Certificate No: EWW301B
Certificate No: EWW301B
Breather Membrane Strotex Ultra Description of Product Breather Membrane Strotex Ultra is used for both warm and cold pitched roof
Photo/isometric drawing provided by manufacturer
constructions.
Key Factors Assessed
Health, Hygiene and Environmental - Approved Document C
Durability serviceability and identification
Validity This certificate was first issued on 8th January 2013 and is valid until 8th January 2018 Issue Dated 5th December 2014
This Registered Detail relates to Principal Building Products Ltd. Breather Membrane Strotex Ultra, for use in both warm and cold pitched roof constructions.
When installed on new housing developments, details from BS5250 Code of Practice for the control of condensation in buildings, should also be used.
LABC consider that, Breather Membrane Strotex Ultra, will meet the functional requirements of the Building Regulations (listed below) if the criteria detailed in this certificate are met;
The Building Regulations 2010 (as amended) England & Wales Regulation 7
Materials and workmanship
Note:
The products are acceptable.
AD C
Resistance to Contaminants and Moisture
Note:
The products can contribute to meeting this Requirement subject to limitations detailed below in Conditions section.
The Building Regulations 2010 (as amended) England None presently
The Building Regulations 2010 (as amended) Wales None presently
The Building (Scotland) Regulations 2004 (as amended) If you would like to discuss a specific use of the product in Scotland it will require an additional assessment under the Scottish Building Regulations and accordingly you should contact the LABSS STAS Administrator at www.labss.org
LABC Warranty This product confirms to the Functional Requirements of the LABC Warranty Technical Manual.
Strotex Installation Instructions Declaration of Conformity No FS/023a/2012
Principal Building Products Ltd Barbot Hall Industrial Estate Mangham Road Rotherham S61 4RJ Tel: 01709 728150 Email: [email protected] Web: www.pbpltd.co.uk
Breather Membrane Strotex Ultra Description of Product Breather Membrane Strotex Ultra is used for both warm and cold pitched roof
Photo/isometric drawing provided by manufacturer
constructions.
Key Factors Assessed
Health, Hygiene and Environmental - Approved Document C
Durability serviceability and identification
Validity This certificate was first issued on 8th January 2013 and is valid until 8th January 2018 Issue Dated 5th December 2014
This Registered Detail relates to Principal Building Products Ltd. Breather Membrane Strotex Ultra, for use in both warm and cold pitched roof constructions.
When installed on new housing developments, details from BS5250 Code of Practice for the control of condensation in buildings, should also be used.
LABC consider that, Breather Membrane Strotex Ultra, will meet the functional requirements of the Building Regulations (listed below) if the criteria detailed in this certificate are met;
The Building Regulations 2010 (as amended) England & Wales Regulation 7
Materials and workmanship
Note:
The products are acceptable.
AD C
Resistance to Contaminants and Moisture
Note:
The products can contribute to meeting this Requirement subject to limitations detailed below in Conditions section.
The Building Regulations 2010 (as amended) England None presently
The Building Regulations 2010 (as amended) Wales None presently
The Building (Scotland) Regulations 2004 (as amended) If you would like to discuss a specific use of the product in Scotland it will require an additional assessment under the Scottish Building Regulations and accordingly you should contact the LABSS STAS Administrator at www.labss.org
LABC Warranty This product confirms to the Functional Requirements of the LABC Warranty Technical Manual.
Strotex Installation Instructions Declaration of Conformity No FS/023a/2012
Principal Building Products Ltd Barbot Hall Industrial Estate Mangham Road Rotherham S61 4RJ Tel: 01709 728150 Email: [email protected] Web: www.pbpltd.co.uk
