Configure GNSS Rover

MicroSurvey FieldGenius Configure GNSS Rover

`

1. Choose Select Instrument from the Map Screen:

Choose GNSS Rover and press Add to add a new one:

2. Choose Edit to edit the newly created Instrument Profile:

`

3. Before connecting go in and set the Antenna Height. Enter the antenna model and the measured height.

4. Then choose the RTK float tolerance. This will ensure that you do not store any points that do not have an RTK solution:

`

5. Go back to Model and Communication and set up your Communication Settings:

If using Bluetooth press the Bluetooth Device List and Search:

Pick your Bluetooth device, this will also add it to your Bluetooth Library:

`

6. Select your Bluetooth Device and press Connect:

7. Press “No” to initialize the raw data logging of GNSS data

8. Configure the radio. Pick the type of radio you have, how it is connected to the device and the data format.

Now press “Setup”

`

9. After you are happy with your radio setup you can then press connect.

10. Check the receiver to ensure you are receiving RTK float corrections.

`