cimarron dc cr1d - Hubbell Outdoor Lighting
CIMARRON DC CR1D
Cat.# Type
Job
Approvals
SOLAR LED
PRODUCT IMAGE(S)
SPECIFICATIONS Intended Use: The LED CR1 unit is used with Hubbell Lighting’s solar lighting package. This DC unit is powered by the solar panel and battery that is custom designed for your location. Typical applications include roadway, parking, area and perimeter lighting.
LED: • A 30LED light engine provides standard IES distributions of Type II, III, IV, V square with up to 86 LPW efficiency • Each LED has individual optical lens so every source contributes to the same IES pattern
Features: • Solid State/Light Emitting Diode (LED) light source • 12V DC electronic dimming driver(s) • Die-cast aluminum housing with multiple pole and surface mounting configurations • Lektrocote® finish with 2 standard and custom colors available • IP-65 LED light engine assembly and driver(s) • U.S. Patent No. D556,935
Electrical: Units are available in 35w, 50w, and 70w configurations; 12V DC input current (see performance data table for details)
Construction: Die-cast aluminum housing provides light weight, yet durable protection; Access to driver from two screws and hinged door for both mounting and wiring
DIMENSIONS 16.0" 16.0" mm 406.4 16.0" 406.4 mm 406.4 mm
Operating Temperature: Units are designed to operate from -35˚ C to 40˚ C ambient Installation: CR1 fixtures feature straight arm mounting or optional mast arm fitter to 2 3/8” OD pipe, suitable for use in wet locations. EPA = 1.2 ft2
21.75" 21.75" 522.5 mm 21.75" 522.5 mm 522.5 mm
3.30
6.75" 6.75" mm 171.5 6.75" 171.5 mm 171.5 mm
5.59
6.0" 5.62 6.0" mm 152.4 6.0" 152.4 mm 152.4 mm
Warranty: Five year limited warranty (for more information visit: http://www.hubbelloutdoor.com /resources/warranty/
.83
3.40 1.95 1.16
1.95 3.89
5.625" 5.625" 143.9 mm 5.625" 143.9 mm 143.9 mm STRAIGHT ARM STRAIGHT ARM STRAIGHT ARM 6.313" 6.313" 160.3 mm 6.313" 5.59 160.3 mm 160.3 mm
CERTIFICATIONS/LISTINGS
2.50
3.40 1.95
6.625" 6.625" 168.3 mm 6.625" 168.3 mm 168.3 mm
ORDERING INFORMATION (Must be ordered with Hubbell Lighting solar power assembly and pole) ORDERING EXAMPLE: CR1-A-30LD-4K-2-035-DB
CR1D
1.95 3.89
5.62
1.16
MAST ARM FITTER ARM OPTION UPSWEPT UPSWEPT ARM UPSWEPT ARM
7.25" 7.25" mm 184.2 7.25" 184.2 mm 184.2 mm
8.625" 8.625" 219 mm 8.625" 219 mm 219 mm
30LD
WALL BRACKET STRAIGHT ARM WALL BRACKET STRAIGHT ARM WALL BRACKET STRAIGHT ARM
SERIES CR1D Solar Cimarron
MOUNTING A Arm mount (6”
straight rigid arm included & acceptable for 90˚ configurations)
NUMBER OF LEDS/VOLTAGE 30LD 30 LEDs, 12V DC
CCT 4K 4000K
nominal
5K 5000K
nominal
IES DISTRIBUTION 2 3 4 5
Type II Type III Type IV Type V
DRIVE CURRENT 7.563"
7.563" 350 mA (35w) 0357.563" 192 mm 192 mm 192 mm 052 525 mA (50w) 8.625" 070 700 mA (71w)
8.625" 219 mm 8.625" 219 mm 219 mm
MAF Mast arm fitter
FINISH DB Dark Bronze GR Gray
WALL MOUNT UPSWEPT ARM WALL MOUNT UPSWEPT ARM WALL MOUNT UPSWEPT ARM
for 2 3/8” OD horizontal arm
Spaulding Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2014 SPAULDING LIGHTING, All Rights Reserved • For more information visit our website: www.spauldinglighting.com • Printed in USA CIMARRONLEDSOLAR-SPEC 6/14
PHOTOMETRICS Catalog Number
IES Report CR1D-30LD-5K.IES
CR1D-30LD-5K
PROJECTED LUMEN MAINTENANCE
ELECTRICAL DATA # OF LEDS 30
DRIVE CURRENT INPUT VOLTAGE SYSTEM POWER (mA) (V) (w) (350mA) 12 35 (525mA) 12 50 (700mA) 12 69
OPERATING HOURS Lumen Maintenance Factor5
CURRENT (Amps) 2.8 4.2 5.8
0
25,000
TM-21-11 L93 45,600
1.0
–
.93
L70 50,000 100,000 290,000 –
–
.70
Data references the extrapolated performance projections for the CR1D-30LD-5K base model in a 40˚C ambient based on 10,000 hours of LED testing per IESNA LM-80-08.
PERFORMANCE DATA # OF LEDS
DRIVE DIST. CURRENT TYPE 2 3 350mA
4 5 2 3
30
525mA 4 5 2 3 700mA 4 5
LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) CCT 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K
LUMENS 2418 2678 2446 2709 2490 2758 2618 2899 3399 3764 3438 3808 3316 3673 3679 4074 4171 4619 4220 4673 4070 4507 4515 5000
B U BACKLIGHT UPLIGHT 1 0 1 0 1 0 1 0 1 2 1 2 2 1 2 1 1 0 1 0 1 0 1 0 1 1 1 1 3 1 3 1 1 0 1 0 1 0 1 0 1 1 1 1 3 1 3 1
G GLARE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1
LPW 72 80 73 81 74 82 78 86 69 77 70 78 68 75 75 83 61 68 62 69 60 66 66 73
AMBIENT TEMPERATURE 0˚ C 32˚ F 10˚ C 50˚ F 20˚ C 68˚ F 25˚ C 77˚ F 30˚ C 86˚ F 40˚ C 104˚ F 50˚ C 122˚ F
LUMEN MULTIPLIER 1.02 1.01 1.00 1.00 1.00 0.99 0.98
Use these factors to determine relative lumen output for average ambient temperatures from 0-50˚C (32-122˚F).
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08.
Spaulding Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2014 SPAULDING LIGHTING, All Rights Reserved • For more information visit our website: www.spauldinglighting.com • Printed in USA CIMARRONLEDSOLAR-SPEC 6/14
POLE & MOUNTING BRACKET INFORMATION POLE FEATURES: (Ordered Separately) • Round Straight Steel (RSS) construction standard, Round Straight Aluminum (RSA) available. Consult factory for engineering design assistance • Anchor base installation standard, direct embedment available • One-piece construction shaft • Side arm mounting standard Pole Selection
Catalog Number
Fixture mounting height 14’ RSS-18-50-7-XX-XX RSS-18-60-3-XX-XX Fixture mounting height 16’ RSS-20-50-7-XX-XX RSS-20-60-3-XX-XX Fixture mounting height 18’ RSS-22-50-7-XX-XX RSS-22-60-3-XX-XX Fixture mounting height 21’ RSS-25-50-7-XX-XX RSS-25-60-3-XX-XX 1 Note:
Pole Ht.
Wind Load Rating1 Nominal Shaft 70 80 90 100 Dim. MPH MPH MPH MPH
• Ground lug standard • Galvanized anchor bolts and template included for anchor base installation (4-bolt design) • Square base cover standard • Gasketed hand hole cover standard (3”x5”) at pole base • Lektrocote® finish with 2 standard and custom colors available Wall Thick.
Bolt Circle Bolt Circle Bolt Sq. (Sug.)
Base Plate (sq.)
Anchor Bolt Size
Bolt Prj.
Pole Wt (lbs)
ft
m
18 18
5.49 5.49
5" 6"
21.3 45.0
16.0 39.0
12.6 29.7
10.1 24.0
.179" .259"
11" 11"
8 - 11" 9 - 11"
5.7 - 7.7" 6.4 - 7.7"
10.25 x 1" 10.25 x 1"
3/4 x 30 x 3" 3/4 x 30 x 3"
4" 4"
190 322
20 20
6.10 6.10
5" 6"
18.2 40.0
13.5 32.0
10.5 26.0
8.4 21.0
.179" .259"
11" 11"
8 - 11" 9 - 11"
5.7 - 7.7" 6.4 - 7.7"
10.25 x 1" 10.25 x 1"
3/4 x 30 x 3" 3/4 x 30 x 3"
4" 4"
210 322
22 22
6.71 6.71
5" 6"
15.5 37.0
11.3 28.7
8.8 22.7
7.0 18.4
.179" .259"
11" 11"
8 - 11" 9 - 11"
5.7 - 7.7" 6.4 - 7.7"
10.25 x 1" 10.25 x 1"
1 x 36 x 4" 1 x 36 x 4"
4" 4"
260 399
25 25
7.62 7.62
5" 6"
12.3 31.0
8.8 24.0
6.7 19.0
5.2 15.3
.179" .259"
11" 11"
8 - 11" 9 - 11"
5.7 - 7.7" 6.4 - 7.7"
10.25 x 1" 10.25 x 1"
1 x 36 x 4" 1 x 36 x 4"
4" 4"
260 399
Allowable EPA with 1.3 gust factor; To determine maximum pole loading weight, multiply allowable EPA by 30 lbs; Example: RSS-20-40-3 pole in 80 MPH zone = 240 lbs (8.0 x 30); Published allowable EPA values based upon calculations of Spaulding Lighting; Allowable EPA values for projects requiring AASHTO methodology are available upon request Factory supplied template must be used when setting anchor bolts; Hubbell Lighting will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts
ORDERING EXAMPLE: RSS-18-50-7-
A2
-
MOUNTING TYPE A2 Single arm, #2 arm hole pattern for
Cimarron with 6” straight rigid arm1
SA6 Solar PV pole, single arm #6 arm
DB FINISH DB Bronze GR Gray
hole pattern for ARM16 and RA series mast arms1
1 Round pole adapter required. Order separately
BRACKETS & ADAPTERS Bracket Selection
Catalog Number
Description
ARM-16-11 21” Straight horizontal mast arm, 2 3/8” OD ARM-16-31 21” Straight horizontal mast arm, 2 3/8” OD RA-4P-M51-W1 48” upswept horizontal mast arm, 2 3/8” OD with 13 1/4” upsweep RA-4P-M53-W1 48” upswept horizontal mast arm, 2 3/8” OD with 13 1/4” upsweep RA-6P-M51-W1 72” upswept horizontal mast arm, 2 3/8” OD with 21 7/8” upsweep RA-6P-M53-W1 72” upswept horizontal mast arm, 2 3/8” OD with 21 7/8” upsweep RSD-05-1 Round pole adapter for ARM & RA Series Mast Arms (nominal 5-6”) RSD-05-3 Round pole adapter for ARM & RA Series Mast Arms (nominal 5-6”) 1 Round pole adapter required. Order separately
21”
Color Dark Bronze Gray Dark Bronze Gray Dark Bronze Gray Dark Bronze Gray
ARM-16-X
Arm Figu -16 re #- 72” 48” 1
RA-4P / RA-6P
SOLAR ELECTRIC POWER INFORMATION SOLAR ELECTRIC POWER ASSEMBLY FEATURES: (Ordered Separately) • The solar electric power assembly features one to five solar panel(s) mechanically fastened to the aluminum power bracket. Bracket and power assembly field installed directly to minimum 5” OD round pole or wall • The multi Amp hour GEL battery/batteries (1-4) are contained within a vented aluminum battery box (1-2) and includes a wiring harness and control electronics (5-7 years battery life expectancy) • There are multiple controllers to chose for different types of applications such as dusk-to-dawn activated, motion detector, etc. • The systems are built for easy installation with quick connect terminals and can be mounted to a wall, roof or pole • Every system is available to produce DC or AC power depending on the needs of the device • Meets AASHTO 150 mph wind force ratings • Powder coating and custom design available
RA-4P / RA-6P Figure #2
Shown with solar panel assembly produced by Sepco™ including optional gray finish on power assembly.
Spaulding Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2014 SPAULDING LIGHTING, All Rights Reserved • For more information visit our website: www.spauldinglighting.com • Printed in USA CIMARRONLEDSOLAR-SPEC 6/14
Cat.# Type
Job
Approvals
SOLAR LED
PRODUCT IMAGE(S)
SPECIFICATIONS Intended Use: The LED CR1 unit is used with Hubbell Lighting’s solar lighting package. This DC unit is powered by the solar panel and battery that is custom designed for your location. Typical applications include roadway, parking, area and perimeter lighting.
LED: • A 30LED light engine provides standard IES distributions of Type II, III, IV, V square with up to 86 LPW efficiency • Each LED has individual optical lens so every source contributes to the same IES pattern
Features: • Solid State/Light Emitting Diode (LED) light source • 12V DC electronic dimming driver(s) • Die-cast aluminum housing with multiple pole and surface mounting configurations • Lektrocote® finish with 2 standard and custom colors available • IP-65 LED light engine assembly and driver(s) • U.S. Patent No. D556,935
Electrical: Units are available in 35w, 50w, and 70w configurations; 12V DC input current (see performance data table for details)
Construction: Die-cast aluminum housing provides light weight, yet durable protection; Access to driver from two screws and hinged door for both mounting and wiring
DIMENSIONS 16.0" 16.0" mm 406.4 16.0" 406.4 mm 406.4 mm
Operating Temperature: Units are designed to operate from -35˚ C to 40˚ C ambient Installation: CR1 fixtures feature straight arm mounting or optional mast arm fitter to 2 3/8” OD pipe, suitable for use in wet locations. EPA = 1.2 ft2
21.75" 21.75" 522.5 mm 21.75" 522.5 mm 522.5 mm
3.30
6.75" 6.75" mm 171.5 6.75" 171.5 mm 171.5 mm
5.59
6.0" 5.62 6.0" mm 152.4 6.0" 152.4 mm 152.4 mm
Warranty: Five year limited warranty (for more information visit: http://www.hubbelloutdoor.com /resources/warranty/
.83
3.40 1.95 1.16
1.95 3.89
5.625" 5.625" 143.9 mm 5.625" 143.9 mm 143.9 mm STRAIGHT ARM STRAIGHT ARM STRAIGHT ARM 6.313" 6.313" 160.3 mm 6.313" 5.59 160.3 mm 160.3 mm
CERTIFICATIONS/LISTINGS
2.50
3.40 1.95
6.625" 6.625" 168.3 mm 6.625" 168.3 mm 168.3 mm
ORDERING INFORMATION (Must be ordered with Hubbell Lighting solar power assembly and pole) ORDERING EXAMPLE: CR1-A-30LD-4K-2-035-DB
CR1D
1.95 3.89
5.62
1.16
MAST ARM FITTER ARM OPTION UPSWEPT UPSWEPT ARM UPSWEPT ARM
7.25" 7.25" mm 184.2 7.25" 184.2 mm 184.2 mm
8.625" 8.625" 219 mm 8.625" 219 mm 219 mm
30LD
WALL BRACKET STRAIGHT ARM WALL BRACKET STRAIGHT ARM WALL BRACKET STRAIGHT ARM
SERIES CR1D Solar Cimarron
MOUNTING A Arm mount (6”
straight rigid arm included & acceptable for 90˚ configurations)
NUMBER OF LEDS/VOLTAGE 30LD 30 LEDs, 12V DC
CCT 4K 4000K
nominal
5K 5000K
nominal
IES DISTRIBUTION 2 3 4 5
Type II Type III Type IV Type V
DRIVE CURRENT 7.563"
7.563" 350 mA (35w) 0357.563" 192 mm 192 mm 192 mm 052 525 mA (50w) 8.625" 070 700 mA (71w)
8.625" 219 mm 8.625" 219 mm 219 mm
MAF Mast arm fitter
FINISH DB Dark Bronze GR Gray
WALL MOUNT UPSWEPT ARM WALL MOUNT UPSWEPT ARM WALL MOUNT UPSWEPT ARM
for 2 3/8” OD horizontal arm
Spaulding Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2014 SPAULDING LIGHTING, All Rights Reserved • For more information visit our website: www.spauldinglighting.com • Printed in USA CIMARRONLEDSOLAR-SPEC 6/14
PHOTOMETRICS Catalog Number
IES Report CR1D-30LD-5K.IES
CR1D-30LD-5K
PROJECTED LUMEN MAINTENANCE
ELECTRICAL DATA # OF LEDS 30
DRIVE CURRENT INPUT VOLTAGE SYSTEM POWER (mA) (V) (w) (350mA) 12 35 (525mA) 12 50 (700mA) 12 69
OPERATING HOURS Lumen Maintenance Factor5
CURRENT (Amps) 2.8 4.2 5.8
0
25,000
TM-21-11 L93 45,600
1.0
–
.93
L70 50,000 100,000 290,000 –
–
.70
Data references the extrapolated performance projections for the CR1D-30LD-5K base model in a 40˚C ambient based on 10,000 hours of LED testing per IESNA LM-80-08.
PERFORMANCE DATA # OF LEDS
DRIVE DIST. CURRENT TYPE 2 3 350mA
4 5 2 3
30
525mA 4 5 2 3 700mA 4 5
LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) CCT 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K 4000K 5000K
LUMENS 2418 2678 2446 2709 2490 2758 2618 2899 3399 3764 3438 3808 3316 3673 3679 4074 4171 4619 4220 4673 4070 4507 4515 5000
B U BACKLIGHT UPLIGHT 1 0 1 0 1 0 1 0 1 2 1 2 2 1 2 1 1 0 1 0 1 0 1 0 1 1 1 1 3 1 3 1 1 0 1 0 1 0 1 0 1 1 1 1 3 1 3 1
G GLARE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1
LPW 72 80 73 81 74 82 78 86 69 77 70 78 68 75 75 83 61 68 62 69 60 66 66 73
AMBIENT TEMPERATURE 0˚ C 32˚ F 10˚ C 50˚ F 20˚ C 68˚ F 25˚ C 77˚ F 30˚ C 86˚ F 40˚ C 104˚ F 50˚ C 122˚ F
LUMEN MULTIPLIER 1.02 1.01 1.00 1.00 1.00 0.99 0.98
Use these factors to determine relative lumen output for average ambient temperatures from 0-50˚C (32-122˚F).
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08.
Spaulding Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2014 SPAULDING LIGHTING, All Rights Reserved • For more information visit our website: www.spauldinglighting.com • Printed in USA CIMARRONLEDSOLAR-SPEC 6/14
POLE & MOUNTING BRACKET INFORMATION POLE FEATURES: (Ordered Separately) • Round Straight Steel (RSS) construction standard, Round Straight Aluminum (RSA) available. Consult factory for engineering design assistance • Anchor base installation standard, direct embedment available • One-piece construction shaft • Side arm mounting standard Pole Selection
Catalog Number
Fixture mounting height 14’ RSS-18-50-7-XX-XX RSS-18-60-3-XX-XX Fixture mounting height 16’ RSS-20-50-7-XX-XX RSS-20-60-3-XX-XX Fixture mounting height 18’ RSS-22-50-7-XX-XX RSS-22-60-3-XX-XX Fixture mounting height 21’ RSS-25-50-7-XX-XX RSS-25-60-3-XX-XX 1 Note:
Pole Ht.
Wind Load Rating1 Nominal Shaft 70 80 90 100 Dim. MPH MPH MPH MPH
• Ground lug standard • Galvanized anchor bolts and template included for anchor base installation (4-bolt design) • Square base cover standard • Gasketed hand hole cover standard (3”x5”) at pole base • Lektrocote® finish with 2 standard and custom colors available Wall Thick.
Bolt Circle Bolt Circle Bolt Sq. (Sug.)
Base Plate (sq.)
Anchor Bolt Size
Bolt Prj.
Pole Wt (lbs)
ft
m
18 18
5.49 5.49
5" 6"
21.3 45.0
16.0 39.0
12.6 29.7
10.1 24.0
.179" .259"
11" 11"
8 - 11" 9 - 11"
5.7 - 7.7" 6.4 - 7.7"
10.25 x 1" 10.25 x 1"
3/4 x 30 x 3" 3/4 x 30 x 3"
4" 4"
190 322
20 20
6.10 6.10
5" 6"
18.2 40.0
13.5 32.0
10.5 26.0
8.4 21.0
.179" .259"
11" 11"
8 - 11" 9 - 11"
5.7 - 7.7" 6.4 - 7.7"
10.25 x 1" 10.25 x 1"
3/4 x 30 x 3" 3/4 x 30 x 3"
4" 4"
210 322
22 22
6.71 6.71
5" 6"
15.5 37.0
11.3 28.7
8.8 22.7
7.0 18.4
.179" .259"
11" 11"
8 - 11" 9 - 11"
5.7 - 7.7" 6.4 - 7.7"
10.25 x 1" 10.25 x 1"
1 x 36 x 4" 1 x 36 x 4"
4" 4"
260 399
25 25
7.62 7.62
5" 6"
12.3 31.0
8.8 24.0
6.7 19.0
5.2 15.3
.179" .259"
11" 11"
8 - 11" 9 - 11"
5.7 - 7.7" 6.4 - 7.7"
10.25 x 1" 10.25 x 1"
1 x 36 x 4" 1 x 36 x 4"
4" 4"
260 399
Allowable EPA with 1.3 gust factor; To determine maximum pole loading weight, multiply allowable EPA by 30 lbs; Example: RSS-20-40-3 pole in 80 MPH zone = 240 lbs (8.0 x 30); Published allowable EPA values based upon calculations of Spaulding Lighting; Allowable EPA values for projects requiring AASHTO methodology are available upon request Factory supplied template must be used when setting anchor bolts; Hubbell Lighting will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts
ORDERING EXAMPLE: RSS-18-50-7-
A2
-
MOUNTING TYPE A2 Single arm, #2 arm hole pattern for
Cimarron with 6” straight rigid arm1
SA6 Solar PV pole, single arm #6 arm
DB FINISH DB Bronze GR Gray
hole pattern for ARM16 and RA series mast arms1
1 Round pole adapter required. Order separately
BRACKETS & ADAPTERS Bracket Selection
Catalog Number
Description
ARM-16-11 21” Straight horizontal mast arm, 2 3/8” OD ARM-16-31 21” Straight horizontal mast arm, 2 3/8” OD RA-4P-M51-W1 48” upswept horizontal mast arm, 2 3/8” OD with 13 1/4” upsweep RA-4P-M53-W1 48” upswept horizontal mast arm, 2 3/8” OD with 13 1/4” upsweep RA-6P-M51-W1 72” upswept horizontal mast arm, 2 3/8” OD with 21 7/8” upsweep RA-6P-M53-W1 72” upswept horizontal mast arm, 2 3/8” OD with 21 7/8” upsweep RSD-05-1 Round pole adapter for ARM & RA Series Mast Arms (nominal 5-6”) RSD-05-3 Round pole adapter for ARM & RA Series Mast Arms (nominal 5-6”) 1 Round pole adapter required. Order separately
21”
Color Dark Bronze Gray Dark Bronze Gray Dark Bronze Gray Dark Bronze Gray
ARM-16-X
Arm Figu -16 re #- 72” 48” 1
RA-4P / RA-6P
SOLAR ELECTRIC POWER INFORMATION SOLAR ELECTRIC POWER ASSEMBLY FEATURES: (Ordered Separately) • The solar electric power assembly features one to five solar panel(s) mechanically fastened to the aluminum power bracket. Bracket and power assembly field installed directly to minimum 5” OD round pole or wall • The multi Amp hour GEL battery/batteries (1-4) are contained within a vented aluminum battery box (1-2) and includes a wiring harness and control electronics (5-7 years battery life expectancy) • There are multiple controllers to chose for different types of applications such as dusk-to-dawn activated, motion detector, etc. • The systems are built for easy installation with quick connect terminals and can be mounted to a wall, roof or pole • Every system is available to produce DC or AC power depending on the needs of the device • Meets AASHTO 150 mph wind force ratings • Powder coating and custom design available
RA-4P / RA-6P Figure #2
Shown with solar panel assembly produced by Sepco™ including optional gray finish on power assembly.
Spaulding Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • Phone: 864-678-1000 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2014 SPAULDING LIGHTING, All Rights Reserved • For more information visit our website: www.spauldinglighting.com • Printed in USA CIMARRONLEDSOLAR-SPEC 6/14
