Corsair K65 disassembly Water Damage cleaning
Corsair K65 disassembly Water Damage cleaning
Corsair K65 disassembly Water Damage cleaning How to open up a Corsair K65 Keyboard to fix water damage (or any other kind of damage that will require access to the inside of the keyboard).
作成者: Michael Le
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠1ページ目
Corsair K65 disassembly Water Damage cleaning
はじめに Did you spill coffee or any other liquid on your Corsair K65? Or do you just need to open up the keyboard to access the interior? This guide will teach you how to do either one of those!
ツール: Phillips #000 Screwdriver (1) Sharp knife (1) Cotton Swabs (1) High Content Rubbing Alcohol (1)
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠2ページ目
Corsair K65 disassembly Water Damage cleaning
手順 1 — Corsair K65 disassembly Water Damage cleaning
Unplug your keyboard. The wire is located near the back and on the bottom of the keyboard.
Place your keyboard onto a workspace with plenty of room.
手順 2
Pry each keycap off by grabbing the keycap with your fingers and pulling directly up.
Pulling the keycaps off at an angle may damage the keys or the switches on the keyboard. A specialized tool to remove the keycaps will make this process a lot easier and faster, but is not required.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠3ページ目
Corsair K65 disassembly Water Damage cleaning
手順 3
Unscrew the exposed 9mm Phillips #0 screws with your mini Phillips #0 screwdriver.
There should be 17 exposed screws in total. 手順 4
Peel back the Corsair logo with a knife.
Remove the logo, exposing another 9mm Phillips #0 screw.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠4ページ目
Corsair K65 disassembly Water Damage cleaning
手順 5
Unscrew the now exposed 9mm Phillips #0 screw.
There should now be a total of 18 9mm Phillips #0 screws. 手順 6
Carefully separate the bottom half of the keyboard from the top half of the keyboard.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠5ページ目
Corsair K65 disassembly Water Damage cleaning
手順 7
Apply the rubbing alcohol to your cotton pad.
手順 8
Wipe down the affected parts of the keyboard interior with the alcoholsoaked pad.
Allow the interior of the keyboard to dry for a few minutes before reassembling the keyboard.
To reassemble your device, follow these instructions in reverse order. この文書の最終更新日は 2017-09-03 09:03:54 PMです。
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠6ページ目
Corsair K65 disassembly Water Damage cleaning
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠7ページ目
Corsair K65 disassembly Water Damage cleaning How to open up a Corsair K65 Keyboard to fix water damage (or any other kind of damage that will require access to the inside of the keyboard).
作成者: Michael Le
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠1ページ目
Corsair K65 disassembly Water Damage cleaning
はじめに Did you spill coffee or any other liquid on your Corsair K65? Or do you just need to open up the keyboard to access the interior? This guide will teach you how to do either one of those!
ツール: Phillips #000 Screwdriver (1) Sharp knife (1) Cotton Swabs (1) High Content Rubbing Alcohol (1)
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠2ページ目
Corsair K65 disassembly Water Damage cleaning
手順 1 — Corsair K65 disassembly Water Damage cleaning
Unplug your keyboard. The wire is located near the back and on the bottom of the keyboard.
Place your keyboard onto a workspace with plenty of room.
手順 2
Pry each keycap off by grabbing the keycap with your fingers and pulling directly up.
Pulling the keycaps off at an angle may damage the keys or the switches on the keyboard. A specialized tool to remove the keycaps will make this process a lot easier and faster, but is not required.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠3ページ目
Corsair K65 disassembly Water Damage cleaning
手順 3
Unscrew the exposed 9mm Phillips #0 screws with your mini Phillips #0 screwdriver.
There should be 17 exposed screws in total. 手順 4
Peel back the Corsair logo with a knife.
Remove the logo, exposing another 9mm Phillips #0 screw.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠4ページ目
Corsair K65 disassembly Water Damage cleaning
手順 5
Unscrew the now exposed 9mm Phillips #0 screw.
There should now be a total of 18 9mm Phillips #0 screws. 手順 6
Carefully separate the bottom half of the keyboard from the top half of the keyboard.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠5ページ目
Corsair K65 disassembly Water Damage cleaning
手順 7
Apply the rubbing alcohol to your cotton pad.
手順 8
Wipe down the affected parts of the keyboard interior with the alcoholsoaked pad.
Allow the interior of the keyboard to dry for a few minutes before reassembling the keyboard.
To reassemble your device, follow these instructions in reverse order. この文書の最終更新日は 2017-09-03 09:03:54 PMです。
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠6ページ目
Corsair K65 disassembly Water Damage cleaning
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠7ページ目
