Commercial Storage Tanks
®
Commercial Storage Tanks
FACTORY JACKETED AND INSULATED STORAGE TANKS These A. O. Smith storage tanks are designed for storing potable water. Fitting locations are designed to meet the needs of normal installations plus those for the A. O. Smith Cer-Temp 80 ® and Shure -Temp™ piping methods.
FEATURES A. O. Smith storage tanks are ideal for use with gas-fired copper heat exchanger equipment for storage of any potable water at temperatures up to 180°F. GLASSLINED TANK - Alkaline borosilicate composition permanently fused to steel by firing at a temperature of 1600°F, providing years of corrosion protection and dependable use. HEAVY GAUGE STEEL JACKET - With baked enamel finish. THREADED OPENINGS - All tanks furnished with threaded openings for thermometer, relief valve, 2” recirculation lines, tankstat, and drain valve. INSULATION - Storage Tanks meet or exceed R12.5 minimum thermal insulation requirements of the U. S. Department of Energy and current edition of ASHRAE/IESNA 90.1 TJ-80S, TJ-80A, TJV-120M and TJV-120A • Fits through 30” door • Magnesium anode for anti-corrosion protection TJ-80A • 80 gallons • High density foam insulation saves energy, helps reduce standby heat loss • 160 psi ASME standard working pressure TJV-120A • 119 gallons • High density foam insulation saves energy, helps reduce standby heat loss • 160 psi ASME standard working pressure
MODELS TJ-80S, TJ-80A TJV-120A, TJV-120M & TJV-200M
TJ-80S • 80 gallons • High density foam insulation saves energy, helps reduce standby heat loss • 160 psi working pressure TJV-120M • 119 gallons • High density foam insulation saves energy, helps reduce standby heat loss • 160 psi working pressure
OPTIONS Perfectly balanced manifold kits (120 gallon models) allow installation where 240 to 480 gallons of stored water is required. TJV-200-M - 175 GALLONS • 160 psi ASME standard working pressure • 2” foam insulation • Handhole cleanout (Standard) • Fits through 33” door • Storage is downsized to 175 gallons for a 32” x 77” envelope for space restrictive installations. Model TJV-200 is available with 200 gallons of storage. • Magnesium anodes for extra corrosion protection
120 Gallon Model
5 YEAR WARRANTY If the tank should leak any time during the first 5 years, under the terms of the warranty, A. O. Smith will repair or replace the tank. Installation, labor, handling and local delivery are extra. For complete information, consult the written warranty.
Page 1 of 4
RevisedSeptember November 2012 Revised 2010
239943_AOSTT35100.indd 1 252260_AOSTT35100.indd
AOSTT35100
11/29/12 9/12/11 11:13 10:14 AM
Commercial Storage Tanks
®
TJV-120A
TJV-120M 2" NPT
2" NPT
3/4" NPT (ANODE)
1-1/4" NPT (ANODE)
1" NPT
29 3/8"
28"
1" NPT FRONT
1" NPT
2" NPT FRONT
ASME PLATE LOCATED UNDER COVER
62" 54 1/4"
15"
2" NPT FRONT
61 3/4"
2" NPT FRONT
42 1/4"
3/4" NPT 50 1/2" 44 1/2"
2" NPT FRONT & REAR
CLEANOUT 11"
21 1/4"
4 1/8"
3 1/2"
9 3/4"
2" NPT FRONT & REAR
17 3/4" 10 3/4"
3/4" NPT FRONT
TJV-200M 3/4" NPT (ANODES)
2" NPT 32 "
1" NPT
3/4" NPT
2" NPT
77 " 64"
ASME PLATE LOCATED UNDER COVER
17 1/4" 12 1/4"
17 1/4" 12 1/4"
For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
Revised November 2012 Revised September 2010
www.hotwater.com 239943_AOSTT35100.indd 2 252260_AOSTT35100.indd
Page 2 of 4
AOSTT35100
11/29/12 9/12/11 11:13 10:14 AM
®
Commercial Storage Tanks TJ-80S
TJ-80A
2" NPT 3/4" NPT (ANODE)
1" NPT
2" NPT
3/4" NPT (ANODE) 25 1/4"
26 1/2"
2" NPT FRONT & REAR
2" NPT FRONT & REAR
ASME PLATE UNDER COVER
3/4" NPT REAR 54 7/8"
3/4" NPT REAR
42 3/4"
63" 51 7/8"
32 1/4"
3/4" NPT FRONT
19 1/2" 11" 9 3/4"
2" NPT FRONT & REAR
3/4" NPT FRONT
47"
2" NPT FRONT & REAR
16" 7"
3/4" NPT REAR
3 3/4"
3/4" NPT REAR
FLOOR SPACE REQUIREMENTS
For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
RevisedSeptember November 2012 Revised 2010
www.hotwater.com 239943_AOSTT35100.indd 3 252260_AOSTT35100.indd
Page 3 of 4
AOSTT35100
11/29/12 9/12/11 11:14 10:14 AM
Commercial Storage Tanks
Storage tank shall be A.O. SMITH glasslined storage tank. Tank shall be ________ “ x ________ “ and have a nominal capacity of _________ gallons. Tank(s) shall have threaded openings as shown on drawings. Interior of tank(s) shall be glasslined with an alkaline borosilicate composition which has been fused to the steel by firing at a temperature of 16000F. Glass coating shall be continuous over the entire inner surface of the tank. Outer jacket shall have a baked enamel finish. Meets minimum thermal insulation requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1. Cathodic protection shall be provided. Tank shall have a working pressure of _________ psi. Tank shall have a five year limited warranty as outlined in the written warranty.
For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
RevisedSeptember November 2012 Revised 2010
www.hotwater.com 239943_AOSTT35100.indd 4 252260_AOSTT35100.indd
Page 4 of 4
AOSTT35100
11/29/12 9/12/11 11:14 10:14 AM
Commercial Storage Tanks
FACTORY JACKETED AND INSULATED STORAGE TANKS These A. O. Smith storage tanks are designed for storing potable water. Fitting locations are designed to meet the needs of normal installations plus those for the A. O. Smith Cer-Temp 80 ® and Shure -Temp™ piping methods.
FEATURES A. O. Smith storage tanks are ideal for use with gas-fired copper heat exchanger equipment for storage of any potable water at temperatures up to 180°F. GLASSLINED TANK - Alkaline borosilicate composition permanently fused to steel by firing at a temperature of 1600°F, providing years of corrosion protection and dependable use. HEAVY GAUGE STEEL JACKET - With baked enamel finish. THREADED OPENINGS - All tanks furnished with threaded openings for thermometer, relief valve, 2” recirculation lines, tankstat, and drain valve. INSULATION - Storage Tanks meet or exceed R12.5 minimum thermal insulation requirements of the U. S. Department of Energy and current edition of ASHRAE/IESNA 90.1 TJ-80S, TJ-80A, TJV-120M and TJV-120A • Fits through 30” door • Magnesium anode for anti-corrosion protection TJ-80A • 80 gallons • High density foam insulation saves energy, helps reduce standby heat loss • 160 psi ASME standard working pressure TJV-120A • 119 gallons • High density foam insulation saves energy, helps reduce standby heat loss • 160 psi ASME standard working pressure
MODELS TJ-80S, TJ-80A TJV-120A, TJV-120M & TJV-200M
TJ-80S • 80 gallons • High density foam insulation saves energy, helps reduce standby heat loss • 160 psi working pressure TJV-120M • 119 gallons • High density foam insulation saves energy, helps reduce standby heat loss • 160 psi working pressure
OPTIONS Perfectly balanced manifold kits (120 gallon models) allow installation where 240 to 480 gallons of stored water is required. TJV-200-M - 175 GALLONS • 160 psi ASME standard working pressure • 2” foam insulation • Handhole cleanout (Standard) • Fits through 33” door • Storage is downsized to 175 gallons for a 32” x 77” envelope for space restrictive installations. Model TJV-200 is available with 200 gallons of storage. • Magnesium anodes for extra corrosion protection
120 Gallon Model
5 YEAR WARRANTY If the tank should leak any time during the first 5 years, under the terms of the warranty, A. O. Smith will repair or replace the tank. Installation, labor, handling and local delivery are extra. For complete information, consult the written warranty.
Page 1 of 4
RevisedSeptember November 2012 Revised 2010
239943_AOSTT35100.indd 1 252260_AOSTT35100.indd
AOSTT35100
11/29/12 9/12/11 11:13 10:14 AM
Commercial Storage Tanks
®
TJV-120A
TJV-120M 2" NPT
2" NPT
3/4" NPT (ANODE)
1-1/4" NPT (ANODE)
1" NPT
29 3/8"
28"
1" NPT FRONT
1" NPT
2" NPT FRONT
ASME PLATE LOCATED UNDER COVER
62" 54 1/4"
15"
2" NPT FRONT
61 3/4"
2" NPT FRONT
42 1/4"
3/4" NPT 50 1/2" 44 1/2"
2" NPT FRONT & REAR
CLEANOUT 11"
21 1/4"
4 1/8"
3 1/2"
9 3/4"
2" NPT FRONT & REAR
17 3/4" 10 3/4"
3/4" NPT FRONT
TJV-200M 3/4" NPT (ANODES)
2" NPT 32 "
1" NPT
3/4" NPT
2" NPT
77 " 64"
ASME PLATE LOCATED UNDER COVER
17 1/4" 12 1/4"
17 1/4" 12 1/4"
For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
Revised November 2012 Revised September 2010
www.hotwater.com 239943_AOSTT35100.indd 2 252260_AOSTT35100.indd
Page 2 of 4
AOSTT35100
11/29/12 9/12/11 11:13 10:14 AM
®
Commercial Storage Tanks TJ-80S
TJ-80A
2" NPT 3/4" NPT (ANODE)
1" NPT
2" NPT
3/4" NPT (ANODE) 25 1/4"
26 1/2"
2" NPT FRONT & REAR
2" NPT FRONT & REAR
ASME PLATE UNDER COVER
3/4" NPT REAR 54 7/8"
3/4" NPT REAR
42 3/4"
63" 51 7/8"
32 1/4"
3/4" NPT FRONT
19 1/2" 11" 9 3/4"
2" NPT FRONT & REAR
3/4" NPT FRONT
47"
2" NPT FRONT & REAR
16" 7"
3/4" NPT REAR
3 3/4"
3/4" NPT REAR
FLOOR SPACE REQUIREMENTS
For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
RevisedSeptember November 2012 Revised 2010
www.hotwater.com 239943_AOSTT35100.indd 3 252260_AOSTT35100.indd
Page 3 of 4
AOSTT35100
11/29/12 9/12/11 11:14 10:14 AM
Commercial Storage Tanks
Storage tank shall be A.O. SMITH glasslined storage tank. Tank shall be ________ “ x ________ “ and have a nominal capacity of _________ gallons. Tank(s) shall have threaded openings as shown on drawings. Interior of tank(s) shall be glasslined with an alkaline borosilicate composition which has been fused to the steel by firing at a temperature of 16000F. Glass coating shall be continuous over the entire inner surface of the tank. Outer jacket shall have a baked enamel finish. Meets minimum thermal insulation requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1. Cathodic protection shall be provided. Tank shall have a working pressure of _________ psi. Tank shall have a five year limited warranty as outlined in the written warranty.
For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
RevisedSeptember November 2012 Revised 2010
www.hotwater.com 239943_AOSTT35100.indd 4 252260_AOSTT35100.indd
Page 4 of 4
AOSTT35100
11/29/12 9/12/11 11:14 10:14 AM
