Contact Us!
DIGITAL MONITOR & CONTROLLER QUICK-REFERENCE GUIDE ON-SCREEN ALERTS On-screen alerts can be set to notify you when engine conditions reach your pre-set limits. EGT, engine temp and trans temp are monitored continously.
SYSTEM STATUS
TRANS TEMP
CHECK ENGINE
SEARCH
ENGINE TEMP
OIL TEMP
EGT
FOOT BRAKE
SPEED BRAKE
NAVIGATION ICONS
START UP Turn your vehicle on to turn on Banks iDash.
HOME ICON SHORTCUT TO ‘MODE’ SCREEN. MODE SELECT ICON RETURN TO MODE SELECT SCREEN. RETURN ICON RETURN TO THE PREVIOUS SCREEN. WRENCH ICON GO TO THE ‘ADJUSTMENTS’ MENU.
Contact Us! Gale Banks Engineering 546 Duggan Ave., Azusa, CA 91702 PH (626) 969-9600 Fax (626) 334-1743 bankspower.com ©2017 Gale Banks Engineering
Product Information & Sales: (888) 635-4565 Customer Support: (888) 839-5600 Installation Support: (888) 839-2700 P.N. 96804 v.6.0
Note: If Banks iDash does not turn on make sure the USB interface connection is connected. CHANGING POWER LEVELS From the Power Mode, press the ‘UP’por ‘DOWN’q arrows on the right of the guage screen to increase or decrease the current power level. * “CHANGING POWER SETTINGS”- refer to owner’s manual for further details”
CHANGING BRAKE SETTINGS From the Safety Mode, use the ‘UP’por ‘DOWN’q arrows in the ‘MANUAL’ mode to adjust braking force. Use the ‘UP’por ‘DOWN’q arrows in the ‘AUTO’ mode to raise or lower downhill target cruising speed. * “CHANGING BRAKE SETTINGS”- refer to owner’s manual for further details”
CUSTOMIZE DISPLAY 1. From inside any Mode, press the ‘WRENCH’ open the ‘ADJUSTMENTS’ menu.
icon to
2. Press on the ‘VEHICLE DIAGNOSTICS’ button to check for trouble codes. 3. With the ignition in the ON/RUN position or with the engine running, touch the button labeled ‘CHECK FOR CODES’. NOTE: Vehicle should not be in motion. Follow this procedure after it is determined that any/all diagnosed vehicle problems have been corrected.
2. Choose ‘GAUGE PLACEMENT’, ‘GAUGE COLOR’ or ‘GAUGE STYLE’ to customize your display. 3. Save changes by pressing the ‘HOME’ icon and returning to the ‘MODE’ screen. Press the ‘RETURN’ icon at any time to go back to the previous screen. 4. Change your gauges on-the-fly any time you are in the Monitor Mode. Just press on the gauge you want to change and you will jump to the ‘Gauge Configuration’ screen DIAGNOSTICS MODE Checking and Clearing Codes
1. Press the ‘MODE SELECT’ icon which will take you to the ‘MODE SELECT’ screen. Then press the ‘DIAGNOSTICS’ button.
1. In the ‘MODE SELECT’ screen, press on the ‘DIAGNOSTICS’ button. 2. Press on the ‘VEHICLE DIAGNOSTICS’ button to check for trouble codes. 3. With the ignition in the ON/RUN position or with the engine running, touch the button labeled ‘CHECK FOR CODES’. 4. Touch ‘CLEAR CODES’ to erase them from the vehicle ECU. ON SCREEN ALERTS 1. Press the ‘WRENCH’ icon to move to the ‘ADJUSTMENTS’ menu. 2. Touch the ‘ON SCREEN ALERTS’ button. 3. Touch the desired parameter that will be adjusted. 4. Touch the ‘PLUS’ (+) or ‘MINUS’ (-) buttons to the sides of the parameter description to adjust the set point. 5. Touch the ‘PLUS’ (+) or ‘MINUS’ (-) buttons on the lower part of the screen to set the alarm volume. 6. Repeat steps 3 and 4 to change all desired parameters. 7. Save changes by pressing the ‘HOME’ icon and returning to the ‘MODE’ screen. Press the ‘RETURN’ icon at any time to go back to the previous screen. MODE SCREEN HOT KEYS 1. Press the ‘HOME’ icon any time you see it to return to the ‘MODE’ screen. 2. Press the ‘RETURN’ icon any time you see it to go back one screen at a time. 3. Press on the ‘MODE SELECT’ icon any time you see it to return to the ‘MODE SELECT’ screen.
SYSTEM STATUS
TRANS TEMP
CHECK ENGINE
SEARCH
ENGINE TEMP
OIL TEMP
EGT
FOOT BRAKE
SPEED BRAKE
NAVIGATION ICONS
START UP Turn your vehicle on to turn on Banks iDash.
HOME ICON SHORTCUT TO ‘MODE’ SCREEN. MODE SELECT ICON RETURN TO MODE SELECT SCREEN. RETURN ICON RETURN TO THE PREVIOUS SCREEN. WRENCH ICON GO TO THE ‘ADJUSTMENTS’ MENU.
Contact Us! Gale Banks Engineering 546 Duggan Ave., Azusa, CA 91702 PH (626) 969-9600 Fax (626) 334-1743 bankspower.com ©2017 Gale Banks Engineering
Product Information & Sales: (888) 635-4565 Customer Support: (888) 839-5600 Installation Support: (888) 839-2700 P.N. 96804 v.6.0
Note: If Banks iDash does not turn on make sure the USB interface connection is connected. CHANGING POWER LEVELS From the Power Mode, press the ‘UP’por ‘DOWN’q arrows on the right of the guage screen to increase or decrease the current power level. * “CHANGING POWER SETTINGS”- refer to owner’s manual for further details”
CHANGING BRAKE SETTINGS From the Safety Mode, use the ‘UP’por ‘DOWN’q arrows in the ‘MANUAL’ mode to adjust braking force. Use the ‘UP’por ‘DOWN’q arrows in the ‘AUTO’ mode to raise or lower downhill target cruising speed. * “CHANGING BRAKE SETTINGS”- refer to owner’s manual for further details”
CUSTOMIZE DISPLAY 1. From inside any Mode, press the ‘WRENCH’ open the ‘ADJUSTMENTS’ menu.
icon to
2. Press on the ‘VEHICLE DIAGNOSTICS’ button to check for trouble codes. 3. With the ignition in the ON/RUN position or with the engine running, touch the button labeled ‘CHECK FOR CODES’. NOTE: Vehicle should not be in motion. Follow this procedure after it is determined that any/all diagnosed vehicle problems have been corrected.
2. Choose ‘GAUGE PLACEMENT’, ‘GAUGE COLOR’ or ‘GAUGE STYLE’ to customize your display. 3. Save changes by pressing the ‘HOME’ icon and returning to the ‘MODE’ screen. Press the ‘RETURN’ icon at any time to go back to the previous screen. 4. Change your gauges on-the-fly any time you are in the Monitor Mode. Just press on the gauge you want to change and you will jump to the ‘Gauge Configuration’ screen DIAGNOSTICS MODE Checking and Clearing Codes
1. Press the ‘MODE SELECT’ icon which will take you to the ‘MODE SELECT’ screen. Then press the ‘DIAGNOSTICS’ button.
1. In the ‘MODE SELECT’ screen, press on the ‘DIAGNOSTICS’ button. 2. Press on the ‘VEHICLE DIAGNOSTICS’ button to check for trouble codes. 3. With the ignition in the ON/RUN position or with the engine running, touch the button labeled ‘CHECK FOR CODES’. 4. Touch ‘CLEAR CODES’ to erase them from the vehicle ECU. ON SCREEN ALERTS 1. Press the ‘WRENCH’ icon to move to the ‘ADJUSTMENTS’ menu. 2. Touch the ‘ON SCREEN ALERTS’ button. 3. Touch the desired parameter that will be adjusted. 4. Touch the ‘PLUS’ (+) or ‘MINUS’ (-) buttons to the sides of the parameter description to adjust the set point. 5. Touch the ‘PLUS’ (+) or ‘MINUS’ (-) buttons on the lower part of the screen to set the alarm volume. 6. Repeat steps 3 and 4 to change all desired parameters. 7. Save changes by pressing the ‘HOME’ icon and returning to the ‘MODE’ screen. Press the ‘RETURN’ icon at any time to go back to the previous screen. MODE SCREEN HOT KEYS 1. Press the ‘HOME’ icon any time you see it to return to the ‘MODE’ screen. 2. Press the ‘RETURN’ icon any time you see it to go back one screen at a time. 3. Press on the ‘MODE SELECT’ icon any time you see it to return to the ‘MODE SELECT’ screen.
