Chief Architect Premier X5: 03 of 14 Mastering Chiefs CAD Tools.layout
Welcome To The Webinar
DATE:
3 of 14 Mastering Chief's CAD Tools BY:
Roof Coating - (TBD) 5" Concrete Roof 11 Guage Wire Mesh
Embeded Beam
6" Concrete Patio Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
2" x 4" Treated Framing on Non-Concrete Walls
8" x 6" Concrete Headers Above Windows and Doors 2 - 1/2" ReeBar
36" x 6" Embeded Concrete Beam 5/8" ReeBar (See Specs) 6"
Railings (TBD) Embeded Beam
12" Concrete Columns 6 - 5/8" ReeBar 12" OC Stirpus
Glass Railings (TBD)
Embeded Beam
Concrete Steps (TBD)
5" Concrete Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
5" Concrete Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
5"
8" x 8" Concrete Block Walls Metal Reinforcing To Code 1/2" ReeBar In Cavities 32" OC
8" x 8" Concrete Rim Beam 4 - 1/2" ReeBar 5'-10"
5" PVC Drain Tile Drain to Daylight
30" x 30" x 36" Concrete Footings 4 - 1/2" ReeBar
8" Concrete Walls 1/2" ReeBar 8" x 8" Coating for Cistern (TBD)
CISTERN
24" x 18" Concrete Footings 4 - 1/2" ReeBar 30" x 30" Pad Footings (Per Plan) Tie ReeBar Together from Pad to Trench Footings
General Notes: 1) Concrete strength - minimum 3750 psi at 28 days. 2) Concrete cover: a) Slab - Top cover at 1 1/2" Slab - Bottom cover 1 1/2" b) Columns - 2" Cover 3) All reinforcing steel are HT (High Tensile) bars. 4) 2" Cover on all Metal in Columns and Pillars
5" Concrete Roof 1/2" ReeBar 8" x 8" Coating for Cistren (TBD)
Adjust Footings to Grade
30" x 30" x 18" Concrete Footings 4 - 1/2" ReeBar
952-236-4427
10'-0"
8" x 12" Concrete Pillar W/ Beveled Top 4 - 5/8" ReeBar
PROJECT DESCRIPTION:
8" x 12" Concrete Rim Beam 4 - 1/2" ReeBar
30" x 30" x 18" Concrete Footings 4 - 1/2" ReeBar
Welcome
Embeded Beam
8" x 12" Concrete Rim Beam 4 - 1/2" ReeBar 10'-0"
6" Concrete Patio Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
Embeded Beam
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
6"
12" Concrete Columns 6 - 5/8" ReeBar 12" OC Stirpus
NO.
Roof Coating - (TBD) 5" Concrete Roof 1/2" ReeBar 8" x 8" OC
3'-1"
Roof Coating - (TBD) 5" Concrete Roof 1/2" ReeBar 8" x 8" OC
Roof Coating - (TBD) 6" Concrete Roof 1/2" ReeBar 8" x 8" OC
SHEET TITLE:
8" x 24" Concrete Wall Reinforcement Pillars 4 - 5/8" ReeBar
8" x 8" Concrete Rim Beam 4 - 1/2" ReeBar
DESCRIPTION:
8" x 16" Concrete Rim Beam 6 - 1/2" ReeBar
24" x 18" Concrete Footings 4 - 1/2" ReeBar
Adjust all Footing Depths to Grade The Pad Footings for all posts are to be 30" X 30" X 18" Concete with ReeBar and the top of the Pad Footing should be 4' below grade
DATE: 3/13/2013 SCALE:
Dan Baumann - Your Presenter
No Scale: SHEET:
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
01-1
Solving 12 Chief Architect User Mistakes & Time Wasters
Use your computer speakers to listen to this presentation
If you want to call in the phone number is: 415-655-0055
Call In "Access Code": 990-259-546
If calling in please enter the "Audio Pin Code" when asked
Mute & UnMute Audio If Available
Choose Phone or Computer Speakers
View GTW Full or Window
Choose Audio Device and Settings
Raise Hand to Ask a Question
Summary of Questions
PROJECT DESCRIPTION:
Settings for this Control Panel
952-236-4427
Show and Hide GTW Control Panel
NO.
Any Downloads will be at ChiefExperts.com in the "Latest News Area"
GoToWebinar Instructions
SHEET TITLE:
This Webinar Starts at: 3:00 PM Central
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
DESCRIPTION:
BY:
DATE:
Information for this Presentation:
DATE: 3/13/2013
Type Your Questions Here
Webinar Title and ID Code
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
SCALE: No Scale: SHEET:
01-2
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
BY: DESCRIPTION: NO. SHEET TITLE:
What's Included
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
PROJECT DESCRIPTION:
952-236-4427
1. Introduction to Chief Architect 2D CAD tools 2. Learn to think in terms of CAD -- X, Y, Z 3. Everything you draw is based on CAD polylines 4. Review of common CAD tools 5. Edit behaviors - how things act on the screen 6. Other tools 7. Group CAD items 8. CAD tools used regularly 9. Point & snap tools 10. CAD - Defaults 11. Drawing in a CAD Detail Window 12. Point to Point Snaps 13. Shaping CAD polyline boxes 14. Trim and Extend Tools 15. Working with Angles in CAD 16. Miscellaneous CAD functions 17. Q&A
DATE:
What We'll be Covering In This Webinar
DATE: 3/13/2013 SCALE: No Scale: SHEET:
01-3
Introduction to Chief's CAD Tools DESCRIPTION:
7"
10'-0"
Open Saved Camera
ROOF LINES ABOVE
GLASS RAILING
16'-0" 8'-0"
8" x 8" Concrete Rim Beam 4 - 1/2" ReeBar
8'-0" METAL RAILING
11'-10"
15'-2"
1" 3'-11"
5'-7"
4'-1"
21070
2'-6 1/2"
21'-2"
2'-4"
3050DC
3070
3'-9"
8'-1"
12'-8"
BEDROOM
10'-4"
2670
2670
6070
8'-0"
30" x 30" x 36" Concrete Footings 4 - 1/2" ReeBar
8" Concrete Walls 1/2" ReeBar 8" x 8" Coating for Cistern (TBD)
24" x 18" Concrete Footings 4 - 1/2" ReeBar 30" x 30" Pad Footings (Per Plan) Tie ReeBar Together from Pad to Trench Footings
General Notes: 1) Concrete strength - minimum 3750 psi at 28 days. 2) Concrete cover: a) Slab - Top cover at 1 1/2" Slab - Bottom cover 1 1/2" b) Columns - 2" Cover 3) All reinforcing steel are HT (High Tensile) bars. 4) 2" Cover on all Metal in Columns and Pillars
5" Concrete Roof 1/2" ReeBar 8" x 8" Coating for Cistren (TBD)
Adjust Footings to Grade
30" x 30" x 18" Concrete Footings 4 - 1/2" ReeBar
The Pad Footings for all posts are to be 30" X 30" X 18" Concete with ReeBar and the top of the Pad Footing should be 4' below grade
4'-0"
3. Drawing in CAD Detail Windows
4. Drawing on The Layout Pages
952-236-4427
Adding CAD Details
5"
3'-0 15/16"
e) bars.
Rename to Organize
24'-1"
10'
2" COVER ON ALL METAL IN COLUMNS AND PILLARS
50'
Footing Sizes Floor Thicknesses Wall Finish Roof Slope - How is it done Drains To Cistern Cap on Parapet wall Stairs to Roof - How many treads
3'-4 3/4"
5"
10'
6"
9'-6"
24" x 18" Concrete Footings 4 - 1/2" ReeBar
Adjust all Footing Depths to Grade
-2"
5'-4"
8" x 8" Concrete Rim Beam 4 - 1/2" ReeBar
CISTERN
DINING
BATH
5" Concrete Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
5"
5" PVC Drain Tile Drain to Daylight
5'-10"
1'-0"
5'-1 1/2"
8'-5"
7'-0"
5" Concrete Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
2'-9"
8" x 8" Concrete Block Walls Metal Reinforcing To Code 1/2" ReeBar In Cavities 32" OC
5070
3'-8"
8'-0"
5'-7"
30" x 30" x 18" Concrete Footings 4 - 1/2" ReeBar
5'-10"
2668
6'-0"
8" x 12" Concrete Pillar W/ Beveled Top 4 - 5/8" ReeBar
10'-0"
50'-0"
12'-0"
12'-3"
4'-3"
2068
2'-3"
2570
4'-0"
Glass Railings (TBD)
Embeded Beam
Concrete Steps (TBD)
14'-4"
2670
2670
11'-8"
2670 2670
6'-8"
LINEN
5070
STUDY
Embeded Beam
12" Concrete Columns 6 - 5/8" ReeBar 12" OC Stirpus
8" x 12" Concrete Rim Beam 4 - 1/2" ReeBar
CLOSET
HALL
4'-0"
13'-8"
36" x 6" Embeded Concrete Beam 5/8" ReeBar (See Specs)
2670
2670
7"
MASTER BATH
8'-8"
4'-5" 2436SC
11'-7"
7'-2"
1'-6"
BATH
6" Concrete Patio Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
2" x 4" Treated Framing on Non-Concrete Walls
8" x 6" Concrete Headers Above Windows and Doors 2 - 1/2" ReeBar
UP
HALL
BATH
9'-7"
50'-0"
17'-4"
D/W
HALL
Embeded Beam
8" x 12" Concrete Rim Beam 4 - 1/2" ReeBar
CLOSET KITCHEN
3'-3"
Embeded Beam
Railings (TBD)
7"
2'-5"
3040DC
5'-0"
2070
ROOF PLATFORM
17'-0"
15'-0" DN
2670
LINEN
5'-1"
Embeded Beam
6"
8'-3"
6'-0" 2'-1"
6" Concrete Patio Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
3'-3"
3'-8"
5'-0"
CLOSET
12" Concrete Columns 6 - 5/8" ReeBar 12" OC Stirpus
3'-3"
3050DC
2'-0"
4'-0"
1"
Roof Coating - (TBD) 6" Concrete Roof 1/2" ReeBar 8" x 8" OC
3'-8"
7'-3 1/4"
6'-0"
2'-1"
4'-4"
2'-7" 8'-4"
7'-8"
16'-5"
4'-0"
8" x 24" Concrete Wall Reinforcement Pillars 4 - 5/8" ReeBar
Roof Coating - (TBD) 5" Concrete Roof 1/2" ReeBar 8" x 8" OC
6"
3050DC
3050DC
7'-10"
MASTER BDRM
3050DC
15'-8"
LIVING BEDROOM
6070
8'-6"
Roof Coating - (TBD) 5" Concrete Roof 1/2" ReeBar 8" x 8" OC
3'-8"
3'-6"
7"
10070
3'-1"
1'-8"
9'-0" 18070
10'-0"
11'-4"
NO.
22'-0" 6'-8"
6070
10'-7"
14'-0" 7'-4"
Roof Coating - (TBD) 5" Concrete Roof 11 Guage Wire Mesh
8" x 16" Concrete Rim Beam 6 - 1/2" ReeBar
11'-2"
52'-0"
You Can Use the CAD Tools In all Views Except the 3D Cameras
16'-0"
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
19'-0"
19'-5"
20'-1"
16'-0"
PROJECT DESCRIPTION:
9
BY:
2. Drawing in Saved Camera Views
9
17'-2"
SHEET TITLE:
1. Drawing on Floorplans
DATE:
Where Do You Use The 2D CAD Tools in Chief
4" DRAIN TILE
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
DATE: 3/13/2013 SCALE: No Scale: SHEET:
01-4
SHEET TITLE:
Y = Top to ‐Bottom of Screen
3. Drawing in CAD Detail Windows
952-236-4427
PROJECT DESCRIPTION:
Z = Up and ‐Down or Front to ‐Back on your Screen
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
X = ‐Left and Right on Screen
Think in terms of CAD program not house building program
NO.
Use Transform/Replicate Object
DESCRIPTION:
BY:
Thinking in Terms of CAD will make your drawing process go faster
DATE:
Learn to Think in terms of CAD ‐ X, Y, Z
DATE: 3/13/2013 SCALE:
Chief is a CAD Program © 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
SHEET:
01-5
Ceiling Boxes Floor Boxes
Windows Are Many Boxes Molding Polyline Boxes
Slab Boxes
All 3D Elements Are Based On Polylines
952-236-4427
PROJECT DESCRIPTION:
Convert Polyline
Footing Boxes
SHEET TITLE:
Wall Boxes
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
Everything Starts With A CAD Polyline
Everything you draw is based on a Polyline or Polyline Shape
NO.
Slab Boxes
BY:
Overhang a Combination of Boxes
Roof Boxes at an Angle
DESCRIPTION:
3D Item in a Box
DATE:
Everything in Chief is Based on CAD Polylines
DATE: 3/13/2013
Virtually All 2D CAD Items can be Converted to 3D
All Items In Chief Start As a CAD Polyline
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
SCALE:
SHEET:
01-6
Overview of the CAD Items in Chief Fillet Box and Polyline Corners
Polyline Box and Shapes
Concentric Jump Tool and CAD Settings Arc Placement Tools (hint: It's Easy to Convert a Line to an Arc)
Minimize, Close
SHEET TITLE:
CAD Defaults
Marquee Tools
NO.
Spline Tool
DESCRIPTION:
Circles and Ovals
BY:
Fillet Box and Polyline Corners
Point Tool
Bumping/Pushing
Convert View to a CAD Detail
Grid Snaps On/Off All Snaps On/Off
Set Current CAD Drawing Layer
Color On/Off
Show Sheet OnScreen Line Weight On/Off Print Preview
PROJECT DESCRIPTION:
Angle Snaps On/Off
952-236-4427
Store all Plan CAD Details Here
Overview of the Interface
Arc Tools ‐ (hint: Convert Line)
DATE:
Fillet Box and Polyline Corners
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
Polyline Tool
Temp Dimensions On/Off
Edit Polyline Parts The EDIT Toolbar (See Next Page)
Edit Polyline Parts Reference Grid On/Off
DATE: 3/13/2013 SCALE:
Plan Info, Coordinates SHEET:
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
01-7 No Scale:
Copy and Copy in Place
Transform Replicate SHEET TITLE:
Multiple Copy
Make Parallel/Perpendicular Point to Point Snap
Overview of the Interface tools when you Select something
NO.
DESCRIPTION:
BY:
DATE:
Overview of the Edit Toolbar
Center Selected
Move Item To Front Break CAD Line (3) Trim Items (Use Fence) Extend items (Use Fence) Turn CAD Lines into Splines
Alignment and Distribute Tools
952-236-4427
PROJECT DESCRIPTION:
Reflect About Object
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
Add To Library
Plan Info, Coordinates Polyline Union (Make Outline) Polyline Union (Leave Middle) Polyline Union (Leave Edge)
Convert CAD Items Make CAD Box Cloud Object
Convert Line to Arc/Arc to Line
Chamfer Inside and Outside Corner Fillet Outside and Inside Corner, Join Ends, Remove Points Layer Properties For Selected Item
DATE: 3/13/2013 SCALE:
Record WalkThrough Along Path SHEET:
Draw Shape and Make Fence
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
01-8 No Scale:
DESCRIPTION:
BY:
DATE:
Selecting and Grouping Items
Naming a CAD Block
Group Selecting saves time Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
PROJECT DESCRIPTION:
Purge CAD Block to Reduce File Size and Increase Plan Speed
952-236-4427
Select All = Space Bar
Select Icon, Hold Shift Key and Marquee Select Those Items
SHEET TITLE:
NO.
Select Icon To Be Part of Specific Marque Select
Preferences ‐ Edit DATE: 3/13/2013 SCALE:
SHEET:
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
01-9
DESCRIPTION:
BY:
DATE:
Putting It all Together to Create a Cross Section
10"
8'-1 1/8"
16'-5 5/8"
3'-10"
8'-1 1/8"
10'-7 7/8"
11'-4"
1'-5"
3'
3'-6"
3'-6"
SHEET TITLE:
3'-6"
7 1/2"
03 Room Addition tied into 2 Story House
Cross Section From Scratch with the 2D CAD Tools
Using the Tools to Create a Section
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
PROJECT DESCRIPTION:
6'-8"
952-236-4427
NO.
15'-7 3/4"
3"
121 1/8''
125 1/8'' 0" FLOOR HEIGHT
431 1/8''
176''
176''
164''
585 7/16''
12'' 115 7/8''
12''
2 1/4''
109 1/8''
125 5/8''
18 3/4''
2 1/4''
10'-4"
2'-10"
176''
176''
2'-10"
175 1/4''
127 1/8'' 303 7/8''
431 1/8''
17'
DATE:
303 7/8''
17'
3/4''
7'-11"
10'-7"
10'-7 1/4"
1'-6"
10'-7 1/4"
1'-6"
0" FLOOR HEIGHT
Creating an Info Section © 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
3/13/2013 SCALE:
SHEET:
01-10
If you need help, I'm there for you! Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
952-236-4427
Can You Tell What's Being Built Here?
PROJECT DESCRIPTION:
SHEET TITLE:
NO.
DESCRIPTION:
BY:
DATE:
Thanks for Attending ‐ Now It's Time for Q&A
DATE: 3/13/2013 SCALE:
SHEET:
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
01-11
DATE:
3 of 14 Mastering Chief's CAD Tools BY:
Roof Coating - (TBD) 5" Concrete Roof 11 Guage Wire Mesh
Embeded Beam
6" Concrete Patio Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
2" x 4" Treated Framing on Non-Concrete Walls
8" x 6" Concrete Headers Above Windows and Doors 2 - 1/2" ReeBar
36" x 6" Embeded Concrete Beam 5/8" ReeBar (See Specs) 6"
Railings (TBD) Embeded Beam
12" Concrete Columns 6 - 5/8" ReeBar 12" OC Stirpus
Glass Railings (TBD)
Embeded Beam
Concrete Steps (TBD)
5" Concrete Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
5" Concrete Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
5"
8" x 8" Concrete Block Walls Metal Reinforcing To Code 1/2" ReeBar In Cavities 32" OC
8" x 8" Concrete Rim Beam 4 - 1/2" ReeBar 5'-10"
5" PVC Drain Tile Drain to Daylight
30" x 30" x 36" Concrete Footings 4 - 1/2" ReeBar
8" Concrete Walls 1/2" ReeBar 8" x 8" Coating for Cistern (TBD)
CISTERN
24" x 18" Concrete Footings 4 - 1/2" ReeBar 30" x 30" Pad Footings (Per Plan) Tie ReeBar Together from Pad to Trench Footings
General Notes: 1) Concrete strength - minimum 3750 psi at 28 days. 2) Concrete cover: a) Slab - Top cover at 1 1/2" Slab - Bottom cover 1 1/2" b) Columns - 2" Cover 3) All reinforcing steel are HT (High Tensile) bars. 4) 2" Cover on all Metal in Columns and Pillars
5" Concrete Roof 1/2" ReeBar 8" x 8" Coating for Cistren (TBD)
Adjust Footings to Grade
30" x 30" x 18" Concrete Footings 4 - 1/2" ReeBar
952-236-4427
10'-0"
8" x 12" Concrete Pillar W/ Beveled Top 4 - 5/8" ReeBar
PROJECT DESCRIPTION:
8" x 12" Concrete Rim Beam 4 - 1/2" ReeBar
30" x 30" x 18" Concrete Footings 4 - 1/2" ReeBar
Welcome
Embeded Beam
8" x 12" Concrete Rim Beam 4 - 1/2" ReeBar 10'-0"
6" Concrete Patio Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
Embeded Beam
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
6"
12" Concrete Columns 6 - 5/8" ReeBar 12" OC Stirpus
NO.
Roof Coating - (TBD) 5" Concrete Roof 1/2" ReeBar 8" x 8" OC
3'-1"
Roof Coating - (TBD) 5" Concrete Roof 1/2" ReeBar 8" x 8" OC
Roof Coating - (TBD) 6" Concrete Roof 1/2" ReeBar 8" x 8" OC
SHEET TITLE:
8" x 24" Concrete Wall Reinforcement Pillars 4 - 5/8" ReeBar
8" x 8" Concrete Rim Beam 4 - 1/2" ReeBar
DESCRIPTION:
8" x 16" Concrete Rim Beam 6 - 1/2" ReeBar
24" x 18" Concrete Footings 4 - 1/2" ReeBar
Adjust all Footing Depths to Grade The Pad Footings for all posts are to be 30" X 30" X 18" Concete with ReeBar and the top of the Pad Footing should be 4' below grade
DATE: 3/13/2013 SCALE:
Dan Baumann - Your Presenter
No Scale: SHEET:
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
01-1
Solving 12 Chief Architect User Mistakes & Time Wasters
Use your computer speakers to listen to this presentation
If you want to call in the phone number is: 415-655-0055
Call In "Access Code": 990-259-546
If calling in please enter the "Audio Pin Code" when asked
Mute & UnMute Audio If Available
Choose Phone or Computer Speakers
View GTW Full or Window
Choose Audio Device and Settings
Raise Hand to Ask a Question
Summary of Questions
PROJECT DESCRIPTION:
Settings for this Control Panel
952-236-4427
Show and Hide GTW Control Panel
NO.
Any Downloads will be at ChiefExperts.com in the "Latest News Area"
GoToWebinar Instructions
SHEET TITLE:
This Webinar Starts at: 3:00 PM Central
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
DESCRIPTION:
BY:
DATE:
Information for this Presentation:
DATE: 3/13/2013
Type Your Questions Here
Webinar Title and ID Code
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
SCALE: No Scale: SHEET:
01-2
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
BY: DESCRIPTION: NO. SHEET TITLE:
What's Included
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
PROJECT DESCRIPTION:
952-236-4427
1. Introduction to Chief Architect 2D CAD tools 2. Learn to think in terms of CAD -- X, Y, Z 3. Everything you draw is based on CAD polylines 4. Review of common CAD tools 5. Edit behaviors - how things act on the screen 6. Other tools 7. Group CAD items 8. CAD tools used regularly 9. Point & snap tools 10. CAD - Defaults 11. Drawing in a CAD Detail Window 12. Point to Point Snaps 13. Shaping CAD polyline boxes 14. Trim and Extend Tools 15. Working with Angles in CAD 16. Miscellaneous CAD functions 17. Q&A
DATE:
What We'll be Covering In This Webinar
DATE: 3/13/2013 SCALE: No Scale: SHEET:
01-3
Introduction to Chief's CAD Tools DESCRIPTION:
7"
10'-0"
Open Saved Camera
ROOF LINES ABOVE
GLASS RAILING
16'-0" 8'-0"
8" x 8" Concrete Rim Beam 4 - 1/2" ReeBar
8'-0" METAL RAILING
11'-10"
15'-2"
1" 3'-11"
5'-7"
4'-1"
21070
2'-6 1/2"
21'-2"
2'-4"
3050DC
3070
3'-9"
8'-1"
12'-8"
BEDROOM
10'-4"
2670
2670
6070
8'-0"
30" x 30" x 36" Concrete Footings 4 - 1/2" ReeBar
8" Concrete Walls 1/2" ReeBar 8" x 8" Coating for Cistern (TBD)
24" x 18" Concrete Footings 4 - 1/2" ReeBar 30" x 30" Pad Footings (Per Plan) Tie ReeBar Together from Pad to Trench Footings
General Notes: 1) Concrete strength - minimum 3750 psi at 28 days. 2) Concrete cover: a) Slab - Top cover at 1 1/2" Slab - Bottom cover 1 1/2" b) Columns - 2" Cover 3) All reinforcing steel are HT (High Tensile) bars. 4) 2" Cover on all Metal in Columns and Pillars
5" Concrete Roof 1/2" ReeBar 8" x 8" Coating for Cistren (TBD)
Adjust Footings to Grade
30" x 30" x 18" Concrete Footings 4 - 1/2" ReeBar
The Pad Footings for all posts are to be 30" X 30" X 18" Concete with ReeBar and the top of the Pad Footing should be 4' below grade
4'-0"
3. Drawing in CAD Detail Windows
4. Drawing on The Layout Pages
952-236-4427
Adding CAD Details
5"
3'-0 15/16"
e) bars.
Rename to Organize
24'-1"
10'
2" COVER ON ALL METAL IN COLUMNS AND PILLARS
50'
Footing Sizes Floor Thicknesses Wall Finish Roof Slope - How is it done Drains To Cistern Cap on Parapet wall Stairs to Roof - How many treads
3'-4 3/4"
5"
10'
6"
9'-6"
24" x 18" Concrete Footings 4 - 1/2" ReeBar
Adjust all Footing Depths to Grade
-2"
5'-4"
8" x 8" Concrete Rim Beam 4 - 1/2" ReeBar
CISTERN
DINING
BATH
5" Concrete Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
5"
5" PVC Drain Tile Drain to Daylight
5'-10"
1'-0"
5'-1 1/2"
8'-5"
7'-0"
5" Concrete Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
2'-9"
8" x 8" Concrete Block Walls Metal Reinforcing To Code 1/2" ReeBar In Cavities 32" OC
5070
3'-8"
8'-0"
5'-7"
30" x 30" x 18" Concrete Footings 4 - 1/2" ReeBar
5'-10"
2668
6'-0"
8" x 12" Concrete Pillar W/ Beveled Top 4 - 5/8" ReeBar
10'-0"
50'-0"
12'-0"
12'-3"
4'-3"
2068
2'-3"
2570
4'-0"
Glass Railings (TBD)
Embeded Beam
Concrete Steps (TBD)
14'-4"
2670
2670
11'-8"
2670 2670
6'-8"
LINEN
5070
STUDY
Embeded Beam
12" Concrete Columns 6 - 5/8" ReeBar 12" OC Stirpus
8" x 12" Concrete Rim Beam 4 - 1/2" ReeBar
CLOSET
HALL
4'-0"
13'-8"
36" x 6" Embeded Concrete Beam 5/8" ReeBar (See Specs)
2670
2670
7"
MASTER BATH
8'-8"
4'-5" 2436SC
11'-7"
7'-2"
1'-6"
BATH
6" Concrete Patio Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
2" x 4" Treated Framing on Non-Concrete Walls
8" x 6" Concrete Headers Above Windows and Doors 2 - 1/2" ReeBar
UP
HALL
BATH
9'-7"
50'-0"
17'-4"
D/W
HALL
Embeded Beam
8" x 12" Concrete Rim Beam 4 - 1/2" ReeBar
CLOSET KITCHEN
3'-3"
Embeded Beam
Railings (TBD)
7"
2'-5"
3040DC
5'-0"
2070
ROOF PLATFORM
17'-0"
15'-0" DN
2670
LINEN
5'-1"
Embeded Beam
6"
8'-3"
6'-0" 2'-1"
6" Concrete Patio Floor 1/2" ReeBar 8" x 8" 1-1/2" Bottom Cover
3'-3"
3'-8"
5'-0"
CLOSET
12" Concrete Columns 6 - 5/8" ReeBar 12" OC Stirpus
3'-3"
3050DC
2'-0"
4'-0"
1"
Roof Coating - (TBD) 6" Concrete Roof 1/2" ReeBar 8" x 8" OC
3'-8"
7'-3 1/4"
6'-0"
2'-1"
4'-4"
2'-7" 8'-4"
7'-8"
16'-5"
4'-0"
8" x 24" Concrete Wall Reinforcement Pillars 4 - 5/8" ReeBar
Roof Coating - (TBD) 5" Concrete Roof 1/2" ReeBar 8" x 8" OC
6"
3050DC
3050DC
7'-10"
MASTER BDRM
3050DC
15'-8"
LIVING BEDROOM
6070
8'-6"
Roof Coating - (TBD) 5" Concrete Roof 1/2" ReeBar 8" x 8" OC
3'-8"
3'-6"
7"
10070
3'-1"
1'-8"
9'-0" 18070
10'-0"
11'-4"
NO.
22'-0" 6'-8"
6070
10'-7"
14'-0" 7'-4"
Roof Coating - (TBD) 5" Concrete Roof 11 Guage Wire Mesh
8" x 16" Concrete Rim Beam 6 - 1/2" ReeBar
11'-2"
52'-0"
You Can Use the CAD Tools In all Views Except the 3D Cameras
16'-0"
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
19'-0"
19'-5"
20'-1"
16'-0"
PROJECT DESCRIPTION:
9
BY:
2. Drawing in Saved Camera Views
9
17'-2"
SHEET TITLE:
1. Drawing on Floorplans
DATE:
Where Do You Use The 2D CAD Tools in Chief
4" DRAIN TILE
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
DATE: 3/13/2013 SCALE: No Scale: SHEET:
01-4
SHEET TITLE:
Y = Top to ‐Bottom of Screen
3. Drawing in CAD Detail Windows
952-236-4427
PROJECT DESCRIPTION:
Z = Up and ‐Down or Front to ‐Back on your Screen
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
X = ‐Left and Right on Screen
Think in terms of CAD program not house building program
NO.
Use Transform/Replicate Object
DESCRIPTION:
BY:
Thinking in Terms of CAD will make your drawing process go faster
DATE:
Learn to Think in terms of CAD ‐ X, Y, Z
DATE: 3/13/2013 SCALE:
Chief is a CAD Program © 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
SHEET:
01-5
Ceiling Boxes Floor Boxes
Windows Are Many Boxes Molding Polyline Boxes
Slab Boxes
All 3D Elements Are Based On Polylines
952-236-4427
PROJECT DESCRIPTION:
Convert Polyline
Footing Boxes
SHEET TITLE:
Wall Boxes
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
Everything Starts With A CAD Polyline
Everything you draw is based on a Polyline or Polyline Shape
NO.
Slab Boxes
BY:
Overhang a Combination of Boxes
Roof Boxes at an Angle
DESCRIPTION:
3D Item in a Box
DATE:
Everything in Chief is Based on CAD Polylines
DATE: 3/13/2013
Virtually All 2D CAD Items can be Converted to 3D
All Items In Chief Start As a CAD Polyline
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
SCALE:
SHEET:
01-6
Overview of the CAD Items in Chief Fillet Box and Polyline Corners
Polyline Box and Shapes
Concentric Jump Tool and CAD Settings Arc Placement Tools (hint: It's Easy to Convert a Line to an Arc)
Minimize, Close
SHEET TITLE:
CAD Defaults
Marquee Tools
NO.
Spline Tool
DESCRIPTION:
Circles and Ovals
BY:
Fillet Box and Polyline Corners
Point Tool
Bumping/Pushing
Convert View to a CAD Detail
Grid Snaps On/Off All Snaps On/Off
Set Current CAD Drawing Layer
Color On/Off
Show Sheet OnScreen Line Weight On/Off Print Preview
PROJECT DESCRIPTION:
Angle Snaps On/Off
952-236-4427
Store all Plan CAD Details Here
Overview of the Interface
Arc Tools ‐ (hint: Convert Line)
DATE:
Fillet Box and Polyline Corners
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
Polyline Tool
Temp Dimensions On/Off
Edit Polyline Parts The EDIT Toolbar (See Next Page)
Edit Polyline Parts Reference Grid On/Off
DATE: 3/13/2013 SCALE:
Plan Info, Coordinates SHEET:
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
01-7 No Scale:
Copy and Copy in Place
Transform Replicate SHEET TITLE:
Multiple Copy
Make Parallel/Perpendicular Point to Point Snap
Overview of the Interface tools when you Select something
NO.
DESCRIPTION:
BY:
DATE:
Overview of the Edit Toolbar
Center Selected
Move Item To Front Break CAD Line (3) Trim Items (Use Fence) Extend items (Use Fence) Turn CAD Lines into Splines
Alignment and Distribute Tools
952-236-4427
PROJECT DESCRIPTION:
Reflect About Object
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
Add To Library
Plan Info, Coordinates Polyline Union (Make Outline) Polyline Union (Leave Middle) Polyline Union (Leave Edge)
Convert CAD Items Make CAD Box Cloud Object
Convert Line to Arc/Arc to Line
Chamfer Inside and Outside Corner Fillet Outside and Inside Corner, Join Ends, Remove Points Layer Properties For Selected Item
DATE: 3/13/2013 SCALE:
Record WalkThrough Along Path SHEET:
Draw Shape and Make Fence
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
01-8 No Scale:
DESCRIPTION:
BY:
DATE:
Selecting and Grouping Items
Naming a CAD Block
Group Selecting saves time Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
PROJECT DESCRIPTION:
Purge CAD Block to Reduce File Size and Increase Plan Speed
952-236-4427
Select All = Space Bar
Select Icon, Hold Shift Key and Marquee Select Those Items
SHEET TITLE:
NO.
Select Icon To Be Part of Specific Marque Select
Preferences ‐ Edit DATE: 3/13/2013 SCALE:
SHEET:
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
01-9
DESCRIPTION:
BY:
DATE:
Putting It all Together to Create a Cross Section
10"
8'-1 1/8"
16'-5 5/8"
3'-10"
8'-1 1/8"
10'-7 7/8"
11'-4"
1'-5"
3'
3'-6"
3'-6"
SHEET TITLE:
3'-6"
7 1/2"
03 Room Addition tied into 2 Story House
Cross Section From Scratch with the 2D CAD Tools
Using the Tools to Create a Section
Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
PROJECT DESCRIPTION:
6'-8"
952-236-4427
NO.
15'-7 3/4"
3"
121 1/8''
125 1/8'' 0" FLOOR HEIGHT
431 1/8''
176''
176''
164''
585 7/16''
12'' 115 7/8''
12''
2 1/4''
109 1/8''
125 5/8''
18 3/4''
2 1/4''
10'-4"
2'-10"
176''
176''
2'-10"
175 1/4''
127 1/8'' 303 7/8''
431 1/8''
17'
DATE:
303 7/8''
17'
3/4''
7'-11"
10'-7"
10'-7 1/4"
1'-6"
10'-7 1/4"
1'-6"
0" FLOOR HEIGHT
Creating an Info Section © 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
3/13/2013 SCALE:
SHEET:
01-10
If you need help, I'm there for you! Mastering Chief Architect X5 Session 3 of 14 by: Dan Baumann
952-236-4427
Can You Tell What's Being Built Here?
PROJECT DESCRIPTION:
SHEET TITLE:
NO.
DESCRIPTION:
BY:
DATE:
Thanks for Attending ‐ Now It's Time for Q&A
DATE: 3/13/2013 SCALE:
SHEET:
© 2013 ChiefExperts.com All Rights Reserved. Printing for personal use is acceptable. Distribution and Reproduction for others is prohibited without written permission from ChiefExperts.com, Inc.
01-11
