Cellu-Mask⢠Adhesive Foam Laminate Brochure
Convenient Polyethylene Foam Surface Protection That Clings To Your Product For Fast, Easy, Tape-Free Application and Removal.
™
Cellu-Mask Adhesive Foam Laminate Value-Added, Protective, Durable Foam Laminate
Easy, Tape-Free Application Easy-to-handle material saves labor, increases productivity and reduces costs. Affixes readily to a wide range of highly-polished or painted metal surfaces or smooth plastic substrates. Adhesive holds protection securely in place over time.
Superior Surface Protection and Lightweight Cushioning 1⁄16" thick Cell-Aire® polyethylene foam prevents scratching and abrasion while resisting moisture, tears and punctures. Reduces damage and improves customer satisfaction. Used as an interleave between large or heavy objects, narrow strips at critical weight-bearing points provide the required protection.
Outstanding Pliability Conforms easily to compound or unusual shapes and protects even hard to reach places.
Withstands Weight Crush-resistant foam provides durable interleaving for heavier products.
Convenient “Spot” Protection Can be easily trimmed, or precisely die cut to fit selective areas. No tape necessary and no need to wrap or cover the entire item.
No Adhesive Residue Can be quickly and cleanly removed. Leaves no residue or adhesive “patterning”.
Reusable Can be used for in-plant handling protection during manufacturing in addition to shipping applications.
Availability Cellu-Mask – Polyethylene foam with adhesive film laminate. Available in 48" x 600 ft. rolls. ™
Cellu-Mask™ Foam can be re-applied multiple times, thus reducing solid waste and material cost.
CFC and HCFC-Free Important Note: With all adhesive-coated products, certain precautions must be observed. Products should be stored in a cool, dry area. Sealed Air recommends that you test this product under your particular environmental and shipping conditions. Ultraviolet resistance checks will take at least 30 days. Sealed Air assumes no liability, except for replacement of Cellu-Mask™ products, should it prove defective.
Distributed By:
Corporate Office: Sealed Air Corporation Park 80 East, Saddle Brook, NJ 07663-5291
www.sealedair.com
® Reg. U.S. Pat. & TM Off. © Sealed Air Corporation 2004. All rights reserved. Printed in the U.S.A. The “9 Dot Logo” and “Sealed Air” are registered trademarks of Sealed Air Corporation (US). D-123 1/05
™
Cellu-Mask Adhesive Foam Laminate Value-Added, Protective, Durable Foam Laminate
Easy, Tape-Free Application Easy-to-handle material saves labor, increases productivity and reduces costs. Affixes readily to a wide range of highly-polished or painted metal surfaces or smooth plastic substrates. Adhesive holds protection securely in place over time.
Superior Surface Protection and Lightweight Cushioning 1⁄16" thick Cell-Aire® polyethylene foam prevents scratching and abrasion while resisting moisture, tears and punctures. Reduces damage and improves customer satisfaction. Used as an interleave between large or heavy objects, narrow strips at critical weight-bearing points provide the required protection.
Outstanding Pliability Conforms easily to compound or unusual shapes and protects even hard to reach places.
Withstands Weight Crush-resistant foam provides durable interleaving for heavier products.
Convenient “Spot” Protection Can be easily trimmed, or precisely die cut to fit selective areas. No tape necessary and no need to wrap or cover the entire item.
No Adhesive Residue Can be quickly and cleanly removed. Leaves no residue or adhesive “patterning”.
Reusable Can be used for in-plant handling protection during manufacturing in addition to shipping applications.
Availability Cellu-Mask – Polyethylene foam with adhesive film laminate. Available in 48" x 600 ft. rolls. ™
Cellu-Mask™ Foam can be re-applied multiple times, thus reducing solid waste and material cost.
CFC and HCFC-Free Important Note: With all adhesive-coated products, certain precautions must be observed. Products should be stored in a cool, dry area. Sealed Air recommends that you test this product under your particular environmental and shipping conditions. Ultraviolet resistance checks will take at least 30 days. Sealed Air assumes no liability, except for replacement of Cellu-Mask™ products, should it prove defective.
Distributed By:
Corporate Office: Sealed Air Corporation Park 80 East, Saddle Brook, NJ 07663-5291
www.sealedair.com
® Reg. U.S. Pat. & TM Off. © Sealed Air Corporation 2004. All rights reserved. Printed in the U.S.A. The “9 Dot Logo” and “Sealed Air” are registered trademarks of Sealed Air Corporation (US). D-123 1/05
