channel
CHANNEL q PL, q GR, q PG, q Other
q AS 150
SOLID
q AS 150EH
q PL, q GR, q PG, q Other
WITH ELONGATED HOLES 9" 1" 16 x 1 8 (14.3 x 28.6)
1 5" 8 (41.3)
Dia. Holes
1 5" 8 (41.3) 7" (11.1) 16
Wt/100 Ft: 249 Lbs
Wt/100 Ft: 254 Lbs
q AS 150KO
q PL, q GR, q PG, q Other
q AS 150H
WITH KNOCK OUT 7" 8 Dia.
(22.2)
2"
(50.8)
q PL, q GR, q PG, q Other
WITH HOLES 9" 16 Dia. (14.3)
Knockouts
Holes
1 5" 8 (41.3)
1 5" 8 (41.3)
6"
3"
(101.6)
(76.2)
Wt/100 Ft: 254 Lbs
q AS 150S
15" 16 (23.8)
1 87" (47.6)
Wt/100 Ft: 249 Lbs
q PL, q GR, q PG, q Other
WITH LONG SLOTS 13" 32 x 3 (10.32 x 76.2)
Slot
1 5" 8 (41.3) 1" 2 (12.7)
4"
(101.6)
Wt/100 Ft: 239 Lbs
LEGEND: GR: Powder Coated Supr-Green EG: Electro-Galvanized PG: Pre-Galvanized AL: Aluminum HG: Hot Dipped Galvanized PL: Plain SS: Stainless Steel ZTC: Zinc Trivalent Chromium Stainless Steel (SS), Zinc Trivalent Chromium (ZTC) and Hot Dipped Galvanized (HG) are specialty finishes. Pricing is located in the Specialty Strut Section of the Anvil-Strut price book.
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: AS-1.15
CHANNEL AS 150
1 5" 8
3" 8
(41.3)
27⁄ 16" X 15⁄ 8"
(61.9 x 41.3mm) 12 Gauge Channel • wt./100 ft. - 254#
(9.5)
9" 32 (7.14)
Stocked in pre-galvanized, plain and powder coated Supr-green, in both 10 and 20 ft. lengths. Other materials, finishes and lengths are available upon request.
7" 8 (22.2)
7" 2 16
X
(61.9)
1.347 (34.2)
Y
PROPERTIES OF SECTION Catalog No. AS 150
Wt./Ft.
Area of Section
X-X Axis
Y-Y Axis
Lbs.
Kg
Sq. In.
Sq. CM
I in4
I cm4
S in3
S cm3
r in.
r cm
l in4
I cm4
S in3
S cm3
r in.
r cm
2.54
3.8
0.720
4.645
0.525
21.852
0.396
6.489
0.854
2.169
0.334
13.902
0.411
6.735
0.681
1.730
I = Moment of Inertia S = Section Modulus r = Radius of Gyration
BEAM & COLUMN LOADS Static Beam Load (X-X Axis) Span Max. Max Uniform Load at Deflection or Allowable Deflection Unbraced Allowable at Uniform Load at Span/180 Span/240 Span/360 Weight of Slot Face Uniform Height Load Deflection Deflection Deflection Channel Load In Lbs In Lbs Lbs Lbs Lbs Lbs 12 18 24 30 36 42 48 60 72 84 96 108 120 144 168 180 192 216 240
6,640 4,430 3,320 2,660 2,210 1,900 1,660 1,330 1,110 950 830 740 660 550 470 440 420 370 330
0.01 0.02 0.04 0.06 0.09 0.12 0.15 0.24 0.35 0.47 0.62 0.78 0.97 1.39 1.89 2.17 2.47 3.13 3.86
6,640 4,430 3,320 2,660 2,210 1,900 1,660 1,330 1,110 940 720 570 460 320 230 200 180 140 110
6,640 4,430 3,320 2,660 2,210 1,900 1,660 1,330 960 700 540 420 340 240 180 150 130 110 90
6,640 4,430 3,320 2,660 2,210 1,870 1,430 920 640 470 360 280 230 160 120 100 90 70 60
# Bearing Load may limit load ** Not recommended - KL/r exceeds 200 Notes 1. The beam capacities shown above include the weight of the strut beam. The beam weight must be subtracted from these capacities to arrive at the net beam capacity. 2. Allowable beam loads are based on a uniformly loaded, simply supported beam. For capacities of a beam loaded at midspan at a single point, multiply the beam capacity by 50% and deflection by 80%.
AS-1.15
2.5 3.8 5.1 6.4 7.6 8.9 10.2 12.7 15.2 17.8 20.3 22.9 25.4 30.5 35.6 38.1 40.6 45.7 50.8
5,050 4,870 4,630 4,350 4,030 3,700 3,350 2,770 2,360 2,070 1,850 1,670 1,520 1,290 1,110 ** ** ** **
Column Loading Data Max. Column Load Applied at C.G. k=.65
k=.80
k=1.0
k=1.2
Lbs
Lbs
Lbs
Lbs
15,940 14,970 13,750 12,390 11,000 9,650 8,400 6,240 4,790 3,890 3,290 2,860 2,530 2,070 1,750 1,620 1,510 ** **
15,530 14,140 12,500 10,790 9,160 7,680 6,390 4,620 3,630 3,010 2,580 2,260 2,020 1,650 1,380 ** ** ** **
14,880 12,920 10,790 8,770 7,020 5,590 4,620 3,450 2,770 2,330 2,020 1,770 1,580 ** ** ** ** ** **
14,140 11,640 9,160 7,020 5,360 4,320 3,630 2,770 2,260 1,910 1,650 1,440 ** ** ** ** ** ** **
3. The above chart shows beam capacities for strut without holes. For strut with holes, multiply by the following: EH by 88%, S by 90%, H ( 9⁄16 holes) by 88%, KO by 82% . 4. Refer to the Anvil-Strut Catalog for reduction factors for unbraced lengths
CHANNEL BEAM & COLUMN LOADS - METRIC Static Beam Load (X-X Axis) Span Max. Max or Allowable Uniform Load at Deflection Deflection Unbraced Allowable at Uniform Load at Span/180 Span/240 Span/360 Weight of Slot Face Uniform Height Load Deflection Deflection Deflection Channel Load mm Kn mm Kn Kn Kn Kg Kn 305 457 610 762 914 1,067 1,219 1,524 1,829 2,134 2,438 2,743 3,048 3,658 4,267 4,572 4,877 5,486 6,096
29.5 19.7 14.8 11.8 9.8 8.5 7.4 5.9 4.9 4.2 3.7 3.3 2.9 2.4 2.1 2.0 1.9 1.6 1.5
0.3 0.5 1.0 1.5 2.3 3.0 3.8 6.1 8.9 11.9 15.7 19.8 24.6 35.3 48.0 55.1 62.7 79.5 98.0
29.5 19.7 14.8 11.8 9.8 8.5 7.4 5.9 4.9 4.2 3.2 2.5 2.0 1.4 1.0 0.9 0.8 0.6 0.5
29.5 19.7 14.8 11.8 9.8 8.5 7.4 5.9 4.3 3.1 2.4 1.9 1.5 1.1 0.8 0.7 0.6 0.5 0.4
29.5 19.7 14.8 11.8 9.8 8.3 6.4 4.1 2.8 2.1 1.6 1.2 1.0 0.7 0.5 0.4 0.4 0.3 0.3
1.1 1.7 2.3 2.9 3.4 4.0 4.6 5.8 6.9 8.1 9.2 10.4 11.5 13.8 16.1 17.3 18.4 20.7 23.0
22.5 21.7 20.6 19.3 17.9 16.5 14.9 12.3 10.5 9.2 8.2 7.4 6.8 5.7 4.9 ** ** ** **
Column Loading Data Max. Column Load Applied at C.G. k=.65
k=.80
k=1.0
k=1.2
Kn
Kn
Kn
Kn
70.9 66.6 61.2 55.1 48.9 42.9 37.4 27.8 21.3 17.3 14.6 12.7 11.3 9.2 7.8 7.2 6.7 ** **
69.1 62.9 55.6 48.0 40.7 34.2 28.4 20.6 16.1 13.4 11.5 10.1 9.0 7.3 6.1 ** ** ** **
66.2 57.5 48.0 39.0 31.2 24.9 20.6 15.3 12.3 10.4 9.0 7.9 7.0 ** ** ** ** ** **
62.9 51.8 40.7 31.2 23.8 19.2 16.1 12.3 10.1 8.5 7.3 6.4 ** ** ** ** ** ** **
CHANNEL SPECIFICATIONS Materials CARBON STEEL Channels are formed from high-quality, structural grade carbon steel which has been manufactured in a ccordance with ASTM A-1011-04SS Grade 33 (hot rolled), or ASTM 366 (cold rolled), with mechanical properties of 33 ksi minimum yield and 52 ksi minimum tensile strength. The precision roll-forming process by which the channels are formed “cold works" the steel, thereby increasing its mechanical properties.
STAINLESS STEEL Channels are formed from chromium-nickel stainless steel sheet manufactured in accordance with ASTM A-240 specification, offered in both AISI Type 304 and 316 material to provide protection in varying corrosive conditions.
ALUMINUM
Extruded aluminum channel is produced from 6063-T6 alloy, and fittings are produced from 5052-H32 alloy, both in accordance with ASTM B-221 specifications. Aluminum is suitable for use in various corrosive environments.
Finishes PRE-GALVANIZED Hot dip, mill galvanized coating produced through a process of continuously passing the steel through a bath of molten zinc. This process is performed in accordance with ASTM A-653. The thickness of the zinc coating conforms with ASTM G-90 which represents a coating thickness of .90 ounces of zinc per square foot. This coating is applied to the steel master coils prior to slitting and fabrication.
AS-1.15
HOT DIP GALVANIZED - POST FABRICATION The finished channel is completely immersed in a bath of molten zinc, resulting in the complete coating of all surfaces of the product, including edges and welds. Strut channels that are hot dip galvanized, have a total coating weight of 3.0 ounces of zinc per square foot in accordance with ASTM A-123 specification. This coating provides superior results in applications calling for prolonged outdoor exposure.
SUPR-GREEN POWDER COATING Strut channels are coated after fabrication with polyester powder finish. This coating is applied using an electrostatic spray process, beginning with cleaning and phosphating, through a bonderite pretreatment process, and ending with oven curing. The resulting finish provides a high quality appearance and durability. Powder Coating is in accordance with ASTM B-117 (standard practice for operating salt spray (fog) apparatus) to 500 hours with less than 1⁄8" scribe creep.
ZINC TRIVALENT CHROMIUM The finished channel undergoes a multi-step process consisting of electrogalvanizing, in accordance with ASTM B-633-85, followed by an application of zinc trivalent chromium, which provides the distinctive gold c oloration of the finish. All surfaces are coated because the process is performed after fabrication.
PVC A corrosive resistant PVC (polyvinyl chloride) coating is applied over the completed strut channel. The c oating process consists of surface pretreatment, followed by preheating of the part, which is then passed through a fl uidized bed of vinyl plastic powder. The powder melts onto the heated channel forming a smooth coating which undergoes a final heat curing.
q AS 150
SOLID
q AS 150EH
q PL, q GR, q PG, q Other
WITH ELONGATED HOLES 9" 1" 16 x 1 8 (14.3 x 28.6)
1 5" 8 (41.3)
Dia. Holes
1 5" 8 (41.3) 7" (11.1) 16
Wt/100 Ft: 249 Lbs
Wt/100 Ft: 254 Lbs
q AS 150KO
q PL, q GR, q PG, q Other
q AS 150H
WITH KNOCK OUT 7" 8 Dia.
(22.2)
2"
(50.8)
q PL, q GR, q PG, q Other
WITH HOLES 9" 16 Dia. (14.3)
Knockouts
Holes
1 5" 8 (41.3)
1 5" 8 (41.3)
6"
3"
(101.6)
(76.2)
Wt/100 Ft: 254 Lbs
q AS 150S
15" 16 (23.8)
1 87" (47.6)
Wt/100 Ft: 249 Lbs
q PL, q GR, q PG, q Other
WITH LONG SLOTS 13" 32 x 3 (10.32 x 76.2)
Slot
1 5" 8 (41.3) 1" 2 (12.7)
4"
(101.6)
Wt/100 Ft: 239 Lbs
LEGEND: GR: Powder Coated Supr-Green EG: Electro-Galvanized PG: Pre-Galvanized AL: Aluminum HG: Hot Dipped Galvanized PL: Plain SS: Stainless Steel ZTC: Zinc Trivalent Chromium Stainless Steel (SS), Zinc Trivalent Chromium (ZTC) and Hot Dipped Galvanized (HG) are specialty finishes. Pricing is located in the Specialty Strut Section of the Anvil-Strut price book.
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: AS-1.15
CHANNEL AS 150
1 5" 8
3" 8
(41.3)
27⁄ 16" X 15⁄ 8"
(61.9 x 41.3mm) 12 Gauge Channel • wt./100 ft. - 254#
(9.5)
9" 32 (7.14)
Stocked in pre-galvanized, plain and powder coated Supr-green, in both 10 and 20 ft. lengths. Other materials, finishes and lengths are available upon request.
7" 8 (22.2)
7" 2 16
X
(61.9)
1.347 (34.2)
Y
PROPERTIES OF SECTION Catalog No. AS 150
Wt./Ft.
Area of Section
X-X Axis
Y-Y Axis
Lbs.
Kg
Sq. In.
Sq. CM
I in4
I cm4
S in3
S cm3
r in.
r cm
l in4
I cm4
S in3
S cm3
r in.
r cm
2.54
3.8
0.720
4.645
0.525
21.852
0.396
6.489
0.854
2.169
0.334
13.902
0.411
6.735
0.681
1.730
I = Moment of Inertia S = Section Modulus r = Radius of Gyration
BEAM & COLUMN LOADS Static Beam Load (X-X Axis) Span Max. Max Uniform Load at Deflection or Allowable Deflection Unbraced Allowable at Uniform Load at Span/180 Span/240 Span/360 Weight of Slot Face Uniform Height Load Deflection Deflection Deflection Channel Load In Lbs In Lbs Lbs Lbs Lbs Lbs 12 18 24 30 36 42 48 60 72 84 96 108 120 144 168 180 192 216 240
6,640 4,430 3,320 2,660 2,210 1,900 1,660 1,330 1,110 950 830 740 660 550 470 440 420 370 330
0.01 0.02 0.04 0.06 0.09 0.12 0.15 0.24 0.35 0.47 0.62 0.78 0.97 1.39 1.89 2.17 2.47 3.13 3.86
6,640 4,430 3,320 2,660 2,210 1,900 1,660 1,330 1,110 940 720 570 460 320 230 200 180 140 110
6,640 4,430 3,320 2,660 2,210 1,900 1,660 1,330 960 700 540 420 340 240 180 150 130 110 90
6,640 4,430 3,320 2,660 2,210 1,870 1,430 920 640 470 360 280 230 160 120 100 90 70 60
# Bearing Load may limit load ** Not recommended - KL/r exceeds 200 Notes 1. The beam capacities shown above include the weight of the strut beam. The beam weight must be subtracted from these capacities to arrive at the net beam capacity. 2. Allowable beam loads are based on a uniformly loaded, simply supported beam. For capacities of a beam loaded at midspan at a single point, multiply the beam capacity by 50% and deflection by 80%.
AS-1.15
2.5 3.8 5.1 6.4 7.6 8.9 10.2 12.7 15.2 17.8 20.3 22.9 25.4 30.5 35.6 38.1 40.6 45.7 50.8
5,050 4,870 4,630 4,350 4,030 3,700 3,350 2,770 2,360 2,070 1,850 1,670 1,520 1,290 1,110 ** ** ** **
Column Loading Data Max. Column Load Applied at C.G. k=.65
k=.80
k=1.0
k=1.2
Lbs
Lbs
Lbs
Lbs
15,940 14,970 13,750 12,390 11,000 9,650 8,400 6,240 4,790 3,890 3,290 2,860 2,530 2,070 1,750 1,620 1,510 ** **
15,530 14,140 12,500 10,790 9,160 7,680 6,390 4,620 3,630 3,010 2,580 2,260 2,020 1,650 1,380 ** ** ** **
14,880 12,920 10,790 8,770 7,020 5,590 4,620 3,450 2,770 2,330 2,020 1,770 1,580 ** ** ** ** ** **
14,140 11,640 9,160 7,020 5,360 4,320 3,630 2,770 2,260 1,910 1,650 1,440 ** ** ** ** ** ** **
3. The above chart shows beam capacities for strut without holes. For strut with holes, multiply by the following: EH by 88%, S by 90%, H ( 9⁄16 holes) by 88%, KO by 82% . 4. Refer to the Anvil-Strut Catalog for reduction factors for unbraced lengths
CHANNEL BEAM & COLUMN LOADS - METRIC Static Beam Load (X-X Axis) Span Max. Max or Allowable Uniform Load at Deflection Deflection Unbraced Allowable at Uniform Load at Span/180 Span/240 Span/360 Weight of Slot Face Uniform Height Load Deflection Deflection Deflection Channel Load mm Kn mm Kn Kn Kn Kg Kn 305 457 610 762 914 1,067 1,219 1,524 1,829 2,134 2,438 2,743 3,048 3,658 4,267 4,572 4,877 5,486 6,096
29.5 19.7 14.8 11.8 9.8 8.5 7.4 5.9 4.9 4.2 3.7 3.3 2.9 2.4 2.1 2.0 1.9 1.6 1.5
0.3 0.5 1.0 1.5 2.3 3.0 3.8 6.1 8.9 11.9 15.7 19.8 24.6 35.3 48.0 55.1 62.7 79.5 98.0
29.5 19.7 14.8 11.8 9.8 8.5 7.4 5.9 4.9 4.2 3.2 2.5 2.0 1.4 1.0 0.9 0.8 0.6 0.5
29.5 19.7 14.8 11.8 9.8 8.5 7.4 5.9 4.3 3.1 2.4 1.9 1.5 1.1 0.8 0.7 0.6 0.5 0.4
29.5 19.7 14.8 11.8 9.8 8.3 6.4 4.1 2.8 2.1 1.6 1.2 1.0 0.7 0.5 0.4 0.4 0.3 0.3
1.1 1.7 2.3 2.9 3.4 4.0 4.6 5.8 6.9 8.1 9.2 10.4 11.5 13.8 16.1 17.3 18.4 20.7 23.0
22.5 21.7 20.6 19.3 17.9 16.5 14.9 12.3 10.5 9.2 8.2 7.4 6.8 5.7 4.9 ** ** ** **
Column Loading Data Max. Column Load Applied at C.G. k=.65
k=.80
k=1.0
k=1.2
Kn
Kn
Kn
Kn
70.9 66.6 61.2 55.1 48.9 42.9 37.4 27.8 21.3 17.3 14.6 12.7 11.3 9.2 7.8 7.2 6.7 ** **
69.1 62.9 55.6 48.0 40.7 34.2 28.4 20.6 16.1 13.4 11.5 10.1 9.0 7.3 6.1 ** ** ** **
66.2 57.5 48.0 39.0 31.2 24.9 20.6 15.3 12.3 10.4 9.0 7.9 7.0 ** ** ** ** ** **
62.9 51.8 40.7 31.2 23.8 19.2 16.1 12.3 10.1 8.5 7.3 6.4 ** ** ** ** ** ** **
CHANNEL SPECIFICATIONS Materials CARBON STEEL Channels are formed from high-quality, structural grade carbon steel which has been manufactured in a ccordance with ASTM A-1011-04SS Grade 33 (hot rolled), or ASTM 366 (cold rolled), with mechanical properties of 33 ksi minimum yield and 52 ksi minimum tensile strength. The precision roll-forming process by which the channels are formed “cold works" the steel, thereby increasing its mechanical properties.
STAINLESS STEEL Channels are formed from chromium-nickel stainless steel sheet manufactured in accordance with ASTM A-240 specification, offered in both AISI Type 304 and 316 material to provide protection in varying corrosive conditions.
ALUMINUM
Extruded aluminum channel is produced from 6063-T6 alloy, and fittings are produced from 5052-H32 alloy, both in accordance with ASTM B-221 specifications. Aluminum is suitable for use in various corrosive environments.
Finishes PRE-GALVANIZED Hot dip, mill galvanized coating produced through a process of continuously passing the steel through a bath of molten zinc. This process is performed in accordance with ASTM A-653. The thickness of the zinc coating conforms with ASTM G-90 which represents a coating thickness of .90 ounces of zinc per square foot. This coating is applied to the steel master coils prior to slitting and fabrication.
AS-1.15
HOT DIP GALVANIZED - POST FABRICATION The finished channel is completely immersed in a bath of molten zinc, resulting in the complete coating of all surfaces of the product, including edges and welds. Strut channels that are hot dip galvanized, have a total coating weight of 3.0 ounces of zinc per square foot in accordance with ASTM A-123 specification. This coating provides superior results in applications calling for prolonged outdoor exposure.
SUPR-GREEN POWDER COATING Strut channels are coated after fabrication with polyester powder finish. This coating is applied using an electrostatic spray process, beginning with cleaning and phosphating, through a bonderite pretreatment process, and ending with oven curing. The resulting finish provides a high quality appearance and durability. Powder Coating is in accordance with ASTM B-117 (standard practice for operating salt spray (fog) apparatus) to 500 hours with less than 1⁄8" scribe creep.
ZINC TRIVALENT CHROMIUM The finished channel undergoes a multi-step process consisting of electrogalvanizing, in accordance with ASTM B-633-85, followed by an application of zinc trivalent chromium, which provides the distinctive gold c oloration of the finish. All surfaces are coated because the process is performed after fabrication.
PVC A corrosive resistant PVC (polyvinyl chloride) coating is applied over the completed strut channel. The c oating process consists of surface pretreatment, followed by preheating of the part, which is then passed through a fl uidized bed of vinyl plastic powder. The powder melts onto the heated channel forming a smooth coating which undergoes a final heat curing.
