STEP 1 Start with a clean food bag. Flatten out the package and
measure the width. Measure and mark lines on both ends to make the length of the wrapper the same size as the width. Cut the wrapper on both ends where you’ve marked your lines. You will end up with a double-layered square of plastic with two open ends.
STEP 2 Take a long piece of tape and place it lengthwise across one of the open ends of the plastic square. Fold the tape over to the other side to seal it shut. Repeat for the other end.
STEP 3 Mark a border 1 ½” from the edge along each side of the square. Fold along this line. Unfold and flatten it.
PRO TIP:
Make sure all of your creases are super crisp, to ensure a well shaped bowl!
STEP 4 Fold up two sides at one corner of the square. Make a diagonal crease from the corner to the folded border creating an upright triangle. Repeat this of all corners, then unfold them.
STEP 5 Take the Velcro® tabs, unfasten them, and stick each one on either side of the corner of the square, one per triangle. Make sure that they’ll line up when folded and fastened.
STEP 6 Fold up the bowl at the corners and press the hook and loop fasteners together. You’re ready to dish up your favorite snack in your new bowl!