Coil Coating
Product Datasheet BU Powder Coatings Kinze Blue Interpon 800 QJ011QF Product Description
Interpon 800 is a range of high durability TGIC powder coatings designed for exterior exposure. Tested against the most severe specification, Interpon 800 gives significantly improved gloss retention and resistance to color change. Interpon 800 powders are available in a wide color and gloss ranges.
Powder Properties
Gloss at 60° Specific gravity Coverage at 1.0 mils Storage Shelf life Cure schedule
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used. Substrate Pretreatment Film Thickness Cure Schedule
Mechanical, Chemical, and Durability Tests
Adhesion Hardness Impact Flexibility Salt Spray Humidity Exterior Durability
Safety Precautions
90+ 3 1.28 +/-0.05 g/cm 150 sq.ft/lb/mil 80°F 12 months, typical 20 minutes at 375°F
Cold Rolled Steel Iron Phosphate (B1000) or Zinc Phosphate (B952) 2.0-3.0 mils 15 minutes at 375°F Result 4-5B F-2H 40/10 min 1/4" or better
Interpon 800 is a range of high durability TGIC powder coatings designed for exterior exposure. Tested against the most severe specification, Interpon 800 gives significantly improved gloss retention and resistance to color change. Interpon 800 powders are available in a wide color and gloss ranges.
Powder Properties
Gloss at 60° Specific gravity Coverage at 1.0 mils Storage Shelf life Cure schedule
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used. Substrate Pretreatment Film Thickness Cure Schedule
Mechanical, Chemical, and Durability Tests
Adhesion Hardness Impact Flexibility Salt Spray Humidity Exterior Durability
Safety Precautions
90+ 3 1.28 +/-0.05 g/cm 150 sq.ft/lb/mil 80°F 12 months, typical 20 minutes at 375°F
Cold Rolled Steel Iron Phosphate (B1000) or Zinc Phosphate (B952) 2.0-3.0 mils 15 minutes at 375°F Result 4-5B F-2H 40/10 min 1/4" or better
