Canon Powershot SX500 IS Back Cover Replacement
Canon Powershot SX500 IS Back Cover Replacement
Canon Powershot SX500 IS Back Cover Replacement The back cover replacement will fix any cracks or scratches on the cover and is a prerequisite for many of the other replacement guides.
Written By: Jody Wilkerson
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
Canon Powershot SX500 IS Back Cover Replacement
INTRODUCTION User will need PH00 screwdriver and plastic pry tools for this replacement guide.
TOOLS: Phillips #00 Screwdriver (1) iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 7
Canon Powershot SX500 IS Back Cover Replacement
Step 1 — Battery
Rotate the camera to expose the underside of the camera.
Slide the rounded rectangle tab to the left to release the battery cover.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
Canon Powershot SX500 IS Back Cover Replacement
Step 3
Push the small orange tab forward to release the battery (Battery is ready for removal).
Step 4 — Back Cover
Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
Canon Powershot SX500 IS Back Cover Replacement
Step 5
Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
Canon Powershot SX500 IS Back Cover Replacement
Step 7
Using the Phillips 00 screwdriver, remove the three 4mm screws from the underside of the camera.
Step 8
Using the plastic pry tool, remove the back cover from camera.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-08 12:33:37 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
Canon Powershot SX500 IS Back Cover Replacement
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
Canon Powershot SX500 IS Back Cover Replacement The back cover replacement will fix any cracks or scratches on the cover and is a prerequisite for many of the other replacement guides.
Written By: Jody Wilkerson
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
Canon Powershot SX500 IS Back Cover Replacement
INTRODUCTION User will need PH00 screwdriver and plastic pry tools for this replacement guide.
TOOLS: Phillips #00 Screwdriver (1) iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 7
Canon Powershot SX500 IS Back Cover Replacement
Step 1 — Battery
Rotate the camera to expose the underside of the camera.
Slide the rounded rectangle tab to the left to release the battery cover.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
Canon Powershot SX500 IS Back Cover Replacement
Step 3
Push the small orange tab forward to release the battery (Battery is ready for removal).
Step 4 — Back Cover
Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
Canon Powershot SX500 IS Back Cover Replacement
Step 5
Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
Canon Powershot SX500 IS Back Cover Replacement
Step 7
Using the Phillips 00 screwdriver, remove the three 4mm screws from the underside of the camera.
Step 8
Using the plastic pry tool, remove the back cover from camera.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-08 12:33:37 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
Canon Powershot SX500 IS Back Cover Replacement
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7
