CAST IRON FITTINGS - Including Weights ... - Anvil International
CAST IRON FITTINGS - Including Weights & Packaging
Price Sheet PF-C.I. 3.08 | Effective: March 3, 2008 | Cancels Price Sheet PF-C.I. 6.07 of June 18, 2007
FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • Upc numbers and SPIN commodity identification numbers are available upon request. • T o obtain current ISO certifications, listings, and other approvals, visit Anvil’s Web site at www.anvilintl.com. • Pricing is subject to change without notice. Go to Anvil’s Web site for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. Price sheet applies to: Cast Iron Screwed - Drainage, Flanged Fittings and Flanges Floor and Ceiling Plates Safety Valve Discharge Elbows
EasterN Region
80 0 - 451-2935
Northern Region
80 0 -301-2701
Southern Region
80 0 - 451- 4 414
www.anvilintl.com
western Region
80 0 -572- 0 051
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08
6. SHIPMENTS:
1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.
2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.
3. WARRANTY: Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.
5. RETURNS: Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.
Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.
7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.
8. PRICES AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated.
9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.
10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (for death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to self-insure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.
11. MINIMUM INVOICE: Domestic: $100 plus transportation. International: $500 plus transportation.
12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.
4. SELLER’S LIABILITY:
Revised:
All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment.
NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments (weighing less than 2,500 pounds) will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments.
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS 90° Elbow Fig. 351 1⁄4 3⁄8 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8
®BLK ®BLK ®BLK ®BLK ®BLK
$8.16 $11.80 $5.18 $5.40 $6.38 $9.06 $12.53 $19.57 $46.93 $76.84 $208.72 $142.46 $303.51 $393.29 $961.73
-
80 40 150 100 45 25 15 20 BULK BULK BULK BULK BULK BULK BULK
$362.47 $442.26 $514.18 $1,142.56 $1,113.23
16.00 25.00 40.00 60.00 92.00 144.00 195.00 313.00 494.00 721.00 967.00 1217.00 2146.00 3133.00 6456.00
-
BULK BULK BULK BULK BULK
1022.00 1325.00 2156.00 4050.00 8006.00
-
BULK BULK 150 100 60 35 25 20 10 BULK BULK BULK BULK BULK BULK
16.00 23.00 37.00 55.00 83.00 133.00 179.00 289.00 429.00 644.00 842.00 1064.00 1696.00 2602.00 5017.00
45° Elbow Fig. 356 $9.78 $10.51 $7.92 $7.96 $9.34 $12.56 $20.80 $24.01 $62.43 $98.88 $219.36 $205.57 $450.80 $578.51 $1,157.19
1⁄4 3⁄8 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8
22¹/₂° Elbow Fig. 356A $42.00 $42.85 $65.26 $87.49 $112.86 $154.43
3⁄4 1 11⁄4 11⁄2 2 21⁄2
-
BULK BULK BULK BULK BULK BULK
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS 90° Elbow, Reducing Fig. 352
90° Elbow, Flange & Screw Fig. 371 21⁄2 3 4 6 8
SIZE
ORDER QTY.
52.00 80.00 140.00 164.00 250.00 395.00
¹⁄₂ x ³⁄₈ ¹⁄₂ x ¹⁄₄ ³⁄₄ x ¹⁄₂ 1 x ³⁄₄ 1 x ¹⁄₂ 1¹⁄₄ x 1 1¹⁄₄ x ³⁄₄ 1¹⁄₄ x ¹⁄₂ 1¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x 1 1¹⁄₂ x ³⁄₄ 1¹⁄₂ x ¹⁄₂ 2 x 1¹⁄₂ 2 x 1¹⁄₄ 2x1 2 x ³⁄₄ 2 x ¹⁄₂ 2¹⁄₂ x 2 2¹⁄₂ x 1¹⁄₂ 2¹⁄₂ x 1¹⁄₄ 2¹⁄₂ x 1 3 x 2¹⁄₂ 3x2 3 x 1¹⁄₂ 3 x 1¹⁄₄ 3¹⁄₂ x 3 4x3 4 x 2¹⁄₂ 4x2 5x4 6x5 6x4 6x3 8x6
®BLK ®BLK ®BLK
®BLK
$15.99 $12.75 $10.87 $9.08 $8.06 $11.43 $13.03 $12.82 $23.10 $21.10 $21.10 $22.64 $30.90 $33.04 $30.90 $30.90 $35.22 $62.41 $70.38 $72.06 $72.06 $117.82 $108.54 $117.82 $117.82 $142.90 $201.03 $201.03 $201.03 $449.90 $595.77 $595.77 $595.77 $1,156.32
-
BULK BULK 120 70 70 40 50 55 25 30 BULK BULK 25 25 15 15 15 BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
34.00 40.00 51.00 76.00 67.00 121.00 102.00 107.00 174.00 144.00 155.00 153.00 259.00 233.00 208.00 220.00 222.00 401.00 368.00 341.00 293.00 644.00 525.00 565.00 598.00 895.00 1063.00 1127.00 1189.00 1647.00 2666.00 2353.00 1943.00 5111.00
45° Reducing Elbow Fig. 356R 1 x ¹⁄₂
$15.32
-
BULK
95.00
$12.77 $12.40 $8.06 $9.41 $8.36 $15.27 $19.85 $27.64 $71.81 $110.19 $222.26 $214.94 $571.71 $649.05 $1,467.34
-
BULK BULK 100 60 30 20 20 10 BULK BULK BULK BULK BULK BULK BULK
22.00 35.00 56.00 84.00 125.00 203.00 270.00 423.00 667.00 1000.00 1329.00 1633.00 2733.00 4085.00 7900.00
Tee Fig. 358 1⁄4 3⁄8 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8
®BLK ®BLK ®BLK
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Tee Reducing Fig. 359 ¹⁄₂ x ¹⁄₂ x ¹⁄₄ ¹⁄₂ x ¹⁄₂ x ³⁄₈ ¹⁄₂ x ¹⁄₂ x ³⁄₄ ¹⁄₂ x ¹⁄₂ x 1 ³⁄₄ x ¹⁄₄ x ³⁄₄ ³⁄₄ x ¹⁄₂ x ¹⁄₂ ³⁄₄ x ¹⁄₂ x ³⁄₄ ³⁄₄ x ³⁄₄ x ¹⁄₄ ³⁄₄ x ³⁄₄ x ³⁄₈ ³⁄₄ x ³⁄₄ x ¹⁄₂ ³⁄₄ x ³⁄₄ x 1 1 x ¹⁄₄ x 1 1 x ¹⁄₂ x ¹⁄₂ 1 x ¹⁄₂ x ³⁄₄ 1 x ¹⁄₂ x 1 1 x ³⁄₄ x ¹⁄₂ 1 x ³⁄₄ x ³⁄₄ 1 x ³⁄₄ x 1 1 x 1 x ¹⁄₄ 1 x 1 x ¹⁄₂ 1 x 1 x ³⁄₄ 1 x 1 x 1¹⁄₄ 1 x 1 x 1¹⁄₂ 1x1x2 1¹⁄₄ x ¹⁄₂ x ¹⁄₂ 1¹⁄₄ x ¹⁄₂ x 1 1¹⁄₄ x ¹⁄₂ x 1¹⁄₄ 1¹⁄₄ x ³⁄₄ x ³⁄₄ 1¹⁄₄ x ³⁄₄ x 1 1¹⁄₄ x ³⁄₄ x 1¹⁄₄ 1¹⁄₄ x 1 x ¹⁄₂ 1¹⁄₄ x 1 x ³⁄₄ 1¹⁄₄ x 1 x 1 1¹⁄₄ x 1 x 1¹⁄₄ 1¹⁄₄ x 1 x 1¹⁄₂ 1¹⁄₄ x 1 x 2 1¹⁄₄ x 1¹⁄₄ x ¹⁄₂ 1¹⁄₄ x 1¹⁄₄ x ³⁄₄ 1¹⁄₄ x 1¹⁄₄ x 1 1¹⁄₄ x 1¹⁄₄ x 1¹⁄₂ 1¹⁄₄ x 1¹⁄₄ x 2 1¹⁄₂ x ¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x ¹⁄₂ x 1¹⁄₂ 1¹⁄₂ x ³⁄₄ x 1¹⁄₂ 1¹⁄₂ x 1 x ¹⁄₂ 1¹⁄₂ x 1 x ³⁄₄ 1¹⁄₂ x 1 x 1 1¹⁄₂ x 1 x 1¹⁄₄ 1¹⁄₂ x 1 x 1¹⁄₂ 1¹⁄₂ x 1 x 2 1¹⁄₂ x 1¹⁄₄ x ¹⁄₂ 1¹⁄₂ x 1¹⁄₄ x ³⁄₄ 1¹⁄₂ x 1¹⁄₄ x 1 1¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ 1¹⁄₂ x 1¹⁄₄ x 1¹⁄₂ 1¹⁄₂ x 1¹⁄₄ x 2 1¹⁄₂ x 1¹⁄₂ x ¹⁄₂ 1¹⁄₂ x 1¹⁄₂ x ³⁄₄ 1¹⁄₂ x 1¹⁄₂ x 1 1¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x 1¹⁄₂ x 2
®BLK
®BLK
®BLK ®BLK
®BLK ®BLK
®BLK ®BLK
®BLK ®BLK ®BLK
$19.35 $16.76 $15.17 $17.46 $21.64 $15.17 $15.17 $16.79 $15.57 $13.08 $15.35 $19.63 $18.84 $17.17 $12.44 $17.17 $15.76 $12.63 $18.92 $9.43 $11.33 $18.09 $29.15 $55.64 $35.98 $27.37 $23.32 $27.25 $27.25 $22.25 $15.28 $17.28 $15.10 $16.66 $27.98 $51.77 $15.07 $16.37 $15.10 $27.98 $43.46 $35.45 $31.20 $30.48 $32.38 $31.32 $27.98 $32.38 $23.33 $43.73 $21.26 $22.48 $19.67 $27.98 $27.98 $42.83 $19.67 $21.26 $19.67 $27.98 $30.60
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK 70 BULK BULK BULK BULK 45 BULK 50 45 BULK 50 45 20 BULK BULK BULK BULK 25 BULK BULK 25 35 30 20 20 25 BULK 30 25 20 20 BULK BULK 20 BULK BULK 25 20 25 25 BULK 25 20 20 20 10 15 20 20 30 25 10
SIZE
ORDER QTY.
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Tee Reducing Fig. 359 (Continued) 57.00 57.00 68.00 100.00 79.00 64.00 75.00 62.00 75.00 76.00 99.00 108.00 90.00 91.00 108.00 89.00 100.00 113.00 101.00 101.00 111.00 149.00 184.00 270.00 100.00 138.00 164.00 127.00 143.00 173.00 127.00 136.00 153.00 179.00 207.00 266.00 147.00 157.00 173.00 229.00 281.00 193.00 214.00 218.00 175.00 170.00 172.00 208.00 229.00 291.00 167.00 179.00 197.00 228.00 250.00 307.00 184.00 195.00 213.00 244.00 323.00
1¹⁄₂ x 1¹⁄₂ x 2¹⁄₂ $94.41 2 x ¹⁄₂ x 1¹⁄₂ $50.31 2 x ¹⁄₂ x 2 $43.73 2 x ³⁄₄ x 1¹⁄₄ $50.31 2 x ³⁄₄ x 1¹⁄₂ $50.31 2 x ³⁄₄ x 2 $39.93 2x1x1 $49.12 2 x 1 x 1¹⁄₄ $50.31 2 x 1 x 1¹⁄₂ $40.87 2x1x2 $44.06 2 x 1 x 2¹⁄₂ $94.41 2 x 1¹⁄₄ x ¹⁄₂ $50.31 2 x 1¹⁄₄ x ³⁄₄ $55.64 2 x 1¹⁄₄ x 1 $49.12 2 x 1¹⁄₄ x 1¹⁄₄ $43.73 2 x 1¹⁄₄ x 1¹⁄₂ $50.31 2 x 1¹⁄₄ x 2 $38.03 2 x 1¹⁄₄ x 2¹⁄₂ $94.41 2 x 1¹⁄₂ x ¹⁄₂ $31.92 2 x 1¹⁄₂ x ³⁄₄ $31.92 2 x 1¹⁄₂ x 1 $27.89 2 x 1¹⁄₂ x 1¹⁄₄ $43.68 2 x 1¹⁄₂ x 1¹⁄₂ $42.83 2 x 1¹⁄₂ x 2 $38.03 2 x 1¹⁄₂ x 2¹⁄₂ $81.49 2 x 2 x ¹⁄₂ $27.89 2 x 2 x ³⁄₄ $27.89 2x2x1 ®BLK $27.89 2 x 2 x 1¹⁄₄ $31.31 2 x 2 x 1¹⁄₂ $33.11 2 x 2 x 2¹⁄₂ $71.01 2x2x3 $128.03 2¹⁄₂ x ¹⁄₂ x 2¹⁄₂ $85.24 2¹⁄₂ x ³⁄₄ x 2¹⁄₂ $83.29 2¹⁄₂ x 1 x 2 $94.41 2¹⁄₂ x 1 x 2¹⁄₂ $83.36 2¹⁄₂ x 1¹⁄₄ x 2 $94.41 2¹⁄₂ x 1¹⁄₄ x 2¹⁄₂ $94.41 2¹⁄₂ x 1¹⁄₂ x 1¹⁄₂ $94.41 2¹⁄₂ x 1¹⁄₂ x 2 $94.41 2¹⁄₂ x 1¹⁄₂ x 2¹⁄₂ $94.41 2¹⁄₂ x 2 x ¹⁄₂ $94.41 2¹⁄₂ x 2 x ³⁄₄ $79.83 2¹⁄₂ x 2 x 1 $81.43 2¹⁄₂ x 2 x 1¹⁄₄ $94.41 2¹⁄₂ x 2 x 2 $83.36 2¹⁄₂ x 2 x 1¹⁄₂ $90.51 2¹⁄₂ x 2 x 2¹⁄₂ $81.77 2¹⁄₂ x 2 x 3 $141.90 2¹⁄₂ x 2¹⁄₂ x ¹⁄₂ $90.51 2¹⁄₂ x 2¹⁄₂ x ³⁄₄ $81.43 2¹⁄₂ x 2¹⁄₂ x 1 $79.83 2¹⁄₂ x 2¹⁄₂ x 1¹⁄₄ $81.43 2¹⁄₂ x 2¹⁄₂ x 1¹⁄₂ $83.36 2¹⁄₂ x 2¹⁄₂ x 2 $81.43 2¹⁄₂ x 2¹⁄₂ x 3 $141.90 2¹⁄₂ x 2¹⁄₂ x 4 $367.66 3 x ¹⁄₂ x 3 $173.86 3 x ³⁄₄ x 3 $145.37 3x1x3 $141.90 3 x 1¹⁄₄ x 3 $141.90
-
BULK BULK 10 BULK BULK 15 15 BULK BULK 15 BULK BULK BULK 15 15 BULK 15 BULK 25 20 20 15 15 15 BULK 20 20 15 15 15 BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
415.00 295.00 330.00 250.00 340.00 331.00 270.00 294.00 285.00 346.00 488.00 248.00 250.00 273.00 290.00 313.00 371.00 454.00 234.00 246.00 266.00 298.00 324.00 370.00 546.00 274.00 286.00 305.00 338.00 359.00 517.00 787.00 520.00 510.00 503.00 536.00 496.00 540.00 423.00 485.00 485.00 582.00 362.00 392.00 426.00 517.00 442.00 600.00 735.00 400.00 429.00 448.00 483.00 514.00 588.00 809.00 1403.00 760.00 825.00 830.00 846.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Tee Reducing Fig. 359 (Continued) 3 x 1¹⁄₂ x 3 3 x 2 x 1¹⁄₂ 3x2x2 3 x 2 x 2¹⁄₂ 3x2x3 3 x 2¹⁄₂ x 1 3 x 2¹⁄₂ x 1¹⁄₄ 3 x 2¹⁄₂ x 1¹⁄₂ 3 x 2¹⁄₂ x 2 3 x 2¹⁄₂ x 2¹⁄₂ 3 x 2¹⁄₂ x 3 3 x 3 x ¹⁄₂ 3 x 3 x ³⁄₄ 3x3x1 3 x 3 x 1¹⁄₄ 3 x 3 x 1¹⁄₂ 3x3x2 3 x 3 x 2¹⁄₂ 3x3x4 3¹⁄₂ x 3¹⁄₂ x 1¹⁄₂ 3¹⁄₂ x 3¹⁄₂ x 2 4x1x4 4 x 1¹⁄₄ x 4 4 x 1¹⁄₂ x 4 4x2x2 4x2x4 4 x 2¹⁄₂ x 2¹⁄₂ 4 x 2¹⁄₂ x 4 4x3x2 4 x 3 x 2¹⁄₂ 4x3x3 4x3x4 4 x 4 x ³⁄₄ 4x4x1 4 x 4 x 1¹⁄₄ 4 x 4 x 1¹⁄₂ 4x4x2 4 x 4 x 2¹⁄₂ 4x4x3 4x4x5 4x4x6 5x5x2 5 x 5 x 2¹⁄₂ 5x5x3 5x5x4 6x4x4 6 x 6 x 2¹⁄₂ 6x6x3 6x6x4 6x6x5
$141.90 $141.90 $141.90 $135.22 $141.90 $186.89 $135.22 $186.89 $141.90 $141.90 $141.90 $186.89 $186.89 $119.51 $130.74 $141.90 $122.04 $141.90 $338.82 $323.91 $323.91 $246.09 $269.95 $269.95 $290.21 $283.29 $347.10 $283.29 $290.21 $269.95 $373.10 $283.29 $373.10 $343.78 $310.46 $283.29 $249.89 $261.07 $276.72 $640.12 $640.02 $640.12 $621.36 $640.12 $621.36 $798.82 $822.90 $798.82 $822.90 $798.82
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
SIZE
ORDER QTY.
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Cross Fig. 360 813.00 683.00 729.00 710.00 879.00 551.00 592.00 623.00 681.00 766.00 913.00 608.00 606.00 627.00 675.00 710.00 775.00 892.00 1280.00 887.00 994.00 1352.00 1435.00 1347.00 1134.00 1389.00 1178.00 1575.00 1021.00 1125.00 1250.00 1504.00 1058.00 1040.00 1038.00 1075.00 1163.00 1285.00 1412.00 2088.00 2636.00 1743.00 1884.00 2000.00 2383.00 3000.00 2567.00 2746.00 3244.00 3700.00
1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 4 5 6
$22.21 $22.21 $25.86 $36.49 $50.64 $67.06 $157.05 $274.90 $480.87 s $923.37 $978.52
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
280.00 103.00 159.00 242.00 321.00 528.00 807.00 1184.00 1963.00 3116.00 4767.00
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
130.00 204.00 251.00 395.00 390.00 267.00 274.00 400.00 322.00 408.00 418.00 425.00 357.00 682.00 568.00 526.00 539.00 506.00 723.00 613.00 511.00 885.00 791.00 1200.00
Cross Reducing Fig. 361 1 x 1 x ³⁄₄ x ³⁄₄ 1¹⁄₄ x 1¹⁄₄ x 1 x 1 1¹⁄₂ x 1¹⁄₂ x 1 x 1 1¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ 1¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ x 1 1¹⁄₂ x 1¹⁄₄ x 1 x 1 1¹⁄₂ x 1 x 1 x 1 2 x 2 x 1¹⁄₄ x 1¹⁄₄ 2x2x1x1 2 x 2 x 1¹⁄₂ x 1¹⁄₂ 2 x 1¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ 2 x 1¹⁄₂ x 1¹⁄₄ x 1 2 x 1¹⁄₂ x 1 x 1 2¹⁄₂ x 2¹⁄₂ x 2 x 2 2¹⁄₂ x 2¹⁄₂ x 1¹⁄₂ x 1¹⁄₂ 2¹⁄₂ x 2¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ 2¹⁄₂ x 2¹⁄₂ x 1¹⁄₄ x 1 2¹⁄₂ x 2¹⁄₂ x 1 x 1 2¹⁄₂ x 2 x 2 x 2 2¹⁄₂ x 2 x 1¹⁄₂ x 1¹⁄₂ 2¹⁄₂ x 2 x 1 x 1 3x3x2x2 3 x 3 x 1¹⁄₂ x 1¹⁄₂ 4x4x2x2
$35.22 $41.94 $49.88 $58.38 $79.57 $58.38 $67.78 $74.79 $68.29 $67.00 $128.26 $128.26 $100.70 $179.48 $184.63 $200.37 $200.37 $184.63 $200.37 $200.37 $200.37 $317.34 $317.34 $548.27
-
Screwed Hex Coupling Fig. 366 1
$11.03
-
60
82.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
SIZE
STANDARD SCREWED CAST IRON FITTINGS Flanged Union Gasket Type Fig. 487 $69.39 $91.52 $88.68 $104.89 $96.79 $113.92 $154.26 $174.50 $296.05 $237.29 $553.03 $519.14 s $1,154.19
1⁄₂ ³⁄₄ 1 11⁄₄ 11⁄₂ 2 21⁄₂ 3 31⁄₂ 4 5 6 8
$167.73 s $203.16 $203.16 s $254.40 s $296.88 $305.53 $459.89 $609.68 $808.87 $1,095.25 $2,709.86
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
$14.46 $9.80 $7.40 $25.40 $21.71 $28.39 $35.95 $35.95 $40.16 $44.62 $47.02 $49.12 $41.88 $47.02 $52.21 $66.82 $74.32 $103.07 $81.89 $112.56 $211.26 $211.26 $211.26 $289.71 $334.96 $382.89 $1,667.79
-
175.00 200.00 225.00 475.00 500.00 650.00 850.00 1100.00 1275.00 1800.00 2200.00 3000.00 5100.00
BULK 70 80 BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
40.00 63.00 54.00 107.00 90.00 84.00 145.00 150.00 120.00 100.00 198.00 178.00 183.00 190.00 200.00 298.00 310.00 440.00 396.00 431.00 701.00 778.00 650.00 1048.00 1553.00 1383.00 2910.00
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
45.00 61.00 57.00 100.00 100.00 90.00 126.00 121.00 117.00 111.00 193.00 187.00
Eccentric Reducer Fig. 368 $30.42 $32.85 $31.93 $52.50 $48.93 $47.57 $66.34 $69.39 $69.39 $66.08 $87.99 $86.25
³⁄₄ x ¹⁄₂ 1 x ³⁄₄ 1 x ¹⁄₂ 1¹⁄₄ x ¹⁄₂ 1¹⁄₄ x 1 1¹⁄₄ x ³⁄₄ 1¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x 1 1¹⁄₂ x ³⁄₄ 1¹⁄₂ x ¹⁄₂ 2 x 1¹⁄₂ 2 x 1¹⁄₄
-
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Eccentric Reducer Fig. 368 (Continued)
Concentric Reducer Fig. 367 ³⁄₄ x ¹⁄₂ 1 x ³⁄₄ (Hex) ®BLK 1 x ¹⁄₂ (Hex) ®BLK 1¹⁄₄ x 1 1¹⁄₄ x ³⁄₄ 1¹⁄₄ x ¹⁄₂ 1¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x 1 1¹⁄₂ x ³⁄₄ 1¹⁄₂ x ¹⁄₂ 2 x 1¹⁄₂ 2 x 1¹⁄₄ 2x1 2 x ³⁄₄ 2 x ¹⁄₂ 2 ¹⁄₂ x 2 2¹⁄₂ x 1¹⁄₂ 3 x 2¹⁄₂ 3x2 3 x ³⁄₄ 4x3 4 x 2¹⁄₂ 4x2 5x4 6x5 6x4 8x6
ORDER QTY.
$90.56 $97.22 $86.25 $130.65 $133.77 $133.77 $133.77 $194.67 $161.98 $179.97 $211.26 $211.26 $293.45 $381.12 $381.12 $381.12 $354.54 $381.12 $466.23 $433.69 $433.69 $591.10 $591.10
2x1 2 x ³⁄₄ 2 x ¹⁄₂ 2 ¹⁄₂ x 2 2¹⁄₂ x 1¹⁄₂ 2¹⁄₂ x 1¹⁄₄ 2¹⁄₂ x 1 3 x 2¹⁄₂ 3x2 3 x 1¹⁄₂ 3 x 1¹⁄₄ 3x1 3¹⁄₂ x 2 4x3 4 x 2¹⁄₂ 4x2 4 x 1¹⁄₂ 4 x 1¹⁄₄ 5x4 5x3 5 x 2¹⁄₂ 6x4 6x3
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
186.00 183.00 180.00 295.00 294.00 280.00 274.00 480.00 461.00 416.00 380.00 395.00 523.00 764.00 726.00 691.00 661.00 658.00 1119.00 1144.00 1138.00 1536.00 1466.00
25 25 25 25 25 15 15 15 15 15 15 BULK 20 BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK 20
50.00 47.00 42.00 47.00 47.00 81.00 73.00 71.00 70.00 75.00 75.00 129.00 124.00 116.00 125.00 128.00 163.00 190.00 179.00 177.00 190.00 192.00 193.00 196.00 323.00 254.00 265.00 256.00 242.00 250.00 315.00 329.00 311.00
Hex Bushing Fig. 383 1¹⁄₂ x 1 1¹⁄₂ x ³⁄₄ 1¹⁄₂ x ¹⁄₂ 1¹⁄₂ x ³⁄₈ 1¹⁄₂ x ¹⁄₄ 2 x 1¹⁄₄ 2x1 2 x ³⁄₄ 2 x ¹⁄₂ 2 x ³⁄₈ 2 x ¹⁄₄ 2¹⁄₂ x 1¹⁄₂ 2¹⁄₂ x 1¹⁄₄ 2¹⁄₂ x 1 2¹⁄₂ x ³⁄₄ 2¹⁄₂ x ¹⁄₂ 3 x 2¹⁄₂ 3x2 3 x 1¹⁄₂ 3 x 1¹⁄₄ 3x1 3 x ³⁄₄ 3 x ¹⁄₂ 3¹⁄₂ x 3 3¹⁄₂ x 2¹⁄₂ 3¹⁄₂ x 2 3¹⁄₂ x 1¹⁄₂ 3¹⁄₂ x 1¹⁄₄ 3¹⁄₂ x 1 4 x 3¹⁄₂ 4x3 4 x 2¹⁄₂ 4x2
®BLK ®BLK
®BLK ®BLK
$7.08 $8.06 $8.06 $12.03 $10.60 $9.67 $9.67 $10.13 $12.80 $14.40 $11.43 $15.50 $17.82 $17.82 $17.82 $16.61 $20.85 $17.98 $24.08 $24.08 $24.08 $26.15 $26.80 $42.21 $46.87 $45.76 $46.87 $46.87 $46.87 $54.55 $40.56 $49.08 $40.56
$14.68 $16.23 $16.23 $20.89 $20.89 $18.93 $18.93 $18.93 $20.37 $24.22 $23.66 $31.02 $34.46 $34.46 $34.46 $34.46 $37.96 s $35.35 $40.91 $44.41 $45.46 $45.46 $45.46 $80.74 $80.74 $80.74 $80.74 $73.69 $73.69 $95.29 $74.23 $95.29 $74.23
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
SIZE
STANDARD SCREWED CAST IRON FITTINGS Hex Bushing Fig. 383 (Continued) 4 x 1¹⁄₂ 4 x 1¹⁄₄ 4x1 5x4 5 x 3¹⁄₂ 5x3 5 x 2¹⁄₂ 5x2 6x5 6x4 6x3 6 x 2¹⁄₂ 6x2 8x6 8x5 8x4 8x3 10 x 8 10 x 6
$50.24 $54.55 $54.55 $82.58 $86.26 $85.03 $94.51 $94.51 $97.49 $84.40 $97.50 $108.36 $97.50 $183.72 $189.85 $204.09 $244.10 $752.79 $745.64
$53.08 s$100.99 $92.17
$95.29 $95.29 $95.29 $157.32 $161.09 $147.05 $161.09 $182.25 $171.93 $182.25 $182.25 $317.69 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
344.00 354.00 359.00 394.00 400.00 483.00 487.00 512.00 524.00 683.00 775.00 772.00 800.00 1319.00 1365.00 1393.00 1550.00 2200.00 2450.00
-
BULK BULK BULK
1330.00 1920.00 255.00
Square Head Plugs, Cored Fig. 387 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4
®BLK ®BLK ®BLK ®BLK
$2.59 $2.59 $4.14 $5.87 $6.84 $16.66 $19.30 $47.09 $39.01
®GALV ®GALV ®GALV
$5.55 $5.55 $9.26 $12.52 $15.54 $32.85 $42.08 $76.83 $112.28
120 60 30 25 15 10 BULK BULK BULK
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Bar Plugs, Cored Fig. 389
Face Bushing Fig. 385 3x2 4x3 4 x 2¹⁄₂
ORDER QTY.
13.00 25.00 39.00 50.00 82.00 132.00 187.00 250.00 400.00
$39.76 $74.74 $97.57 $212.97
4 5 6 8
$81.60 $162.23 $184.55 $416.03
BULK BULK BULK BULK
382.00 650.00 994.00 2026.00
BULK BULK BULK
568.00 960.00 1478.00
Bar Plugs, Solid Fig. 380 4 5 6
$87.50 s $162.62 $194.30
-
Counter Sunk Plugs Fig. 390 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4
$8.96 $9.37 $11.22 $16.54 $26.15 $42.73 $74.09 $115.17
$17.62 $18.63 $25.03 $35.05 -
60 30 25 15 10 BULK BULK BULK
20.00 32.00 47.00 84.00 140.00 225.00 302.00 376.00
$44.30 $58.28 $83.83 $127.65 $159.91 $440.86
$633.49 $861.87
BULK BULK BULK BULK BULK BULK
255.00 410.00 640.00 1070.00 1420.00 2723.00
-
BULK BULK BULK
113.00 160.00 110.00
Cap Fig. 381 21⁄2 3 4 5 6 8
Locknut Fig. 370 Square Head Plugs, Solid Fig. 388 $2.29 $6.94 ®BLK $7.40 $8.52 $12.08 $15.59 $23.06 $39.34 $90.42
1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2
$5.14 $14.71 $16.67 $18.16 $24.22 $34.52 $44.43 $78.36 -
150 120 60 30 25 15 10 BULK BULK
10.00 17.00 32.00 53.00 76.00 123.00 200.00 318.00 438.00
21⁄2 3 4
$29.06 $38.03 $57.64
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
SIZE
STANDARD SCREWED CAST IRON FITTINGS Floor Flange Fig. 1190 (Ductile Iron) 1⁄4 3⁄8* 1⁄2 3⁄4 1 11⁄4 11⁄2 2
ORDER QTY.
X.H. 90° Elbow Fig. 421 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
$36.56 $35.31 $42.38 $69.84 $76.84 $109.27 $188.69
SIZE
$42.20 $42.20 $40.47 $40.42 $48.81 $72.79 $93.66 $116.20 $247.96 $338.17 $657.98
$72.03 $73.18 $85.91 $114.24 $97.33 $144.56 $144.56 $144.56 $196.57 $196.57 $167.44 $159.44
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
137.00 219.00 203.00 349.00 321.00 498.00 426.00 402.00 769.00 711.00 657.00 624.00
List Price ORDER UNFINISHED ORDER QTY. $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
-
191.00 304.00 709.00 1369.00
90° Short Turn Elbow Fig. 701* 11⁄2 2 3 4
$31.08 $46.79 $175.78 $278.37
$46.05 $66.55 $263.04 $511.91
90° Reducing Short Turn Elbow Fig. 701R* -
BULK BULK BULK BULK BULK BULK BULK
66.00 104.00 156.00 270.00 355.00 607.00 979.00
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
47.00 70.00 120.00 157.00 243.00 394.00 531.00 901.00 1423.00 2095.00 3398.00
1¹⁄₂ x 1¹⁄₄ 2 x 1¹⁄₂
X.H. Tee Fig. 425 1⁄4 3⁄8 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 4
WGT PER 100
CAST IRON DRAINAGE
37.00 75.00 113.00 179.00 300.00 405.00 676.00 1056.00 1525.00 2615.00
X.H. 45° Elbow Fig. 424 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2
QTY. CARTON EACH
X.H. Reducing Tee Fig. 426 ³⁄₄ x ³⁄₄ x ¹⁄₂ 1 x 1 x ³⁄₄ 1 x 1 x ¹⁄₂ 1¹⁄₄ x 1¹⁄₄ x 1 1¹⁄₄ x 1¹⁄₄ x ³⁄₄ 1¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x 1¹⁄₂ x 1 1¹⁄₂ x 1¹⁄₂ x ³⁄₄ 2 x 2 x 1¹⁄₂ 2 x 2 x 1¹⁄₄ 2x2x1 2 x 2 x ³⁄₄
STANDARD SCREWED CAST IRON FITTINGS X.H. STANDARD SCREWED C.I. FITTINGS $28.63 $25.65 $27.11 $32.80 $48.81 $60.57 $74.74 $174.78 $230.86 $483.52
GALV. $/EA.
STANDARD SCREWED CAST IRON FITTINGS X.H. STANDARD SCREWED C.I. FITTINGS
See Malleable Price Sheet Page 5 for List Price
1⁄4 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 4
List Price BLACK ORDER $/EA. QTY.
$54.46 $63.57
-
-
169.00 249.00
-
224.00 361.00 904.00 1640.00
90° Long Turn Elbow Fig. 702* 11⁄2 2 3 4
$43.48 $64.74 $236.13 $392.14
$52.36 $89.89 -
90° Extra Long Turn Elbow Fig. 702A* 11⁄2 2
$56.15 $97.10
-
-
262.00 454.00
-
234.00
60° Short Turn Elbow Fig. 703 11⁄2
$56.25
-
Weights are Weights for black are for fittings black| For or unfinished galvanized,fittings add 100% | Fortogalvanized, the black list addprice 100% unless to thetheblack galvanized list pricelist unless pricethe is listed galvanized | s Extended list price lead is listed times |s and/or Extended minimum lead times order quantities and/or minimum | q -order Sold inquantities box only, blk/galv q - Sold in box only, blk/galv | * Tapped pitched ¹⁄₄” to foot.
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 List Price ORDER UNFINISHED ORDER QTY. $/EA. QTY.
SIZE
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
SIZE
CAST IRON DRAINAGE $30.38 $43.85 $171.74 $268.45
$45.52 $65.14 $226.68 $370.40
-
171.00 279.00 631.00 1144.00
45° Long Turn Elbow Fig. 706 $42.68
11⁄2
$51.81
-
214.00
$49.37 $73.83
-
165.00 308.00
-
-
181.00 269.00
221/2° Elbow Fig. 707 $38.28 $51.01
11⁄2 2
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
-
416.00 433.00
-
-
582.00
$211.14
-
443.00 669.00
-
-
523.00
$77.72 $155.81 $537.32 $847.69
-
403.00 556.00 1200.00 2451.00
-
483.00 2063.00
-
-
509.00
$99.49
-
175.00
-
404.00 540.00 2000.00
CAST IRON DRAINAGE
45° Short Turn Elbow Fig. 705 11⁄2 2 3 4
List Price ORDER UNFINISHED ORDER QTY. $/EA. QTY.
90° Reducing Short Turn Y-Branch Tee Pattern Fig. 727* 2 x 2 x 1¹⁄₂ 2 x 1¹⁄₂ x 1¹⁄₂
$84.97 $84.97
-
90° Reducing Short Turn Y-Branch Tee Pattern Fig. 729* 2 x 1¹⁄₂
$126.25
90° Long Turn Y-Branch Tee Pattern Fig. 730* 11⁄2 2
$83.79 $130.65
111/4° Elbow Fig. 708 $40.75 $73.79
11⁄2 2
90° Reducing Long Turn Y-Branch Tee Pattern Fig. 731* 2 x 2 x 1¹⁄₂
$137.13
90° Street Elbow Fig. 718* $44.30 s $58.65
11⁄2 2
$58.32 $91.38
-
205.00 310.00
11⁄2 2 3 4
45° Street Elbow Fig. 719 $41.38 $66.97
11⁄2 2
45° Y-Branch Fig. 734
$60.35 $92.87
-
$61.41 $114.52 $384.14 $589.38
164.00 267.00
45° Reducing Y-Branch Fig. 735 Tee Fig. 722* $51.05 $84.42
11⁄2 2
$69.23 $115.86
-
259.00 466.00
2 x 2 x 1¹⁄₂ 4x4x3
$113.23 $615.47
$167.62 -
45° Double Y-Branch Fig. 736 11⁄2
Reducing Tee Fig. 723* $96.11
2 x 2 x 1¹⁄₂
-
-
$148.88
377.00
Coupling Fig. 753 11⁄2
90° Short Turn Y-Branch Tee Pattern Fig. 726* $50.14 $82.64 $295.58 $450.88
11⁄2 2 3 4
$70.07 $114.51 $444.01 $552.76
-
309.00 508.00 1177.00 2125.00
$103.65
Tucker Connection Fig. 744 11⁄2 2 4
$85.63 $105.35 $421.57
-
Weights are for black or unfinished fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities q - Sold in box only, blk/galv | * Tapped pitched ¹⁄₄” to foot.
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ListPrice Price List ORDER UNFINISHED ORDER ORDER BLACK ORDER QTY. $/EA. QTY. QTY. $/EA. QTY.
SIZE SIZE
GALV. GALV. $/EA. $/EA.
QTY.CARTON CARTON WGT WGT QTY. EACH PER100 100 EACH PER
CAST IRON DRAINAGE P-Trap Fig. 752 $91.24 $146.07 $459.08 $1,098.73
11⁄2 2 3 4
SIZE SIZE
CAST IRON FLANGED, STANDARD* 90° Reducing Flanged Elbow Fig. 803 (Continued)
$125.70 $220.01 $675.87 $1,663.80
-
469.00 718.00 1687.00 3057.00
-
-
387.00 625.00
Bath P-Trap Fig. 754 $93.87 $150.25
11⁄2 2
List Price Quantity List Price ORDER ORDER BLACKBLACKORDERORDERGALV. GALV.MSTR. QTY.CARTON CARTON WGT WGT QTY.QTY. $/EA.$/EA. QTY. QTY. $/EA. $/EA.EACH EACH PER EACH PER100 100
CAST IRON FLANGED, STANDARD
4 x 2¹⁄₂ 4x2 5x4 5x3 6x5 6x4 6x3 8x6 8x5 8x4 10 x 8 10 x 6 12 x 10 12 x 8 12 x 6
$1,029.96 $1,029.96 $1,320.24 $1,393.27 $1,419.75 $835.69 $1,484.27 $1,219.29 $2,172.05 $1,644.20 $2,321.58 $3,391.25 $4,448.88 $5,879.04 $6,204.27
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
3100.00 2900.00 4800.00 4000.00 6000.00 5600.00 4700.00 9000.00 8200.00 7700.00 17300.00 12500.00 22000.00 19000.00 16500.00
BULK BULK BULK BULK BULK BULK BULK BULK BULK
1600.00 2300.00 2800.00 4800.00 6200.00 8500.00 14500.00 23000.00 35000.00
BULK BULK BULK BULK BULK BULK
4600.00 5800.00 8100.00 7800.00 13000.00 20500.00
STD. 125# - Faced Only, Faced & Drilled*
SIZE
ORDER QTY.
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
Quantity MSTR. CARTON EACH EACH
90° Long Radius Elbow Fig. 804 WGT PER 100
90° Flanged Elbow Fig. 801 $446.08 $272.05 $294.28 $245.62 s $682.66 $303.77 $719.43 s $475.60 $821.24 $1,799.89 $3,623.29
11⁄2 2 21⁄2 3 31⁄2 4 5 6 8 10 12
$564.56 $772.28 $761.31 $694.06 $1,462.86 $1,117.43 $1,740.57 $3,220.89 $5,374.58
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
900.00 1400.00 1900.00 2400.00 3100.00 4100.00 5200.00 6800.00 11000.00 17500.00 25000.00
45° Flanged Elbow Fig. 802 s $538.63 $394.19 $420.46 $408.86 $460.20 $1,102.73 $752.37 $1,100.21 $2,324.76 $3,552.25
11⁄2 2 21⁄2 3 4 5 6 8 10 12
$807.67 $1,002.09 $1,397.86 $2,096.58 $4,012.63 $6,128.90
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
800.00 1200.00 1700.00 2000.00 3600.00 4500.00 6000.00 9400.00 14500.00 22000.00
90° Reducing Flanged Elbow Fig. 803 $865.27 $909.98 $834.18 $673.89
2¹⁄₂ x 2 3 x 2¹⁄₂ 3x2 4x3
-
BULK BULK BULK BULK
2 21⁄2 3 4 5 6 8 10 12
$732.62 $765.99 $791.40 $725.80 $1,379.47 $1,049.83 $2,017.90 $3,141.28 $6,472.76
-
90° Flanged Long Radius Reducing Elbow Fig. 804R 4x3 5x4 6x5 6x4 8x6 10 x 8
$1,727.59 $1,947.49 $2,391.44 $2,254.92 $4,168.04 $6,930.81
-
90° Flanged Base Elbow Fig. 805 3 4 6 8 10 12
$1,234.01 $1,180.33 $2,011.01 $2,665.10 $4,474.75 $6,162.43
-
BULK BULK BULK BULK BULK BULK
3600.00 5900.00 11000.00 15800.00 22400.00 32400.00
90° Flanged Side Outlet Elbow Fig. 808
1800.00 2200.00 1900.00 3300.00
4 6 8
$3,808.53 $4,891.55 $6,118.40
-
BULK BULK BULK
5900.00 9600.00 15000.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or and or minimum order quantities | q - Sold in box only, blk/galv * Faced only, not stocked. Galvanized fittings not stocked in all types and sizes, but may be produced to order.
Revised:
www.anvilintl.com
10
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
CAST IRON FLANGED, STANDARD* Flanged Tee Fig. 811 $512.88 $297.88 $433.86 $304.07 $462.53 $1,239.02 $671.19 $1,146.71 $3,085.47 $4,846.98
11⁄2 2 21⁄2 3 4 5 6 8 10 12
$532.67 $719.21 $722.13 $1,143.22 $1,571.88 $2,478.19 $4,703.63 $7,185.38
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
SIZE
ORDER QTY.
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
CAST IRON FLANGED, STANDARD* Flanged Cross Fig. 821 1500.00 2100.00 3000.00 3700.00 6400.00 8100.00 10500.00 16500.00 27000.00 38000.00
2 21⁄2 3 4 6 8 10
$940.18 $864.50 $907.75 $1,185.72 $2,483.25 $3,999.42 $4,744.44
-
BULK BULK BULK BULK BULK BULK BULK
2800.00 3900.00 4800.00 8200.00 13500.00 21000.00 33000.00
-
BULK BULK BULK BULK BULK BULK BULK
2500.00 3600.00 4400.00 7500.00 9600.00 12500.00 21000.00
Flanged Lateral Fig. 823 Flanged Reducing Tee Fig. 812 3 x 3 x 2¹⁄₂ 3x3x2 3 x 3 x 1¹⁄₂ 3x2x3 4x4x3 4 x 4 x 2¹⁄₂ 4x4x2 4x3x4 4x3x3 4 x 2¹⁄₂ x 4 4x2x4 3x3x4 5x5x4 5x5x3 6x6x5 6x6x4 6x6x3 6 x 6 x 2¹⁄₂ 6x6x2 6x5x4 6x4x6 6x4x4 6x3x6 4x4x6 8x8x6 8x8x4 8x8x3 8x6x8 8x6x6 8x6x4 8x4x8 8x4x6 6x6x8 10 x 10 x 8 10 x 10 x 6 10 x 10 x 4 10 x 8 x 10 10 x 8 x 8 10 x 8 x 6 12 x 12 x 10 12 x 12 x 8 12 x 12 x 6 12 x 8 x 12 12 x 8 x 8
$902.63 $706.57 $947.77 $906.53 $952.01 s $1,039.67 $952.01 $2,276.57 $2,322.14 $1,333.83 $2,168.16 $1,270.30 $2,001.39 $2,001.39 $1,783.85 $916.48 $1,333.23 $1,783.85 $1,873.05 $2,759.83 $1,055.94 $1,167.11 $2,714.94 $1,787.80 $1,431.69 $1,720.39 $3,188.20 $2,273.38 $1,720.66 $2,916.97 $2,952.40 $3,047.40 $2,273.38 $3,272.82 $3,806.24 $3,717.08 $5,032.15 $3,617.30 $5,032.15 $5,664.86 $5,746.69 $4,856.88 $7,597.88 $7,597.88
$2,070.44 $3,169.47 s $3,230.79 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
3500.00 3400.00 3200.00 3300.00 5700.00 5600.00 5100.00 5900.00 5300.00 5600.00 5000.00 5600.00 8000.00 7100.00 10500.00 9700.00 9200.00 9000.00 8600.00 9100.00 9400.00 8800.00 9100.00 8800.00 15600.00 14300.00 14000.00 15900.00 14400.00 12500.00 14600.00 14000.00 14200.00 26200.00 24000.00 22500.00 26200.00 23200.00 22000.00 36200.00 33000.00 32300.00 34000.00 29800.00
2 21⁄2 3 4 5 6 8
$1,074.37 $1,216.17 $1,300.94 $1,698.25 $2,564.63 $2,583.63 $4,233.44
Flanged Concentric Reducer Fig. 825 2 x 1¹⁄₂ 2¹⁄₂ x 2 2¹⁄₂ x 1¹⁄₂ 3 x 2¹⁄₂ 3x2 3 x 1¹⁄₂ 4x3 4 x 2¹⁄₂ 4x2 5x4 5x3 5 x 2¹⁄₂ 6x5 6x4 6x3 6 x 2¹⁄₂ 6x2 8x6 8x5 8x4 10 x 8 10 x 6 10 x 5 10 x 4 12 x 10 12 x 8 12 x 6
$854.80 $686.61 $854.80 $545.09 $545.09 $872.08 $612.45 $658.79 $728.12 $947.02 $1,077.21 $1,469.74 $900.97 $820.20 $944.21 $1,245.67 $1,647.02 $1,032.26 $1,869.17 $1,189.12 $2,128.84 $2,318.70 $3,801.62 $3,801.62 $3,671.91 $4,058.48 $4,243.40
$893.87 $1,087.18 $1,290.68 s $1,290.68 $1,584.02 $1,833.92 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
1200.00 1400.00 1200.00 1900.00 1600.00 1400.00 2800.00 2600.00 2400.00 3900.00 3200.00 3100.00 5000.00 4700.00 3900.00 3700.00 3400.00 7700.00 7100.00 6600.00 12000.00 10000.00 9000.00 8500.00 18000.00 15500.00 14000.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv * Faced only, not stocked. Galvanized fittings not stocked in all types and sizes, but may be produced to order.
Revised:
www.anvilintl.com
11
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08
SIZE SIZE
List Price List Price Quantity ORDER ORDER BLACKBLACKORDERORDERGALV. GALV. MSTR. QTY.CARTON CARTON WGT WGT QTY.QTY. $/EA.$/EA. QTY. QTY. $/EA. $/EA.EACH EACH EACH PER PER100 100
CAST IRON FLANGED, STANDARD* Flanged Eccentric Reducer Fig. 826 $834.18 $822.26 $994.06 $1,114.54 $1,148.66 $1,469.91 $938.93 $938.93 $1,567.25 $1,189.36 $1,542.80 $1,612.89 $3,029.62 $3,553.47 $4,106.64 $4,253.30
3x2 3 x 2¹⁄₂ 4x3 4 x 2¹⁄₂ 4x2 5x4 6x5 6x4 6x3 8x6 8x5 8x4 10 x 8 10 x 6 12 x 10 12 x 8
$1,764.26 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
SIZE SIZE
CAST IRON FLANGED FITTINGS X.H. Flanged Concentric Reducer Fig. 855 (Cont.) 2200.00 1600.00 2800.00 2800.00 2800.00 3900.00 5100.00 5000.00 4700.00 7700.00 7600.00 7100.00 12000.00 10700.00 18000.00 15500.00
CAST IRON FLANGED FITTINGS EXTRA HEAVY 250 LBS. FACED ONLY, FACED & DRILLED* X.H. 90° Flanged Elbow Fig. 831 $698.01 $758.83 $772.51 $1,111.62 $1,593.52 $2,608.92
2 21⁄2 3 4 6 8
-
BULK BULK BULK BULK BULK BULK
2000.00 3000.00 4000.00 6500.00 11500.00 18500.00
BULK BULK BULK BULK BULK
4600.00 5800.00 9900.00 18000.00 28000.00
$987.80 $1,106.16 $1,753.62 $2,595.33 $4,381.06
-
X.H. Flanged Reducing Tees Fig. 842 $3,558.77 $5,444.30
6x6x4 8x8x6
-
BULK BULK
16000.00 25700.00
X.H. Flanged Concentric Reducer Fig. 855 $1,325.33 $1,325.33 $1,794.88 $1,794.88 $2,504.99
3 x 2¹⁄₂ 3x2 4x3 4 x 2¹⁄₂ 6x5
-
6x4 6x3 8x6 8x4 10 x 8 10 x 6
$2,517.66 $2,504.99 $3,415.57 $3,415.57 $6,042.49 $6,042.49
-
BULK BULK BULK BULK BULK BULK
7700.00 6700.00 13000.00 10500.00 19000.00 17000.00
IRON FLANGES, STANDARD Cast Iron Companion Flange Fig. 1011 ³⁄₄ x 3⁷⁄₈ 1 x 4¹⁄₄ 1¹⁄₄ x 4⁵⁄₈ 1¹⁄₂ x 5 2x6 2¹⁄₂ x 7 3 x 7¹⁄₂ 3¹⁄₂ x 8¹⁄₂ 4x9 5 x 10 6 x 11 8 x 13¹⁄₂ 10 x 16 12 x 19
$59.01 $39.69 $47.48 $43.90 s $43.81 $51.24 $66.00 $92.48 $88.94 s $125.65 $142.18 $224.41 $397.72 $851.06
$109.74 $89.84 $103.15 $105.53 $92.80 $108.57 $131.93 $179.70 $282.12 $301.53 $523.59 $788.61 $1,566.85
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
150.00 175.00 200.00 225.00 400.00 600.00 763.00 900.00 1175.00 1400.00 1650.00 2600.00 3775.00 5050.00
Cast Iron Reducing Flange Fig. 1016
X.H. Flanged Tee Fig. 841 21⁄2 3 4 6 8
List Price Quantity List Price ORDER ORDER BLACKBLACKORDERORDERGALV. GALV.MSTR. QTY.CARTON CARTON WGT WGT QTY.QTY. $/EA.$/EA. QTY. QTY. $/EA. $/EA.EACH EACH PER EACH PER100 100
BULK BULK BULK BULK BULK
2900.00 2500.00 4400.00 4000.00 8500.00
1x5 1x6 1¹⁄₄ x 5 1¹⁄₄ x 6 1¹⁄₂ x 6 1¹⁄₂ x 7 2x7 1 x 7¹⁄₂ 1¹⁄₂ x 7¹⁄₂ 2 x 7¹⁄₂ 2¹⁄₂ x 7¹⁄₂ 3 x 8¹⁄₂ 1¹⁄₂ x 9 2x9 2¹⁄₂ x 9 3x9 3¹⁄₂ x 9 3 x 10 4 x 10 1¹⁄₂ x 11 2 x 11 2¹⁄₂ x 11 3 x 11 4 x 11
$117.30 $111.16 $111.80 $107.13 $91.70 $118.24 $85.79 $169.25 $141.75 $114.39 $122.76 $222.99 $209.37 $155.46 $166.82 s $155.46 $188.57 $287.40 $240.57 $368.53 $284.32 $337.81 $284.32 $234.49
s $181.15 $184.84 $199.63 $280.68 $268.96 $280.68 $355.57 $376.82 $355.57 $376.82 $449.30 $483.01 $566.94 $608.30 $566.94 $561.38
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
275.00 250.00 500.00 475.00 450.00 700.00 675.00 900.00 875.00 850.00 800.00 1000.00 1400.00 1400.00 1350.00 1275.00 1200.00 1700.00 1600.00 2700.00 2600.00 2500.00 2300.00 2100.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or and or minimum order quantities | q - Sold in box only, blk/galv * Faced only, not stocked. Galvanized fittings not stocked in all types and sizes, but may be produced to order.
Revised:
www.anvilintl.com
12
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08
SIZE SIZE
List Price List Price Quantity ORDER ORDER BLACKBLACKORDERORDERGALV. GALV. MSTR. QTY.CARTON CARTON WGT WGT QTY.QTY. $/EA.$/EA. QTY. QTY. $/EA. $/EA.EACH EACH EACH PER PER100 100
IRON FLANGES, STANDARD Cast Iron Reducing Flange Fig. 1016 (Continued) $297.19 $521.12 $521.12 s $401.34 $563.31 $363.83 $1,026.46 $972.39 $1,115.42 $1,193.87
5 x 11 2 x 13¹⁄₂ 3 x 13¹⁄₂ 4 x 13¹⁄₂ 5 x 13¹⁄₂ 6 x 13¹⁄₂ 6 x 16 8 x 16 6 x 19 8 x 19
$566.94 $934.13 $832.93 $895.20 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
SIZE SIZE
IRON FLANGES, EXTRA HEAVY X.H. Cast Iron Blind Flange Fig. 1021 1900.00 4400.00 4000.00 3700.00 3400.00 3100.00 5300.00 5000.00 8800.00 8100.00
1¹⁄₂ x 6¹⁄₈ 2 x 6¹⁄₂ 2¹⁄₂ x 7¹⁄₂ 3 x 8¹⁄₄ 4 x 10 5 x 11 6 x 12¹⁄₂ 8 x 15
Cast Iron Blind Flange Fig. 1018 $63.17 $66.76 $70.87 $80.05 $88.00 $105.46 $155.78 $135.08 $219.47 $238.77 $374.61 $554.19 $1,010.91
1 x 4¹⁄₄ 1¹⁄₄ x 4⁵⁄₈ 1¹⁄₂ x 5 2x6 2¹⁄₂ x 7 3 x 7¹⁄₂ 3¹⁄₂ x 8¹⁄₂ 4x9 5 x 10 6 x 11 8 x 13¹⁄₂ 10 x 16 12 x 19
$108.22 $118.22 $125.38 $182.50 $255.42 $417.01 $442.70 $585.27 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
200.00 225.00 375.00 400.00 675.00 800.00 1100.00 1400.00 1800.00 2300.00 4000.00 5900.00 8800.00
$278.27 $333.67 $397.17 $537.45 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK
375.00 575.00 650.00 950.00 1233.00 2000.00 2400.00 3200.00 5100.00
X.H. Cast Iron Reducing Flange Fig. 1030 $387.24 $387.01 $561.04 $438.76 $837.46
2 x 8¹⁄₄ 2¹⁄₂ x 8¹⁄₄ 3 x 10 4 x 11 4 x 12¹⁄₂
-
-
BULK BULK BULK BULK BULK BULK BULK BULK
525.00 700.00 1100.00 1400.00 2300.00 3100.00 4200.00 7000.00
HIGH HUB FLANGES FOR C.I. PIPE Cast Iron Flanges for Cast Iron Pipe Fig. 1010T 3 x 7¹⁄₂ 4x9 6 x 11 8 x 13¹⁄₂ 10 x 16 12 x 19
2x6 2¹⁄₂ x 7 3 x 7¹⁄₂ 4x9 6 x 11
X.H. Cast Iron Companion Flange Fig. 1025 $135.93 $159.58 $121.46 $174.74 $190.00 $308.47 $413.65 $506.51 $858.19
$175.97 $202.40 $234.06 $268.61 $392.54 $518.58 $676.05 $1,089.27
$141.11 $148.43 $209.46 $349.41 $595.19 $808.15
-
BULK BULK BULK BULK BULK BULK
750.00 1300.00 1720.00 2900.00 4200.00 6000.00
MALLEABLE IRON FLANGES 125 LB. STANDARD MALLEABLE IRON Companion Flanges Fig. 1035
IRON FLANGES, EXTRA HEAVY
1¹⁄₄ x 5¹⁄₄ 1¹⁄₂ x 6¹⁄₈ 2 x 6¹⁄₂ 2¹⁄₂ x 7¹⁄₂ 3 x 8¹⁄₄ 4 x 10 5 x 11 6 x 12¹⁄₂ 8 x 15
List Price Quantity List Price ORDER ORDER BLACKBLACKORDERORDERGALV. GALV.MSTR. QTY.CARTON CARTON WGT WGT QTY.QTY. $/EA.$/EA. QTY. QTY. $/EA. $/EA.EACH EACH PER EACH PER100 100
BULK BULK BULK BULK BULK
-
$194.85 $273.88 $338.43 $545.74 $737.59
BULK BULK BULK BULK BULK
400.00 600.00 763.00 1175.00 1650.00
SAFETY VALVE DISCHARGE ELBOWS Screwed Cast Iron Fig. 1538 21⁄2 3 4 6
$1,056.90 $1,134.71 $1,530.67 $1,599.43
-
BULK BULK BULK BULK
1200.00 1500.00 2700.00 5300.00
1425.00 1350.00 2275.00 3000.00 3950.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
13
– Notes –
– Notes –
Corporate Offices
Anvil International Worldwide Customer Service Center
110 Corporate Drive, Suite 10 P.O. Box 3180 Portsmouth, NH 03802-3180
Tel: 708-534-1414 Fax: 708-534-5441
Tel: 603-422-8000 Fax: 603-422-8033 E-mail: [email protected]
U.S. R EgIONAl SER vICE C ENtERS
CANAd A SE RvICE CEN tERS
IN tERNA tIONAl SAlES
Eastern Region
Corporate
Europe & Middle East Region
Servicing: Connecticut, Delaware, Florida, Georgia, Maine, Maryland, Massachusetts, New Hampshire, New Jersey, New York, North and South Carolina, East Pennsylvania, Rhode Island, Vermont, Virginia
390 Second Avenue
Rick van Meesen, Director of Sales
Simcoe, Ontario N3Y 4K9
The Netherlands Tel: +31-53-5725570 Fax: +31-53-5725579
800 Malleable Road Columbia, PA 17512
Western
Tel: 800-451-2935 Fax: 800-272-2983 Toll-Free: 1-800-301-2701
5506-48 St. NW
Northern Region
Central
Tel: (519) 426-4551
U.S. Customer Service Tel: +1-708-534-1414 Fax: +1-708-534-5441
Edmonton, Alberta, T6B 2Z1
latin America
Tel: (780) 413-8274
Servicing: Illinois, Indiana, Iowa, Kentucky, Michigan, Minnesota, Nebraska, North and South Dakota, Ohio, West Pennsylvania, West Virginia, Wisconsin
Abraham Quijada, Sales Manager Tel: +1-281-590-4600
390 Second Avenue Tel: (519) 426-4551
U.S. Customer Service Tel: +1-708--534-1414 Fax: +1-708-534-5441
Eastern
Puerto Rico
2615-25 Brabant-Marineau. (Saint-Laurent)
R.R. Barril, Inc.
Montreal, Quebec, H4S 1R8
Tel: +1-787-982-1550 Fax: +1-787-982-1570
Simcoe, Ontario N3Y 4K9
750 Central Avenue University Park, IL 60466 Tel: 708-534-1414 Fax: 708-534-5441 Toll-Free: 1-800-301-2701
Tel: (514) 745-3835
U.S. Customer Service Tel: +1-708-534-1414 Fax: +1-708-534-5441
Southern Region Servicing: Alabama, Arkansas, Kansas, Louisiana, Mississippi, Missouri, Oklahoma, Tennessee, Texas
Mexico
1313 Avenue R Grand Prairie, TX 75050
Jose Antonio Bueno
Tel: 972-343-9206 Fax: 972-641-8946 Toll-Free: 1-800-451-4414
Mexico Tel: +52-777-169-4546 U.S. Customer Service Tel: +1-708-534-1414 Fax: +1-708-534-5441
Western Region Servicing: Alaska, Arizona, California, Colorado, Hawaii, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, Wyoming 1385 Greg Street Sparks, NV 89431 Tel: 775-331-7029 Fax: 775-331-5075 Toll-Free: 1-800-572-0051
#580 / Printed in USA / 11.07 / ©2007
b
u
i
l
d
i
n
g
c
o
n
n
e
c
t
i
o
www.anvilintl.com
n
s
t
h
a
t
l
a
s
t
Price Sheet PF-C.I. 3.08 | Effective: March 3, 2008 | Cancels Price Sheet PF-C.I. 6.07 of June 18, 2007
FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL • Upc numbers and SPIN commodity identification numbers are available upon request. • T o obtain current ISO certifications, listings, and other approvals, visit Anvil’s Web site at www.anvilintl.com. • Pricing is subject to change without notice. Go to Anvil’s Web site for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. Price sheet applies to: Cast Iron Screwed - Drainage, Flanged Fittings and Flanges Floor and Ceiling Plates Safety Valve Discharge Elbows
EasterN Region
80 0 - 451-2935
Northern Region
80 0 -301-2701
Southern Region
80 0 - 451- 4 414
www.anvilintl.com
western Region
80 0 -572- 0 051
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08
6. SHIPMENTS:
1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.
2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.
3. WARRANTY: Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.
5. RETURNS: Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.
Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.
7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.
8. PRICES AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated.
9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.
10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (for death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to self-insure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.
11. MINIMUM INVOICE: Domestic: $100 plus transportation. International: $500 plus transportation.
12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.
4. SELLER’S LIABILITY:
Revised:
All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment.
NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments (weighing less than 2,500 pounds) will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments.
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS 90° Elbow Fig. 351 1⁄4 3⁄8 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8
®BLK ®BLK ®BLK ®BLK ®BLK
$8.16 $11.80 $5.18 $5.40 $6.38 $9.06 $12.53 $19.57 $46.93 $76.84 $208.72 $142.46 $303.51 $393.29 $961.73
-
80 40 150 100 45 25 15 20 BULK BULK BULK BULK BULK BULK BULK
$362.47 $442.26 $514.18 $1,142.56 $1,113.23
16.00 25.00 40.00 60.00 92.00 144.00 195.00 313.00 494.00 721.00 967.00 1217.00 2146.00 3133.00 6456.00
-
BULK BULK BULK BULK BULK
1022.00 1325.00 2156.00 4050.00 8006.00
-
BULK BULK 150 100 60 35 25 20 10 BULK BULK BULK BULK BULK BULK
16.00 23.00 37.00 55.00 83.00 133.00 179.00 289.00 429.00 644.00 842.00 1064.00 1696.00 2602.00 5017.00
45° Elbow Fig. 356 $9.78 $10.51 $7.92 $7.96 $9.34 $12.56 $20.80 $24.01 $62.43 $98.88 $219.36 $205.57 $450.80 $578.51 $1,157.19
1⁄4 3⁄8 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8
22¹/₂° Elbow Fig. 356A $42.00 $42.85 $65.26 $87.49 $112.86 $154.43
3⁄4 1 11⁄4 11⁄2 2 21⁄2
-
BULK BULK BULK BULK BULK BULK
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS 90° Elbow, Reducing Fig. 352
90° Elbow, Flange & Screw Fig. 371 21⁄2 3 4 6 8
SIZE
ORDER QTY.
52.00 80.00 140.00 164.00 250.00 395.00
¹⁄₂ x ³⁄₈ ¹⁄₂ x ¹⁄₄ ³⁄₄ x ¹⁄₂ 1 x ³⁄₄ 1 x ¹⁄₂ 1¹⁄₄ x 1 1¹⁄₄ x ³⁄₄ 1¹⁄₄ x ¹⁄₂ 1¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x 1 1¹⁄₂ x ³⁄₄ 1¹⁄₂ x ¹⁄₂ 2 x 1¹⁄₂ 2 x 1¹⁄₄ 2x1 2 x ³⁄₄ 2 x ¹⁄₂ 2¹⁄₂ x 2 2¹⁄₂ x 1¹⁄₂ 2¹⁄₂ x 1¹⁄₄ 2¹⁄₂ x 1 3 x 2¹⁄₂ 3x2 3 x 1¹⁄₂ 3 x 1¹⁄₄ 3¹⁄₂ x 3 4x3 4 x 2¹⁄₂ 4x2 5x4 6x5 6x4 6x3 8x6
®BLK ®BLK ®BLK
®BLK
$15.99 $12.75 $10.87 $9.08 $8.06 $11.43 $13.03 $12.82 $23.10 $21.10 $21.10 $22.64 $30.90 $33.04 $30.90 $30.90 $35.22 $62.41 $70.38 $72.06 $72.06 $117.82 $108.54 $117.82 $117.82 $142.90 $201.03 $201.03 $201.03 $449.90 $595.77 $595.77 $595.77 $1,156.32
-
BULK BULK 120 70 70 40 50 55 25 30 BULK BULK 25 25 15 15 15 BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
34.00 40.00 51.00 76.00 67.00 121.00 102.00 107.00 174.00 144.00 155.00 153.00 259.00 233.00 208.00 220.00 222.00 401.00 368.00 341.00 293.00 644.00 525.00 565.00 598.00 895.00 1063.00 1127.00 1189.00 1647.00 2666.00 2353.00 1943.00 5111.00
45° Reducing Elbow Fig. 356R 1 x ¹⁄₂
$15.32
-
BULK
95.00
$12.77 $12.40 $8.06 $9.41 $8.36 $15.27 $19.85 $27.64 $71.81 $110.19 $222.26 $214.94 $571.71 $649.05 $1,467.34
-
BULK BULK 100 60 30 20 20 10 BULK BULK BULK BULK BULK BULK BULK
22.00 35.00 56.00 84.00 125.00 203.00 270.00 423.00 667.00 1000.00 1329.00 1633.00 2733.00 4085.00 7900.00
Tee Fig. 358 1⁄4 3⁄8 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8
®BLK ®BLK ®BLK
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Tee Reducing Fig. 359 ¹⁄₂ x ¹⁄₂ x ¹⁄₄ ¹⁄₂ x ¹⁄₂ x ³⁄₈ ¹⁄₂ x ¹⁄₂ x ³⁄₄ ¹⁄₂ x ¹⁄₂ x 1 ³⁄₄ x ¹⁄₄ x ³⁄₄ ³⁄₄ x ¹⁄₂ x ¹⁄₂ ³⁄₄ x ¹⁄₂ x ³⁄₄ ³⁄₄ x ³⁄₄ x ¹⁄₄ ³⁄₄ x ³⁄₄ x ³⁄₈ ³⁄₄ x ³⁄₄ x ¹⁄₂ ³⁄₄ x ³⁄₄ x 1 1 x ¹⁄₄ x 1 1 x ¹⁄₂ x ¹⁄₂ 1 x ¹⁄₂ x ³⁄₄ 1 x ¹⁄₂ x 1 1 x ³⁄₄ x ¹⁄₂ 1 x ³⁄₄ x ³⁄₄ 1 x ³⁄₄ x 1 1 x 1 x ¹⁄₄ 1 x 1 x ¹⁄₂ 1 x 1 x ³⁄₄ 1 x 1 x 1¹⁄₄ 1 x 1 x 1¹⁄₂ 1x1x2 1¹⁄₄ x ¹⁄₂ x ¹⁄₂ 1¹⁄₄ x ¹⁄₂ x 1 1¹⁄₄ x ¹⁄₂ x 1¹⁄₄ 1¹⁄₄ x ³⁄₄ x ³⁄₄ 1¹⁄₄ x ³⁄₄ x 1 1¹⁄₄ x ³⁄₄ x 1¹⁄₄ 1¹⁄₄ x 1 x ¹⁄₂ 1¹⁄₄ x 1 x ³⁄₄ 1¹⁄₄ x 1 x 1 1¹⁄₄ x 1 x 1¹⁄₄ 1¹⁄₄ x 1 x 1¹⁄₂ 1¹⁄₄ x 1 x 2 1¹⁄₄ x 1¹⁄₄ x ¹⁄₂ 1¹⁄₄ x 1¹⁄₄ x ³⁄₄ 1¹⁄₄ x 1¹⁄₄ x 1 1¹⁄₄ x 1¹⁄₄ x 1¹⁄₂ 1¹⁄₄ x 1¹⁄₄ x 2 1¹⁄₂ x ¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x ¹⁄₂ x 1¹⁄₂ 1¹⁄₂ x ³⁄₄ x 1¹⁄₂ 1¹⁄₂ x 1 x ¹⁄₂ 1¹⁄₂ x 1 x ³⁄₄ 1¹⁄₂ x 1 x 1 1¹⁄₂ x 1 x 1¹⁄₄ 1¹⁄₂ x 1 x 1¹⁄₂ 1¹⁄₂ x 1 x 2 1¹⁄₂ x 1¹⁄₄ x ¹⁄₂ 1¹⁄₂ x 1¹⁄₄ x ³⁄₄ 1¹⁄₂ x 1¹⁄₄ x 1 1¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ 1¹⁄₂ x 1¹⁄₄ x 1¹⁄₂ 1¹⁄₂ x 1¹⁄₄ x 2 1¹⁄₂ x 1¹⁄₂ x ¹⁄₂ 1¹⁄₂ x 1¹⁄₂ x ³⁄₄ 1¹⁄₂ x 1¹⁄₂ x 1 1¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x 1¹⁄₂ x 2
®BLK
®BLK
®BLK ®BLK
®BLK ®BLK
®BLK ®BLK
®BLK ®BLK ®BLK
$19.35 $16.76 $15.17 $17.46 $21.64 $15.17 $15.17 $16.79 $15.57 $13.08 $15.35 $19.63 $18.84 $17.17 $12.44 $17.17 $15.76 $12.63 $18.92 $9.43 $11.33 $18.09 $29.15 $55.64 $35.98 $27.37 $23.32 $27.25 $27.25 $22.25 $15.28 $17.28 $15.10 $16.66 $27.98 $51.77 $15.07 $16.37 $15.10 $27.98 $43.46 $35.45 $31.20 $30.48 $32.38 $31.32 $27.98 $32.38 $23.33 $43.73 $21.26 $22.48 $19.67 $27.98 $27.98 $42.83 $19.67 $21.26 $19.67 $27.98 $30.60
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK 70 BULK BULK BULK BULK 45 BULK 50 45 BULK 50 45 20 BULK BULK BULK BULK 25 BULK BULK 25 35 30 20 20 25 BULK 30 25 20 20 BULK BULK 20 BULK BULK 25 20 25 25 BULK 25 20 20 20 10 15 20 20 30 25 10
SIZE
ORDER QTY.
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Tee Reducing Fig. 359 (Continued) 57.00 57.00 68.00 100.00 79.00 64.00 75.00 62.00 75.00 76.00 99.00 108.00 90.00 91.00 108.00 89.00 100.00 113.00 101.00 101.00 111.00 149.00 184.00 270.00 100.00 138.00 164.00 127.00 143.00 173.00 127.00 136.00 153.00 179.00 207.00 266.00 147.00 157.00 173.00 229.00 281.00 193.00 214.00 218.00 175.00 170.00 172.00 208.00 229.00 291.00 167.00 179.00 197.00 228.00 250.00 307.00 184.00 195.00 213.00 244.00 323.00
1¹⁄₂ x 1¹⁄₂ x 2¹⁄₂ $94.41 2 x ¹⁄₂ x 1¹⁄₂ $50.31 2 x ¹⁄₂ x 2 $43.73 2 x ³⁄₄ x 1¹⁄₄ $50.31 2 x ³⁄₄ x 1¹⁄₂ $50.31 2 x ³⁄₄ x 2 $39.93 2x1x1 $49.12 2 x 1 x 1¹⁄₄ $50.31 2 x 1 x 1¹⁄₂ $40.87 2x1x2 $44.06 2 x 1 x 2¹⁄₂ $94.41 2 x 1¹⁄₄ x ¹⁄₂ $50.31 2 x 1¹⁄₄ x ³⁄₄ $55.64 2 x 1¹⁄₄ x 1 $49.12 2 x 1¹⁄₄ x 1¹⁄₄ $43.73 2 x 1¹⁄₄ x 1¹⁄₂ $50.31 2 x 1¹⁄₄ x 2 $38.03 2 x 1¹⁄₄ x 2¹⁄₂ $94.41 2 x 1¹⁄₂ x ¹⁄₂ $31.92 2 x 1¹⁄₂ x ³⁄₄ $31.92 2 x 1¹⁄₂ x 1 $27.89 2 x 1¹⁄₂ x 1¹⁄₄ $43.68 2 x 1¹⁄₂ x 1¹⁄₂ $42.83 2 x 1¹⁄₂ x 2 $38.03 2 x 1¹⁄₂ x 2¹⁄₂ $81.49 2 x 2 x ¹⁄₂ $27.89 2 x 2 x ³⁄₄ $27.89 2x2x1 ®BLK $27.89 2 x 2 x 1¹⁄₄ $31.31 2 x 2 x 1¹⁄₂ $33.11 2 x 2 x 2¹⁄₂ $71.01 2x2x3 $128.03 2¹⁄₂ x ¹⁄₂ x 2¹⁄₂ $85.24 2¹⁄₂ x ³⁄₄ x 2¹⁄₂ $83.29 2¹⁄₂ x 1 x 2 $94.41 2¹⁄₂ x 1 x 2¹⁄₂ $83.36 2¹⁄₂ x 1¹⁄₄ x 2 $94.41 2¹⁄₂ x 1¹⁄₄ x 2¹⁄₂ $94.41 2¹⁄₂ x 1¹⁄₂ x 1¹⁄₂ $94.41 2¹⁄₂ x 1¹⁄₂ x 2 $94.41 2¹⁄₂ x 1¹⁄₂ x 2¹⁄₂ $94.41 2¹⁄₂ x 2 x ¹⁄₂ $94.41 2¹⁄₂ x 2 x ³⁄₄ $79.83 2¹⁄₂ x 2 x 1 $81.43 2¹⁄₂ x 2 x 1¹⁄₄ $94.41 2¹⁄₂ x 2 x 2 $83.36 2¹⁄₂ x 2 x 1¹⁄₂ $90.51 2¹⁄₂ x 2 x 2¹⁄₂ $81.77 2¹⁄₂ x 2 x 3 $141.90 2¹⁄₂ x 2¹⁄₂ x ¹⁄₂ $90.51 2¹⁄₂ x 2¹⁄₂ x ³⁄₄ $81.43 2¹⁄₂ x 2¹⁄₂ x 1 $79.83 2¹⁄₂ x 2¹⁄₂ x 1¹⁄₄ $81.43 2¹⁄₂ x 2¹⁄₂ x 1¹⁄₂ $83.36 2¹⁄₂ x 2¹⁄₂ x 2 $81.43 2¹⁄₂ x 2¹⁄₂ x 3 $141.90 2¹⁄₂ x 2¹⁄₂ x 4 $367.66 3 x ¹⁄₂ x 3 $173.86 3 x ³⁄₄ x 3 $145.37 3x1x3 $141.90 3 x 1¹⁄₄ x 3 $141.90
-
BULK BULK 10 BULK BULK 15 15 BULK BULK 15 BULK BULK BULK 15 15 BULK 15 BULK 25 20 20 15 15 15 BULK 20 20 15 15 15 BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
415.00 295.00 330.00 250.00 340.00 331.00 270.00 294.00 285.00 346.00 488.00 248.00 250.00 273.00 290.00 313.00 371.00 454.00 234.00 246.00 266.00 298.00 324.00 370.00 546.00 274.00 286.00 305.00 338.00 359.00 517.00 787.00 520.00 510.00 503.00 536.00 496.00 540.00 423.00 485.00 485.00 582.00 362.00 392.00 426.00 517.00 442.00 600.00 735.00 400.00 429.00 448.00 483.00 514.00 588.00 809.00 1403.00 760.00 825.00 830.00 846.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Tee Reducing Fig. 359 (Continued) 3 x 1¹⁄₂ x 3 3 x 2 x 1¹⁄₂ 3x2x2 3 x 2 x 2¹⁄₂ 3x2x3 3 x 2¹⁄₂ x 1 3 x 2¹⁄₂ x 1¹⁄₄ 3 x 2¹⁄₂ x 1¹⁄₂ 3 x 2¹⁄₂ x 2 3 x 2¹⁄₂ x 2¹⁄₂ 3 x 2¹⁄₂ x 3 3 x 3 x ¹⁄₂ 3 x 3 x ³⁄₄ 3x3x1 3 x 3 x 1¹⁄₄ 3 x 3 x 1¹⁄₂ 3x3x2 3 x 3 x 2¹⁄₂ 3x3x4 3¹⁄₂ x 3¹⁄₂ x 1¹⁄₂ 3¹⁄₂ x 3¹⁄₂ x 2 4x1x4 4 x 1¹⁄₄ x 4 4 x 1¹⁄₂ x 4 4x2x2 4x2x4 4 x 2¹⁄₂ x 2¹⁄₂ 4 x 2¹⁄₂ x 4 4x3x2 4 x 3 x 2¹⁄₂ 4x3x3 4x3x4 4 x 4 x ³⁄₄ 4x4x1 4 x 4 x 1¹⁄₄ 4 x 4 x 1¹⁄₂ 4x4x2 4 x 4 x 2¹⁄₂ 4x4x3 4x4x5 4x4x6 5x5x2 5 x 5 x 2¹⁄₂ 5x5x3 5x5x4 6x4x4 6 x 6 x 2¹⁄₂ 6x6x3 6x6x4 6x6x5
$141.90 $141.90 $141.90 $135.22 $141.90 $186.89 $135.22 $186.89 $141.90 $141.90 $141.90 $186.89 $186.89 $119.51 $130.74 $141.90 $122.04 $141.90 $338.82 $323.91 $323.91 $246.09 $269.95 $269.95 $290.21 $283.29 $347.10 $283.29 $290.21 $269.95 $373.10 $283.29 $373.10 $343.78 $310.46 $283.29 $249.89 $261.07 $276.72 $640.12 $640.02 $640.12 $621.36 $640.12 $621.36 $798.82 $822.90 $798.82 $822.90 $798.82
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
SIZE
ORDER QTY.
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Cross Fig. 360 813.00 683.00 729.00 710.00 879.00 551.00 592.00 623.00 681.00 766.00 913.00 608.00 606.00 627.00 675.00 710.00 775.00 892.00 1280.00 887.00 994.00 1352.00 1435.00 1347.00 1134.00 1389.00 1178.00 1575.00 1021.00 1125.00 1250.00 1504.00 1058.00 1040.00 1038.00 1075.00 1163.00 1285.00 1412.00 2088.00 2636.00 1743.00 1884.00 2000.00 2383.00 3000.00 2567.00 2746.00 3244.00 3700.00
1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 4 5 6
$22.21 $22.21 $25.86 $36.49 $50.64 $67.06 $157.05 $274.90 $480.87 s $923.37 $978.52
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
280.00 103.00 159.00 242.00 321.00 528.00 807.00 1184.00 1963.00 3116.00 4767.00
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
130.00 204.00 251.00 395.00 390.00 267.00 274.00 400.00 322.00 408.00 418.00 425.00 357.00 682.00 568.00 526.00 539.00 506.00 723.00 613.00 511.00 885.00 791.00 1200.00
Cross Reducing Fig. 361 1 x 1 x ³⁄₄ x ³⁄₄ 1¹⁄₄ x 1¹⁄₄ x 1 x 1 1¹⁄₂ x 1¹⁄₂ x 1 x 1 1¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ 1¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ x 1 1¹⁄₂ x 1¹⁄₄ x 1 x 1 1¹⁄₂ x 1 x 1 x 1 2 x 2 x 1¹⁄₄ x 1¹⁄₄ 2x2x1x1 2 x 2 x 1¹⁄₂ x 1¹⁄₂ 2 x 1¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ 2 x 1¹⁄₂ x 1¹⁄₄ x 1 2 x 1¹⁄₂ x 1 x 1 2¹⁄₂ x 2¹⁄₂ x 2 x 2 2¹⁄₂ x 2¹⁄₂ x 1¹⁄₂ x 1¹⁄₂ 2¹⁄₂ x 2¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ 2¹⁄₂ x 2¹⁄₂ x 1¹⁄₄ x 1 2¹⁄₂ x 2¹⁄₂ x 1 x 1 2¹⁄₂ x 2 x 2 x 2 2¹⁄₂ x 2 x 1¹⁄₂ x 1¹⁄₂ 2¹⁄₂ x 2 x 1 x 1 3x3x2x2 3 x 3 x 1¹⁄₂ x 1¹⁄₂ 4x4x2x2
$35.22 $41.94 $49.88 $58.38 $79.57 $58.38 $67.78 $74.79 $68.29 $67.00 $128.26 $128.26 $100.70 $179.48 $184.63 $200.37 $200.37 $184.63 $200.37 $200.37 $200.37 $317.34 $317.34 $548.27
-
Screwed Hex Coupling Fig. 366 1
$11.03
-
60
82.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
SIZE
STANDARD SCREWED CAST IRON FITTINGS Flanged Union Gasket Type Fig. 487 $69.39 $91.52 $88.68 $104.89 $96.79 $113.92 $154.26 $174.50 $296.05 $237.29 $553.03 $519.14 s $1,154.19
1⁄₂ ³⁄₄ 1 11⁄₄ 11⁄₂ 2 21⁄₂ 3 31⁄₂ 4 5 6 8
$167.73 s $203.16 $203.16 s $254.40 s $296.88 $305.53 $459.89 $609.68 $808.87 $1,095.25 $2,709.86
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
$14.46 $9.80 $7.40 $25.40 $21.71 $28.39 $35.95 $35.95 $40.16 $44.62 $47.02 $49.12 $41.88 $47.02 $52.21 $66.82 $74.32 $103.07 $81.89 $112.56 $211.26 $211.26 $211.26 $289.71 $334.96 $382.89 $1,667.79
-
175.00 200.00 225.00 475.00 500.00 650.00 850.00 1100.00 1275.00 1800.00 2200.00 3000.00 5100.00
BULK 70 80 BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
40.00 63.00 54.00 107.00 90.00 84.00 145.00 150.00 120.00 100.00 198.00 178.00 183.00 190.00 200.00 298.00 310.00 440.00 396.00 431.00 701.00 778.00 650.00 1048.00 1553.00 1383.00 2910.00
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
45.00 61.00 57.00 100.00 100.00 90.00 126.00 121.00 117.00 111.00 193.00 187.00
Eccentric Reducer Fig. 368 $30.42 $32.85 $31.93 $52.50 $48.93 $47.57 $66.34 $69.39 $69.39 $66.08 $87.99 $86.25
³⁄₄ x ¹⁄₂ 1 x ³⁄₄ 1 x ¹⁄₂ 1¹⁄₄ x ¹⁄₂ 1¹⁄₄ x 1 1¹⁄₄ x ³⁄₄ 1¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x 1 1¹⁄₂ x ³⁄₄ 1¹⁄₂ x ¹⁄₂ 2 x 1¹⁄₂ 2 x 1¹⁄₄
-
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Eccentric Reducer Fig. 368 (Continued)
Concentric Reducer Fig. 367 ³⁄₄ x ¹⁄₂ 1 x ³⁄₄ (Hex) ®BLK 1 x ¹⁄₂ (Hex) ®BLK 1¹⁄₄ x 1 1¹⁄₄ x ³⁄₄ 1¹⁄₄ x ¹⁄₂ 1¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x 1 1¹⁄₂ x ³⁄₄ 1¹⁄₂ x ¹⁄₂ 2 x 1¹⁄₂ 2 x 1¹⁄₄ 2x1 2 x ³⁄₄ 2 x ¹⁄₂ 2 ¹⁄₂ x 2 2¹⁄₂ x 1¹⁄₂ 3 x 2¹⁄₂ 3x2 3 x ³⁄₄ 4x3 4 x 2¹⁄₂ 4x2 5x4 6x5 6x4 8x6
ORDER QTY.
$90.56 $97.22 $86.25 $130.65 $133.77 $133.77 $133.77 $194.67 $161.98 $179.97 $211.26 $211.26 $293.45 $381.12 $381.12 $381.12 $354.54 $381.12 $466.23 $433.69 $433.69 $591.10 $591.10
2x1 2 x ³⁄₄ 2 x ¹⁄₂ 2 ¹⁄₂ x 2 2¹⁄₂ x 1¹⁄₂ 2¹⁄₂ x 1¹⁄₄ 2¹⁄₂ x 1 3 x 2¹⁄₂ 3x2 3 x 1¹⁄₂ 3 x 1¹⁄₄ 3x1 3¹⁄₂ x 2 4x3 4 x 2¹⁄₂ 4x2 4 x 1¹⁄₂ 4 x 1¹⁄₄ 5x4 5x3 5 x 2¹⁄₂ 6x4 6x3
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
186.00 183.00 180.00 295.00 294.00 280.00 274.00 480.00 461.00 416.00 380.00 395.00 523.00 764.00 726.00 691.00 661.00 658.00 1119.00 1144.00 1138.00 1536.00 1466.00
25 25 25 25 25 15 15 15 15 15 15 BULK 20 BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK 20
50.00 47.00 42.00 47.00 47.00 81.00 73.00 71.00 70.00 75.00 75.00 129.00 124.00 116.00 125.00 128.00 163.00 190.00 179.00 177.00 190.00 192.00 193.00 196.00 323.00 254.00 265.00 256.00 242.00 250.00 315.00 329.00 311.00
Hex Bushing Fig. 383 1¹⁄₂ x 1 1¹⁄₂ x ³⁄₄ 1¹⁄₂ x ¹⁄₂ 1¹⁄₂ x ³⁄₈ 1¹⁄₂ x ¹⁄₄ 2 x 1¹⁄₄ 2x1 2 x ³⁄₄ 2 x ¹⁄₂ 2 x ³⁄₈ 2 x ¹⁄₄ 2¹⁄₂ x 1¹⁄₂ 2¹⁄₂ x 1¹⁄₄ 2¹⁄₂ x 1 2¹⁄₂ x ³⁄₄ 2¹⁄₂ x ¹⁄₂ 3 x 2¹⁄₂ 3x2 3 x 1¹⁄₂ 3 x 1¹⁄₄ 3x1 3 x ³⁄₄ 3 x ¹⁄₂ 3¹⁄₂ x 3 3¹⁄₂ x 2¹⁄₂ 3¹⁄₂ x 2 3¹⁄₂ x 1¹⁄₂ 3¹⁄₂ x 1¹⁄₄ 3¹⁄₂ x 1 4 x 3¹⁄₂ 4x3 4 x 2¹⁄₂ 4x2
®BLK ®BLK
®BLK ®BLK
$7.08 $8.06 $8.06 $12.03 $10.60 $9.67 $9.67 $10.13 $12.80 $14.40 $11.43 $15.50 $17.82 $17.82 $17.82 $16.61 $20.85 $17.98 $24.08 $24.08 $24.08 $26.15 $26.80 $42.21 $46.87 $45.76 $46.87 $46.87 $46.87 $54.55 $40.56 $49.08 $40.56
$14.68 $16.23 $16.23 $20.89 $20.89 $18.93 $18.93 $18.93 $20.37 $24.22 $23.66 $31.02 $34.46 $34.46 $34.46 $34.46 $37.96 s $35.35 $40.91 $44.41 $45.46 $45.46 $45.46 $80.74 $80.74 $80.74 $80.74 $73.69 $73.69 $95.29 $74.23 $95.29 $74.23
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
SIZE
STANDARD SCREWED CAST IRON FITTINGS Hex Bushing Fig. 383 (Continued) 4 x 1¹⁄₂ 4 x 1¹⁄₄ 4x1 5x4 5 x 3¹⁄₂ 5x3 5 x 2¹⁄₂ 5x2 6x5 6x4 6x3 6 x 2¹⁄₂ 6x2 8x6 8x5 8x4 8x3 10 x 8 10 x 6
$50.24 $54.55 $54.55 $82.58 $86.26 $85.03 $94.51 $94.51 $97.49 $84.40 $97.50 $108.36 $97.50 $183.72 $189.85 $204.09 $244.10 $752.79 $745.64
$53.08 s$100.99 $92.17
$95.29 $95.29 $95.29 $157.32 $161.09 $147.05 $161.09 $182.25 $171.93 $182.25 $182.25 $317.69 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
344.00 354.00 359.00 394.00 400.00 483.00 487.00 512.00 524.00 683.00 775.00 772.00 800.00 1319.00 1365.00 1393.00 1550.00 2200.00 2450.00
-
BULK BULK BULK
1330.00 1920.00 255.00
Square Head Plugs, Cored Fig. 387 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4
®BLK ®BLK ®BLK ®BLK
$2.59 $2.59 $4.14 $5.87 $6.84 $16.66 $19.30 $47.09 $39.01
®GALV ®GALV ®GALV
$5.55 $5.55 $9.26 $12.52 $15.54 $32.85 $42.08 $76.83 $112.28
120 60 30 25 15 10 BULK BULK BULK
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
STANDARD SCREWED CAST IRON FITTINGS Bar Plugs, Cored Fig. 389
Face Bushing Fig. 385 3x2 4x3 4 x 2¹⁄₂
ORDER QTY.
13.00 25.00 39.00 50.00 82.00 132.00 187.00 250.00 400.00
$39.76 $74.74 $97.57 $212.97
4 5 6 8
$81.60 $162.23 $184.55 $416.03
BULK BULK BULK BULK
382.00 650.00 994.00 2026.00
BULK BULK BULK
568.00 960.00 1478.00
Bar Plugs, Solid Fig. 380 4 5 6
$87.50 s $162.62 $194.30
-
Counter Sunk Plugs Fig. 390 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4
$8.96 $9.37 $11.22 $16.54 $26.15 $42.73 $74.09 $115.17
$17.62 $18.63 $25.03 $35.05 -
60 30 25 15 10 BULK BULK BULK
20.00 32.00 47.00 84.00 140.00 225.00 302.00 376.00
$44.30 $58.28 $83.83 $127.65 $159.91 $440.86
$633.49 $861.87
BULK BULK BULK BULK BULK BULK
255.00 410.00 640.00 1070.00 1420.00 2723.00
-
BULK BULK BULK
113.00 160.00 110.00
Cap Fig. 381 21⁄2 3 4 5 6 8
Locknut Fig. 370 Square Head Plugs, Solid Fig. 388 $2.29 $6.94 ®BLK $7.40 $8.52 $12.08 $15.59 $23.06 $39.34 $90.42
1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2
$5.14 $14.71 $16.67 $18.16 $24.22 $34.52 $44.43 $78.36 -
150 120 60 30 25 15 10 BULK BULK
10.00 17.00 32.00 53.00 76.00 123.00 200.00 318.00 438.00
21⁄2 3 4
$29.06 $38.03 $57.64
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
SIZE
STANDARD SCREWED CAST IRON FITTINGS Floor Flange Fig. 1190 (Ductile Iron) 1⁄4 3⁄8* 1⁄2 3⁄4 1 11⁄4 11⁄2 2
ORDER QTY.
X.H. 90° Elbow Fig. 421 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
$36.56 $35.31 $42.38 $69.84 $76.84 $109.27 $188.69
SIZE
$42.20 $42.20 $40.47 $40.42 $48.81 $72.79 $93.66 $116.20 $247.96 $338.17 $657.98
$72.03 $73.18 $85.91 $114.24 $97.33 $144.56 $144.56 $144.56 $196.57 $196.57 $167.44 $159.44
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
137.00 219.00 203.00 349.00 321.00 498.00 426.00 402.00 769.00 711.00 657.00 624.00
List Price ORDER UNFINISHED ORDER QTY. $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
-
191.00 304.00 709.00 1369.00
90° Short Turn Elbow Fig. 701* 11⁄2 2 3 4
$31.08 $46.79 $175.78 $278.37
$46.05 $66.55 $263.04 $511.91
90° Reducing Short Turn Elbow Fig. 701R* -
BULK BULK BULK BULK BULK BULK BULK
66.00 104.00 156.00 270.00 355.00 607.00 979.00
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
47.00 70.00 120.00 157.00 243.00 394.00 531.00 901.00 1423.00 2095.00 3398.00
1¹⁄₂ x 1¹⁄₄ 2 x 1¹⁄₂
X.H. Tee Fig. 425 1⁄4 3⁄8 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 4
WGT PER 100
CAST IRON DRAINAGE
37.00 75.00 113.00 179.00 300.00 405.00 676.00 1056.00 1525.00 2615.00
X.H. 45° Elbow Fig. 424 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2
QTY. CARTON EACH
X.H. Reducing Tee Fig. 426 ³⁄₄ x ³⁄₄ x ¹⁄₂ 1 x 1 x ³⁄₄ 1 x 1 x ¹⁄₂ 1¹⁄₄ x 1¹⁄₄ x 1 1¹⁄₄ x 1¹⁄₄ x ³⁄₄ 1¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ 1¹⁄₂ x 1¹⁄₂ x 1 1¹⁄₂ x 1¹⁄₂ x ³⁄₄ 2 x 2 x 1¹⁄₂ 2 x 2 x 1¹⁄₄ 2x2x1 2 x 2 x ³⁄₄
STANDARD SCREWED CAST IRON FITTINGS X.H. STANDARD SCREWED C.I. FITTINGS $28.63 $25.65 $27.11 $32.80 $48.81 $60.57 $74.74 $174.78 $230.86 $483.52
GALV. $/EA.
STANDARD SCREWED CAST IRON FITTINGS X.H. STANDARD SCREWED C.I. FITTINGS
See Malleable Price Sheet Page 5 for List Price
1⁄4 1⁄2 3⁄4 1 11⁄4 11⁄2 2 21⁄2 3 4
List Price BLACK ORDER $/EA. QTY.
$54.46 $63.57
-
-
169.00 249.00
-
224.00 361.00 904.00 1640.00
90° Long Turn Elbow Fig. 702* 11⁄2 2 3 4
$43.48 $64.74 $236.13 $392.14
$52.36 $89.89 -
90° Extra Long Turn Elbow Fig. 702A* 11⁄2 2
$56.15 $97.10
-
-
262.00 454.00
-
234.00
60° Short Turn Elbow Fig. 703 11⁄2
$56.25
-
Weights are Weights for black are for fittings black| For or unfinished galvanized,fittings add 100% | Fortogalvanized, the black list addprice 100% unless to thetheblack galvanized list pricelist unless pricethe is listed galvanized | s Extended list price lead is listed times |s and/or Extended minimum lead times order quantities and/or minimum | q -order Sold inquantities box only, blk/galv q - Sold in box only, blk/galv | * Tapped pitched ¹⁄₄” to foot.
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 List Price ORDER UNFINISHED ORDER QTY. $/EA. QTY.
SIZE
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
SIZE
CAST IRON DRAINAGE $30.38 $43.85 $171.74 $268.45
$45.52 $65.14 $226.68 $370.40
-
171.00 279.00 631.00 1144.00
45° Long Turn Elbow Fig. 706 $42.68
11⁄2
$51.81
-
214.00
$49.37 $73.83
-
165.00 308.00
-
-
181.00 269.00
221/2° Elbow Fig. 707 $38.28 $51.01
11⁄2 2
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
-
416.00 433.00
-
-
582.00
$211.14
-
443.00 669.00
-
-
523.00
$77.72 $155.81 $537.32 $847.69
-
403.00 556.00 1200.00 2451.00
-
483.00 2063.00
-
-
509.00
$99.49
-
175.00
-
404.00 540.00 2000.00
CAST IRON DRAINAGE
45° Short Turn Elbow Fig. 705 11⁄2 2 3 4
List Price ORDER UNFINISHED ORDER QTY. $/EA. QTY.
90° Reducing Short Turn Y-Branch Tee Pattern Fig. 727* 2 x 2 x 1¹⁄₂ 2 x 1¹⁄₂ x 1¹⁄₂
$84.97 $84.97
-
90° Reducing Short Turn Y-Branch Tee Pattern Fig. 729* 2 x 1¹⁄₂
$126.25
90° Long Turn Y-Branch Tee Pattern Fig. 730* 11⁄2 2
$83.79 $130.65
111/4° Elbow Fig. 708 $40.75 $73.79
11⁄2 2
90° Reducing Long Turn Y-Branch Tee Pattern Fig. 731* 2 x 2 x 1¹⁄₂
$137.13
90° Street Elbow Fig. 718* $44.30 s $58.65
11⁄2 2
$58.32 $91.38
-
205.00 310.00
11⁄2 2 3 4
45° Street Elbow Fig. 719 $41.38 $66.97
11⁄2 2
45° Y-Branch Fig. 734
$60.35 $92.87
-
$61.41 $114.52 $384.14 $589.38
164.00 267.00
45° Reducing Y-Branch Fig. 735 Tee Fig. 722* $51.05 $84.42
11⁄2 2
$69.23 $115.86
-
259.00 466.00
2 x 2 x 1¹⁄₂ 4x4x3
$113.23 $615.47
$167.62 -
45° Double Y-Branch Fig. 736 11⁄2
Reducing Tee Fig. 723* $96.11
2 x 2 x 1¹⁄₂
-
-
$148.88
377.00
Coupling Fig. 753 11⁄2
90° Short Turn Y-Branch Tee Pattern Fig. 726* $50.14 $82.64 $295.58 $450.88
11⁄2 2 3 4
$70.07 $114.51 $444.01 $552.76
-
309.00 508.00 1177.00 2125.00
$103.65
Tucker Connection Fig. 744 11⁄2 2 4
$85.63 $105.35 $421.57
-
Weights are for black or unfinished fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities q - Sold in box only, blk/galv | * Tapped pitched ¹⁄₄” to foot.
Revised:
www.anvilintl.com
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ListPrice Price List ORDER UNFINISHED ORDER ORDER BLACK ORDER QTY. $/EA. QTY. QTY. $/EA. QTY.
SIZE SIZE
GALV. GALV. $/EA. $/EA.
QTY.CARTON CARTON WGT WGT QTY. EACH PER100 100 EACH PER
CAST IRON DRAINAGE P-Trap Fig. 752 $91.24 $146.07 $459.08 $1,098.73
11⁄2 2 3 4
SIZE SIZE
CAST IRON FLANGED, STANDARD* 90° Reducing Flanged Elbow Fig. 803 (Continued)
$125.70 $220.01 $675.87 $1,663.80
-
469.00 718.00 1687.00 3057.00
-
-
387.00 625.00
Bath P-Trap Fig. 754 $93.87 $150.25
11⁄2 2
List Price Quantity List Price ORDER ORDER BLACKBLACKORDERORDERGALV. GALV.MSTR. QTY.CARTON CARTON WGT WGT QTY.QTY. $/EA.$/EA. QTY. QTY. $/EA. $/EA.EACH EACH PER EACH PER100 100
CAST IRON FLANGED, STANDARD
4 x 2¹⁄₂ 4x2 5x4 5x3 6x5 6x4 6x3 8x6 8x5 8x4 10 x 8 10 x 6 12 x 10 12 x 8 12 x 6
$1,029.96 $1,029.96 $1,320.24 $1,393.27 $1,419.75 $835.69 $1,484.27 $1,219.29 $2,172.05 $1,644.20 $2,321.58 $3,391.25 $4,448.88 $5,879.04 $6,204.27
-
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
3100.00 2900.00 4800.00 4000.00 6000.00 5600.00 4700.00 9000.00 8200.00 7700.00 17300.00 12500.00 22000.00 19000.00 16500.00
BULK BULK BULK BULK BULK BULK BULK BULK BULK
1600.00 2300.00 2800.00 4800.00 6200.00 8500.00 14500.00 23000.00 35000.00
BULK BULK BULK BULK BULK BULK
4600.00 5800.00 8100.00 7800.00 13000.00 20500.00
STD. 125# - Faced Only, Faced & Drilled*
SIZE
ORDER QTY.
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
Quantity MSTR. CARTON EACH EACH
90° Long Radius Elbow Fig. 804 WGT PER 100
90° Flanged Elbow Fig. 801 $446.08 $272.05 $294.28 $245.62 s $682.66 $303.77 $719.43 s $475.60 $821.24 $1,799.89 $3,623.29
11⁄2 2 21⁄2 3 31⁄2 4 5 6 8 10 12
$564.56 $772.28 $761.31 $694.06 $1,462.86 $1,117.43 $1,740.57 $3,220.89 $5,374.58
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
900.00 1400.00 1900.00 2400.00 3100.00 4100.00 5200.00 6800.00 11000.00 17500.00 25000.00
45° Flanged Elbow Fig. 802 s $538.63 $394.19 $420.46 $408.86 $460.20 $1,102.73 $752.37 $1,100.21 $2,324.76 $3,552.25
11⁄2 2 21⁄2 3 4 5 6 8 10 12
$807.67 $1,002.09 $1,397.86 $2,096.58 $4,012.63 $6,128.90
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
800.00 1200.00 1700.00 2000.00 3600.00 4500.00 6000.00 9400.00 14500.00 22000.00
90° Reducing Flanged Elbow Fig. 803 $865.27 $909.98 $834.18 $673.89
2¹⁄₂ x 2 3 x 2¹⁄₂ 3x2 4x3
-
BULK BULK BULK BULK
2 21⁄2 3 4 5 6 8 10 12
$732.62 $765.99 $791.40 $725.80 $1,379.47 $1,049.83 $2,017.90 $3,141.28 $6,472.76
-
90° Flanged Long Radius Reducing Elbow Fig. 804R 4x3 5x4 6x5 6x4 8x6 10 x 8
$1,727.59 $1,947.49 $2,391.44 $2,254.92 $4,168.04 $6,930.81
-
90° Flanged Base Elbow Fig. 805 3 4 6 8 10 12
$1,234.01 $1,180.33 $2,011.01 $2,665.10 $4,474.75 $6,162.43
-
BULK BULK BULK BULK BULK BULK
3600.00 5900.00 11000.00 15800.00 22400.00 32400.00
90° Flanged Side Outlet Elbow Fig. 808
1800.00 2200.00 1900.00 3300.00
4 6 8
$3,808.53 $4,891.55 $6,118.40
-
BULK BULK BULK
5900.00 9600.00 15000.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or and or minimum order quantities | q - Sold in box only, blk/galv * Faced only, not stocked. Galvanized fittings not stocked in all types and sizes, but may be produced to order.
Revised:
www.anvilintl.com
10
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08 ORDER QTY.
SIZE
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
CAST IRON FLANGED, STANDARD* Flanged Tee Fig. 811 $512.88 $297.88 $433.86 $304.07 $462.53 $1,239.02 $671.19 $1,146.71 $3,085.47 $4,846.98
11⁄2 2 21⁄2 3 4 5 6 8 10 12
$532.67 $719.21 $722.13 $1,143.22 $1,571.88 $2,478.19 $4,703.63 $7,185.38
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
SIZE
ORDER QTY.
List Price BLACK ORDER $/EA. QTY.
GALV. $/EA.
QTY. CARTON EACH
WGT PER 100
CAST IRON FLANGED, STANDARD* Flanged Cross Fig. 821 1500.00 2100.00 3000.00 3700.00 6400.00 8100.00 10500.00 16500.00 27000.00 38000.00
2 21⁄2 3 4 6 8 10
$940.18 $864.50 $907.75 $1,185.72 $2,483.25 $3,999.42 $4,744.44
-
BULK BULK BULK BULK BULK BULK BULK
2800.00 3900.00 4800.00 8200.00 13500.00 21000.00 33000.00
-
BULK BULK BULK BULK BULK BULK BULK
2500.00 3600.00 4400.00 7500.00 9600.00 12500.00 21000.00
Flanged Lateral Fig. 823 Flanged Reducing Tee Fig. 812 3 x 3 x 2¹⁄₂ 3x3x2 3 x 3 x 1¹⁄₂ 3x2x3 4x4x3 4 x 4 x 2¹⁄₂ 4x4x2 4x3x4 4x3x3 4 x 2¹⁄₂ x 4 4x2x4 3x3x4 5x5x4 5x5x3 6x6x5 6x6x4 6x6x3 6 x 6 x 2¹⁄₂ 6x6x2 6x5x4 6x4x6 6x4x4 6x3x6 4x4x6 8x8x6 8x8x4 8x8x3 8x6x8 8x6x6 8x6x4 8x4x8 8x4x6 6x6x8 10 x 10 x 8 10 x 10 x 6 10 x 10 x 4 10 x 8 x 10 10 x 8 x 8 10 x 8 x 6 12 x 12 x 10 12 x 12 x 8 12 x 12 x 6 12 x 8 x 12 12 x 8 x 8
$902.63 $706.57 $947.77 $906.53 $952.01 s $1,039.67 $952.01 $2,276.57 $2,322.14 $1,333.83 $2,168.16 $1,270.30 $2,001.39 $2,001.39 $1,783.85 $916.48 $1,333.23 $1,783.85 $1,873.05 $2,759.83 $1,055.94 $1,167.11 $2,714.94 $1,787.80 $1,431.69 $1,720.39 $3,188.20 $2,273.38 $1,720.66 $2,916.97 $2,952.40 $3,047.40 $2,273.38 $3,272.82 $3,806.24 $3,717.08 $5,032.15 $3,617.30 $5,032.15 $5,664.86 $5,746.69 $4,856.88 $7,597.88 $7,597.88
$2,070.44 $3,169.47 s $3,230.79 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
3500.00 3400.00 3200.00 3300.00 5700.00 5600.00 5100.00 5900.00 5300.00 5600.00 5000.00 5600.00 8000.00 7100.00 10500.00 9700.00 9200.00 9000.00 8600.00 9100.00 9400.00 8800.00 9100.00 8800.00 15600.00 14300.00 14000.00 15900.00 14400.00 12500.00 14600.00 14000.00 14200.00 26200.00 24000.00 22500.00 26200.00 23200.00 22000.00 36200.00 33000.00 32300.00 34000.00 29800.00
2 21⁄2 3 4 5 6 8
$1,074.37 $1,216.17 $1,300.94 $1,698.25 $2,564.63 $2,583.63 $4,233.44
Flanged Concentric Reducer Fig. 825 2 x 1¹⁄₂ 2¹⁄₂ x 2 2¹⁄₂ x 1¹⁄₂ 3 x 2¹⁄₂ 3x2 3 x 1¹⁄₂ 4x3 4 x 2¹⁄₂ 4x2 5x4 5x3 5 x 2¹⁄₂ 6x5 6x4 6x3 6 x 2¹⁄₂ 6x2 8x6 8x5 8x4 10 x 8 10 x 6 10 x 5 10 x 4 12 x 10 12 x 8 12 x 6
$854.80 $686.61 $854.80 $545.09 $545.09 $872.08 $612.45 $658.79 $728.12 $947.02 $1,077.21 $1,469.74 $900.97 $820.20 $944.21 $1,245.67 $1,647.02 $1,032.26 $1,869.17 $1,189.12 $2,128.84 $2,318.70 $3,801.62 $3,801.62 $3,671.91 $4,058.48 $4,243.40
$893.87 $1,087.18 $1,290.68 s $1,290.68 $1,584.02 $1,833.92 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
1200.00 1400.00 1200.00 1900.00 1600.00 1400.00 2800.00 2600.00 2400.00 3900.00 3200.00 3100.00 5000.00 4700.00 3900.00 3700.00 3400.00 7700.00 7100.00 6600.00 12000.00 10000.00 9000.00 8500.00 18000.00 15500.00 14000.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv * Faced only, not stocked. Galvanized fittings not stocked in all types and sizes, but may be produced to order.
Revised:
www.anvilintl.com
11
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08
SIZE SIZE
List Price List Price Quantity ORDER ORDER BLACKBLACKORDERORDERGALV. GALV. MSTR. QTY.CARTON CARTON WGT WGT QTY.QTY. $/EA.$/EA. QTY. QTY. $/EA. $/EA.EACH EACH EACH PER PER100 100
CAST IRON FLANGED, STANDARD* Flanged Eccentric Reducer Fig. 826 $834.18 $822.26 $994.06 $1,114.54 $1,148.66 $1,469.91 $938.93 $938.93 $1,567.25 $1,189.36 $1,542.80 $1,612.89 $3,029.62 $3,553.47 $4,106.64 $4,253.30
3x2 3 x 2¹⁄₂ 4x3 4 x 2¹⁄₂ 4x2 5x4 6x5 6x4 6x3 8x6 8x5 8x4 10 x 8 10 x 6 12 x 10 12 x 8
$1,764.26 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
SIZE SIZE
CAST IRON FLANGED FITTINGS X.H. Flanged Concentric Reducer Fig. 855 (Cont.) 2200.00 1600.00 2800.00 2800.00 2800.00 3900.00 5100.00 5000.00 4700.00 7700.00 7600.00 7100.00 12000.00 10700.00 18000.00 15500.00
CAST IRON FLANGED FITTINGS EXTRA HEAVY 250 LBS. FACED ONLY, FACED & DRILLED* X.H. 90° Flanged Elbow Fig. 831 $698.01 $758.83 $772.51 $1,111.62 $1,593.52 $2,608.92
2 21⁄2 3 4 6 8
-
BULK BULK BULK BULK BULK BULK
2000.00 3000.00 4000.00 6500.00 11500.00 18500.00
BULK BULK BULK BULK BULK
4600.00 5800.00 9900.00 18000.00 28000.00
$987.80 $1,106.16 $1,753.62 $2,595.33 $4,381.06
-
X.H. Flanged Reducing Tees Fig. 842 $3,558.77 $5,444.30
6x6x4 8x8x6
-
BULK BULK
16000.00 25700.00
X.H. Flanged Concentric Reducer Fig. 855 $1,325.33 $1,325.33 $1,794.88 $1,794.88 $2,504.99
3 x 2¹⁄₂ 3x2 4x3 4 x 2¹⁄₂ 6x5
-
6x4 6x3 8x6 8x4 10 x 8 10 x 6
$2,517.66 $2,504.99 $3,415.57 $3,415.57 $6,042.49 $6,042.49
-
BULK BULK BULK BULK BULK BULK
7700.00 6700.00 13000.00 10500.00 19000.00 17000.00
IRON FLANGES, STANDARD Cast Iron Companion Flange Fig. 1011 ³⁄₄ x 3⁷⁄₈ 1 x 4¹⁄₄ 1¹⁄₄ x 4⁵⁄₈ 1¹⁄₂ x 5 2x6 2¹⁄₂ x 7 3 x 7¹⁄₂ 3¹⁄₂ x 8¹⁄₂ 4x9 5 x 10 6 x 11 8 x 13¹⁄₂ 10 x 16 12 x 19
$59.01 $39.69 $47.48 $43.90 s $43.81 $51.24 $66.00 $92.48 $88.94 s $125.65 $142.18 $224.41 $397.72 $851.06
$109.74 $89.84 $103.15 $105.53 $92.80 $108.57 $131.93 $179.70 $282.12 $301.53 $523.59 $788.61 $1,566.85
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
150.00 175.00 200.00 225.00 400.00 600.00 763.00 900.00 1175.00 1400.00 1650.00 2600.00 3775.00 5050.00
Cast Iron Reducing Flange Fig. 1016
X.H. Flanged Tee Fig. 841 21⁄2 3 4 6 8
List Price Quantity List Price ORDER ORDER BLACKBLACKORDERORDERGALV. GALV.MSTR. QTY.CARTON CARTON WGT WGT QTY.QTY. $/EA.$/EA. QTY. QTY. $/EA. $/EA.EACH EACH PER EACH PER100 100
BULK BULK BULK BULK BULK
2900.00 2500.00 4400.00 4000.00 8500.00
1x5 1x6 1¹⁄₄ x 5 1¹⁄₄ x 6 1¹⁄₂ x 6 1¹⁄₂ x 7 2x7 1 x 7¹⁄₂ 1¹⁄₂ x 7¹⁄₂ 2 x 7¹⁄₂ 2¹⁄₂ x 7¹⁄₂ 3 x 8¹⁄₂ 1¹⁄₂ x 9 2x9 2¹⁄₂ x 9 3x9 3¹⁄₂ x 9 3 x 10 4 x 10 1¹⁄₂ x 11 2 x 11 2¹⁄₂ x 11 3 x 11 4 x 11
$117.30 $111.16 $111.80 $107.13 $91.70 $118.24 $85.79 $169.25 $141.75 $114.39 $122.76 $222.99 $209.37 $155.46 $166.82 s $155.46 $188.57 $287.40 $240.57 $368.53 $284.32 $337.81 $284.32 $234.49
s $181.15 $184.84 $199.63 $280.68 $268.96 $280.68 $355.57 $376.82 $355.57 $376.82 $449.30 $483.01 $566.94 $608.30 $566.94 $561.38
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
275.00 250.00 500.00 475.00 450.00 700.00 675.00 900.00 875.00 850.00 800.00 1000.00 1400.00 1400.00 1350.00 1275.00 1200.00 1700.00 1600.00 2700.00 2600.00 2500.00 2300.00 2100.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or and or minimum order quantities | q - Sold in box only, blk/galv * Faced only, not stocked. Galvanized fittings not stocked in all types and sizes, but may be produced to order.
Revised:
www.anvilintl.com
12
CAST IRON FITTINGS PriceList
Effective Date: March 3, 2008 | Replaces Prior Date: June 2007 | Sheet # PF-C.I. 3.08
SIZE SIZE
List Price List Price Quantity ORDER ORDER BLACKBLACKORDERORDERGALV. GALV. MSTR. QTY.CARTON CARTON WGT WGT QTY.QTY. $/EA.$/EA. QTY. QTY. $/EA. $/EA.EACH EACH EACH PER PER100 100
IRON FLANGES, STANDARD Cast Iron Reducing Flange Fig. 1016 (Continued) $297.19 $521.12 $521.12 s $401.34 $563.31 $363.83 $1,026.46 $972.39 $1,115.42 $1,193.87
5 x 11 2 x 13¹⁄₂ 3 x 13¹⁄₂ 4 x 13¹⁄₂ 5 x 13¹⁄₂ 6 x 13¹⁄₂ 6 x 16 8 x 16 6 x 19 8 x 19
$566.94 $934.13 $832.93 $895.20 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
SIZE SIZE
IRON FLANGES, EXTRA HEAVY X.H. Cast Iron Blind Flange Fig. 1021 1900.00 4400.00 4000.00 3700.00 3400.00 3100.00 5300.00 5000.00 8800.00 8100.00
1¹⁄₂ x 6¹⁄₈ 2 x 6¹⁄₂ 2¹⁄₂ x 7¹⁄₂ 3 x 8¹⁄₄ 4 x 10 5 x 11 6 x 12¹⁄₂ 8 x 15
Cast Iron Blind Flange Fig. 1018 $63.17 $66.76 $70.87 $80.05 $88.00 $105.46 $155.78 $135.08 $219.47 $238.77 $374.61 $554.19 $1,010.91
1 x 4¹⁄₄ 1¹⁄₄ x 4⁵⁄₈ 1¹⁄₂ x 5 2x6 2¹⁄₂ x 7 3 x 7¹⁄₂ 3¹⁄₂ x 8¹⁄₂ 4x9 5 x 10 6 x 11 8 x 13¹⁄₂ 10 x 16 12 x 19
$108.22 $118.22 $125.38 $182.50 $255.42 $417.01 $442.70 $585.27 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK BULK
200.00 225.00 375.00 400.00 675.00 800.00 1100.00 1400.00 1800.00 2300.00 4000.00 5900.00 8800.00
$278.27 $333.67 $397.17 $537.45 -
BULK BULK BULK BULK BULK BULK BULK BULK BULK
375.00 575.00 650.00 950.00 1233.00 2000.00 2400.00 3200.00 5100.00
X.H. Cast Iron Reducing Flange Fig. 1030 $387.24 $387.01 $561.04 $438.76 $837.46
2 x 8¹⁄₄ 2¹⁄₂ x 8¹⁄₄ 3 x 10 4 x 11 4 x 12¹⁄₂
-
-
BULK BULK BULK BULK BULK BULK BULK BULK
525.00 700.00 1100.00 1400.00 2300.00 3100.00 4200.00 7000.00
HIGH HUB FLANGES FOR C.I. PIPE Cast Iron Flanges for Cast Iron Pipe Fig. 1010T 3 x 7¹⁄₂ 4x9 6 x 11 8 x 13¹⁄₂ 10 x 16 12 x 19
2x6 2¹⁄₂ x 7 3 x 7¹⁄₂ 4x9 6 x 11
X.H. Cast Iron Companion Flange Fig. 1025 $135.93 $159.58 $121.46 $174.74 $190.00 $308.47 $413.65 $506.51 $858.19
$175.97 $202.40 $234.06 $268.61 $392.54 $518.58 $676.05 $1,089.27
$141.11 $148.43 $209.46 $349.41 $595.19 $808.15
-
BULK BULK BULK BULK BULK BULK
750.00 1300.00 1720.00 2900.00 4200.00 6000.00
MALLEABLE IRON FLANGES 125 LB. STANDARD MALLEABLE IRON Companion Flanges Fig. 1035
IRON FLANGES, EXTRA HEAVY
1¹⁄₄ x 5¹⁄₄ 1¹⁄₂ x 6¹⁄₈ 2 x 6¹⁄₂ 2¹⁄₂ x 7¹⁄₂ 3 x 8¹⁄₄ 4 x 10 5 x 11 6 x 12¹⁄₂ 8 x 15
List Price Quantity List Price ORDER ORDER BLACKBLACKORDERORDERGALV. GALV.MSTR. QTY.CARTON CARTON WGT WGT QTY.QTY. $/EA.$/EA. QTY. QTY. $/EA. $/EA.EACH EACH PER EACH PER100 100
BULK BULK BULK BULK BULK
-
$194.85 $273.88 $338.43 $545.74 $737.59
BULK BULK BULK BULK BULK
400.00 600.00 763.00 1175.00 1650.00
SAFETY VALVE DISCHARGE ELBOWS Screwed Cast Iron Fig. 1538 21⁄2 3 4 6
$1,056.90 $1,134.71 $1,530.67 $1,599.43
-
BULK BULK BULK BULK
1200.00 1500.00 2700.00 5300.00
1425.00 1350.00 2275.00 3000.00 3950.00
Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv
Revised:
www.anvilintl.com
13
– Notes –
– Notes –
Corporate Offices
Anvil International Worldwide Customer Service Center
110 Corporate Drive, Suite 10 P.O. Box 3180 Portsmouth, NH 03802-3180
Tel: 708-534-1414 Fax: 708-534-5441
Tel: 603-422-8000 Fax: 603-422-8033 E-mail: [email protected]
U.S. R EgIONAl SER vICE C ENtERS
CANAd A SE RvICE CEN tERS
IN tERNA tIONAl SAlES
Eastern Region
Corporate
Europe & Middle East Region
Servicing: Connecticut, Delaware, Florida, Georgia, Maine, Maryland, Massachusetts, New Hampshire, New Jersey, New York, North and South Carolina, East Pennsylvania, Rhode Island, Vermont, Virginia
390 Second Avenue
Rick van Meesen, Director of Sales
Simcoe, Ontario N3Y 4K9
The Netherlands Tel: +31-53-5725570 Fax: +31-53-5725579
800 Malleable Road Columbia, PA 17512
Western
Tel: 800-451-2935 Fax: 800-272-2983 Toll-Free: 1-800-301-2701
5506-48 St. NW
Northern Region
Central
Tel: (519) 426-4551
U.S. Customer Service Tel: +1-708-534-1414 Fax: +1-708-534-5441
Edmonton, Alberta, T6B 2Z1
latin America
Tel: (780) 413-8274
Servicing: Illinois, Indiana, Iowa, Kentucky, Michigan, Minnesota, Nebraska, North and South Dakota, Ohio, West Pennsylvania, West Virginia, Wisconsin
Abraham Quijada, Sales Manager Tel: +1-281-590-4600
390 Second Avenue Tel: (519) 426-4551
U.S. Customer Service Tel: +1-708--534-1414 Fax: +1-708-534-5441
Eastern
Puerto Rico
2615-25 Brabant-Marineau. (Saint-Laurent)
R.R. Barril, Inc.
Montreal, Quebec, H4S 1R8
Tel: +1-787-982-1550 Fax: +1-787-982-1570
Simcoe, Ontario N3Y 4K9
750 Central Avenue University Park, IL 60466 Tel: 708-534-1414 Fax: 708-534-5441 Toll-Free: 1-800-301-2701
Tel: (514) 745-3835
U.S. Customer Service Tel: +1-708-534-1414 Fax: +1-708-534-5441
Southern Region Servicing: Alabama, Arkansas, Kansas, Louisiana, Mississippi, Missouri, Oklahoma, Tennessee, Texas
Mexico
1313 Avenue R Grand Prairie, TX 75050
Jose Antonio Bueno
Tel: 972-343-9206 Fax: 972-641-8946 Toll-Free: 1-800-451-4414
Mexico Tel: +52-777-169-4546 U.S. Customer Service Tel: +1-708-534-1414 Fax: +1-708-534-5441
Western Region Servicing: Alaska, Arizona, California, Colorado, Hawaii, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, Wyoming 1385 Greg Street Sparks, NV 89431 Tel: 775-331-7029 Fax: 775-331-5075 Toll-Free: 1-800-572-0051
#580 / Printed in USA / 11.07 / ©2007
b
u
i
l
d
i
n
g
c
o
n
n
e
c
t
i
o
www.anvilintl.com
n
s
t
h
a
t
l
a
s
t
