Canon PowerShot A200 Batteries Replacement
Canon PowerShot A200 Batteries Replacement
Canon PowerShot A200 Batteries Replacement Replace old batteries for new ones.
Written By: Ellen Chambers
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Canon PowerShot A200 Batteries Replacement
INTRODUCTION Take out old, dead, batteries. Then replace them with new ones.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Canon PowerShot A200 Batteries Replacement
Step 1 — Batteries
Tilt the camera until this side is facing up.
Gently push on the outer batter case to pop it open.
It should now look like this.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Canon PowerShot A200 Batteries Replacement
Step 2
You will now see a second battery cover.
Push down on the latch, and pop it open.
The batteries should now be easily accessible to remove.
Step 3
© iFixit — CC BY-NC-SA
www.iFixit.com
After removing the batteries, insert new batteries. (make sure they are facing the correct direction)
Now push the inner cover down to secure the batteries in place.
Push down and forward on the outer cover to secure the latch. Your camera will now be fully charged.
Page 4 of 5
Canon PowerShot A200 Batteries Replacement
Congratulations, you're done. This document was last generated on 2017-06-25 11:41:26 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Canon PowerShot A200 Batteries Replacement Replace old batteries for new ones.
Written By: Ellen Chambers
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Canon PowerShot A200 Batteries Replacement
INTRODUCTION Take out old, dead, batteries. Then replace them with new ones.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Canon PowerShot A200 Batteries Replacement
Step 1 — Batteries
Tilt the camera until this side is facing up.
Gently push on the outer batter case to pop it open.
It should now look like this.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Canon PowerShot A200 Batteries Replacement
Step 2
You will now see a second battery cover.
Push down on the latch, and pop it open.
The batteries should now be easily accessible to remove.
Step 3
© iFixit — CC BY-NC-SA
www.iFixit.com
After removing the batteries, insert new batteries. (make sure they are facing the correct direction)
Now push the inner cover down to secure the batteries in place.
Push down and forward on the outer cover to secure the latch. Your camera will now be fully charged.
Page 4 of 5
Canon PowerShot A200 Batteries Replacement
Congratulations, you're done. This document was last generated on 2017-06-25 11:41:26 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
