Canon EOS 30 Side Panel With Remote Control Socket Replacement
Canon EOS 30 Side Panel With Remote Control Socket Replacement
Canon EOS 30 Side Panel With Remote Control Socket Replacement How to remove the side panel with Remote Control Socket.
Written By: Sterling Vinson
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
INTRODUCTION Removing the side panel with Remote Control Socket is safe and simple. It only requires a screwdriver.
TOOLS: Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
Step 1 — Front Panel
Remove two 4.8 mm black screws on the front of the camera.
Remove one 4.3 mm black screw under the lens ring and one 4.8 mm black screw on the bottom of the camera.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
Step 3
Remove one 4.8 mm black screw on the left side.
Remove the front panel by lifting out the side opposite the grip.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
Step 5 — Bottom Panel
Remove seven 4.25 mm black screws on the bottom panel.
Remove the bottom panel.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
Step 7 — Side Panel With Remote Control Socket
Remove two 6.5 mm black screws from the panel.
Remove plastic Remote Control Socket cap by pulling it straight out.
Step 8
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
Step 9
Slide panel toward bottom of camera to remove.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-07 04:04:05 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement How to remove the side panel with Remote Control Socket.
Written By: Sterling Vinson
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
INTRODUCTION Removing the side panel with Remote Control Socket is safe and simple. It only requires a screwdriver.
TOOLS: Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
Step 1 — Front Panel
Remove two 4.8 mm black screws on the front of the camera.
Remove one 4.3 mm black screw under the lens ring and one 4.8 mm black screw on the bottom of the camera.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
Step 3
Remove one 4.8 mm black screw on the left side.
Remove the front panel by lifting out the side opposite the grip.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
Step 5 — Bottom Panel
Remove seven 4.25 mm black screws on the bottom panel.
Remove the bottom panel.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
Step 7 — Side Panel With Remote Control Socket
Remove two 6.5 mm black screws from the panel.
Remove plastic Remote Control Socket cap by pulling it straight out.
Step 8
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
Canon EOS 30 Side Panel With Remote Control Socket Replacement
Step 9
Slide panel toward bottom of camera to remove.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-07 04:04:05 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
