Conair Infiniti Pro Model 259NP Back Panel Replacement
Conair Infiniti Pro Model 259NP Back Panel Replacement
Conair Infiniti Pro Model 259NP Back Panel Replacement This guide will cover the removal of the back panel of the hair dryer. This exposes the interior of the hair dryer for further replacements.
Written By: Timothy Lo
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Conair Infiniti Pro Model 259NP Back Panel Replacement
INTRODUCTION In order to replace any internal parts, you first need to take off the back panel of the hair dryer. This guide will show you how to do that.
TOOLS: Phillips #2 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Conair Infiniti Pro Model 259NP Back Panel Replacement
Step 1 — Back Panel
Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.
Hold the hair dryer by the handle so that the back panel faces up.
Step 2
Remove the two 15.875 mm Phillips #2 screws from the back panel.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Conair Infiniti Pro Model 259NP Back Panel Replacement
Step 3
Starting from where the cord attaches to the handle, pull apart the two plastic panels.
Continue separating the back panel, working along the seam.
With moderate force, completely remove the back panel from the hair dryer.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-08-24 09:21:29 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Conair Infiniti Pro Model 259NP Back Panel Replacement This guide will cover the removal of the back panel of the hair dryer. This exposes the interior of the hair dryer for further replacements.
Written By: Timothy Lo
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Conair Infiniti Pro Model 259NP Back Panel Replacement
INTRODUCTION In order to replace any internal parts, you first need to take off the back panel of the hair dryer. This guide will show you how to do that.
TOOLS: Phillips #2 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Conair Infiniti Pro Model 259NP Back Panel Replacement
Step 1 — Back Panel
Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.
Hold the hair dryer by the handle so that the back panel faces up.
Step 2
Remove the two 15.875 mm Phillips #2 screws from the back panel.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Conair Infiniti Pro Model 259NP Back Panel Replacement
Step 3
Starting from where the cord attaches to the handle, pull apart the two plastic panels.
Continue separating the back panel, working along the seam.
With moderate force, completely remove the back panel from the hair dryer.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-08-24 09:21:29 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
