HL73 - Hex Cell Louver: Constructed of hex cell aluminum louvers providing 45° cutoff, mounted in a circular frame, finished in baked high-heat flat black. Can be used in combination with colored lenses. Inserts behind lens into lens gasket. Cannot be used in combination with SL spread or PL prismatic lenses. Cat. No. HL73 Hex Cell Louver PL73 - Prismatic Lens: Softens lamp distribution and flattens beam spread. Best with flood lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL73 louver. Cat. No. PL73 Prismatic Lens SL73 - Spread Lens: Creates an oval beam pattern, more narrow in one beam axis. Best with spot lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL73 louver. Cat. No. SL73 Spread Lens
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job:
Page: 3 of 6
Fixture Options Ordered Separately from Fixture Copper Adjustable Glare Shield Cat. No. Finish AGS73NB Natural Copper and Brass AGS73VG Verde Green Patina No Option
Spun copper shield with 45° cut and drain hole. Includes die-cast brass lens ring. The shield is rotatable 360°. Replaces standard lens ring/hood on fixture.
Copper Full Glare Shield Cat. No. Finish FGS73NB Natural Copper and Brass FGS73VG Verde Green Patina No Option
Spun copper shield with drain hole. Includes die-cast brass lens ring. Replaces standard lens ring/hood on fixture.
Debris Screen Cat. No. Finish DS73 Black No Option
Stainless steel wire screen welded to flange, and held in place with spring clips. Screen inserts inside full glare shield only. All debris screens are black iridite colored.
5A" 128.6 mm
4F" DIA. 106.4 mm
6D" (168.3 mm)
4A" DIA. (103.2 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
31.5° cutoff
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job:
Page: 4 of 6
Mounting Options Ordered Separately from Fixture Landscape Light Post by Engineered Products Co. Cat. No. EP17 No Option
PVC fixture molded in black with K" NPT mount is corrosion free and UV resistant. Replaces EMT, conduit connectors and weatherproof boxes. 100% shatter resistant against denting and cracking. Angled bottom to eliminate cable congestion. 17K" post length x = required depth of conduit NOTE: EP17 should be used with a per UL local listedcodes fixture and grounding means (i.e., third wire) suitable for use in wet locations. “x” = required depth of conduit per local code.
3J" DIA. K" NPT Fixture Mount 2J" J"
(57.2 mm)
x
(82.6 mm)
1" (25.4 mm)
17K" 17K" 17 K"
(444.5 mm)
3K" 3K" K"
(88.9 mm)
5" 5"
(127.0 mm)
Rigid Conduit (by others)
Architectural Junction Box Cat. No. Finish JB1/BL Black JB1/DB Dark Bronze JB1/GR Verde Green No Option
Die-cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. Two K" NPSM in bottom, 17 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures. Application Notes • Elevates Accent Lights above ground cover to prevent foliage from blocking the light. • Elevates Path Lights above ground cover to achieve a greater light throw. CAUTION: junction box must be installed high enough to avoid contact with soil or standing water.
Portable Spear Mount Cat. No. J-25N No Option
Cast iron with K" NPSM fixture mount. Hot dip galvanized finish. 5.5 cu in. splice compartment. (SJTW-A) 3 wire cord and plug. 9' cord length
3" DIA. (76 mm)
K" NPSM Fixture Mount
4L"
(121 mm)
3K" DIA. (88.9 mm)
K" NPSM Fixture Mount
2J" (57.2 mm)
6E" 6E" E"
(174.6 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job:
Page: 5 of 6
Mounting Options Ordered Separately from Fixture Brass In-grade Architectural Junction Box Cat. No. JBR-2 JBR-3 JBR-21 JBR-24 No Option
Brass In-grade Staked Junction Box Cat. No. JBR30 No Option
Brass In-grade Staked Junction Box with Cord Cat. No. JBR32 No Option
Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. JBR-2 (2) K" NPT in bottom JBR-3 (2) L" NPT in bottom JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom All side taps provided with plugs. NOTE: May also be used to hard mount low voltage fixtures. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.
3L" DIA. (95.3 mm)
(12.7 mm)
3"
(76.2 mm)
JBR30 BRASS IN-GRADE STAKED JUNCTION BOX Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (2) K" NPT in bottom with (2) 19" long brass stakes NOTE: May also be used to hard mount low voltage fixtures. JBR32 BRASS IN-GRADE STAKED JUNCTION BOX WITH CORD Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (SJTW-A) 3 wire cord and plug. (2) 19" long brass stakes with 9' cord 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.
K"
K" NPSM Fixture Mount
3L" DIA.
K" NPSM Fixture Mount
(95.3 mm)
3K" (88.9 mm)
19C" (492.1 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
18D" (473.1 mm)
1" (25.4 mm)
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job:
Page: 6 of 6
Mounting Options Ordered Separately from Fixture Stanchion Mount Cat. No. Finish SM18/BL Black SM18/DB Dark Bronze SM18/GR Verde Green No Option
3" O.D. by .188" wall cast aluminum with K" NPSM fixture mount and hand hole with flush cover. Internal set screw fixture lock accessible through hand hole. Internal ground lug supplied with installed lead. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
3" DIA.
K" NPSM Fixture Mount
(76.2 mm)
6" Min. (152.4 mm) 12" Max. (304.8 mm)
18" (457.2 mm)
Optional Concrete (by others)
Surface Mount Cat. No. Finish J-27N/BL Black J-27N/DB Dark Bronze J-27N/GR Verde Green No Option
Cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. 5 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
Brass Architectural Wall Mount Cat. No. Finish JWBR/NB Natural Brass JWBR/VG Verde Green Patina No Option
Die-cast brass with K" NPSM fixture mount. Internal set screw provided for locking position. Canopy attaches to stainless steel wall plate for mounting to any standard electrical outlet box. NOTE: May also be used to hard mount low voltage fixtures.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Rigid Conduit (by others)
2F" (55.6 mm)
1L" (44.5 mm)
K" NPSM Fixture Mount
4K" (114.3 mm)
J-Box in wall (by others)
5" DIA. (127.0 mm)
K" NPSM Fixture Mount
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job: Fixture Catalog number:
Approvals:
Fixture Options: Ordered Separately from Fixture See pages 2-3
Mounting Options: / Fixture
Mode
Finish
Date: Page: 1 of 6
Ordered Separately from Fixture See pages 4-6
Specifications Housing: Die-cast brass body, lamp housing and socket enclosure. Swivel: Die-cast brass with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Lens Frame: Integral die-cast brass lens ring and glare shield. Gasketing: Silicone gaskets used throughout. Optical System: 6 LED emitters configured in a circular array, mounted on yoke. Available in “Cool White” (approx 5000+K) Driver: Electronic driver. Rated for 6 watts. Available in 120V input. -40°F. starting temperature. All drivers are Underwriters Laboratories recognized. Finish: Natural Brass (NB) and Verde Green Patina (VG). Distribution: Specify “SP” for spot distribution; specify “NF” for narrow flood distribution.
Fixture1 C736SP / 6L3K120 C736SP / 6L5K120 C737NF / 6L3K120 C737NF / 6L5K120 1
Source2 7.2W, 6 LED’s, 3500K 7.2W, 6 LED’s, 5100K 7.2W, 6 LED’s, 3500K 7.2W 6 LED’s, 5100K
SP = Spot, NF = Narrow Flood .07 Max Amps.
2
Finish NB- Natural Brass VG - Verde Green Patina
9" (228.6 mm)
8"r.
5B" (130.2 mm)
4M"
(109.5 mm)
K" NPT
2B"
6 Emitters LED 6 Watt
(54.0 mm)
Listings and Ratings UL cUL 15981
IP66 Rated
25C Ambient
Suitable for wet locations
1
U.S. PATENT D424,731
KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job:
Page: 2 of 6
Fixture Options Ordered Separately from Fixture Lens Accessories Cat. No. (See right) No Option
HL73 - Hex Cell Louver: Constructed of hex cell aluminum louvers providing 45° cutoff, mounted in a circular frame, finished in baked high-heat flat black. Can be used in combination with colored lenses. Inserts behind lens into lens gasket. Cannot be used in combination with SL spread or PL prismatic lenses. Cat. No. HL73 Hex Cell Louver PL73 - Prismatic Lens: Softens lamp distribution and flattens beam spread. Best with flood lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL73 louver. Cat. No. PL73 Prismatic Lens SL73 - Spread Lens: Creates an oval beam pattern, more narrow in one beam axis. Best with spot lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL73 louver. Cat. No. SL73 Spread Lens
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job:
Page: 3 of 6
Fixture Options Ordered Separately from Fixture Copper Adjustable Glare Shield Cat. No. Finish AGS73NB Natural Copper and Brass AGS73VG Verde Green Patina No Option
Spun copper shield with 45° cut and drain hole. Includes die-cast brass lens ring. The shield is rotatable 360°. Replaces standard lens ring/hood on fixture.
Copper Full Glare Shield Cat. No. Finish FGS73NB Natural Copper and Brass FGS73VG Verde Green Patina No Option
Spun copper shield with drain hole. Includes die-cast brass lens ring. Replaces standard lens ring/hood on fixture.
Debris Screen Cat. No. Finish DS73 Black No Option
Stainless steel wire screen welded to flange, and held in place with spring clips. Screen inserts inside full glare shield only. All debris screens are black iridite colored.
5A" 128.6 mm
4F" DIA. 106.4 mm
6D" (168.3 mm)
4A" DIA. (103.2 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
31.5° cutoff
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job:
Page: 4 of 6
Mounting Options Ordered Separately from Fixture Landscape Light Post by Engineered Products Co. Cat. No. EP17 No Option
PVC fixture molded in black with K" NPT mount is corrosion free and UV resistant. Replaces EMT, conduit connectors and weatherproof boxes. 100% shatter resistant against denting and cracking. Angled bottom to eliminate cable congestion. 17K" post length x = required depth of conduit NOTE: EP17 should be used with a per UL local listedcodes fixture and grounding means (i.e., third wire) suitable for use in wet locations. “x” = required depth of conduit per local code.
3J" DIA. K" NPT Fixture Mount 2J" J"
(57.2 mm)
x
(82.6 mm)
1" (25.4 mm)
17K" 17K" 17 K"
(444.5 mm)
3K" 3K" K"
(88.9 mm)
5" 5"
(127.0 mm)
Rigid Conduit (by others)
Architectural Junction Box Cat. No. Finish JB1/BL Black JB1/DB Dark Bronze JB1/GR Verde Green No Option
Die-cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. Two K" NPSM in bottom, 17 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures. Application Notes • Elevates Accent Lights above ground cover to prevent foliage from blocking the light. • Elevates Path Lights above ground cover to achieve a greater light throw. CAUTION: junction box must be installed high enough to avoid contact with soil or standing water.
Portable Spear Mount Cat. No. J-25N No Option
Cast iron with K" NPSM fixture mount. Hot dip galvanized finish. 5.5 cu in. splice compartment. (SJTW-A) 3 wire cord and plug. 9' cord length
3" DIA. (76 mm)
K" NPSM Fixture Mount
4L"
(121 mm)
3K" DIA. (88.9 mm)
K" NPSM Fixture Mount
2J" (57.2 mm)
6E" 6E" E"
(174.6 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job:
Page: 5 of 6
Mounting Options Ordered Separately from Fixture Brass In-grade Architectural Junction Box Cat. No. JBR-2 JBR-3 JBR-21 JBR-24 No Option
Brass In-grade Staked Junction Box Cat. No. JBR30 No Option
Brass In-grade Staked Junction Box with Cord Cat. No. JBR32 No Option
Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. JBR-2 (2) K" NPT in bottom JBR-3 (2) L" NPT in bottom JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom All side taps provided with plugs. NOTE: May also be used to hard mount low voltage fixtures. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.
3L" DIA. (95.3 mm)
(12.7 mm)
3"
(76.2 mm)
JBR30 BRASS IN-GRADE STAKED JUNCTION BOX Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (2) K" NPT in bottom with (2) 19" long brass stakes NOTE: May also be used to hard mount low voltage fixtures. JBR32 BRASS IN-GRADE STAKED JUNCTION BOX WITH CORD Die-cast brass with K" NPSM fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (SJTW-A) 3 wire cord and plug. (2) 19" long brass stakes with 9' cord 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes • Creates a flush-mounted appearance. • May be cast in concrete for increased stability. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from junction box.
K"
K" NPSM Fixture Mount
3L" DIA.
K" NPSM Fixture Mount
(95.3 mm)
3K" (88.9 mm)
19C" (492.1 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
18D" (473.1 mm)
1" (25.4 mm)
Scarab C736 / C737 TM
120 Volt Die-Cast Brass LED revision 8/15/11 • c736c737.pdf
Type: Job:
Page: 6 of 6
Mounting Options Ordered Separately from Fixture Stanchion Mount Cat. No. Finish SM18/BL Black SM18/DB Dark Bronze SM18/GR Verde Green No Option
3" O.D. by .188" wall cast aluminum with K" NPSM fixture mount and hand hole with flush cover. Internal set screw fixture lock accessible through hand hole. Internal ground lug supplied with installed lead. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
3" DIA.
K" NPSM Fixture Mount
(76.2 mm)
6" Min. (152.4 mm) 12" Max. (304.8 mm)
18" (457.2 mm)
Optional Concrete (by others)
Surface Mount Cat. No. Finish J-27N/BL Black J-27N/DB Dark Bronze J-27N/GR Verde Green No Option
Cast aluminum with K" NPSM fixture mount. Internal set screw provided for locking position. 5 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. NOTE: May also be used to hard mount low voltage fixtures.
Brass Architectural Wall Mount Cat. No. Finish JWBR/NB Natural Brass JWBR/VG Verde Green Patina No Option
Die-cast brass with K" NPSM fixture mount. Internal set screw provided for locking position. Canopy attaches to stainless steel wall plate for mounting to any standard electrical outlet box. NOTE: May also be used to hard mount low voltage fixtures.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Rigid Conduit (by others)
2F" (55.6 mm)
1L" (44.5 mm)
K" NPSM Fixture Mount
4K" (114.3 mm)
J-Box in wall (by others)
5" DIA. (127.0 mm)
K" NPSM Fixture Mount
