Clean BreakTM/MC - 1Source
Clean Break
TM/MC
Floor Finish Stripper Ultra low odor floor finish stripper that is ideal for use in facilities where odors are a concern. Easy to Use Ecologo certified floor stripper Ultra low odor formula Has no butyl or ammonia
Designed For BSC Education Healthcare Food Service Lodging
For additional information, please contact us at +1 800 558 2332 or at www.diversey.com
Use Overview
Clean Break Floor Finish Stripper is specifically formulated to meet the requirements of Ecologo CCD-147 Hard Floor Care Products standard. Has no butyl or ammonia and will effectively strip zinc-free and conventional finishes. The ultra low odor formula is ideal for use in facilities where odors are a concern. TM/MC
Use Directions Use appropriate personal protective equipment. Dilute product as follows:
Light Build-up of Floor Finishes: Dilute product 1:8 with cold water. Heavy Build-up of Floor Finishes: Dilute product 1:4 with cold water. Blockade areas to be stripped. Floors will be very slippery when stripper is applied. Exercise caution. Apply liberal amounts of solution uniformly to floor with a mop. Start with the edges to give them more soak time. If splashing occurs, wipe off surfaces with a clean rag dampened with water. Let stripper solution soak for 5-10 minutes. Mop agitate to loosen finish or sealer. Re-wet as necessary, do not allow stripper to dry on the floor. Longer soak times may be necessary in cases of extreme buildup.
Hand or machine scrub thoroughly using appropriate pad
or stripping brush. Pick-up all of the solution with a clean mop, wet vac or
automatic scrubber. Mop up any “tracks” left by wet vacs or automatic scrub-
bers before they dry. Thoroughly rinse floor with clean water, using a mop and bucket. Let floor dry completely before applying recommended Diversey brand floor sealer or finish.
Available Items
Product Specifications Description Color/Form
Clear, colorless-light straw liquid
Flash Point
>200˚ F (>93.34˚ C)
pH
12.35 (Concentrate) 11.77 (Use Dilution 1:4)
Scent
Mild Solvent
Shelf Life
2 years
Solubility
Dispersible
Specific Gravity
1.035
Product Code
Description/Package Size
Dilution
5772878
4 x 1 gallon / 3.78 L Containers
1:4 , 1:8
Safety Reminder Please make sure your employees read and understand the product label and Material Safety Data Sheet before using this product. The label contains directions for use, and both the label and MSDS contain hazard warnings, precautionary statements and first aid procedures. MSDS are available on-line at www.diversey.com or by calling 888 352 2249.
Hazard Rating HMIS
Concentrate
NFPA
3
Health
3
0
Flammability
0
0
Reactivity
0
HMIS
Use Dilution 1:4
NFPA
1
Health
1
0
Flammability
0
0
Reactivity
0
4=Very High; 3=High; 2=Moderate; 1=Slight; 0=Insignificant.
ECOLOGO® logo is a certification mark owned by Terra Choice Group, Inc.
For additional information, please contact us at +1 800 558 2332 or at www.diversey.com © 2012 Diversey, Inc., 8310 16th Street, Sturtevant, WI 53177-1964. All Rights Reserved. SPC90238 (12/202)
TM/MC
Floor Finish Stripper Ultra low odor floor finish stripper that is ideal for use in facilities where odors are a concern. Easy to Use Ecologo certified floor stripper Ultra low odor formula Has no butyl or ammonia
Designed For BSC Education Healthcare Food Service Lodging
For additional information, please contact us at +1 800 558 2332 or at www.diversey.com
Use Overview
Clean Break Floor Finish Stripper is specifically formulated to meet the requirements of Ecologo CCD-147 Hard Floor Care Products standard. Has no butyl or ammonia and will effectively strip zinc-free and conventional finishes. The ultra low odor formula is ideal for use in facilities where odors are a concern. TM/MC
Use Directions Use appropriate personal protective equipment. Dilute product as follows:
Light Build-up of Floor Finishes: Dilute product 1:8 with cold water. Heavy Build-up of Floor Finishes: Dilute product 1:4 with cold water. Blockade areas to be stripped. Floors will be very slippery when stripper is applied. Exercise caution. Apply liberal amounts of solution uniformly to floor with a mop. Start with the edges to give them more soak time. If splashing occurs, wipe off surfaces with a clean rag dampened with water. Let stripper solution soak for 5-10 minutes. Mop agitate to loosen finish or sealer. Re-wet as necessary, do not allow stripper to dry on the floor. Longer soak times may be necessary in cases of extreme buildup.
Hand or machine scrub thoroughly using appropriate pad
or stripping brush. Pick-up all of the solution with a clean mop, wet vac or
automatic scrubber. Mop up any “tracks” left by wet vacs or automatic scrub-
bers before they dry. Thoroughly rinse floor with clean water, using a mop and bucket. Let floor dry completely before applying recommended Diversey brand floor sealer or finish.
Available Items
Product Specifications Description Color/Form
Clear, colorless-light straw liquid
Flash Point
>200˚ F (>93.34˚ C)
pH
12.35 (Concentrate) 11.77 (Use Dilution 1:4)
Scent
Mild Solvent
Shelf Life
2 years
Solubility
Dispersible
Specific Gravity
1.035
Product Code
Description/Package Size
Dilution
5772878
4 x 1 gallon / 3.78 L Containers
1:4 , 1:8
Safety Reminder Please make sure your employees read and understand the product label and Material Safety Data Sheet before using this product. The label contains directions for use, and both the label and MSDS contain hazard warnings, precautionary statements and first aid procedures. MSDS are available on-line at www.diversey.com or by calling 888 352 2249.
Hazard Rating HMIS
Concentrate
NFPA
3
Health
3
0
Flammability
0
0
Reactivity
0
HMIS
Use Dilution 1:4
NFPA
1
Health
1
0
Flammability
0
0
Reactivity
0
4=Very High; 3=High; 2=Moderate; 1=Slight; 0=Insignificant.
ECOLOGO® logo is a certification mark owned by Terra Choice Group, Inc.
For additional information, please contact us at +1 800 558 2332 or at www.diversey.com © 2012 Diversey, Inc., 8310 16th Street, Sturtevant, WI 53177-1964. All Rights Reserved. SPC90238 (12/202)
