CNC LATHE 30 Deg. Inclined PE 3040
Phone: 02/ 4322 2339 Fax: 02/ 4322 2403 Mob: 04 14 87 87 11
Email: [email protected] Web: www.panthertrikes.com ABN: 71 108 441 621 Dealers License No. 20536 Unit 7/ 379 Manns Road,
West Gosford
2250
N.S.W.
Australia
CNC LATHE 30 Deg. Inclined PE 3040
Specification
(Unit)
MT3040
Bed incline Cutting length Cutting capacity over bed
° mm mm
30 970 ￠400
Cutting capacity over support
mm
￠450
Chuck size
8” A2-6
Spindle power
KW
7.5
Spindle speeds
rpm
50~3500
Spindle bore
mm
￠52
Through-spindle Draw tube bore
mm
￠45
Rapid feed
m/min
1
X Axis Travel Z Axis Travel Tail stock sleeve Tail stock sleeve travel tail stock travel tail stock taper Positioning accuracy Repeatability accuracy Overall dimension Weight
mm mm mm mm mm
230 1000 ￠65 100 780 MT4 ±0.011 ±0.005 2200x1750x1880 4100
Equipments: Hydr. Chuck, Hydr. Tailstock, 10-pcs Hydr. Turret station, Servo spindle, Chip conveyor (Chain type), Taiwan Spindle, Taiwan Linear guide way Taiwan Screws Bearings, Lubrication (China)
CNC System Options: -GSK 980TA1 / KND100Ti-D (China) -SIEMENS (Germany) -FANUC Oi-Mate TD (Japan)
mm mm mm KG
Terms & Conditions: 12 months warranty on part Manufacturer warrants the products to be free from defects in material and workmanship for 12 months from the date of shipment to the original purchaser only. We will send parts (FREE) for your replacement. If the machine has worse running problems, we will send engineer to your factory for maintenance. Note: All tooling is considered wear items which not covered under machine warranty. Training & Setup: Additional Machine should be place in position and main power connected prior to set up and training at customer site. Customer should pay for travel plus related expenses (may include hotel, airfare and rental car etc).We also welcome customer to send their people her for training on how to operate the machines. Lead time: 3-5 days and customer should pay all relative expenses by themselves. Price are variable based on exchange rate quoted = $ 0.80 Quotation Valid for 30 Days and subject to terms and conditions Delivery Approximately 8-10 weeks from receiving deposit and order Deposit 40% Rest before shipment Freight Ex West Gosford Date 10.02.2015
Offer: Option: 1 1 Panther CNC Lathe 30 Deg. Inclined PE3040 with Frequency Spindle and Fanuc Oi-Mate TD or SINUMERIK 828D Controller AU $ 73,750.00- Incl. GST
Option: 2 1 Panther CNC Lathe 30 Deg. Inclined PE3040 with Servo Spindle and Fanuc Oi-Mate TD or SINUMERIK 828D Controller AU $ 82,150.00- Incl. GST
Hoping This Quote meets your requirements and we can be of assistance in future. Josef Furrer Director
Email: [email protected] Web: www.panthertrikes.com ABN: 71 108 441 621 Dealers License No. 20536 Unit 7/ 379 Manns Road,
West Gosford
2250
N.S.W.
Australia
CNC LATHE 30 Deg. Inclined PE 3040
Specification
(Unit)
MT3040
Bed incline Cutting length Cutting capacity over bed
° mm mm
30 970 ￠400
Cutting capacity over support
mm
￠450
Chuck size
8” A2-6
Spindle power
KW
7.5
Spindle speeds
rpm
50~3500
Spindle bore
mm
￠52
Through-spindle Draw tube bore
mm
￠45
Rapid feed
m/min
1
X Axis Travel Z Axis Travel Tail stock sleeve Tail stock sleeve travel tail stock travel tail stock taper Positioning accuracy Repeatability accuracy Overall dimension Weight
mm mm mm mm mm
230 1000 ￠65 100 780 MT4 ±0.011 ±0.005 2200x1750x1880 4100
Equipments: Hydr. Chuck, Hydr. Tailstock, 10-pcs Hydr. Turret station, Servo spindle, Chip conveyor (Chain type), Taiwan Spindle, Taiwan Linear guide way Taiwan Screws Bearings, Lubrication (China)
CNC System Options: -GSK 980TA1 / KND100Ti-D (China) -SIEMENS (Germany) -FANUC Oi-Mate TD (Japan)
mm mm mm KG
Terms & Conditions: 12 months warranty on part Manufacturer warrants the products to be free from defects in material and workmanship for 12 months from the date of shipment to the original purchaser only. We will send parts (FREE) for your replacement. If the machine has worse running problems, we will send engineer to your factory for maintenance. Note: All tooling is considered wear items which not covered under machine warranty. Training & Setup: Additional Machine should be place in position and main power connected prior to set up and training at customer site. Customer should pay for travel plus related expenses (may include hotel, airfare and rental car etc).We also welcome customer to send their people her for training on how to operate the machines. Lead time: 3-5 days and customer should pay all relative expenses by themselves. Price are variable based on exchange rate quoted = $ 0.80 Quotation Valid for 30 Days and subject to terms and conditions Delivery Approximately 8-10 weeks from receiving deposit and order Deposit 40% Rest before shipment Freight Ex West Gosford Date 10.02.2015
Offer: Option: 1 1 Panther CNC Lathe 30 Deg. Inclined PE3040 with Frequency Spindle and Fanuc Oi-Mate TD or SINUMERIK 828D Controller AU $ 73,750.00- Incl. GST
Option: 2 1 Panther CNC Lathe 30 Deg. Inclined PE3040 with Servo Spindle and Fanuc Oi-Mate TD or SINUMERIK 828D Controller AU $ 82,150.00- Incl. GST
Hoping This Quote meets your requirements and we can be of assistance in future. Josef Furrer Director
