Compact system enclosures Rittal CM
Compact system enclosures Rittal CM Width: 600 – 800, height: 800 – 1200 F
H
G
B
B
Compact system enclosures Rittal CM
1.2 T
Material: Sheet steel Enclosure: 1.5 mm Door: 2.0 mm Mounting plate: 3.0 mm
Protection category: IP 55 to EN 60 529/09.2000, complies with NEMA 12 provided suitable gland plates are selected.
Surface finish: Enclosure and door: Dipcoat-primed, powder-coated in textured RAL 7035 on the outside Mounting plate: Zinc-plated
Supply includes: Enclosure with one door, r/h door hinge, may be swapped to opposite side, mounting plate, base open for individual cable entry.
Width (B) mm
Packs of
Approvals, see page 29.
Also required:
Detailed drawing/nominal dimensions, see page 1181.
Gland plates, see page 911 – 912, or end plate, see page 913. Rittal service: Other sizes, cut-outs and holes available on request.
600
600
600
600
800
800
800
800
Height (H) mm
800
1000
1200
1200
1000
1000
1200
1200
Depth (T) mm
400
400
300
400
300
400
300
400
Mounting plate width (F) mm
540
540
540
540
740
740
740
740
Mounting plate height (G) mm
755
955
1155
1155
955
955
1155
1155
5110.500
5111.500
5112.500
5113.500
5114.500
5115.500
5116.500
5117.500
1
1
1
1
1
1
1
1
Model No. CM
1
Door
Page
Base/plinth Components front and rear Trim panels (sides)
Height 100 mm
1 set
8601.600
8601.600
8601.600
8601.600
8601.800
8601.800
8601.800
8601.800
Height 200 mm
1 set
8602.600
8602.600
8602.600
8602.600
8602.800
8602.800
8602.800
8602.800
893 893
Height 100 mm
1 set
8601.040
8601.040
8601.030
8601.040
8601.030
8601.040
8601.030
8601.040
893
Height 200 mm
1 set
8602.040
8602.040
8602.030
8602.040
8602.030
8602.040
8602.030
8602.040
893
Accessories for height
4
5001.051
5001.052
5001.053
5001.053
5001.052
5001.052
5001.053
5001.053
992
for width
4
5001.050
5001.050
5001.050
5001.050
5001.051
5001.051
5001.051
5001.051
992
in depth
4
8612.140
8612.140
8612.130
8612.140
8612.130
8612.140
8612.130
8612.140
993
in width
4
8612.060
8612.060
8612.060
8612.060
8612.080
8612.080
8612.080
8612.080
993
Support strips for door
20
4596.000
4596.000
4596.000
4596.000
4598.000
4598.000
4598.000
4598.000
997
Punched sections with mounting flanges for door
4
8612.050
8612.050
8612.050
8612.050
–
–
–
–
993
Rail for interior installation Matching punched sections with mounting flanges
Cable clamp rail
1
5001.080
5001.080
5001.080
5001.080
5001.081
5001.081
5001.081
5001.081
1062
Wiring plan pocket Sheet steel, depth 35 mm
1
4116.500
4116.500
4116.500
4116.500
4118.500
4118.500
4118.500
4118.500
967
Rain canopy/vented roof
1
5001.310
5001.310
5001.300
5001.310
5001.320
5001.330
5001.320
5001.330
969
Lock systems Standard double-bit lock insert may be exchanged for lock inserts, type F, see page 956, and folding lever handle, see page 949 – 950. To order primed enclosures, please add extension .800 to the Model No. Delivery times available on request.
Mounting plate slide block Allows the populated mounting plate to slide in easily, Model No. see page 982.
Base/plinth, see page 892.
One Model No. for the base/plinth components front and rear.
One Model No. for the base/plinth trim, side.
One complete base/plinth.
Accessories Page 890 System lights Page 1027 Cable gland Page 1054 Signal pillars Page 1125 132
Rittal Catalogue 32/Industrial Enclosures
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Compact system enclosures Rittal CM Width: 1000 – 1200, height: 1000 – 1400 F T
G
B
H
B
Material: Sheet steel Enclosure: 1.5 mm Door: 2.0 mm Mounting plate: 3.0 mm
Protection category: IP 55 to EN 60 529/09.2000, complies with NEMA 12 provided suitable gland plates are selected.
Surface finish: Enclosure and door: Dipcoat-primed, Powder-coated in textured RAL 7035 on the outside Mounting plate: Zinc-plated
Supply includes: Enclosure with two doors, lockable door, may be swapped to opposite side, mounting plate, base open for individual cable entry.
Width (B) mm
Packs of
Approvals, see page 29.
Also required:
Detailed drawing/nominal dimensions, see page 1181.
Gland plates, see page 911 – 912, or end plate, see page 913. Rittal service: Other sizes, cut-outs and holes available on request.
1000
1000
1000
1000
1000
1200
Height (H) mm
1000
1200
1200
1400
1400
1200
Depth (T) mm
300
300
400
300
400
400
Mounting plate width (F) mm
940
940
940
940
940
1140
Mounting plate height (G) mm Model No. CM
1
Doors
Compact system enclosures Rittal CM
1.2
955
1155
1155
1355
1355
1155
5118.500
5119.500
5120.500
5121.500
5122.500
5123.500
2
2
2
2
2
2
Page
Base/plinth Components front and rear Trim panels (sides)
Height 100 mm
1 set
8601.000
8601.000
8601.000
8601.000
8601.000
8601.200
Height 200 mm
1 set
8602.000
8602.000
8602.000
8602.000
8602.000
8602.200
893 893
Height 100 mm
1 set
8601.030
8601.030
8601.040
8601.030
8601.040
8601.040
893
Height 200 mm
1 set
8602.030
8602.030
8602.040
8602.030
8602.040
8602.040
893
for height
4
5001.052
5001.053
5001.053
5001.054
5001.054
5001.053
992
for width
4
5001.052
5001.052
5001.052
5001.052
5001.052
5001.053
992
in depth
4
8612.130
8612.130
8612.140
8612.130
8612.140
8612.140
993
Accessories Rail for interior installation Matching punched sections with mounting flanges
4
8612.000
8612.000
8612.000
8612.000
8612.000
8612.020
993
Support strips for door
in width
20
4309.000
4309.000
4309.000
4309.000
4309.000
4596.000
997
Punched sections with mounting flanges for door
4
8612.040
8612.040
8612.040
8612.040
8612.040
8612.050
993
Cable clamp rail
1
5001.082
5001.082
5001.082
5001.082
5001.082
5001.083
1062
Wiring plan pocket Sheet steel, depth 35 mm
1
4115.500
4115.500
4115.500
4115.500
4115.500
4116.500
967
Rain canopy/vented roof
1
5001.340
5001.340
5001.350
5001.340
5001.350
5001.360
969
Lock systems Standard double-bit lock insert may be exchanged for lock inserts, type F, see page 956, and folding lever handle, see page 949 – 950. To order primed enclosures, please add extension .800 to the Model No. Delivery times available on request.
Section for cable entry, rear, may be integrated into the modular base plate concept, see page 1047.
Mounting plate attachment for high dynamic loads, Model No. see page 983.
Accessories Page 890 System lights Page 1027 Cable gland Page 1054 Signal pillars Page 1125 Rittal Catalogue 32/Industrial Enclosures
133
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial Enclosures Compact enclosures 1.2 Compact system enclosures Rittal CM Page 132 – 133 CM 5110.500 – 5117.500
CM 5118.500 – 5123.500 B1 T1
98 X
H4
H5 T5
50
30
2
13
19
67.5
20
25
24.5
34
25
N1 x 25 = H6
4.
2
12.5
25
Ø
34
X
1
Industrial Enclosures
H4 B5
12.5
2
12.5
B4
B5
17.5
G1
H1 4.
12.5
B4
N1 x 25 = H6
Ø
46
510
50
B5
1.
T4
G2
8. Ø
20
H2
7
7 8. Ø
50
H1
T3
H3
20
49.75
5
20
B4
C
T2
Y
Y
25
3.5 B2
20
B3
B3 B2
25
67.5
25
3.5
20
B2
25
3.5
3.5
241
B1
F2
100
F1 B6
B6
18
121.5
B8 44.5
20
20
80
B8 25
43.5
B7 40
16
5
20
B8
B7 80
Ø
5
20.25
80 B7
T6
80
20
6
T6
3
50
6
Ø1
Ø1 20.25
Y
32.5
32.5
45
45
X Door interior view Y Hole for eyebolts 1 Does not apply to H = 800 2 Only for enclosure width from 1000 mm
Enclosure width mm
Model No. CM
B7
B8
H1
H3
H4
H5
H6
N1
T1
465
800 793 750
665
276 725
29
400 374.5 275 373 224.5 334 540 425 755 717
5111.500
600 593 550 475 463 535 440
465 1000 993 950 432.5 376 925
37
400 374.5 275 373 224.5 334 540 425 955 917
5112.500
600 593 550 475 463 535 440
465 1200 1193 1150 532.5 476 1125 45
300 274.5 175 273 124.5 234 540 425 1155 1117
600 593 550 475 463 535 440
465 1200 1193 1150 532.5 476 1125 45
400 374.5 275 373 224.5 334 540 425 1155 1117
800 793 750 675 663 735 640
665 1000 993 950 432.5 376 925
37
300 274.5 175 273 124.5 234 740 625 955 917
800 793 750 675 663 735 640
665 1000 993 950 432.5 376 925
37
400 374.5 275 373 224.5 334 740 625 955 917
800 793 750 675 663 735 640
665 1200 1193 1150 532.5 476 1125 45
300 274.5 175 273 124.5 234 740 625 1155 1117
5117.500
800 793 750 675 663 735 640
665 1200 1193 1150 532.5 476 1125 45
400 374.5 275 373 224.5 334 740 625 1155 1117
5118.500
1000 494 950 375 363 935 400 432.5 1000 993 950 432.5 376 925
5114.500 5115.500
5119.500 5120.500 5121.500 5122.500 5123.500
double-door
5116.500
B3
B4
B5
B6
H2
T2
T3
T4
T5
Width mm Height mm
600 593 550 475 463 535 440
5113.500
B2
Mounting plate
Enclosure depth mm
5110.500 single-door
B1
Enclosure height mm
T6
F1
F2
G1
G2
37
300 274.5 175 273 124.5 234 940 825 955 917
1000 494 950 375 363 935 400 432.5 1200 1193 1150 532.5 476 1125 45
300 274.5 175 273 124.5 234 940 825 1155 1117
1000 494 950 375 363 935 400 432.5 1200 1193 1150 532.5 476 1125 45
400 374.5 275 373 224.5 334 940 825 1155 1117
1000 494 950 375 363 935 400 432.5 1400 1393 1350 632.5 576 1325 53
300 274.5 175 273 124.5 234 940 825 1355 1317
1000 494 950 375 363 935 400 432.5 1400 1393 1350 632.5 576 1325 53
400 374.5 275 373 224.5 334 940 825 1355 1317
1200 594 1150 475 463 1135 500 532.5 1200 1193 1150 532.5 476 1125 45
400 374.5 275 373 224.5 334 1140 1025 1155 1117
Rittal Catalogue 32/Industrial Enclosures
1181
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
H
G
B
B
Compact system enclosures Rittal CM
1.2 T
Material: Sheet steel Enclosure: 1.5 mm Door: 2.0 mm Mounting plate: 3.0 mm
Protection category: IP 55 to EN 60 529/09.2000, complies with NEMA 12 provided suitable gland plates are selected.
Surface finish: Enclosure and door: Dipcoat-primed, powder-coated in textured RAL 7035 on the outside Mounting plate: Zinc-plated
Supply includes: Enclosure with one door, r/h door hinge, may be swapped to opposite side, mounting plate, base open for individual cable entry.
Width (B) mm
Packs of
Approvals, see page 29.
Also required:
Detailed drawing/nominal dimensions, see page 1181.
Gland plates, see page 911 – 912, or end plate, see page 913. Rittal service: Other sizes, cut-outs and holes available on request.
600
600
600
600
800
800
800
800
Height (H) mm
800
1000
1200
1200
1000
1000
1200
1200
Depth (T) mm
400
400
300
400
300
400
300
400
Mounting plate width (F) mm
540
540
540
540
740
740
740
740
Mounting plate height (G) mm
755
955
1155
1155
955
955
1155
1155
5110.500
5111.500
5112.500
5113.500
5114.500
5115.500
5116.500
5117.500
1
1
1
1
1
1
1
1
Model No. CM
1
Door
Page
Base/plinth Components front and rear Trim panels (sides)
Height 100 mm
1 set
8601.600
8601.600
8601.600
8601.600
8601.800
8601.800
8601.800
8601.800
Height 200 mm
1 set
8602.600
8602.600
8602.600
8602.600
8602.800
8602.800
8602.800
8602.800
893 893
Height 100 mm
1 set
8601.040
8601.040
8601.030
8601.040
8601.030
8601.040
8601.030
8601.040
893
Height 200 mm
1 set
8602.040
8602.040
8602.030
8602.040
8602.030
8602.040
8602.030
8602.040
893
Accessories for height
4
5001.051
5001.052
5001.053
5001.053
5001.052
5001.052
5001.053
5001.053
992
for width
4
5001.050
5001.050
5001.050
5001.050
5001.051
5001.051
5001.051
5001.051
992
in depth
4
8612.140
8612.140
8612.130
8612.140
8612.130
8612.140
8612.130
8612.140
993
in width
4
8612.060
8612.060
8612.060
8612.060
8612.080
8612.080
8612.080
8612.080
993
Support strips for door
20
4596.000
4596.000
4596.000
4596.000
4598.000
4598.000
4598.000
4598.000
997
Punched sections with mounting flanges for door
4
8612.050
8612.050
8612.050
8612.050
–
–
–
–
993
Rail for interior installation Matching punched sections with mounting flanges
Cable clamp rail
1
5001.080
5001.080
5001.080
5001.080
5001.081
5001.081
5001.081
5001.081
1062
Wiring plan pocket Sheet steel, depth 35 mm
1
4116.500
4116.500
4116.500
4116.500
4118.500
4118.500
4118.500
4118.500
967
Rain canopy/vented roof
1
5001.310
5001.310
5001.300
5001.310
5001.320
5001.330
5001.320
5001.330
969
Lock systems Standard double-bit lock insert may be exchanged for lock inserts, type F, see page 956, and folding lever handle, see page 949 – 950. To order primed enclosures, please add extension .800 to the Model No. Delivery times available on request.
Mounting plate slide block Allows the populated mounting plate to slide in easily, Model No. see page 982.
Base/plinth, see page 892.
One Model No. for the base/plinth components front and rear.
One Model No. for the base/plinth trim, side.
One complete base/plinth.
Accessories Page 890 System lights Page 1027 Cable gland Page 1054 Signal pillars Page 1125 132
Rittal Catalogue 32/Industrial Enclosures
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Compact system enclosures Rittal CM Width: 1000 – 1200, height: 1000 – 1400 F T
G
B
H
B
Material: Sheet steel Enclosure: 1.5 mm Door: 2.0 mm Mounting plate: 3.0 mm
Protection category: IP 55 to EN 60 529/09.2000, complies with NEMA 12 provided suitable gland plates are selected.
Surface finish: Enclosure and door: Dipcoat-primed, Powder-coated in textured RAL 7035 on the outside Mounting plate: Zinc-plated
Supply includes: Enclosure with two doors, lockable door, may be swapped to opposite side, mounting plate, base open for individual cable entry.
Width (B) mm
Packs of
Approvals, see page 29.
Also required:
Detailed drawing/nominal dimensions, see page 1181.
Gland plates, see page 911 – 912, or end plate, see page 913. Rittal service: Other sizes, cut-outs and holes available on request.
1000
1000
1000
1000
1000
1200
Height (H) mm
1000
1200
1200
1400
1400
1200
Depth (T) mm
300
300
400
300
400
400
Mounting plate width (F) mm
940
940
940
940
940
1140
Mounting plate height (G) mm Model No. CM
1
Doors
Compact system enclosures Rittal CM
1.2
955
1155
1155
1355
1355
1155
5118.500
5119.500
5120.500
5121.500
5122.500
5123.500
2
2
2
2
2
2
Page
Base/plinth Components front and rear Trim panels (sides)
Height 100 mm
1 set
8601.000
8601.000
8601.000
8601.000
8601.000
8601.200
Height 200 mm
1 set
8602.000
8602.000
8602.000
8602.000
8602.000
8602.200
893 893
Height 100 mm
1 set
8601.030
8601.030
8601.040
8601.030
8601.040
8601.040
893
Height 200 mm
1 set
8602.030
8602.030
8602.040
8602.030
8602.040
8602.040
893
for height
4
5001.052
5001.053
5001.053
5001.054
5001.054
5001.053
992
for width
4
5001.052
5001.052
5001.052
5001.052
5001.052
5001.053
992
in depth
4
8612.130
8612.130
8612.140
8612.130
8612.140
8612.140
993
Accessories Rail for interior installation Matching punched sections with mounting flanges
4
8612.000
8612.000
8612.000
8612.000
8612.000
8612.020
993
Support strips for door
in width
20
4309.000
4309.000
4309.000
4309.000
4309.000
4596.000
997
Punched sections with mounting flanges for door
4
8612.040
8612.040
8612.040
8612.040
8612.040
8612.050
993
Cable clamp rail
1
5001.082
5001.082
5001.082
5001.082
5001.082
5001.083
1062
Wiring plan pocket Sheet steel, depth 35 mm
1
4115.500
4115.500
4115.500
4115.500
4115.500
4116.500
967
Rain canopy/vented roof
1
5001.340
5001.340
5001.350
5001.340
5001.350
5001.360
969
Lock systems Standard double-bit lock insert may be exchanged for lock inserts, type F, see page 956, and folding lever handle, see page 949 – 950. To order primed enclosures, please add extension .800 to the Model No. Delivery times available on request.
Section for cable entry, rear, may be integrated into the modular base plate concept, see page 1047.
Mounting plate attachment for high dynamic loads, Model No. see page 983.
Accessories Page 890 System lights Page 1027 Cable gland Page 1054 Signal pillars Page 1125 Rittal Catalogue 32/Industrial Enclosures
133
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial Enclosures Compact enclosures 1.2 Compact system enclosures Rittal CM Page 132 – 133 CM 5110.500 – 5117.500
CM 5118.500 – 5123.500 B1 T1
98 X
H4
H5 T5
50
30
2
13
19
67.5
20
25
24.5
34
25
N1 x 25 = H6
4.
2
12.5
25
Ø
34
X
1
Industrial Enclosures
H4 B5
12.5
2
12.5
B4
B5
17.5
G1
H1 4.
12.5
B4
N1 x 25 = H6
Ø
46
510
50
B5
1.
T4
G2
8. Ø
20
H2
7
7 8. Ø
50
H1
T3
H3
20
49.75
5
20
B4
C
T2
Y
Y
25
3.5 B2
20
B3
B3 B2
25
67.5
25
3.5
20
B2
25
3.5
3.5
241
B1
F2
100
F1 B6
B6
18
121.5
B8 44.5
20
20
80
B8 25
43.5
B7 40
16
5
20
B8
B7 80
Ø
5
20.25
80 B7
T6
80
20
6
T6
3
50
6
Ø1
Ø1 20.25
Y
32.5
32.5
45
45
X Door interior view Y Hole for eyebolts 1 Does not apply to H = 800 2 Only for enclosure width from 1000 mm
Enclosure width mm
Model No. CM
B7
B8
H1
H3
H4
H5
H6
N1
T1
465
800 793 750
665
276 725
29
400 374.5 275 373 224.5 334 540 425 755 717
5111.500
600 593 550 475 463 535 440
465 1000 993 950 432.5 376 925
37
400 374.5 275 373 224.5 334 540 425 955 917
5112.500
600 593 550 475 463 535 440
465 1200 1193 1150 532.5 476 1125 45
300 274.5 175 273 124.5 234 540 425 1155 1117
600 593 550 475 463 535 440
465 1200 1193 1150 532.5 476 1125 45
400 374.5 275 373 224.5 334 540 425 1155 1117
800 793 750 675 663 735 640
665 1000 993 950 432.5 376 925
37
300 274.5 175 273 124.5 234 740 625 955 917
800 793 750 675 663 735 640
665 1000 993 950 432.5 376 925
37
400 374.5 275 373 224.5 334 740 625 955 917
800 793 750 675 663 735 640
665 1200 1193 1150 532.5 476 1125 45
300 274.5 175 273 124.5 234 740 625 1155 1117
5117.500
800 793 750 675 663 735 640
665 1200 1193 1150 532.5 476 1125 45
400 374.5 275 373 224.5 334 740 625 1155 1117
5118.500
1000 494 950 375 363 935 400 432.5 1000 993 950 432.5 376 925
5114.500 5115.500
5119.500 5120.500 5121.500 5122.500 5123.500
double-door
5116.500
B3
B4
B5
B6
H2
T2
T3
T4
T5
Width mm Height mm
600 593 550 475 463 535 440
5113.500
B2
Mounting plate
Enclosure depth mm
5110.500 single-door
B1
Enclosure height mm
T6
F1
F2
G1
G2
37
300 274.5 175 273 124.5 234 940 825 955 917
1000 494 950 375 363 935 400 432.5 1200 1193 1150 532.5 476 1125 45
300 274.5 175 273 124.5 234 940 825 1155 1117
1000 494 950 375 363 935 400 432.5 1200 1193 1150 532.5 476 1125 45
400 374.5 275 373 224.5 334 940 825 1155 1117
1000 494 950 375 363 935 400 432.5 1400 1393 1350 632.5 576 1325 53
300 274.5 175 273 124.5 234 940 825 1355 1317
1000 494 950 375 363 935 400 432.5 1400 1393 1350 632.5 576 1325 53
400 374.5 275 373 224.5 334 940 825 1355 1317
1200 594 1150 475 463 1135 500 532.5 1200 1193 1150 532.5 476 1125 45
400 374.5 275 373 224.5 334 1140 1025 1155 1117
Rittal Catalogue 32/Industrial Enclosures
1181
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
