Canon PIXMA iP3600 Printhead Replacement

Canon PIXMA iP3600 Printhead Replacement

Canon PIXMA iP3600 Printhead Replacement How to replace the printhead.

Written By: Caitlyn

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 6

Canon PIXMA iP3600 Printhead Replacement

INTRODUCTION If your printed documents or images are becoming distorted due to a dysfunctional printhead, use this guide to replace the printhead.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 6

Canon PIXMA iP3600 Printhead Replacement

Step 1 — Ink Cartridges 

Press the power button to turn on the printer.



Pull down the front output tray cover.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 6

Canon PIXMA iP3600 Printhead Replacement

Step 3 

Lift the printer lid.



Allow the belt, containing ink cartridges, to adjust and center so that the ink cartridges are visible.

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 6

Canon PIXMA iP3600 Printhead Replacement

Step 5



Push in the white clip to release the ink cartridge from the printhead.



Lift the ink cartridge from the printhead.



Repeat this process for the remaining ink cartridges.



You have successfully removed all ink cartridges.

Step 6 — Printhead



© iFixit — CC BY-NC-SA

www.iFixit.com

After removing all ink cartridges, lift the printhead lock lever.

Page 5 of 6

Canon PIXMA iP3600 Printhead Replacement

Step 7 

Pull up and lift out the black piece that previously held the ink cartridges. This is the printhead.



You have successfully removed your printhead.

Step 8

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-23 03:52:42 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 6 of 6