cnc press brakes
APHS
cnc press brakes
CNC SYSTEM DELEM 66W graphical control with full programming and machine control facilites in a user-friendly environment. Main features include:
Delem DA-51 controller
n Programmable multi-axis control.
DESIGN AND OPERATING FEATURES n Ridgly welded, monoblock steel frame for minimum deflection under load up to 330 tons (Models above 330 tons are bolted) n Downstroking bending beam with two cylinders made from high-quality certified forged steel, precisely honed and chrome plated
• Y1-Y2 cylinder axes • X1-X2-R1-R2-Z1-Z2 backgauge axes • CNC crowning axis • Modular expansion for additional axes
n High-memory capacity for program steps and tooling data n High number of product and bend repeat possibility n Direct graphical programming with automatic computation of all axis positions and bend sequence in full graphic simulation
n CNC-controlled backgauge on ballscrew spindles with DC drive and AC servo motor for the best accuracy and speed
n Product programming with direct angle input or in absolute dimensions. For each CNC program and bend sequence, the programmable and/or computed functions include: bending length/thickness, material selection, tooling selection, bend method, mute position, pinching point, press force/ speed, incremental travel and retraction of backgauge, dwell time, delay time for axes re-positioning, decompression stroke/ speed, tilt adjustment, corrections on Y and backgauge axes
n Block-type European hydraulics
n Manual operation of all axes
n Compact-wired electrical box with ventilation
n Teach-in on all axes
n Full conformity with EC Machinery Directive for safety and certified CE marking
n Operator selectable languages
n ST44-2 Certified steel used for components
n Memory storage on USB flashdisk
QUAD TANDEM APHS 59' x 1760 ton
n Real-time Windows system for multi-tasking and file management
n Ram travel fully supported in low friction fiber slideways n Full electronic synchronization with proportional valve technology assuring maximum bend accuracy and reapeatability through constant monitoring and correction of beam parallelism by a CNC system +/- .0004 parallelism and repeatability n Stroke-depth measurement through high-precision linear scales which are bed referenced for the best bending repeatability
n Integrated diagnostic software
ACCESSORIES STANDARD: n Baykal Mechanical crowning n American/European-style top tool holders (American clamps on high tonnages) n Starter tool package consisting of gooseneck punch and multi-vee die block n Two-hand operation console with double foot-switch n Front-arms on linear guides n Electrically-interlocked side and rear guards n 39" Backgauge range OPTIONAL:
Standard controller Delem DA-66W
BACKGAUGE OPTIONS
Optional Cybelec ModEva 10 graphical 3D Windows based colour controller
n (A) Backgauge system with X-axis:
n Manual or power-driven (CNC) crowning tables
n Top tool manual quick-release clamps
• Travel on ballscrew spindles • DC-motor driven • Two mirometric stop-fingers with height and lateral adjustment • Range : 39.3" • Travel speed (max) : 780"/min • Positioning precision : ± .001"
n (B) Backgauge system with X-R axes:
Optional DA-69W graphical 3D Windows based colour controller
• Travel on ballscrew spindles • DC-motor driven • Two mirometric stop-fingers with lateral adjustment • Range X-axis : 39.3" R-axis : 6.3" • Travel speed X-axis : 826"/min (max) R-axis : 567"/min • Positioning X-axis : ± .001" precision R-axis : ± .002"
n Hydraulic tool clamping systems n Programmable sheet following arms n Special tooling for customer applications: • Special-profile top and bottom tools • Single-vee dies with table adapters n F ront light guards or front laser protection for enhanced safety
Sheet following arms
n (C) Additional backgauge axes for special applications:
Optional Cybelec ModEva 12 graphical 3D Windows based colour controller
• X1 - X2 • R1 - R2 • Z1 - Z2
OR
• X1 - X2 • X OR • R • R • Z1 - Z2 • Z1 - Z2
Details of these special backgauge systems are available on request
Front laser protection
Quick release clamps
Baykal CNC crowning
Manual crowning
TECHNICAL DATA
Throat Gap
49" 6'10" 8'6" 8'6" 10'2" 10'2" 10'2" 10'2" 10'2" 10'2" 12'1" 12'1" 12'1" 12'1" 12'1" 13'5" 13'5" 13'5" 13'5' 13"5" 20' 20' 20' 20' 20' 20' 20'
Table Width
307 5,500 307 11,880 307 13,640 307 15.620 307 17,380 307 18,480 307 21,340 307 22,000 283 24.200 236 33,000 307 24,200 307 23,540 283 24,640 260 29,700 236 37,400 283 26,400 260 27,500 236 30,800 212 40,700 165 57,200 236 44,000 236 55,000 165 66,000 165 74,800 165 85,800 165 105.600 165 121,000
Stroke
24 24 24 24 24 24 24 24 24 18 24 24 24 24 18 24 24 24 18 18 24 24 18 18 18 18 16
Daylight Opening
378 354 378 354 378 378 378 354 307 260 401 401 354 330 283 401 378 354 283 189 330 330 283 212 212 189 189
Machine Height
5 7 7 10 10 15 20 25 30 30 15 20 25 30 30 20 25 30 30 40 20 30 30 40 40 40 50
B
C
G
E1
E2
H
K
L
M
N
INCH
INCH
INCH
INCH
INCH
INCH
INCH
INCH
INCH
INCH
3'6" 5'3" 6'8" 8'4" 8'4" 8'4" 8'4" 8'4" 8'4" 8'4" 10'8" 10'8" 10'8" 10'8" 10'8" 11'7" 11'7" 11'7" 11'7" 11'7" 16'8" 16'8" 16'8" 16'8" 16'8" 16'8" 16'8"
58" 62" 62" 63" 63" 63" 63" 63" 63" 71" 64" 63" 63" 63" 72" 63" 63" 63" 72" 88" 77" 77" 81" 87" 88" 93" 94"
– – – – – – – – – – – – – – – – – – – – – – – – – 10" 15"
– – – – – – – – – – – – – – – – – – – – – – – – – 31" 45"
89" 100" 100" 103" 103" 114" 114" 114" 114" 124" 114" 114" 114" 114" 126" 114" 114" 114" 126" 137" 112" 118" 129" 128" 146" 138" 161"
17.9" 18.7" 18.7" 20.8" 20.8" 20.8" 20.8" 20.8" 20.8" 25.9" 20.8" 20.8" 20.8" 20.8" 25" 20.8" 20.8" 20.8" 25" 23.2" 20" 19.6" 22" 22.4" 20.8" 20.8" 21"
8.4" 8.2" 8.2" 10.2" 10.2" 10.2" 10.2" 10.2" 10.2" 12.5" 10.2" 10.2" 10.2" 10.2" 12.5" 10.2" 10.2" 10.2" 12.5" 12.5" 10.2" 10.2" 12.5" 12.5" 12.5" 13.3" 14.1"
31" 35" 35" 35" 35" 35" 35" 35" 35" 36" 34" 35" 35" 35" 38" 35" 35" 35" 38" 43" 39" 43" 44" 43" 43" 32" 43"
Pit Depth
3'6" 5'3" 6'8" 6'8" 8'4" 8'4" 8'4" 8'4" 8'4" 8'4" 10'8" 10'8" 10'8" 10'8" 10'8" 11'7" 11'7" 11'7" 11'7" 11'7" 16'8" 16'8" 16'8" 16'8" 16'8" 16'8" 16'8"
INCH
Bed Height
44 66 66 100 100 132 175 220 265 330 132 175 220 265 330 175 220 265 330 480 175 265 330 420 440 550 665
LBS
A
Side Frame Width
Motor Output HP
Inch/Min Inch/Min Working Return
Inside Frames
Working Length INCH
Inch/Min Approach
Bending Length
Capacity TON
TYPES
APHS 1250 x 40 APHS 2104 x 60 APHS 2604 x 60 APHS 2606 x 90 APHS 3104 x 90 APHS 3106 x 120 APHS 3108 x 160 APHS 3110 x 200 APHS 3112 x 240 APHS 3116 x 300 APHS 3705 x 120 APHS 3706 x 160 APHS 3708 x 200 APHS 3710 x 240 APHS 3712 x 300 APHS 4106 x 160 APHS 4107 x 200 APHS 4109 x 240 APHS 4112 x 300 APHS 4116 x 440 APHS 6104 x 160 APHS 6106 x 240 APHS 6108 x 300 APHS 6110 x 380 APHS 6112 x 440 APHS 6114 x 500 APHS 6116 x 600
Speeds
Approx. Weight
APHS cnc press brakes
2.3" 2.3” 2.3" 2.3" 2.3" 2.3" 2.3" 3.5" 3.5" 15" 2.3" 2.3" 3.5" 3.5" 11" 2.3" 3.5" 3.5” 11" 15" 3.5" 3.5" 8" 9.4" 11" 15" 15"
16" 16" 16" 16" 16” 16" 16” 16" 16" 19.6" 16" 16' 16" 16" 19.6" 16" 16" 16” 19.6" 19.6" 19.6" 19.6" 19.6" 19.6" 19.6" 19.6" 19.6"
Design and specifications are subject to change without notice.
FAB-LINE MACHINERY, LLC
P.O. Box 308, St. Charles, IL 60174 USA Tel 866-466-8298 Fax 630-587-5584 Email [email protected] Web www.fab-line.com
DEALER
cnc press brakes
CNC SYSTEM DELEM 66W graphical control with full programming and machine control facilites in a user-friendly environment. Main features include:
Delem DA-51 controller
n Programmable multi-axis control.
DESIGN AND OPERATING FEATURES n Ridgly welded, monoblock steel frame for minimum deflection under load up to 330 tons (Models above 330 tons are bolted) n Downstroking bending beam with two cylinders made from high-quality certified forged steel, precisely honed and chrome plated
• Y1-Y2 cylinder axes • X1-X2-R1-R2-Z1-Z2 backgauge axes • CNC crowning axis • Modular expansion for additional axes
n High-memory capacity for program steps and tooling data n High number of product and bend repeat possibility n Direct graphical programming with automatic computation of all axis positions and bend sequence in full graphic simulation
n CNC-controlled backgauge on ballscrew spindles with DC drive and AC servo motor for the best accuracy and speed
n Product programming with direct angle input or in absolute dimensions. For each CNC program and bend sequence, the programmable and/or computed functions include: bending length/thickness, material selection, tooling selection, bend method, mute position, pinching point, press force/ speed, incremental travel and retraction of backgauge, dwell time, delay time for axes re-positioning, decompression stroke/ speed, tilt adjustment, corrections on Y and backgauge axes
n Block-type European hydraulics
n Manual operation of all axes
n Compact-wired electrical box with ventilation
n Teach-in on all axes
n Full conformity with EC Machinery Directive for safety and certified CE marking
n Operator selectable languages
n ST44-2 Certified steel used for components
n Memory storage on USB flashdisk
QUAD TANDEM APHS 59' x 1760 ton
n Real-time Windows system for multi-tasking and file management
n Ram travel fully supported in low friction fiber slideways n Full electronic synchronization with proportional valve technology assuring maximum bend accuracy and reapeatability through constant monitoring and correction of beam parallelism by a CNC system +/- .0004 parallelism and repeatability n Stroke-depth measurement through high-precision linear scales which are bed referenced for the best bending repeatability
n Integrated diagnostic software
ACCESSORIES STANDARD: n Baykal Mechanical crowning n American/European-style top tool holders (American clamps on high tonnages) n Starter tool package consisting of gooseneck punch and multi-vee die block n Two-hand operation console with double foot-switch n Front-arms on linear guides n Electrically-interlocked side and rear guards n 39" Backgauge range OPTIONAL:
Standard controller Delem DA-66W
BACKGAUGE OPTIONS
Optional Cybelec ModEva 10 graphical 3D Windows based colour controller
n (A) Backgauge system with X-axis:
n Manual or power-driven (CNC) crowning tables
n Top tool manual quick-release clamps
• Travel on ballscrew spindles • DC-motor driven • Two mirometric stop-fingers with height and lateral adjustment • Range : 39.3" • Travel speed (max) : 780"/min • Positioning precision : ± .001"
n (B) Backgauge system with X-R axes:
Optional DA-69W graphical 3D Windows based colour controller
• Travel on ballscrew spindles • DC-motor driven • Two mirometric stop-fingers with lateral adjustment • Range X-axis : 39.3" R-axis : 6.3" • Travel speed X-axis : 826"/min (max) R-axis : 567"/min • Positioning X-axis : ± .001" precision R-axis : ± .002"
n Hydraulic tool clamping systems n Programmable sheet following arms n Special tooling for customer applications: • Special-profile top and bottom tools • Single-vee dies with table adapters n F ront light guards or front laser protection for enhanced safety
Sheet following arms
n (C) Additional backgauge axes for special applications:
Optional Cybelec ModEva 12 graphical 3D Windows based colour controller
• X1 - X2 • R1 - R2 • Z1 - Z2
OR
• X1 - X2 • X OR • R • R • Z1 - Z2 • Z1 - Z2
Details of these special backgauge systems are available on request
Front laser protection
Quick release clamps
Baykal CNC crowning
Manual crowning
TECHNICAL DATA
Throat Gap
49" 6'10" 8'6" 8'6" 10'2" 10'2" 10'2" 10'2" 10'2" 10'2" 12'1" 12'1" 12'1" 12'1" 12'1" 13'5" 13'5" 13'5" 13'5' 13"5" 20' 20' 20' 20' 20' 20' 20'
Table Width
307 5,500 307 11,880 307 13,640 307 15.620 307 17,380 307 18,480 307 21,340 307 22,000 283 24.200 236 33,000 307 24,200 307 23,540 283 24,640 260 29,700 236 37,400 283 26,400 260 27,500 236 30,800 212 40,700 165 57,200 236 44,000 236 55,000 165 66,000 165 74,800 165 85,800 165 105.600 165 121,000
Stroke
24 24 24 24 24 24 24 24 24 18 24 24 24 24 18 24 24 24 18 18 24 24 18 18 18 18 16
Daylight Opening
378 354 378 354 378 378 378 354 307 260 401 401 354 330 283 401 378 354 283 189 330 330 283 212 212 189 189
Machine Height
5 7 7 10 10 15 20 25 30 30 15 20 25 30 30 20 25 30 30 40 20 30 30 40 40 40 50
B
C
G
E1
E2
H
K
L
M
N
INCH
INCH
INCH
INCH
INCH
INCH
INCH
INCH
INCH
INCH
3'6" 5'3" 6'8" 8'4" 8'4" 8'4" 8'4" 8'4" 8'4" 8'4" 10'8" 10'8" 10'8" 10'8" 10'8" 11'7" 11'7" 11'7" 11'7" 11'7" 16'8" 16'8" 16'8" 16'8" 16'8" 16'8" 16'8"
58" 62" 62" 63" 63" 63" 63" 63" 63" 71" 64" 63" 63" 63" 72" 63" 63" 63" 72" 88" 77" 77" 81" 87" 88" 93" 94"
– – – – – – – – – – – – – – – – – – – – – – – – – 10" 15"
– – – – – – – – – – – – – – – – – – – – – – – – – 31" 45"
89" 100" 100" 103" 103" 114" 114" 114" 114" 124" 114" 114" 114" 114" 126" 114" 114" 114" 126" 137" 112" 118" 129" 128" 146" 138" 161"
17.9" 18.7" 18.7" 20.8" 20.8" 20.8" 20.8" 20.8" 20.8" 25.9" 20.8" 20.8" 20.8" 20.8" 25" 20.8" 20.8" 20.8" 25" 23.2" 20" 19.6" 22" 22.4" 20.8" 20.8" 21"
8.4" 8.2" 8.2" 10.2" 10.2" 10.2" 10.2" 10.2" 10.2" 12.5" 10.2" 10.2" 10.2" 10.2" 12.5" 10.2" 10.2" 10.2" 12.5" 12.5" 10.2" 10.2" 12.5" 12.5" 12.5" 13.3" 14.1"
31" 35" 35" 35" 35" 35" 35" 35" 35" 36" 34" 35" 35" 35" 38" 35" 35" 35" 38" 43" 39" 43" 44" 43" 43" 32" 43"
Pit Depth
3'6" 5'3" 6'8" 6'8" 8'4" 8'4" 8'4" 8'4" 8'4" 8'4" 10'8" 10'8" 10'8" 10'8" 10'8" 11'7" 11'7" 11'7" 11'7" 11'7" 16'8" 16'8" 16'8" 16'8" 16'8" 16'8" 16'8"
INCH
Bed Height
44 66 66 100 100 132 175 220 265 330 132 175 220 265 330 175 220 265 330 480 175 265 330 420 440 550 665
LBS
A
Side Frame Width
Motor Output HP
Inch/Min Inch/Min Working Return
Inside Frames
Working Length INCH
Inch/Min Approach
Bending Length
Capacity TON
TYPES
APHS 1250 x 40 APHS 2104 x 60 APHS 2604 x 60 APHS 2606 x 90 APHS 3104 x 90 APHS 3106 x 120 APHS 3108 x 160 APHS 3110 x 200 APHS 3112 x 240 APHS 3116 x 300 APHS 3705 x 120 APHS 3706 x 160 APHS 3708 x 200 APHS 3710 x 240 APHS 3712 x 300 APHS 4106 x 160 APHS 4107 x 200 APHS 4109 x 240 APHS 4112 x 300 APHS 4116 x 440 APHS 6104 x 160 APHS 6106 x 240 APHS 6108 x 300 APHS 6110 x 380 APHS 6112 x 440 APHS 6114 x 500 APHS 6116 x 600
Speeds
Approx. Weight
APHS cnc press brakes
2.3" 2.3” 2.3" 2.3" 2.3" 2.3" 2.3" 3.5" 3.5" 15" 2.3" 2.3" 3.5" 3.5" 11" 2.3" 3.5" 3.5” 11" 15" 3.5" 3.5" 8" 9.4" 11" 15" 15"
16" 16" 16" 16" 16” 16" 16” 16" 16" 19.6" 16" 16' 16" 16" 19.6" 16" 16" 16” 19.6" 19.6" 19.6" 19.6" 19.6" 19.6" 19.6" 19.6" 19.6"
Design and specifications are subject to change without notice.
FAB-LINE MACHINERY, LLC
P.O. Box 308, St. Charles, IL 60174 USA Tel 866-466-8298 Fax 630-587-5584 Email [email protected] Web www.fab-line.com
DEALER
