Commercial Series Energy Saver Oil-Powered Water Heater Oil-Powered Models Feature: ■ High Recovery Rates—The center flue model delivers recovery rates as high as 114 gallons per hour. The rear flue model satisfies an even heavier demand with recovery rates as high as 237 gallons per hour. ■ Factory Installed Hydrojet® Total Performance System—Cold water inlet sediment reduction device helps minimize sediment build up in tank. Increases the efficiency and delivery of hot water while minimizing temperature build up at top of tank (CF-70 model only). ■ Vitraglas® Lining—Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600°F (871°C). ■ Controls—Single immersion aquastat (supplied with water heater). ■ 1" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity (Center Flue model only). ■ Fiberglass Insulation—High density fiberglass insulation provides a thick blanket around tank and combustion chamber for more heat retention and maximum fuel efficiency (Rear Flue model only). ■ Water Connections—1" NPT factory installed dielectric waterway fittings extend water heater life and eases installation (RF-70 has 11⁄4" water connections). ■ Two Protective Magnesium Anode Rods—Provide added protection against corrosion for long trouble-free service (Rear Flue models have one Magnesium Anode Rod). ■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded. ■ Installation—Occupies relatively little floor space and does not require a separate fuel oil storage tank when used in oil-heated residence or commercial building. ■ Ceramic Fiber Combustion Chamber—Concentrates the flame for a smaller, hotter fire and faster transfer of maximum heat. ■ T&P Relief Valve—Installed. ■ Low Restriction Brass Drain Valve—Durable tamper proof design.
Photo is of CF-70-3
3-Year Limited Tank Warranties / 1-Year Limited Warranty on Parts. For more information on warranty, please visit www.bradfordwhite.com For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete copy of the warranty included with the heater. MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation.
610-B 0114
Commercial Oil-Powered Water Heater Energy Saver Models
Meet or exceed ASHRAE 90.1b (current standard). Recovery Efficiency ranging up to 78% Recovery at 100°F Rise*
Capacity Model Number U.S. Imp. MBTUH† Gal. Gal. Input CF-70-3 RF-70-3
70 70
58 58
U.S. GPH Firing Rate
U.S. GPH
119 0.85 114 95 210/245 1.50/1.75 203/237 170/198 Recovery at 56°C Rise*
Capacity Model Number
CF-70-3 RF-70-3
Imp. GPH
A Floor to Flue Conn.
B Jacket Dia.
C Flue Size
in.
in.
in.
67 63 11/16
24 28 1/4
6 8
A Floor to Flue Conn.
B Jacket Dia.
C Flue Size
Liters
kW Input
Liters/ Hour
mm.
mm.
mm.
265 265
34.8 61.5/71.8
431 768/897
1702 1618
610 718
152 203
D E F Floor to Floor to Floor to T&P C/L Burner Cold Conn. Opening Water Conn. in. in. in.
G Floor to Hot Water Conn. in.
H Floor to Heater Top in.
in.
lbs.
65 7/8 64
65 15/16 72 1/16
32 15/32 38 9/16
290 410
D E F Floor to Floor to Floor to T&P C/L Burner Cold Conn. Opening Water Conn. mm. mm. mm.
G Floor to Hot Water Conn. mm.
H Floor to Heater Top
J Floor to Aquastat
mm.
mm.
kg.
208 259
1673 1626
1675 1830
825 979
132 186
58 64
8 3/16 10 3/16
1473 1626
65 7/8 20 7/8
1673 530
J Floor to Aquastat
Approx. Shipping Weight
Approx. Shipping Weight
*Based on manufacturers rated recovery efficiency. CF = Center Flue. RF = Rear Flue. †MBTUH = Thousand BTU/Hr.
B C
B C
H
A F&G D
H
G D
A J
J
F E
E Center Flue
Rear Flue
General All Oil-Powered water heaters are certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). The water connections for the CF-70 are 1" NPT (25 mm) on 11" (279 mm) centers and 11⁄4" (32mm) NPT front connections for the RF-70. Approved for use with No. 2 fuel oil. All center flue water heaters meet or exceed DOE and CSA B211 energy requirements as certified by ETL. All water heaters must be installed with a temperature and pressure relief valve and on a non-combustible floor. All water heaters are approved for use with “L” vent. Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement. Suitable for Water (Potable) Heating and Space Heating. Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
Ambler, PA For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.
Sales 800-523-2931 ● Fax 215-641-1670 / Technical Support 800-334-3393 ● Fax 269-795-1089 ● Warranty 800-531-2111 ● Fax 269-795-1089 International: Telephone 215-641-9400 ● Telefax 215-641-9750 / www.bradfordwhite.com Sales / Technical Support 866-690-0961 / 905-238-0100 ● Fax 905-238-0105 / www.bradfordwhite.com
©2014, Bradford White Corporation. All rights reserved.
610-B 0114
Printed in U.S.A.