contract: heating, ventilating & air conditioning project
CONTRACT: HEATING, VENTILATING & AIR CONDITIONING
PROJECT:
BRIDGEWATER TENANT IMPROVEMENT 2200 ATLANTIC STREET STAMFORD, CT 06902
CONSTRUCTION MANAGER:
BUILDING & LAND TECHNOLOGY 1 ELMCROFT RD STAMFORD, CT 06926
ARCHITECT:
HOK 5 BRYANT PARK 1065 AVENUE OF THE AMERICAS NEW YORK, NY 10018
MECHANICAL ENGINEER:
ROBERT DERECTOR ASSOCIATES 19 WEST 44TH STREET NEW YORK, NY 10036
SUBMISSION FOR APPROVAL ITEM: IEC Fan Coil Units SPECIFICATION SECTION:
15000-HV-21
TAGGING: DATE: June 2, 2016 AMX FILE #: 36019-2 SUBMISSION #: One ENGINEER/ARCHITECT COMMENT
101 Castleton Street, Pleasantville, New York 10570 Phone: (914) 741‐2600
Fax: (914) 741‐2622
www.amxcooling.com
Gil-Bar Industries - Submittal Project Name: Engineer: Contractor: Prepared By: Date: Submittal No.:
Bridgewater Associate – Harbor Point Robert Derector Associates AMX Cooling Danielle Gill 6/1/2016 1
Submittal Based on 4/28/2016 Mechanical Drawings Set
Item A: International Environmental Fan Coil Units
Tag: Model: Voltage: Quantity:
1T HPY06 277/1/60 zero (0)
2T HPY12 277/1/60 one (1)
3T HPY14 277/1/60 zero (0)
4T HPY18 277/1/60 zero (0)
5T HPY20 277/1/60 seven (7)
Units include:
1” supply air duct collar ½” OD copper tube aluminum fin cooling / heating coil 3 speed ECM motor with overload protection Low voltage transformer 1” throwaway filter 1-year parts warranty (parts only)
Not included:
Valves or controls Thermostats DDC controls Condensate pump Cabinet / architectural enclosure Vibration isolation Rigging / installation Labor
5 w 19 St. NYC. 10011 | 212.331.8272 Bridgewater Associate – Harbor Point | 6/1/2016 | 1
1
Project Information Project Name:
Bridgewater Associates
Submitting Contractor: Engineer: Manufacturer’s Rep:
Performance Rating
2T
HPY12 Unit Type: Size: System Type: Coil: Motor Voltage: Motor Type:
Hi-Performance Horizontal Hideaway with Plenum 12 2-Pipe, Cooling Only 4 277/1/60 ECO-2
Fan: ACFM:
High 800
External Static Pressure: Altitude:
0.40 InWC 0 feet
Cooling Conditions Entering Dry Bulb: Entering Wet Bulb: Entering Water Temp: Flow Rate:
78 °F 65 °F 45 °F 5 GPM
Cooling Performance Total Capacity: Sensible Capacity: Leaving Dry Bulb: Leaving Wet Bulb: Leaving Water Temp: Water Pressure Drop:
23874 BTUH 18741 BTUH 56.7 °F 55.2 °F 54.5 °F 3.6 FtWC
Electrical Fan Motor FLA: MCA: MFS:
6.8 8.50 12.0
SCCR:
2KA
International Environmental Corporation ®
[email protected]
V8.0.1P
International Environmental Corporation (IEC) ® works continually to improve its products. As a result, the design and specifications of each product may be changed without notice and may not be as described herein. Please contact IEC for information regarding current design and product specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties but are merely IEC's opinion or commendation of its products. Manufacturer's standard limited warranty applies.
Project Information Project Name:
Bridgewater Associates
Submitting Contractor: Engineer: Manufacturer’s Rep:
Performance Rating
5T
HPY20 Unit Type: Size: System Type: Coil: Motor Voltage: Motor Type:
Hi-Performance Horizontal Hideaway with Plenum 20 2-Pipe, Cooling Only 6 277/1/60 ECO-2
Fan: ACFM:
High 1854
External Static Pressure: Altitude:
0.40 InWC 0 feet
Cooling Conditions Entering Dry Bulb: Entering Wet Bulb: Entering Water Temp: Flow Rate:
78 °F 63 °F 45 °F 12.5 GPM
Cooling Performance Total Capacity: Sensible Capacity: Leaving Dry Bulb: Leaving Wet Bulb: Leaving Water Temp: Water Pressure Drop:
62609 BTUH 53102 BTUH 51.9 °F 51.1 °F 54.9 °F 11.6 FtWC
Electrical Fan Motor FLA: MCA: MFS:
6.8 8.50 12.0
SCCR:
2KA
International Environmental Corporation ®
[email protected]
V8.0.1P
International Environmental Corporation (IEC) ® works continually to improve its products. As a result, the design and specifications of each product may be changed without notice and may not be as described herein. Please contact IEC for information regarding current design and product specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties but are merely IEC's opinion or commendation of its products. Manufacturer's standard limited warranty applies.
Project Information Project Name:
Bridgewater Associates
Submitting Contractor: Engineer: Manufacturer’s Rep:
Mechanical Specifications GENERAL DESCRIPTION – HIGH PERFORMANCE FAN COIL UNITS
HPY – Hi-Performance Hideaway with Plenum
PART 1 – GENERAL
1.1 SUMMARY A. This section includes fan coil units and accessories. 1.2 SYSTEM DESCRIPTION A. Horizontal and Vertical Hi-Performance Fan Coil Units, 2-pipe concealed or exposed cabinets that are horizontally or vertically mounted. 1.3 QUALITY ASSURANCE A. Coils shall be tested in accordance with AHRI Standard 440-2008. Each coil shall be factory tested for leakage at 300 psig air pressure with coil submerged in water. B. Base or “standard” units shall be ETL listed. 1.4 DELIVERY, STORAGE AND HANDLING A. Unit shall be handled and stored in accordance with the manufacturer’s instructions.
PART 2 – PRODUCTS
2.1 MANUFACTURER A. Basis of design shall be fan coils by International Environment Corporation. 2.2 CONFIGURATION A. General: International Environmental Corporation (IEC) ® works continually to improve its products. As a result, the design and specifications of each product may be changed without notice and may not be as described herein. Please contact IEC for information regarding current design and product specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties but are merely IEC's opinion or commendation of its products. Manufacturer's standard limited warranty applies.
1. Factory assembled Hi-Performance horizontal and vertical fan coil units complete with coil, fan, motor, drain pan, and all required wiring, piping and controls. 2. Cabinet shall be made of heavy gauge galvanized steel. 3. The interior surfaces shall be lined with [1/2˝ thick standard fiberglass] insulation. Insulation and adhesive shall meet NFPA-90A requirements for flame spread and smoke generation. 4. Adhesive shall be certified according to the GREENGUARD Indoor Air Quality (IAQ) Certification for Low Emitting Products. Reference Standard: GGPS.001 GREENGUARD IAQ Standard for Building Materials, Finishes, and Furnishings. Reference Standard: GGPS.002 GREENGUARD Children & SchoolsSM Standard. 5. Units shall have a [galvanized] drain pan extending the entire width of the coil. Drain pan shall comply with ASHRAE 62.1-2010. 6. [Galvanized steel drain pans shall be coated internally with a baked-on powder coat rust inhibitor and externally insulated with 2-part closed cell foam insulation.] B. HPY Horizontal Hideaway with Plenum Units: 1. A heavy gauge steel plenum shall enclose the blower/motor assembly with bottom or rear return as indicated on the plans. 2. Units shall be supplied with a collar for supply duct connection. 3. Units shall have [non-woven synthetic throwaway] filter. 2.3 CERTIFICATION A. Safety: Units shall be listed by ETL indicating the units comply with the minimum requirements of the U.S. and Canadian national product safety standard, ANSI/UL Standard 1995, and with CAN/CSA C22.2 No. 236. B. Capacities: Coil capacities are tested in accordance with AHRI Standard 440-2008. 2.4 MATERIALS A. Coils: All coils shall have 1/2˝ copper tubes, [manual] air vent(s), and [aluminum] fins, 10 fins per inch spacing. Coil fins shall be mechanically bonded to copper tubes. Copper tubes must comply with ASTM B-75. Fin thickness shall be 0.0045˝ and tube thickness shall be 0.016˝. All coils shall be leak tested with air at 300 psig under water. B. Valves: 1. For installation in a 2-pipe system, unit shall be equipped with: International Environmental Corporation (IEC) ® works continually to improve its products. As a result, the design and specifications of each product may be changed without notice and may not be as described herein. Please contact IEC for information regarding current design and product specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties but are merely IEC's opinion or commendation of its products. Manufacturer's standard limited warranty applies.
a. 4-row coil as indicated on the plans b. 2 manual ball valves for service c. 1 motorized control valve, 300 psig service, [150 psid ball-type] with quickrelease actuator C. Fans: 1. Fans shall be direct-drive, double-width fan wheels with forward-curved blades. 2. Blower wheels shall be statically and dynamically balanced. 3. Scrolls and fan wheels shall be constructed of galvanized steel. 4. Shall be easily removable. D. Fan Speed and Temperature Control: 1. Three speed (high, medium, low) control, (off, on, auto), wall mounted (auto / manual changeover) thermostat as indicated on the plans. E. Motors: 1. Motors shall be 3-speed, single phase, 60 Hz permanent split capacitor type for [277] volts, permanently lubricated, with ball bearings. F. Controls and Safeties: 1. Controls: a. [Unit shall be furnished with a 3-speed, 4-position fan switch on a wall plate for field installation.] 2. Safeties: a. Unit fan motor shall be equipped with integral motor protection. G. Operating Characteristics: 1. A 2-pipe system shall be capable of providing heating or cooling as determined by the operating mode of the central water supply system. H. Electrical Requirements 1. Standard unit shall operate on [277] volts, single phase, 60 Hz electrical power, and all exposed wiring shall be in flexible conduit. I. Options and Accessories: 3. Units shall be equipped with 24V controls.
International Environmental Corporation (IEC) ® works continually to improve its products. As a result, the design and specifications of each product may be changed without notice and may not be as described herein. Please contact IEC for information regarding current design and product specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties but are merely IEC's opinion or commendation of its products. Manufacturer's standard limited warranty applies.
PROJECT:
BRIDGEWATER TENANT IMPROVEMENT 2200 ATLANTIC STREET STAMFORD, CT 06902
CONSTRUCTION MANAGER:
BUILDING & LAND TECHNOLOGY 1 ELMCROFT RD STAMFORD, CT 06926
ARCHITECT:
HOK 5 BRYANT PARK 1065 AVENUE OF THE AMERICAS NEW YORK, NY 10018
MECHANICAL ENGINEER:
ROBERT DERECTOR ASSOCIATES 19 WEST 44TH STREET NEW YORK, NY 10036
SUBMISSION FOR APPROVAL ITEM: IEC Fan Coil Units SPECIFICATION SECTION:
15000-HV-21
TAGGING: DATE: June 2, 2016 AMX FILE #: 36019-2 SUBMISSION #: One ENGINEER/ARCHITECT COMMENT
101 Castleton Street, Pleasantville, New York 10570 Phone: (914) 741‐2600
Fax: (914) 741‐2622
www.amxcooling.com
Gil-Bar Industries - Submittal Project Name: Engineer: Contractor: Prepared By: Date: Submittal No.:
Bridgewater Associate – Harbor Point Robert Derector Associates AMX Cooling Danielle Gill 6/1/2016 1
Submittal Based on 4/28/2016 Mechanical Drawings Set
Item A: International Environmental Fan Coil Units
Tag: Model: Voltage: Quantity:
1T HPY06 277/1/60 zero (0)
2T HPY12 277/1/60 one (1)
3T HPY14 277/1/60 zero (0)
4T HPY18 277/1/60 zero (0)
5T HPY20 277/1/60 seven (7)
Units include:
1” supply air duct collar ½” OD copper tube aluminum fin cooling / heating coil 3 speed ECM motor with overload protection Low voltage transformer 1” throwaway filter 1-year parts warranty (parts only)
Not included:
Valves or controls Thermostats DDC controls Condensate pump Cabinet / architectural enclosure Vibration isolation Rigging / installation Labor
5 w 19 St. NYC. 10011 | 212.331.8272 Bridgewater Associate – Harbor Point | 6/1/2016 | 1
1
Project Information Project Name:
Bridgewater Associates
Submitting Contractor: Engineer: Manufacturer’s Rep:
Performance Rating
2T
HPY12 Unit Type: Size: System Type: Coil: Motor Voltage: Motor Type:
Hi-Performance Horizontal Hideaway with Plenum 12 2-Pipe, Cooling Only 4 277/1/60 ECO-2
Fan: ACFM:
High 800
External Static Pressure: Altitude:
0.40 InWC 0 feet
Cooling Conditions Entering Dry Bulb: Entering Wet Bulb: Entering Water Temp: Flow Rate:
78 °F 65 °F 45 °F 5 GPM
Cooling Performance Total Capacity: Sensible Capacity: Leaving Dry Bulb: Leaving Wet Bulb: Leaving Water Temp: Water Pressure Drop:
23874 BTUH 18741 BTUH 56.7 °F 55.2 °F 54.5 °F 3.6 FtWC
Electrical Fan Motor FLA: MCA: MFS:
6.8 8.50 12.0
SCCR:
2KA
International Environmental Corporation ®
[email protected]
V8.0.1P
International Environmental Corporation (IEC) ® works continually to improve its products. As a result, the design and specifications of each product may be changed without notice and may not be as described herein. Please contact IEC for information regarding current design and product specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties but are merely IEC's opinion or commendation of its products. Manufacturer's standard limited warranty applies.
Project Information Project Name:
Bridgewater Associates
Submitting Contractor: Engineer: Manufacturer’s Rep:
Performance Rating
5T
HPY20 Unit Type: Size: System Type: Coil: Motor Voltage: Motor Type:
Hi-Performance Horizontal Hideaway with Plenum 20 2-Pipe, Cooling Only 6 277/1/60 ECO-2
Fan: ACFM:
High 1854
External Static Pressure: Altitude:
0.40 InWC 0 feet
Cooling Conditions Entering Dry Bulb: Entering Wet Bulb: Entering Water Temp: Flow Rate:
78 °F 63 °F 45 °F 12.5 GPM
Cooling Performance Total Capacity: Sensible Capacity: Leaving Dry Bulb: Leaving Wet Bulb: Leaving Water Temp: Water Pressure Drop:
62609 BTUH 53102 BTUH 51.9 °F 51.1 °F 54.9 °F 11.6 FtWC
Electrical Fan Motor FLA: MCA: MFS:
6.8 8.50 12.0
SCCR:
2KA
International Environmental Corporation ®
[email protected]
V8.0.1P
International Environmental Corporation (IEC) ® works continually to improve its products. As a result, the design and specifications of each product may be changed without notice and may not be as described herein. Please contact IEC for information regarding current design and product specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties but are merely IEC's opinion or commendation of its products. Manufacturer's standard limited warranty applies.
Project Information Project Name:
Bridgewater Associates
Submitting Contractor: Engineer: Manufacturer’s Rep:
Mechanical Specifications GENERAL DESCRIPTION – HIGH PERFORMANCE FAN COIL UNITS
HPY – Hi-Performance Hideaway with Plenum
PART 1 – GENERAL
1.1 SUMMARY A. This section includes fan coil units and accessories. 1.2 SYSTEM DESCRIPTION A. Horizontal and Vertical Hi-Performance Fan Coil Units, 2-pipe concealed or exposed cabinets that are horizontally or vertically mounted. 1.3 QUALITY ASSURANCE A. Coils shall be tested in accordance with AHRI Standard 440-2008. Each coil shall be factory tested for leakage at 300 psig air pressure with coil submerged in water. B. Base or “standard” units shall be ETL listed. 1.4 DELIVERY, STORAGE AND HANDLING A. Unit shall be handled and stored in accordance with the manufacturer’s instructions.
PART 2 – PRODUCTS
2.1 MANUFACTURER A. Basis of design shall be fan coils by International Environment Corporation. 2.2 CONFIGURATION A. General: International Environmental Corporation (IEC) ® works continually to improve its products. As a result, the design and specifications of each product may be changed without notice and may not be as described herein. Please contact IEC for information regarding current design and product specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties but are merely IEC's opinion or commendation of its products. Manufacturer's standard limited warranty applies.
1. Factory assembled Hi-Performance horizontal and vertical fan coil units complete with coil, fan, motor, drain pan, and all required wiring, piping and controls. 2. Cabinet shall be made of heavy gauge galvanized steel. 3. The interior surfaces shall be lined with [1/2˝ thick standard fiberglass] insulation. Insulation and adhesive shall meet NFPA-90A requirements for flame spread and smoke generation. 4. Adhesive shall be certified according to the GREENGUARD Indoor Air Quality (IAQ) Certification for Low Emitting Products. Reference Standard: GGPS.001 GREENGUARD IAQ Standard for Building Materials, Finishes, and Furnishings. Reference Standard: GGPS.002 GREENGUARD Children & SchoolsSM Standard. 5. Units shall have a [galvanized] drain pan extending the entire width of the coil. Drain pan shall comply with ASHRAE 62.1-2010. 6. [Galvanized steel drain pans shall be coated internally with a baked-on powder coat rust inhibitor and externally insulated with 2-part closed cell foam insulation.] B. HPY Horizontal Hideaway with Plenum Units: 1. A heavy gauge steel plenum shall enclose the blower/motor assembly with bottom or rear return as indicated on the plans. 2. Units shall be supplied with a collar for supply duct connection. 3. Units shall have [non-woven synthetic throwaway] filter. 2.3 CERTIFICATION A. Safety: Units shall be listed by ETL indicating the units comply with the minimum requirements of the U.S. and Canadian national product safety standard, ANSI/UL Standard 1995, and with CAN/CSA C22.2 No. 236. B. Capacities: Coil capacities are tested in accordance with AHRI Standard 440-2008. 2.4 MATERIALS A. Coils: All coils shall have 1/2˝ copper tubes, [manual] air vent(s), and [aluminum] fins, 10 fins per inch spacing. Coil fins shall be mechanically bonded to copper tubes. Copper tubes must comply with ASTM B-75. Fin thickness shall be 0.0045˝ and tube thickness shall be 0.016˝. All coils shall be leak tested with air at 300 psig under water. B. Valves: 1. For installation in a 2-pipe system, unit shall be equipped with: International Environmental Corporation (IEC) ® works continually to improve its products. As a result, the design and specifications of each product may be changed without notice and may not be as described herein. Please contact IEC for information regarding current design and product specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties but are merely IEC's opinion or commendation of its products. Manufacturer's standard limited warranty applies.
a. 4-row coil as indicated on the plans b. 2 manual ball valves for service c. 1 motorized control valve, 300 psig service, [150 psid ball-type] with quickrelease actuator C. Fans: 1. Fans shall be direct-drive, double-width fan wheels with forward-curved blades. 2. Blower wheels shall be statically and dynamically balanced. 3. Scrolls and fan wheels shall be constructed of galvanized steel. 4. Shall be easily removable. D. Fan Speed and Temperature Control: 1. Three speed (high, medium, low) control, (off, on, auto), wall mounted (auto / manual changeover) thermostat as indicated on the plans. E. Motors: 1. Motors shall be 3-speed, single phase, 60 Hz permanent split capacitor type for [277] volts, permanently lubricated, with ball bearings. F. Controls and Safeties: 1. Controls: a. [Unit shall be furnished with a 3-speed, 4-position fan switch on a wall plate for field installation.] 2. Safeties: a. Unit fan motor shall be equipped with integral motor protection. G. Operating Characteristics: 1. A 2-pipe system shall be capable of providing heating or cooling as determined by the operating mode of the central water supply system. H. Electrical Requirements 1. Standard unit shall operate on [277] volts, single phase, 60 Hz electrical power, and all exposed wiring shall be in flexible conduit. I. Options and Accessories: 3. Units shall be equipped with 24V controls.
International Environmental Corporation (IEC) ® works continually to improve its products. As a result, the design and specifications of each product may be changed without notice and may not be as described herein. Please contact IEC for information regarding current design and product specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties but are merely IEC's opinion or commendation of its products. Manufacturer's standard limited warranty applies.
