cadworx plant pro training
29 JANUARY — 01 FEBRUARY 2018
CADWORX PLANT PRO TRAINING
GENERAL SCOPE
COURSE SUMMARY
This course has been produced to teach you how to use CADWorx Plant’s features and utilities to get the best efficiency and productivity gains possible.
This course will include the following topics:
The course demonstrates the functionality of combining AutoCAD with CADWorx Plant to create an impressive engineering pipework design solution. Starting with the simpler features and, by creating a small plant model, the training will gradually build to more complex commands. As the course progresses, we will use the features to produce the associated GAs and isometrics, as well as other required outputs. Chempute Software will provide training venue, computers, training dongles, printed training notes, teas, lunches, course certificate
WHO SHOULD ATTEND
New users of CADWorx who would like to get a thorough understanding of the software fundamentals and workflows
Existing User can attend to update their knowledge on new updates and refresh their skillsets
CAD Managers / Administrators
CADWorx Plant - Introduction - Accessing Commands - Setup Drawings - Line Numbering - Creating a 2D/3D Drawing - UCS Manipulation and the use of Viewpoints - 3D Modeling techniques - Advanced piping options - Working with Specifications - Working with a Project Database - CAESAR II Interface - Producing Layout Drawings - User Shapes CADWorx Structure - Structure Overview - Creating a 3D Pipe Rack - Structure Editor - Column Grids - Automatic Ladders, Stairs, Handrails, Grating and Decking - Creating a structure 3D Parametric Equipment - Creating a 3D Pump - Model a Heat Exchanger - Creating Vessel and Tanks Isogen Isometrics - I-Configure - CADWorx ISOGEN Settings - ISOGEN Drawing Generation Utilities CADWorx Design Review - Workspace - Opening Files in CDR - Basic Navigation - Views and Animations - Redlining
HOW TO ENROL Complete the registration form and fax it to 031 764 5934 or e-mail through to [email protected].
PRESENTER Werner Theron
Acknowledgement will be faxed or e-mailed back to you.
Final confirmation of your booking and all details of the course will be faxed or e-mailed to you only on receipt of full payment for the course. Form to be completed by each delegate
CONDITIONS OF REGISTRATION
By signing and returning this form, you will be registered on the course and will be liable for payment. Please ensure that you have proper authorisation to do this.
Cancellations are accepted in writing and without penalty up to 14 days prior to the start of the training.
Delegates cancelling in writing between 7 and 14 days prior to the start of the training will be liable for 25% of the training cost. Delegates cancelling in writing less than 7 days prior to the start of the training will be liable for 50% of the training cost. Full Payment needs to be received by Chempute Software prior to the training. In case of insufficient delegates for the training, Chempute Software may cancel this course. In this case, registered delegates will be notified, and any payments will be refunded.
Werner Theron is currently the CAD applications manager for Chempute Software, a position he has held since 2008, after he joined Chempute Software, ICAS Global Network Partner, in 2006. He graduated from the Academy of Advanced Design in 1998 as a multidisciplinary designer before working for a large electronics / telecommunications firm and then later working for consulting engineers and then in the manufacturing industry. He has been using AutoCAD as a design tool since Version 13. His duties include sales, pre-sales demonstrations, technical support and also training and implementation of the CADWorx products.
He has been an instructor at CAU@HxGN Live 2013 – 2015 and also won first prize in the 2012 CADWorx & Analysis Solutions Knowledge Base Advisor contest for 30 CADWorx articles.
COURSE NAME
DATES
CADWorx Plant Pro Training
29 January — 01 February 2018
TIMES
DURATION
8:00 a.m.—4:30 p.m.
4 Days
LOCATION Chempute Software / Unit G14 Pinewood Office Park, Pinewood Square, 33 Riley road, Woodmead, Sandton
Delegates Information: Title:
Name:
Surname:
Full Company Name: Vat Registration Number: Postal Address (to which invoice must be sent):
Job Title:
Code: Tel:
Cell:
E-mail: Special Dietary Requirements:
Contact/Accounts Information: Title: Tel:
Name:
Surname: Fax:
E-mail: Course: 1st Delegate 2nd / Additional Delegates from same Company Less 10 %
R 8 900 Excl. VAT
I have read and agreed to all the conditions of enrolment and payment as stipulated in this registration form: Signature:
Date:
DIRECTIONS TO THE VENUE:
Chempute Software, Unit G14, Pinewood Square, Pinewood Office Park, 33 Riley road, Woodmead, Sandton
Telephone: 031 764 6840 / 011 803 6559 for directions.
DIRECTIONS FROM PRETORIA:
Get on N1 from Francis Baard St/N4 and Exit 145 Take N1 Continue on N1. Drive from Pretoria Main Rd to Sandton. Take exit 100-Sandton from N1 Western Bypass Use the right lane to merge onto Rivonia Rd/M9 Use the right 2 lanes to turn right onto Witkoppen Rd Turn right onto Bowling Ave Turn left at the 1st cross street onto Riley Rd
DIRECTIONS FROM JOHANNESBURG:
Take M31 and Houghton Dr to De Villiers Graaff Motorway/M1 Follow De Villiers Graaff Motorway/M1 to Woodmead Dr/R55 in Sandton. Take exit 29 from De Villiers Graaff Motorway/M1 Use the left 2 lanes to turn left onto Woodlands Dr Turn right onto Lincoln St Turn left onto Plymouth St Plymouth St turns right and becomes Hillman St Continue onto Riley Rd
CADWORX PLANT PRO TRAINING
GENERAL SCOPE
COURSE SUMMARY
This course has been produced to teach you how to use CADWorx Plant’s features and utilities to get the best efficiency and productivity gains possible.
This course will include the following topics:
The course demonstrates the functionality of combining AutoCAD with CADWorx Plant to create an impressive engineering pipework design solution. Starting with the simpler features and, by creating a small plant model, the training will gradually build to more complex commands. As the course progresses, we will use the features to produce the associated GAs and isometrics, as well as other required outputs. Chempute Software will provide training venue, computers, training dongles, printed training notes, teas, lunches, course certificate
WHO SHOULD ATTEND
New users of CADWorx who would like to get a thorough understanding of the software fundamentals and workflows
Existing User can attend to update their knowledge on new updates and refresh their skillsets
CAD Managers / Administrators
CADWorx Plant - Introduction - Accessing Commands - Setup Drawings - Line Numbering - Creating a 2D/3D Drawing - UCS Manipulation and the use of Viewpoints - 3D Modeling techniques - Advanced piping options - Working with Specifications - Working with a Project Database - CAESAR II Interface - Producing Layout Drawings - User Shapes CADWorx Structure - Structure Overview - Creating a 3D Pipe Rack - Structure Editor - Column Grids - Automatic Ladders, Stairs, Handrails, Grating and Decking - Creating a structure 3D Parametric Equipment - Creating a 3D Pump - Model a Heat Exchanger - Creating Vessel and Tanks Isogen Isometrics - I-Configure - CADWorx ISOGEN Settings - ISOGEN Drawing Generation Utilities CADWorx Design Review - Workspace - Opening Files in CDR - Basic Navigation - Views and Animations - Redlining
HOW TO ENROL Complete the registration form and fax it to 031 764 5934 or e-mail through to [email protected].
PRESENTER Werner Theron
Acknowledgement will be faxed or e-mailed back to you.
Final confirmation of your booking and all details of the course will be faxed or e-mailed to you only on receipt of full payment for the course. Form to be completed by each delegate
CONDITIONS OF REGISTRATION
By signing and returning this form, you will be registered on the course and will be liable for payment. Please ensure that you have proper authorisation to do this.
Cancellations are accepted in writing and without penalty up to 14 days prior to the start of the training.
Delegates cancelling in writing between 7 and 14 days prior to the start of the training will be liable for 25% of the training cost. Delegates cancelling in writing less than 7 days prior to the start of the training will be liable for 50% of the training cost. Full Payment needs to be received by Chempute Software prior to the training. In case of insufficient delegates for the training, Chempute Software may cancel this course. In this case, registered delegates will be notified, and any payments will be refunded.
Werner Theron is currently the CAD applications manager for Chempute Software, a position he has held since 2008, after he joined Chempute Software, ICAS Global Network Partner, in 2006. He graduated from the Academy of Advanced Design in 1998 as a multidisciplinary designer before working for a large electronics / telecommunications firm and then later working for consulting engineers and then in the manufacturing industry. He has been using AutoCAD as a design tool since Version 13. His duties include sales, pre-sales demonstrations, technical support and also training and implementation of the CADWorx products.
He has been an instructor at CAU@HxGN Live 2013 – 2015 and also won first prize in the 2012 CADWorx & Analysis Solutions Knowledge Base Advisor contest for 30 CADWorx articles.
COURSE NAME
DATES
CADWorx Plant Pro Training
29 January — 01 February 2018
TIMES
DURATION
8:00 a.m.—4:30 p.m.
4 Days
LOCATION Chempute Software / Unit G14 Pinewood Office Park, Pinewood Square, 33 Riley road, Woodmead, Sandton
Delegates Information: Title:
Name:
Surname:
Full Company Name: Vat Registration Number: Postal Address (to which invoice must be sent):
Job Title:
Code: Tel:
Cell:
E-mail: Special Dietary Requirements:
Contact/Accounts Information: Title: Tel:
Name:
Surname: Fax:
E-mail: Course: 1st Delegate 2nd / Additional Delegates from same Company Less 10 %
R 8 900 Excl. VAT
I have read and agreed to all the conditions of enrolment and payment as stipulated in this registration form: Signature:
Date:
DIRECTIONS TO THE VENUE:
Chempute Software, Unit G14, Pinewood Square, Pinewood Office Park, 33 Riley road, Woodmead, Sandton
Telephone: 031 764 6840 / 011 803 6559 for directions.
DIRECTIONS FROM PRETORIA:
Get on N1 from Francis Baard St/N4 and Exit 145 Take N1 Continue on N1. Drive from Pretoria Main Rd to Sandton. Take exit 100-Sandton from N1 Western Bypass Use the right lane to merge onto Rivonia Rd/M9 Use the right 2 lanes to turn right onto Witkoppen Rd Turn right onto Bowling Ave Turn left at the 1st cross street onto Riley Rd
DIRECTIONS FROM JOHANNESBURG:
Take M31 and Houghton Dr to De Villiers Graaff Motorway/M1 Follow De Villiers Graaff Motorway/M1 to Woodmead Dr/R55 in Sandton. Take exit 29 from De Villiers Graaff Motorway/M1 Use the left 2 lanes to turn left onto Woodlands Dr Turn right onto Lincoln St Turn left onto Plymouth St Plymouth St turns right and becomes Hillman St Continue onto Riley Rd
