Cobra 29 LTD Classic Fuse Replacement

Cobra 29 LTD Classic Fuse Replacement

Cobra 29 LTD Classic Fuse Replacement This guide will show how to replace the fuse for the radio.

Written By: danperoni

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Cobra 29 LTD Classic Fuse Replacement

INTRODUCTION The fuse is part of the power cable. It burns out under high electrical current to prevent damage to the radio. The power cable should be disconnected from the power source before starting this guide.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Cobra 29 LTD Classic Fuse Replacement

Step 1 — Power Cable



Turn the power switch, the leftmost knob, counterclockwise to off.

Step 2



Turn the device around and firmly pull the power cable plug to remove it from the radio.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Cobra 29 LTD Classic Fuse Replacement

Step 3 — Fuse



Simultaneously push the fuse container together and rotate counterclockwise.

Step 4 

© iFixit — CC BY-NC-SA

www.iFixit.com

Pull the two halves apart.

Page 4 of 5

Cobra 29 LTD Classic Fuse Replacement

Step 5



Remove the fuse from the case.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-15 06:57:59 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5