Canon PowerShot SX280 HS LCD Replacement - The-Eye.eu!
Canon PowerShot SX280 HS LCD Screen Replacement
Canon PowerShot SX280 HS LCD Screen Replacement Replace the LCD Screen in your Canon PowerShot SX280 HS.
Written By: Osmand A Munoz
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
INTRODUCTION This guide teaches you how to replace your broken or worn Canon PowerShot SX280 HS LCD screen. It will show you how to remove and install a new screen. The process is safe and easy. It requires no special skills.
TOOLS:
PARTS:
IFixIt Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
LCD screen for Canon Powershot SX280 HS (1)
www.iFixit.com
Page 2 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
Step 1 — LCD Screen
Turn off the camera and remove the battery.
Use a Phillips #00 screwdriver to remove the two 3.4 mm screws on the left side of the camera.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
Step 3
Using the same screwdriver, remove the two 3.4 mm screws on the bottom of the camera.
Lift the small plastic tab, located on the front of the camera, to remove the GPS cover.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
Step 5
Using the same Phillips screwdriver, remove the two screws that hold the LCD screen.
Remove the other small tab attached to the LCD screen.
When removing the plastic casting, do not pull it all the way off. Detach the small tab first and make sure nothing else is attached to the casing.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
Step 7
To remove the tabs from the camera, remove all screws.
Slowly lift the screen out of the camera using the tabs.
Use the tabs, outlined in red, to slowly remove the LCD screen.
Remove the screws to remove the camera motherboard.
Step 8
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
Step 9
Insert the replacement LCD screen.
Ensure that the long strip is attached to the original position.
To reassemble your device, follow Steps 2 to 9 in reverse order.
Step 10
This document was last generated on 2018-02-27 11:32:15 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
Canon PowerShot SX280 HS LCD Screen Replacement Replace the LCD Screen in your Canon PowerShot SX280 HS.
Written By: Osmand A Munoz
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
INTRODUCTION This guide teaches you how to replace your broken or worn Canon PowerShot SX280 HS LCD screen. It will show you how to remove and install a new screen. The process is safe and easy. It requires no special skills.
TOOLS:
PARTS:
IFixIt Phillips #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
LCD screen for Canon Powershot SX280 HS (1)
www.iFixit.com
Page 2 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
Step 1 — LCD Screen
Turn off the camera and remove the battery.
Use a Phillips #00 screwdriver to remove the two 3.4 mm screws on the left side of the camera.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
Step 3
Using the same screwdriver, remove the two 3.4 mm screws on the bottom of the camera.
Lift the small plastic tab, located on the front of the camera, to remove the GPS cover.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
Step 5
Using the same Phillips screwdriver, remove the two screws that hold the LCD screen.
Remove the other small tab attached to the LCD screen.
When removing the plastic casting, do not pull it all the way off. Detach the small tab first and make sure nothing else is attached to the casing.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
Step 7
To remove the tabs from the camera, remove all screws.
Slowly lift the screen out of the camera using the tabs.
Use the tabs, outlined in red, to slowly remove the LCD screen.
Remove the screws to remove the camera motherboard.
Step 8
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
Canon PowerShot SX280 HS LCD Screen Replacement
Step 9
Insert the replacement LCD screen.
Ensure that the long strip is attached to the original position.
To reassemble your device, follow Steps 2 to 9 in reverse order.
Step 10
This document was last generated on 2018-02-27 11:32:15 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
