6810 Variable Speed Ultra Cable Feeder™ One person operation saves on labor.
Cable pulling made faster and easier... During a cable pull, pulling the cable off the reels is the most labor intensive and hardest part of the job. The Greenlee 6810 Ultra Cable Feeder eliminates both of these problems. The 6810 pulls multiple cables off reels at one time, and it requires only a single person to operate it. The speed of the 6810 is easy to adjust to match the speed of the cable puller. It can be easily operated by either the included pendant or by the optional 445 foot switch to control feeding.
Greenlee’s patented design features dual motors driving each wheel for traction on both sides of the cable. Finally, the Greenlee Ultra Cable Feeder provides the operator with two cable loading methods – top-loading and end-loading. All of these features add up to real value on the job. Don’t set up another cable pull without the Greenlee 6810 Ultra Cable Feeder™.
www.greenlee.com
Features
USA Tel: 800.435.0786 Fax: 800.451.2632
• Feeds cable at variable speeds to match the speed of cable puller. • Accommodates cable ranging in size up to 88.9 mm (3.5”) in diameter. • Sets up easily and can be operated by just one person. • Dual motors drive each wheel for traction on both sides of the cable. • Comes with pendant and toggle switch. An optional foot switch is available to control feeding. • Two cable loading methods: top-loading and end-loading. • Patented.
Maximum Tractive Force: Single Cable: 0.9 kN (200 lbs.) All Cables: 3.5 kN (800 lbs.) Quantity x Size 8 x 120 mm2 (8 x 250 MCM) 6 x 240 mm2 (6 x 500 MCM) 5 x 300 mm2 (5 x 750 MCM)
Reel Weight Capacity:
11,300 kg total (25,000 lbs.)
Size:
1040 mm x 699 mm x 953 mm (41” long x 27.5” wide x 37.5” high)